diff options
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-ufs-i.h')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs-i.h | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h new file mode 100644 index 000000000000..13b02b7de30b --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h @@ -0,0 +1,155 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_I_H_ +#define UFS_QCOM_PHY_I_H_ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/phy/phy-qcom-ufs.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/delay.h> + +#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \ +({ \ + ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \ + might_sleep_if(timeout_us); \ + for (;;) { \ + (val) = readl(addr); \ + if (cond) \ + break; \ + if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \ + (val) = readl(addr); \ + break; \ + } \ + if (sleep_us) \ + usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \ + } \ + (cond) ? 0 : -ETIMEDOUT; \ +}) + +#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \ + { \ + .reg_offset = reg, \ + .cfg_value = val, \ + } + +#define UFS_QCOM_PHY_NAME_LEN 30 + +enum { + MASK_SERDES_START = 0x1, + MASK_PCS_READY = 0x1, +}; + +enum { + OFFSET_SERDES_START = 0x0, +}; + +struct ufs_qcom_phy_stored_attributes { + u32 att; + u32 value; +}; + + +struct ufs_qcom_phy_calibration { + u32 reg_offset; + u32 cfg_value; +}; + +struct ufs_qcom_phy_vreg { + const char *name; + struct regulator *reg; + int max_uA; + int min_uV; + int max_uV; + bool enabled; +}; + +struct ufs_qcom_phy { + struct list_head list; + struct device *dev; + void __iomem *mmio; + void __iomem *dev_ref_clk_ctrl_mmio; + struct clk *tx_iface_clk; + struct clk *rx_iface_clk; + bool is_iface_clk_enabled; + struct clk *ref_clk_src; + struct clk *ref_clk_parent; + struct clk *ref_clk; + bool is_ref_clk_enabled; + bool is_dev_ref_clk_enabled; + struct ufs_qcom_phy_vreg vdda_pll; + struct ufs_qcom_phy_vreg vdda_phy; + struct ufs_qcom_phy_vreg vddp_ref_clk; + unsigned int quirks; + + /* + * If UFS link is put into Hibern8 and if UFS PHY analog hardware is + * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8 + * exit might fail even after powering on UFS PHY analog hardware. + * Enabling this quirk will help to solve above issue by doing + * custom PHY settings just before PHY analog power collapse. + */ + #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0) + + u8 host_ctrl_rev_major; + u16 host_ctrl_rev_minor; + u16 host_ctrl_rev_step; + + char name[UFS_QCOM_PHY_NAME_LEN]; + struct ufs_qcom_phy_calibration *cached_regs; + int cached_regs_table_size; + bool is_powered_on; + struct ufs_qcom_phy_specific_ops *phy_spec_ops; +}; + +/** + * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a + * specific implementation per phy. Each UFS phy, should implement + * those functions according to its spec and requirements + * @calibrate_phy: pointer to a function that calibrate the phy + * @start_serdes: pointer to a function that starts the serdes + * @is_physical_coding_sublayer_ready: pointer to a function that + * checks pcs readiness. returns 0 for success and non-zero for error. + * @set_tx_lane_enable: pointer to a function that enable tx lanes + * @power_control: pointer to a function that controls analog rail of phy + * and writes to QSERDES_RX_SIGDET_CNTRL attribute + */ +struct ufs_qcom_phy_specific_ops { + int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B); + void (*start_serdes)(struct ufs_qcom_phy *phy); + int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy); + void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val); + void (*power_control)(struct ufs_qcom_phy *phy, bool val); +}; + +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy); +int ufs_qcom_phy_power_on(struct phy *generic_phy); +int ufs_qcom_phy_power_off(struct phy *generic_phy); +int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common); +int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common); +int ufs_qcom_phy_remove(struct phy *generic_phy, + struct ufs_qcom_phy *ufs_qcom_phy); +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, + struct ufs_qcom_phy *common_cfg, + const struct phy_ops *ufs_qcom_phy_gen_ops, + struct ufs_qcom_phy_specific_ops *phy_spec_ops); +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A, + struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B, + bool is_rate_B); +#endif |