diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-3945.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-4965.c | 5 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl3945-base.c | 183 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl4965-base.c | 187 |
4 files changed, 217 insertions, 166 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 77e7202c026b..0779a23729e5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -1004,14 +1004,6 @@ int iwl3945_hw_nic_init(struct iwl3945_priv *priv) CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MM); } - spin_unlock_irqrestore(&priv->lock, flags); - - /* Initialize the EEPROM */ - rc = iwl3945_eeprom_init(priv); - if (rc) - return rc; - - spin_lock_irqsave(&priv->lock, flags); if (EEPROM_SKU_CAP_OP_MODE_MRC == priv->eeprom.sku_cap) { IWL_DEBUG_INFO("SKU OP mode is mrc\n"); iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index e6a0397266fc..5fcc2a6f5bf4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -506,11 +506,6 @@ int iwl4965_hw_nic_init(struct iwl4965_priv *priv) spin_unlock_irqrestore(&priv->lock, flags); - /* Read the EEPROM */ - rc = iwl4965_eeprom_init(priv); - if (rc) - return rc; - if (priv->eeprom.calib_version < EEPROM_TX_POWER_VERSION_NEW) { IWL_ERROR("Older EEPROM detected! Aborting.\n"); return -EINVAL; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 1830e13d5cfd..e0e9bbdf140f 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6179,31 +6179,12 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) } iwl3945_init_geos(priv); + iwl3945_reset_channel_flag(priv); if (iwl3945_is_rfkill(priv)) return; - if (!priv->mac80211_registered) { - /* Unlock so any user space entry points can call back into - * the driver without a deadlock... */ - mutex_unlock(&priv->mutex); - iwl3945_rate_control_register(priv->hw); - rc = ieee80211_register_hw(priv->hw); - priv->hw->conf.beacon_int = 100; - mutex_lock(&priv->mutex); - - if (rc) { - iwl3945_rate_control_unregister(priv->hw); - IWL_ERROR("Failed to register network " - "device (error %d)\n", rc); - return; - } - - priv->mac80211_registered = 1; - - iwl3945_reset_channel_flag(priv); - } else - ieee80211_start_queues(priv->hw); + ieee80211_start_queues(priv->hw); priv->active_rate = priv->rates_mask; priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; @@ -6236,6 +6217,7 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) iwl3945_reg_txpower_periodic(priv); IWL_DEBUG_INFO("ALIVE processing complete.\n"); + wake_up_interruptible(&priv->wait_command_queue); if (priv->error_recovering) iwl3945_error_recovery(priv); @@ -6348,7 +6330,6 @@ static void iwl3945_down(struct iwl3945_priv *priv) static int __iwl3945_up(struct iwl3945_priv *priv) { - DECLARE_MAC_BUF(mac); int rc, i; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { @@ -6392,7 +6373,7 @@ static int __iwl3945_up(struct iwl3945_priv *priv) * This will be used to initialize the on-board processor's * data SRAM for a clean start when the runtime program first loads. */ memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, - priv->ucode_data.len); + priv->ucode_data.len); for (i = 0; i < MAX_HW_RESTARTS; i++) { @@ -6411,13 +6392,6 @@ static int __iwl3945_up(struct iwl3945_priv *priv) /* start card; "initialize" will load runtime ucode */ iwl3945_nic_start(priv); - /* MAC Address location in EEPROM is same for 3945/4965 */ - get_eeprom_mac(priv, priv->mac_addr); - IWL_DEBUG_INFO("MAC address: %s\n", - print_mac(mac, priv->mac_addr)); - - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - IWL_DEBUG_INFO(DRV_NAME " is coming up\n"); return 0; @@ -6906,23 +6880,73 @@ static void iwl3945_bg_scan_completed(struct work_struct *work) * *****************************************************************************/ +#define UCODE_READY_TIMEOUT (2 * HZ) + static