diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/smc91x.c | 53 | ||||
| -rw-r--r-- | drivers/net/smc91x.h | 474 |
2 files changed, 307 insertions, 220 deletions
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 75e9b3b910cc..0e9833adf9fe 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -215,15 +215,12 @@ struct smc_local { spinlock_t lock; -#ifdef SMC_CAN_USE_DATACS - u32 __iomem *datacs; -#endif - #ifdef SMC_USE_PXA_DMA /* DMA needs the physical address of the chip */ u_long physaddr; #endif void __iomem *base; + void __iomem *datacs; }; #if SMC_DEBUG > 0 @@ -2104,9 +2101,8 @@ static int smc_enable_device(struct platform_device *pdev) * Set the appropriate byte/word mode. */ ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8; -#ifndef SMC_CAN_USE_16BIT - ecsr |= ECSR_IOIS8; -#endif + if (!SMC_CAN_USE_16BIT) + ecsr |= ECSR_IOIS8; writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT)); local_irq_restore(flags); @@ -2143,40 +2139,39 @@ static void smc_release_attrib(struct platform_device *pdev) release_mem_region(res->start, ATTRIB_SIZE); } -#ifdef SMC_CAN_USE_DATACS -static void smc_request_datacs(struct platform_device *pdev, struct net_device *ndev) +static inline void smc_request_datacs(struct platform_device *pdev, struct net_device *ndev) { - struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32"); - struct smc_local *lp = netdev_priv(ndev); + if (SMC_CAN_USE_DATACS) { + struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32"); + struct smc_local *lp = netdev_priv(ndev); - if (!res) - return; + if (!res) + return; - if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) { - printk(KERN_INFO "%s: failed to request datacs memory region.\n", CARDNAME); - return; - } + if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) { + printk(KERN_INFO "%s: failed to request datacs memory region.\n", CARDNAME); + return; + } - lp->datacs = ioremap(res->start, SMC_DATA_EXTENT); + lp->datacs = ioremap(res->start, SMC_DATA_EXTENT); + } } static void smc_release_datacs(struct platform_device *pdev, struct net_device *ndev) { - struct smc_local *lp = netdev_priv(ndev); - struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32"); + if (SMC_CAN_USE_DATACS) { + struct smc_local *lp = netdev_priv(ndev); + struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32"); - if (lp->datacs) - iounmap(lp->datacs); + if (lp->datacs) + iounmap(lp->datacs); - lp->datacs = NULL; + lp->datacs = NULL; - if (res) - release_mem_region(res->start, SMC_DATA_EXTENT); + if (res) + release_mem_region(res->start, SMC_DATA_EXTENT); + } } -#else -static void smc_request_datacs(struct platform_device *pdev, struct net_device *ndev) {} -static void smc_release_datacs(struct platform_device *pdev, struct net_device *ndev) {} -#endif /* * smc_init(void) diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index e0efd1964e72..e1be1af51201 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -275,7 +275,10 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_insw(a,r,p,l) readsw ((void*) ((a) + (r)), p, l) #define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7A40X_IOBARRIER; }) -static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) +#define SMC_outsw LPD7A40X_SMC_outsw + +static