diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/phy/bcm7xxx.c | 215 |
1 files changed, 213 insertions, 2 deletions
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index d1c2614dad3a..caa9f6e17f34 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -1,7 +1,7 @@ /* * Broadcom BCM7xxx internal transceivers support. * - * Copyright (C) 2014, Broadcom Corporation + * Copyright (C) 2014-2017 Broadcom * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,7 +19,7 @@ /* Broadcom BCM7xxx internal PHY registers */ -/* 40nm only register definitions */ +/* EPHY only register definitions */ #define MII_BCM7XXX_100TX_AUX_CTL 0x10 #define MII_BCM7XXX_100TX_FALSE_CAR 0x13 #define MII_BCM7XXX_100TX_DISC 0x14 @@ -27,6 +27,19 @@ #define MII_BCM7XXX_64CLK_MDIO BIT(12) #define MII_BCM7XXX_TEST 0x1f #define MII_BCM7XXX_SHD_MODE_2 BIT(2) +#define MII_BCM7XXX_SHD_2_ADDR_CTRL 0xe +#define MII_BCM7XXX_SHD_2_CTRL_STAT 0xf +#define MII_BCM7XXX_SHD_2_BIAS_TRIM 0x1a +#define MII_BCM7XXX_SHD_3_AN_EEE_ADV 0x3 +#define MII_BCM7XXX_SHD_3_PCS_CTRL_2 0x6 +#define MII_BCM7XXX_PCS_CTRL_2_DEF 0x4400 +#define MII_BCM7XXX_SHD_3_AN_STAT 0xb +#define MII_BCM7XXX_AN_NULL_MSG_EN BIT(0) +#define MII_BCM7XXX_AN_EEE_EN BIT(1) +#define MII_BCM7XXX_SHD_3_EEE_THRESH 0xe +#define MII_BCM7XXX_EEE_THRESH_DEF 0x50 +#define MII_BCM7XXX_SHD_3_TL4 0x23 +#define MII_BCM7XXX_TL4_RST_MSK (BIT(2) | BIT(1)) /* 28nm only register definitions */ #define MISC_ADDR(base, channel) base, channel @@ -286,6 +299,181 @@ static int phy_set_clr_bits(struct phy_device *dev, int location, return v; } +static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev) +{ + int ret; + + /* set shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Set current trim values INT_trim = -1, Ext_trim =0 */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_BIAS_TRIM, 0x3BE0); + if (ret < 0) + goto reset_shadow_mode; + + /* Cal reset */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_TL4); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + MII_BCM7XXX_TL4_RST_MSK, 0); + if (ret < 0) + goto reset_shadow_mode; + + /* Cal reset disable */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_TL4); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + 0, MII_BCM7XXX_TL4_RST_MSK); + if (ret < 0) + goto reset_shadow_mode; + +reset_shadow_mode: + /* reset shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); + if (ret < 0) + return ret; + + return 0; +} + +/* The 28nm EPHY does not support Clause 45 (MMD) used by bcm-phy-lib */ +static int bcm7xxx_28nm_ephy_apd_enable(struct phy_device *phydev) +{ + int ret; + + /* set shadow mode 1 */ + ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, + MII_BRCM_FET_BT_SRE, 0); + if (ret < 0) + return ret; + + /* Enable auto-power down */ + ret = phy_set_clr_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2, + MII_BRCM_FET_SHDW_AS2_APDE, 0); + if (ret < 0) + return ret; + + /* reset shadow mode 1 */ + ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, 0, + MII_BRCM_FET_BT_SRE); + if (ret < 0) + return ret; + + return 0; +} + +static int bcm7xxx_28nm_ephy_eee_enable(struct phy_device *phydev) +{ + int ret; + + /* set shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Advertise supported modes */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_AN_EEE_ADV); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + MDIO_EEE_100TX); + if (ret < 0) + goto reset_shadow_mode; + + /* Restore Defaults */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_PCS_CTRL_2); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + MII_BCM7XXX_PCS_CTRL_2_DEF); + if (ret < 0) + goto reset_shadow_mode; + + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_EEE_THRESH); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + MII_BCM7XXX_EEE_THRESH_DEF); + if (ret < 0) + goto reset_shadow_mode; + + /* Enable EEE autonegotiation */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_AN_STAT); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + (MII_BCM7XXX_AN_NULL_MSG_EN | MII_BCM7XXX_AN_EEE_EN)); + if (ret < 0) + goto reset_shadow_mode; + +reset_shadow_mode: + /* reset shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); + if (ret < 0) + return ret; + + /* Restart autoneg */ + phy_write(phydev, MII_BMCR, + (BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART)); + + return 0; +} + +static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev) +{ + u8 rev = phydev->phy_id & ~phydev->drv->phy_id_mask; + int ret = 0; + + pr_info_once("%s: %s PHY revision: 0x%02x\n", + phydev_name(phydev), phydev->drv->name, rev); + + /* Dummy read to a register to workaround a possible issue upon reset + * where the internal inverter may not allow the first MDIO transaction + * to pass the MDIO management controller and make us return 0xffff for + * such reads. + */ + phy_read(phydev, MII_BMSR); + + /* Apply AFE software work-around if necessary */ + if (rev == 0x01) { + ret = bcm7xxx_28nm_ephy_01_afe_config_init(phydev); + if (ret) + return ret; + } + + ret = bcm7xxx_28nm_ephy_eee_enable(phydev); + if (ret) + return ret; + + return bcm7xxx_28nm_ephy_apd_enable(phydev); +} + +static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev) +{ + int ret; + + /* Re-apply workarounds coming out suspend/resume */ + ret = bcm7xxx_28nm_ephy_config_init(phydev); + if (ret) + return ret; + + return genphy_config_aneg(phydev); +} + static int bcm7xxx_config_init(struct phy_device *phydev) { int ret; @@ -434,6 +622,23 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev) .probe = bcm7xxx_28nm_probe, \ } +#define BCM7XXX_28NM_EPHY(_oui, _name) \ +{ \ + .phy_id = (_oui), \ + .phy_id_mask = 0xfffffff0, \ + .name = _name, \ + .features = PHY_BASIC_FEATURES, \ + .flags = PHY_IS_INTERNAL, \ + .config_init = bcm7xxx_28nm_ephy_config_init, \ + .config_aneg = genphy_config_aneg, \ + .read_status = genphy_read_status, \ + .resume = bcm7xxx_28nm_ephy_resume, \ + .get_sset_count = bcm_phy_get_sset_count, \ + .get_strings = bcm_phy_get_strings, \ + .get_stats = bcm7xxx_28nm_get_phy_stats, \ + .probe = bcm7xxx_28nm_probe, \ +} + #define BCM7XXX_40NM_EPHY(_oui, _name) \ { \ .phy_id = (_oui), \ @@ -450,6 +655,9 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev) static struct phy_driver bcm7xxx_driver[] = { BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), + BCM7XXX_28NM_EPHY(PHY_ID_BCM7260, "Broadcom BCM7260"), + BCM7XXX_28NM_EPHY(PHY_ID_BCM7268, "Broadcom BCM7268"), + BCM7XXX_28NM_EPHY(PHY_ID_BCM7271, "Broadcom BCM7271"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"), @@ -466,6 +674,9 @@ static struct phy_driver bcm7xxx_driver[] = { static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { { PHY_ID_BCM7250, 0xfffffff0, }, + { PHY_ID_BCM7260, 0xfffffff0, }, + { PHY_ID_BCM7268, 0xfffffff0, }, + { PHY_ID_BCM7271, 0xfffffff0, }, { PHY_ID_BCM7278, 0xfffffff0, }, { PHY_ID_BCM7364, 0xfffffff0, }, { PHY_ID_BCM7366, 0xfffffff0, }, |