int iwl3945_mac_start(struct ieee80211_hw *hw) { struct iwl3945_priv *priv = hw->priv; + int ret; IWL_DEBUG_MAC80211("enter\n"); + if (pci_enable_device(priv->pci_dev)) { + IWL_ERROR("Fail to pci_enable_device\n"); + return -ENODEV; + } + pci_restore_state(priv->pci_dev); + pci_enable_msi(priv->pci_dev); + + ret = request_irq(priv->pci_dev->irq, iwl3945_isr, IRQF_SHARED, + DRV_NAME, priv); + if (ret) { + IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq); + goto out_disable_msi; + } + /* we should be verifying the device is ready to be opened */ mutex_lock(&priv->mutex); - priv->is_open = 1; + memset(&priv->staging_rxon, 0, sizeof(struct iwl3945_rxon_cmd)); + /* fetch ucode file from disk, alloc and copy to bus-master buffers ... + * ucode filename and max sizes are card-specific. */ - if (!iwl3945_is_rfkill(priv)) - ieee80211_start_queues(priv->hw); + if (!priv->ucode_code.len) { + ret = iwl3945_read_ucode(priv); + if (ret) { + IWL_ERROR("Could not read microcode: %d\n", ret); + mutex_unlock(&priv->mutex); + goto out_release_irq; + } + } + IWL_DEBUG_INFO("Start UP work.\n"); + __iwl3945_up(priv); + + priv->is_open = 1; mutex_unlock(&priv->mutex); + + /* Wait for START_ALIVE from ucode. Otherwise callbacks from + * mac80211 will not be run successfully. */ + ret = wait_event_interruptible_timeout(priv->wait_command_queue, + test_bit(STATUS_READY, &priv->status), + UCODE_READY_TIMEOUT); + if (!ret) { + if (!test_bit(STATUS_READY, &priv->status)) { + IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n", + jiffies_to_msecs(UCODE_READY_TIMEOUT)); + ret = -ETIMEDOUT; + goto out_release_irq; + } + } + IWL_DEBUG_MAC80211("leave\n"); return 0; + +out_release_irq: + free_irq(priv->pci_dev->irq, priv); +out_disable_msi: + pci_disable_msi(priv->pci_dev); + return ret; } static void iwl3945_mac_stop(struct ieee80211_hw *hw) @@ -6931,23 +6955,25 @@ static void iwl3945_mac_stop(struct ieee80211_hw *hw) IWL_DEBUG_MAC80211("enter\n"); - - mutex_lock(&priv->mutex); /* stop mac, cancel any scan request and clear * RXON_FILTER_ASSOC_MSK BIT */ priv->is_open = 0; - if (!iwl3945_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - RF not ready\n"); + + if (iwl3945_is_ready_rf(priv)) { + mutex_lock(&priv->mutex); + iwl3945_scan_cancel_timeout(priv, 100); + cancel_delayed_work(&priv->post_associate); mutex_unlock(&priv->mutex); - return; } - iwl3945_scan_cancel_timeout(priv, 100); - cancel_delayed_work(&priv->post_associate); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl3945_commit_rxon(priv); - mutex_unlock(&priv->mutex); + iwl3945_down(priv); + + flush_workqueue(priv->workqueue); + free_irq(priv->pci_dev->irq, priv); + pci_disable_msi(priv->pci_dev); + pci_save_state(priv->pci_dev); + pci_disable_device(priv->pci_dev); IWL_DEBUG_MAC80211("leave\n"); } @@ -7000,11 +7026,12 @@ static int iwl3945_mac_add_interface(struct ieee80211_hw *hw, memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); } - iwl3945_set_mode(priv, conf->type); + if (iwl3945_is_ready(priv)) + iwl3945_set_mode(priv, conf->type); - IWL_DEBUG_MAC80211("leave\n"); mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211("leave\n"); return 0; } @@ -7178,6 +7205,9 @@ static int iwl3945_mac_config_interface(struct ieee80211_hw *hw, return 0; } + if (!iwl3945_is_alive(priv)) + return -EAGAIN; + mutex_lock(&priv->mutex); if (conf->bssid) @@ -8390,6 +8420,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e struct iwl3945_priv *priv; struct ieee80211_hw *hw; int i; + DECLARE_MAC_BUF(mac); /* Disabling hardware scan means that mac80211 will perform scans * "the hard way", rather than using device's scan. */ @@ -8542,7 +8573,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e /* Device-specific setup */ if (iwl3945_hw_set_hw_setting(priv)) { IWL_ERROR("failed to set hw