inline void LPD7A40X_SMC_outsw(unsigned long a, int r, + unsigned char* p, int l) { unsigned short* ps = (unsigned short*) p; while (l-- > 0) { @@ -342,10 +345,6 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) #endif -#ifndef SMC_IRQ_FLAGS -#define SMC_IRQ_FLAGS SA_TRIGGER_RISING -#endif - #ifdef SMC_USE_PXA_DMA /* * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is @@ -441,10 +440,85 @@ smc_pxa_dma_irq(int dma, void *dummy, struct pt_regs *regs) #endif /* SMC_USE_PXA_DMA */ -/* Because of bank switching, the LAN91x uses only 16 I/O ports */ +/* + * Everything a particular hardware setup needs should have been defined + * at this point. Add stubs for the undefined cases, mainly to avoid + * compilation warnings since they'll be optimized away, or to prevent buggy + * use of them. + */ + +#if ! SMC_CAN_USE_32BIT +#define SMC_inl(ioaddr, reg) ({ BUG(); 0; }) +#define SMC_outl(x, ioaddr, reg) BUG() +#define SMC_insl(a, r, p, l) BUG() +#define SMC_outsl(a, r, p, l) BUG() +#endif + +#if !defined(SMC_insl) || !defined(SMC_outsl) +#define SMC_insl(a, r, p, l) BUG() +#define SMC_outsl(a, r, p, l) BUG() +#endif + +#if ! SMC_CAN_USE_16BIT + +/* + * Any 16-bit access is performed with two 8-bit accesses if the hardware + * can't do it directly. Most registers are 16-bit so those are mandatory. + */ +#define SMC_outw(x, ioaddr, reg) \ + do { \ + unsigned int __val16 = (x); \ + SMC_outb( __val16, ioaddr, reg ); \ + SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ + } while (0) +#define SMC_inw(ioaddr, reg) \ + ({ \ + unsigned int __val16; \ + __val16 = SMC_inb( ioaddr, reg ); \ + __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ + __val16; \ + }) + +#define SMC_insw(a, r, p, l) BUG() +#define SMC_outsw(a, r, p, l) BUG() + +#endif + +#if !defined(SMC_insw) || !defined(SMC_outsw) +#define SMC_insw(a, r, p, l) BUG() +#define SMC_outsw(a, r, p, l) BUG() +#endif + +#if ! SMC_CAN_USE_8BIT +#define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) +#define SMC_outb(x, ioaddr, reg) BUG() +#define SMC_insb(a, r, p, l) BUG() +#define SMC_outsb(a, r, p, l) BUG() +#endif + +#if !defined(SMC_insb) || !defined(SMC_outsb) +#define SMC_insb(a, r, p, l) BUG() +#define SMC_outsb(a, r, p, l) BUG() +#endif + +#ifndef SMC_CAN_USE_DATACS +#define SMC_CAN_USE_DATACS 0 +#endif + #ifndef SMC_IO_SHIFT #define SMC_IO_SHIFT 0 #endif + +#ifndef SMC_IRQ_FLAGS +#define SMC_IRQ_FLAGS SA_TRIGGER_RISING +#endif + +#ifndef SMC_INTERRUPT_PREAMBLE +#define SMC_INTERRUPT_PREAMBLE +#endif + + +/* Because of bank switching, the LAN91x uses only 16 I/O ports */ #define SMC_IO_EXTENT (16 << SMC_IO_SHIFT) #define SMC_DATA_EXTENT (4) @@ -817,6 +891,11 @@ static const char * chip_ids[ 16 ] = { * Note: the following macros do *not* select the bank -- this must * be done separately as needed in the main code. The SMC_REG() macro * only uses the bank argument for debugging purposes (when enabled). + * + * Note: despite inline functions being safer, everything leading to this + * should preferably be macros to let BUG() display the line number in + * the core source code since we're interested in the top call site + * not in any inline function location. */ #if SMC_DEBUG > 0 @@ -834,62 +913,142 @@ static const char * chip_ids[ 16 ] = { #define SMC_REG(reg, bank) (reg<<SMC_IO_SHIFT) #endif -#if SMC_CAN_USE_8BIT -#define SMC_GET_PN() SMC_inb( ioaddr, PN_REG ) -#define SMC_SET_PN(x) SMC_outb( x, ioaddr, PN_REG ) -#define SMC_GET_AR() SMC_inb( ioaddr, AR_REG ) -#define SMC_GET_TXFIFO() SMC_inb( ioaddr, TXFIFO_REG ) -#define SMC_GET_RXFIFO() SMC_inb( ioaddr, RXFIFO_REG ) -#define SMC_GET_INT() SMC_inb( ioaddr, INT_REG ) -#define SMC_ACK_INT(x) SMC_outb( x, ioaddr, INT_REG ) -#define SMC_GET_INT_MASK() SMC_inb( ioaddr, IM_REG ) -#define SMC_SET_INT_MASK(x) SMC_outb( x, ioaddr, IM_REG ) -#else -#define SMC_GET_PN() (SMC_inw( ioaddr, PN_REG ) & 0xFF) -#define SMC_SET_PN(x) SMC_outw( x, ioaddr, PN_REG ) -#define SMC_GET_AR() (SMC_inw( ioaddr, PN_REG ) >> 8) -#define SMC_GET_TXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) & 0xFF) -#define SMC_GET_RXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) >> 8) -#define SMC_GET_INT() (SMC_inw( ioaddr, INT_REG ) & 0xFF) +/* + * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not + * aligned to a 32 bit boundary. I tell you that does exist! + * Fortunately the affected register accesses can be easily worked around + * since we can write zeroes to the preceeding 16 bits without adverse + * effects and use a 32-bit access. + * + * Enforce it on any 32-bit capable setup for now. + */ +#define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT + +#define SMC_GET_PN() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG)) \ + : (SMC_inw(ioaddr, PN_REG) & 0xFF) ) + +#define SMC_SET_PN(x) \ + do { \ + if (SMC_MUST_ALIGN_WRITE) \ + SMC_outl((x)<<16, ioaddr, SMC_REG(0, 2)); \ + else if (SMC_CAN_USE_8BIT) \ + SMC_outb(x, ioaddr, PN_REG); \ + else \ + SMC_outw(x, ioaddr, PN_REG); \ + } while (0) + +#define SMC_GET_AR() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG)) \ + : (SMC_inw(ioaddr, PN_REG) >> 8) ) + +#define SMC_GET_TXFIFO() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG)) \ + : (SMC_inw(ioaddr, TXFIFO_REG) & 0xFF) ) + +#define SMC_GET_RXFIFO() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG)) \ + : (SMC_inw(ioaddr, TXFIFO_REG) >> 8) ) + +#define SMC_GET_INT() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG)) \ + : (SMC_inw(ioaddr, INT_REG) & 0xFF) ) + #define SMC_ACK_INT(x) \ do { \ - unsigned long __flags; \ - int __mask; \ - local_irq_save(__flags); \ - __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \ - SMC_outw( __mask | (x), ioaddr, INT_REG ); \ - local_irq_restore(__flags); \ + if (SMC_CAN_USE_8BIT) \ + SMC_outb(x, ioaddr, INT_REG); \ + else { \ + unsigned long __flags; \ + int __mask; \ + local_irq_save(__flags); \ + __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \ + SMC_outw( __mask | (x), ioaddr, INT_REG ); \ + local_irq_restore(__flags); \ + } \ + } while (0) + +#define SMC_GET_INT_MASK() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG)) \ + : (SMC_inw( ioaddr, INT_REG ) >> 8) ) + +#define SMC_SET_INT_MASK(x) \ + do { \ + if (SMC_CAN_USE_8BIT) \ + SMC_outb(x, ioaddr, IM_REG); \ + else \ + SMC_outw((x) << 8, ioaddr, INT_REG); \ + } while (0) + +#define SMC_CURRENT_BANK() SMC_inw(ioaddr, BANK_SELECT) + +#define SMC_SELECT_BANK(x) \ + do { \ + if (SMC_MUST_ALIGN_WRITE) \ + SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \ + else \ + SMC_outw(x, ioaddr, BANK_SELECT); \ + } while (0) + +#define SMC_GET_BASE() SMC_inw(ioaddr, BASE_REG) + +#define SMC_SET_BASE(x) SMC_outw(x, ioaddr, BASE_REG) + +#define SMC_GET_CONFIG() SMC_inw(ioaddr, CONFIG_REG) + +#define SMC_SET_CONFIG(x) SMC_outw(x, ioaddr, CONFIG_REG) + +#define SMC_GET_COUNTER() SMC_inw(ioaddr, COUNTER_REG) + +#define SMC_GET_CTL() SMC_inw(ioaddr, CTL_REG) + +#define SMC_SET_CTL(x) SMC_outw(x, ioaddr, CTL_REG) + +#define SMC_GET_MII() SMC_inw(ioaddr, MII_REG) + +#define SMC_SET_MII(x) SMC_outw(x, ioaddr, MII_REG) + +#define SMC_GET_MIR() SMC_inw(ioaddr, MIR_REG) + +#define SMC_SET_MIR(x) SMC_outw(x, ioaddr, MIR_REG) + +#define SMC_GET_MMU_CMD() SMC_inw(ioaddr, MMU_CMD_REG) + +#define SMC_SET_MMU_CMD(x) SMC_outw(x, ioaddr, MMU_CMD_REG) + +#define SMC_GET_FIFO() SMC_inw(ioaddr, FIFO_REG) + +#define SMC_GET_PTR() SMC_inw(ioaddr, PTR_REG) + +#define SMC_SET_PTR(x) \ + do { \ + if (SMC_MUST_ALIGN_WRITE) \ + SMC_outl((x)<<16, ioaddr, SMC_REG(4, 2)); \ + else \ + SMC_outw(x, ioaddr, PTR_REG); \ } while (0) -#define SMC_GET_INT_MASK() (SMC_inw( ioaddr, INT_REG ) >> 8) -#define SMC_SET_INT_MASK(x) SMC_outw( (x) << 8, ioaddr, INT_REG ) -#endif -#define SMC_CURRENT_BANK() SMC_inw( ioaddr, BANK_SELECT ) -#define SMC_SELECT_BANK(x) SMC_outw( x, ioaddr, BANK_SELECT ) -#define SMC_GET_BASE() SMC_inw( ioaddr, BASE_REG ) -#define SMC_SET_BASE(x) SMC_outw( x, ioaddr, BASE_REG ) -#define SMC_GET_CONFIG() SMC_inw( ioaddr, CONFIG_REG ) -#define SMC_SET_CONFIG(x) SMC_outw( x, ioaddr, CONFIG_REG ) -#define SMC_GET_COUNTER() SMC_inw( ioaddr, COUNTER_REG ) -#define SMC_GET_CTL() SMC_inw( ioaddr, CTL_REG ) -#define SMC_SET_CTL(x) SMC_outw( x, ioaddr, CTL_REG ) -#define SMC_GET_MII() SMC_inw( ioaddr, MII_REG ) -#define SMC_SET_MII(x) SMC_outw( x, ioaddr, MII_REG ) -#define SMC_GET_MIR() SMC_inw( ioaddr, MIR_REG ) -#define SMC_SET_MIR(x) SMC_outw( x, ioaddr, MIR_REG ) -#define SMC_GET_MMU_CMD() SMC_inw( ioaddr, MMU_CMD_REG ) -#define SMC_SET_MMU_CMD(x) SMC_outw( x, ioaddr, MMU_CMD_REG ) -#define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG ) -#define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG ) -#define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG ) -#define SMC_GET_EPH_STATUS() SMC_inw( ioaddr, EPH_STATUS_REG ) -#define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG ) -#define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG ) -#define SMC_GET_REV() SMC_inw( ioaddr, REV_REG ) -#define SMC_GET_RPC() SMC_inw( ioaddr, RPC_REG ) -#define SMC_SET_RPC(x) SMC_outw( x, ioaddr, RPC_REG ) -#define SMC_GET_TCR() SMC_inw( ioaddr, TCR_REG ) -#define SMC_SET_TCR(x) SMC_outw( x, ioaddr, TCR_REG ) +#define SMC_GET_EPH_STATUS() SMC_inw(ioaddr, EPH_STATUS_REG) + +#define SMC_GET_RCR() SMC_inw(ioaddr, RCR_REG) + +#define SMC_SET_RCR(x) SMC_outw(x, ioaddr, RCR_REG) + +#define SMC_GET_REV() SMC_inw(ioaddr, REV_REG) + +#define SMC_GET_RPC() SMC_inw(ioaddr, RPC_REG) + +#define SMC_SET_RPC(x) \ + do { \ + if (SMC_MUST_ALIGN_WRITE) \ + SMC_outl((x)<<16, ioaddr, SMC_REG(8, 0)); \ + else \ + SMC_outw(x, ioaddr, RPC_REG); \ + } while (0) + +#define SMC_GET_TCR() SMC_inw(ioaddr, TCR_REG) + +#define SMC_SET_TCR(x) SMC_outw(x, ioaddr, TCR_REG) #ifndef