1 files changed, 30 insertions, 78 deletions

diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index b9444ee08da9..f67af3c1b963 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -48,6 +48,14 @@ struct max1586_data {
 };
 
 /*
+ * V6 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ *   set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
+ * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
+ */
+static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
+
+/*
  * V3 voltage
  * On I2C bus, sending a "x" byte to the max1586 means :
  *   set V3 to 0.700V + (x & 0x1f) * 0.025V
@@ -55,113 +63,49 @@ struct max1586_data {
  * R24 and R25=100kOhm as described in the data sheet.
  * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
  */
-static int max1586_v3_calc_voltage(struct max1586_data *max1586,
-	unsigned selector)
-{
-	unsigned range_uV = max1586->max_uV - max1586->min_uV;
-
-	return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
-}
-
-static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV,
-			  unsigned *selector)
+static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
+				      unsigned selector)
 {
 	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
 	struct i2c_client *client = max1586->client;
-	unsigned range_uV = max1586->max_uV - max1586->min_uV;
 	u8 v3_prog;
 
-	if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
-		return -EINVAL;
-	if (min_uV < max1586->min_uV)
-		min_uV = max1586->min_uV;
-
-	*selector = DIV_ROUND_UP((min_uV - max1586->min_uV) *
-				 MAX1586_V3_MAX_VSEL, range_uV);
-	if (max1586_v3_calc_voltage(max1586, *selector) > max_uV)
-		return -EINVAL;
-
 	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
-		max1586_v3_calc_voltage(max1586, *selector) / 1000);
+		regulator_list_voltage_linear(rdev, selector) / 1000);
 
-	v3_prog = I2C_V3_SELECT | (u8) *selector;
+	v3_prog = I2C_V3_SELECT | (u8) selector;
 	return i2c_smbus_write_byte(client, v3_prog);
 }
 
-static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
-{
-	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
-
-	if (selector > MAX1586_V3_MAX_VSEL)
-		return -EINVAL;
-	return max1586_v3_calc_voltage(max1586, selector);
-}
-
-/*
- * V6 voltage
- * On I2C bus, sending a "x" byte to the max1586 means :
- *   set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
- * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
- */
-static int max1586_v6_calc_voltage(unsigned selector)
-{
-	static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
-
-	return voltages_uv[selector];
-}
-
-static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV,
-			  unsigned int *selector)
+static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
+				      unsigned int selector)
 {
 	struct i2c_client *client = rdev_get_drvdata(rdev);
 	u8 v6_prog;
 
-	if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV)
-		return -EINVAL;
-	if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
-		return -EINVAL;
-
-	if (min_uV < 1800000)
-		*selector = 0;
-	else if (min_uV < 2500000)
-		*selector = 1;
-	else if (min_uV < 3000000)
-		*selector = 2;
-	else if (min_uV >= 3000000)
-		*selector = 3;
-
-	if (max1586_v6_calc_voltage(*selector) > max_uV)
-		return -EINVAL;
-
 	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
-		max1586_v6_calc_voltage(*selector) / 1000);
+		rdev->desc->volt_table[selector] / 1000);
 
-	v6_prog = I2C_V6_SELECT | (u8) *selector;
+	v6_prog = I2C_V6_SELECT | (u8) selector;
 	return i2c_smbus_write_byte(client, v6_prog);
 }
 
-static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector)
-{
-	if (selector > MAX1586_V6_MAX_VSEL)
-		return -EINVAL;
-	return max1586_v6_calc_voltage(selector);
-}
-
 /*
  * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
  * the set up value.
  */
 static struct regulator_ops max1586_v3_ops = {
-	.set_voltage = max1586_v3_set,
-	.list_voltage = max1586_v3_list,
+	.set_voltage_sel = max1586_v3_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
 };
 
 static struct regulator_ops max1586_v6_ops = {
-	.set_voltage = max1586_v6_set,
-	.list_voltage = max1586_v6_list,
+	.set_voltage_sel = max1586_v6_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_table,
 };
 
-static const struct regulator_desc max1586_reg[] = {
+static struct regulator_desc max1586_reg[] = {
 	{
 		.name = "Output_V3",
 		.id = MAX1586_V3,
@@ -176,6 +120,7 @@ static const struct regulator_desc max1586_reg[] = {
 		.ops = &max1586_v6_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = MAX1586_V6_MAX_VSEL + 1,
+		.volt_table = v6_voltages_uv,
 		.owner = THIS_MODULE,
 	},
 };
@@ -213,6 +158,13 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
 			goto err;
 		}
 
+		if (id == MAX1586_V3) {
+			max1586_reg[id].min_uV = max1586->min_uV;
+			max1586_reg[id].uV_step =
+					(max1586->max_uV - max1586->min_uV) /
+					MAX1586_V3_MAX_VSEL;
+		}
+
 		config.dev = &client->dev;
 		config.init_data = pdata->subdevs[i].platform_data;
 		config.driver_data = max1586;