settings\n"); - mutex_unlock(&priv->mutex); goto out_iounmap; } @@ -8567,50 +8597,53 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e iwl3945_disable_interrupts(priv); - pci_enable_msi(pdev); - - err = request_irq(pdev->irq, iwl3945_isr, IRQF_SHARED, DRV_NAME, priv); - if (err) { - IWL_ERROR("Error allocating IRQ %d\n", pdev->irq); - goto out_disable_msi; - } - - mutex_lock(&priv->mutex); - err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group); if (err) { IWL_ERROR("failed to create sysfs device attributes\n"); - mutex_unlock(&priv->mutex); goto out_release_irq; } - /* fetch ucode file from disk, alloc and copy to bus-master buffers ... - * ucode filename and max sizes are card-specific. */ - err = iwl3945_read_ucode(priv); + /* nic init */ + iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + + iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + goto out_remove_sysfs; + } + /* Read the EEPROM */ + err = iwl3945_eeprom_init(priv); if (err) { - IWL_ERROR("Could not read microcode: %d\n", err); - mutex_unlock(&priv->mutex); - goto out_pci_alloc; + IWL_ERROR("Unable to init EEPROM\n"); + goto out_remove_sysfs; } + /* MAC Address location in EEPROM same for 3945/4965 */ + get_eeprom_mac(priv, priv->mac_addr); + IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); + SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - mutex_unlock(&priv->mutex); - - IWL_DEBUG_INFO("Queueing UP work.\n"); + iwl3945_rate_control_register(priv->hw); + err = ieee80211_register_hw(priv->hw); + if (err) { + IWL_ERROR("Failed to register network device (error %d)\n", err); + goto out_remove_sysfs; + } - queue_work(priv->workqueue, &priv->up); + priv->hw->conf.beacon_int = 100; + priv->mac80211_registered = 1; + pci_save_state(pdev); + pci_disable_device(pdev); return 0; - out_pci_alloc: - iwl3945_dealloc_ucode_pci(priv); - + out_remove_sysfs: sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); out_release_irq: - free_irq(pdev->irq, priv); - - out_disable_msi: - pci_disable_msi(pdev); destroy_workqueue(priv->workqueue); priv->workqueue = NULL; iwl3945_unset_hw_setting(priv); @@ -8676,8 +8709,6 @@ static void iwl3945_pci_remove(struct pci_dev *pdev) destroy_workqueue(priv->workqueue); priv->workqueue = NULL; - free_irq(pdev->irq, priv); - pci_disable_msi(pdev); pci_iounmap(pdev, priv->hw_base); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index ad824c607f36..98f09e6e9f8c 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -6608,31 +6608,12 @@ static void iwl4965_alive_start(struct iwl4965_priv *priv) } iwl4965_init_geos(priv); + iwl4965_reset_channel_flag(priv); if (iwl4965_is_rfkill(priv)) return; - if (!priv->mac80211_registered) { - /* Unlock so any user space entry points can call back into - * the driver without a deadlock... */ - mutex_unlock(&priv->mutex); - iwl4965_rate_control_register(priv->hw); - rc = ieee80211_register_hw(priv->hw); - priv->hw->conf.beacon_int = 100; - mutex_lock(&priv->mutex); - - if (rc) { - iwl4965_rate_control_unregister(priv->hw); - IWL_ERROR("Failed to register network " - "device (error %d)\n", rc); - return; - } - - priv->mac80211_registered = 1; - - iwl4965_reset_channel_flag(priv); - } else - ieee80211_start_queues(priv->hw); + ieee80211_start_queues(priv->hw); priv->active_rate = priv->rates_mask; priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; @@ -6663,7 +6644,9 @@ static void iwl4965_alive_start(struct iwl4965_priv *priv) set_bit(STATUS_READY, &priv->status); iwl4965_rf_kill_ct_config(priv); + IWL_DEBUG_INFO("ALIVE processing complete.\n"); + wake_up_interruptible(&priv->wait_command_queue); if (priv->error_recovering) iwl4965_error_recovery(priv); @@ -6777,7 +6760,6 @@ static void iwl4965_down(struct iwl4965_priv *priv) static int __iwl4965_up(struct iwl4965_priv *priv) { - DECLARE_MAC_BUF(mac); int rc, i; u32 hw_rf_kill = 0; @@ -6822,7 +6804,7 @@ static int __iwl4965_up(struct iwl4965_priv *priv) * This will be used to initialize the on-board processor's * data SRAM for a clean start when the runtime program first loads. */ memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, - priv->ucode_data.len); + priv->ucode_data.len); /* If platform's RF_KILL switch is set to KILL, * wait for BIT_INT_RF_KILL interrupt before loading uCode @@ -6853,13 +6835,6 @@ static int __iwl4965_up(struct iwl4965_priv *priv) /* start card; "initialize" will load runtime ucode */ iwl4965_nic_start(priv); - /* MAC Address location in EEPROM is same for 3945/4965 */ - get_eeprom_mac(priv, priv->mac_addr); - IWL_DEBUG_INFO("MAC address: %s\n", - print_mac(mac, priv->mac_addr)); - - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - IWL_DEBUG_INFO(DRV_NAME " is coming up\n"); return 0; @@ -7365,23 +7340,73 @@ static void iwl4965_bg_scan_completed(struct work_struct *work) * *****************************************************************************/ +#define UCODE_READY_TIMEOUT (2 * HZ) + static int iwl4965_mac_start(struct ieee80211_hw *hw) { struct iwl4965_priv *priv = hw->priv; + int ret; IWL_DEBUG_MAC80211("enter\n"); + if (pci_enable_device(priv->pci_dev)) { + IWL_ERROR("Fail to pci_enable_device\n"); + return -ENODEV; + } + pci_restore_state(priv->pci_dev); + pci_enable_msi(priv->pci_dev); + + ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED, + DRV_NAME, priv); + if (ret) { + IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq); + goto out_disable_msi; + } + /* we should be verifying the device is ready to be opened */ mutex_lock(&priv->mutex); - priv->is_open = 1; + memset(&priv->staging_rxon, 0, sizeof(struct iwl4965_rxon_cmd)); + /* fetch ucode file from disk, alloc and copy to bus-master buffers ... + * ucode filename and max sizes are card-specific. */ - if (!iwl4965_is_rfkill(priv)) - ieee80211_start_queues(priv->hw); + if (!priv->ucode_code.len) { + ret = iwl4965_read_ucode(priv); + if (ret) { + IWL_ERROR("Could not read microcode: %d\n", ret); + mutex_unlock(&priv->mutex); + goto out_release_irq; + } + } + IWL_DEBUG_INFO("Start UP work.\n"); + __iwl4965_up(priv); + + priv->is_open = 1; mutex_unlock(&priv->mutex); + + /* Wait for START_ALIVE from ucode. Otherwise callbacks from + * mac80211 will not be run successfully. */ + ret = wait_event_interruptible_timeout(priv->wait_command_queue, + test_bit(STATUS_READY, &priv->status), + UCODE_READY_TIMEOUT); + if (!ret) { + if (!test_bit(STATUS_READY, &priv->status)) { + IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n", + jiffies_to_msecs(UCODE_READY_TIMEOUT)); + ret = -ETIMEDOUT; + goto out_release_irq; + } + } + IWL_DEBUG_MAC80211("leave\n"); return 0; + +out_release_irq: + free_irq(priv->pci_dev->irq, priv); +out_disable_msi: + pci_disable_msi(priv->pci_dev); + return ret; } static void iwl4965_mac_stop(struct ieee80211_hw *hw) @@ -7390,23 +7415,25 @@ static void iwl4965_mac_stop(struct ieee80211_hw *hw) IWL_DEBUG_MAC80211("enter\n"); - - mutex_lock(&priv->mutex); /* stop mac, cancel any scan request and clear * RXON_FILTER_ASSOC_MSK BIT */ priv->is_open = 0; - if (!iwl4965_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - RF not ready\n"); + + if (iwl4965_is_ready_rf(priv)) { + mutex_lock(&priv->mutex); + iwl4965_scan_cancel_timeout(priv, 100); + cancel_delayed_work(&priv->post_associate); mutex_unlock(&priv->mutex); - return; } - iwl4965_scan_cancel_timeout(priv, 100); - cancel_delayed_work(&priv->post_associate); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - mutex_unlock(&priv->mutex); + iwl4965_down(priv); + + flush_workqueue(priv->workqueue); + free_irq(priv->pci_dev->irq, priv); + pci_disable_msi(priv->pci_dev); + pci_save_state(priv->pci_dev); + pci_disable_device(priv->pci_dev); IWL_DEBUG_MAC80211("leave\n"); } @@ -7458,11 +7485,13 @@ static int iwl4965_mac_add_interface(struct ieee80211_hw *hw, IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr)); memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); } - iwl4965_set_mode(priv, conf->type); - IWL_DEBUG_MAC80211("leave\n"); + if (iwl4965_is_ready(priv)) + iwl4965_set_mode(priv, conf->type); + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211("leave\n"); return 0; } @@ -7564,9 +7593,9 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co IWL_DEBUG_MAC80211("leave\n"); - mutex_unlock(&priv->mutex); out: clear_bit(STATUS_CONF_PENDING, &priv->status); + mutex_unlock(&priv->mutex); return ret; } @@ -7651,6 +7680,9 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, return 0; } + if (!iwl4965_is_alive(priv)) + return -EAGAIN; + mutex_lock(&priv->mutex); if (conf->bssid) @@ -8995,6 +9027,7 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e struct iwl4965_priv *priv; struct ieee80211_hw *hw; int i; + DECLARE_MAC_BUF(mac); /* Disabling hardware scan means that mac80211 will perform scans * "the hard way", rather than using device's scan. */ @@ -9136,7 +9169,6 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e /* Device-specific setup */ if (iwl4965_hw_set_hw_setting(priv)) { IWL_ERROR("failed to set hw settings\n"); - mutex_unlock(&priv->mutex); goto out_iounmap; } @@ -9161,50 +9193,53 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e iwl4965_disable_interrupts(priv); - pci_enable_msi(pdev); - - err = request_irq(pdev->irq, iwl4965_isr, IRQF_SHARED, DRV_NAME, priv); - if (err) { - IWL_ERROR("Error allocating IRQ %d\n", pdev->irq); - goto out_disable_msi; - } - - mutex_lock(&priv->mutex); - err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group); if (err) { IWL_ERROR("failed to create sysfs device attributes\n"); - mutex_unlock(&priv->mutex); goto out_release_irq; } - /* fetch ucode file from disk, alloc and copy to bus-master buffers ... - * ucode filename and max sizes are card-specific. */ - err = iwl4965_read_ucode(priv); + /* nic init */ + iwl4965_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + + iwl4965_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + err = iwl4965_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + goto out_remove_sysfs; + } + /* Read the EEPROM */ + err = iwl4965_eeprom_init(priv); if (err) { - IWL_ERROR("Could not read microcode: %d\n", err); - mutex_unlock(&priv->mutex); - goto out_pci_alloc; + IWL_ERROR("Unable to init EEPROM\n"); + goto out_remove_sysfs; } + /* MAC Address location in EEPROM same for 3945/4965 */ + get_eeprom_mac(priv, priv->mac_addr); + IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); + SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - mutex_unlock(&priv->mutex); - - IWL_DEBUG_INFO("Queueing UP work.\n"); + iwl4965_rate_control_register(priv->hw); + err = ieee80211_register_hw(priv->hw); + if (err) { + IWL_ERROR("Failed to register network device (error %d)\n", err); + goto out_remove_sysfs; + } - queue_work(priv->workqueue, &priv->up); + priv->hw->conf.beacon_int = 100; + priv->mac80211_registered = 1; + pci_save_state(pdev); + pci_disable_device(pdev); return 0; - out_pci_alloc: - iwl4965_dealloc_ucode_pci(priv); - + out_remove_sysfs: sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); out_release_irq: - free_irq(pdev->irq, priv); - - out_disable_msi: - pci_disable_msi(pdev); destroy_workqueue(priv->workqueue); priv->workqueue = NULL; iwl4965_unset_hw_setting(priv); @@ -9270,8 +9305,6 @@ static void iwl4965_pci_remove(struct pci_dev *pdev) destroy_workqueue(priv->workqueue); priv->workqueue = NULL; - free_irq(pdev->irq, priv); - pci_disable_msi(pdev); pci_iounmap(pdev, priv->hw_base); pci_release_regions(pdev); pci_disable_device(pdev); |