SMC_GET_MAC_ADDR #define SMC_GET_MAC_ADDR(addr) \ @@ -920,151 +1079,84 @@ static const char * chip_ids[ 16 ] = { SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \ } while (0) -#if SMC_CAN_USE_32BIT -/* - * Some setups just can't write 8 or 16 bits reliably when not aligned - * to a 32 bit boundary. I tell you that exists! - * We re-do the ones here that can be easily worked around if they can have - * their low parts written to 0 without adverse effects. - */ -#undef SMC_SELECT_BANK -#define SMC_SELECT_BANK(x) SMC_outl( (x)<<16, ioaddr, 12<<SMC_IO_SHIFT ) -#undef SMC_SET_RPC -#define SMC_SET_RPC(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(8, 0) ) -#undef SMC_SET_PN -#define SMC_SET_PN(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(0, 2) ) -#undef SMC_SET_PTR -#define SMC_SET_PTR(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(4, 2) ) -#endif - -#if SMC_CAN_USE_32BIT -#define SMC_PUT_PKT_HDR(status, length) \ - SMC_outl( (status) | (length) << 16, ioaddr, DATA_REG ) -#define SMC_GET_PKT_HDR(status, length) \ - do { \ - unsigned int __val = SMC_inl( ioaddr, DATA_REG ); \ - (status) = __val & 0xffff; \ - (length) = __val >> 16; \ - } while (0) -#else #define SMC_PUT_PKT_HDR(status, length) \ do { \ - SMC_outw( status, ioaddr, DATA_REG ); \ - SMC_outw( length, ioaddr, DATA_REG ); \ - } while (0) -#define SMC_GET_PKT_HDR(status, length) \ - do { \ - (status) = SMC_inw( ioaddr, DATA_REG ); \ - (length) = SMC_inw( ioaddr, DATA_REG ); \ + if (SMC_CAN_USE_32BIT) \ + SMC_outl((status) | (length)<<16, ioaddr, DATA_REG); \ + else { \ + SMC_outw(status, ioaddr, DATA_REG); \ + SMC_outw(length, ioaddr, DATA_REG); \ + } \ } while (0) -#endif -#if SMC_CAN_USE_32BIT -#define _SMC_PUSH_DATA(p, l) \ +#define SMC_GET_PKT_HDR(status, length) \ do { \ - char *__ptr = (p); \ - int __len = (l); \ - if (__len >= 2 && (unsigned long)__ptr & 2) { \ - __len -= 2; \ - SMC_outw( *(u16 *)__ptr, ioaddr, DATA_REG ); \ - __ptr += 2; \ - } \ - SMC_outsl( ioaddr, DATA_REG, __ptr, __len >> 2); \ - if (__len & 2) { \ - __ptr += (__len & ~3); \ - SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \ + if (SMC_CAN_USE_32BIT) { \ + unsigned int __val = SMC_inl(ioaddr, DATA_REG); \ + (status) = __val & 0xffff; \ + (length) = __val >> 16; \ + } else { \ + (status) = SMC_inw(ioaddr, DATA_REG); \ + (length) = SMC_inw(ioaddr, DATA_REG); \ } \ } while (0) -#define _SMC_PULL_DATA(p, l) \ - do { \ - char *__ptr = (p); \ - int __len = (l); \ - if ((unsigned long)__ptr & 2) { \ - /* \ - * We want 32bit alignment here. \ - * Since some buses perform a full 32bit \ - * fetch even for 16bit data we can't use \ - * SMC_inw() here. Back both source (on chip \ - * and destination) pointers of 2 bytes. \ - */ \ - __ptr -= 2; \ - __len += 2; \ - SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \ - } \ - __len += 2; \ - SMC_insl( ioaddr, DATA_REG, __ptr, __len >> 2); \ - } while (0) -#elif SMC_CAN_USE_16BIT -#define _SMC_PUSH_DATA(p, l) SMC_outsw( ioaddr, DATA_REG, p, (l) >> 1 ) -#define _SMC_PULL_DATA(p, l) SMC_insw ( ioaddr, DATA_REG, p, (l) >> 1 ) -#elif SMC_CAN_USE_8BIT -#define _SMC_PUSH_DATA(p, l) SMC_outsb( ioaddr, DATA_REG, p, l ) -#define _SMC_PULL_DATA(p, l) SMC_insb ( ioaddr, DATA_REG, p, l ) -#endif -#if ! SMC_CAN_USE_16BIT -#define SMC_outw(x, ioaddr, reg) \ +#define SMC_PUSH_DATA(p, l) \ do { \ - unsigned int __val16 = (x); \ - SMC_outb( __val16, ioaddr, reg ); \ - SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ + if (SMC_CAN_USE_32BIT) { \ + void *__ptr = (p); \ + int __len = (l); \ + void *__ioaddr = ioaddr; \ + if (__len >= 2 && (unsigned long)__ptr & 2) { \ + __len -= 2; \ + SMC_outw(*(u16 *)__ptr, ioaddr, DATA_REG); \ + __ptr += 2; \ + } \ + if (SMC_CAN_USE_DATACS && lp->datacs) \ + __ioaddr = lp->datacs; \ + SMC_outsl(__ioaddr, DATA_REG, __ptr, __len>>2); \ + if (__len & 2) { \ + __ptr += (__len & ~3); \ + SMC_outw(*((u16 *)__ptr), ioaddr, DATA_REG); \ + } \ + } else if (SMC_CAN_USE_16BIT) \ + SMC_outsw(ioaddr, DATA_REG, p, (l) >> 1); \ + else if (SMC_CAN_USE_8BIT) \ + SMC_outsb(ioaddr, DATA_REG, p, l); \ } while (0) -#define SMC_inw(ioaddr, reg) \ - ({ \ - unsigned int __val16; \ - __val16 = SMC_inb( ioaddr, reg ); \ - __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ - __val16; \ - }) -#endif - -#ifdef SMC_CAN_USE_DATACS -#define SMC_PUSH_DATA(p, l) \ - if ( lp->datacs ) { \ - unsigned char *__ptr = (p); \ - int __len = (l); \ - if (__len >= 2 && (unsigned long)__ptr & 2) { \ - __len -= 2; \ - SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \ - __ptr += 2; \ - } \ - outsl(lp->datacs, __ptr, __len >> 2); \ - if (__len & 2) { \ - __ptr += (__len & ~3); \ - SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \ - } \ - } else { \ - _SMC_PUSH_DATA(p, l); \ - } #define SMC_PULL_DATA(p, l) \ - if ( lp->datacs ) { \ - unsigned char *__ptr = (p); \ - int __len = (l); \ - if ((unsigned long)__ptr & 2) { \ - /* \ - * We want 32bit alignment here. \ - * Since some buses perform a full 32bit \ - * fetch even for 16bit data we can't use \ - * SMC_inw() here. Back both source (on chip \ - * and destination) pointers of 2 bytes. \ - */ \ - __ptr -= 2; \ + do { \ + if (SMC_CAN_USE_32BIT) { \ + void *__ptr = (p); \ + int __len = (l); \ + void *__ioaddr = ioaddr; \ + if ((unsigned long)__ptr & 2) { \ + /* \ + * We want 32bit alignment here. \ + * Since some buses perform a full \ + * 32bit fetch even for 16bit data \ + * we can't use SMC_inw() here. \ + * Back both source (on-chip) and \ + * destination pointers of 2 bytes. \ + * This is possible since the call to \ + * SMC_GET_PKT_HDR() already advanced \ + * the source pointer of 4 bytes, and \ + * the skb_reserve(skb, 2) advanced \ + * the destination pointer of 2 bytes. \ + */ \ + __ptr -= 2; \ + __len += 2; \ + SMC_SET_PTR(2|PTR_READ|PTR_RCV|PTR_AUTOINC); \ + } \ + if (SMC_CAN_USE_DATACS && lp->datacs) \ + __ioaddr = lp->datacs; \ __len += 2; \ - SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \ - } \ - __len += 2; \ - insl( lp->datacs, __ptr, __len >> 2); \ - } else { \ - _SMC_PULL_DATA(p, l); \ - } -#else -#define SMC_PUSH_DATA(p, l) _SMC_PUSH_DATA(p, l) -#define SMC_PULL_DATA(p, l) _SMC_PULL_DATA(p, l) -#endif - -#if !defined (SMC_INTERRUPT_PREAMBLE) -# define SMC_INTERRUPT_PREAMBLE -#endif + SMC_insl(__ioaddr, DATA_REG, __ptr, __len>>2); \ + } else if (SMC_CAN_USE_16BIT) \ + SMC_insw(ioaddr, DATA_REG, p, (l) >> 1); \ + else if (SMC_CAN_USE_8BIT) \ + SMC_insb(ioaddr, DATA_REG, p, l); \ + } while (0) #endif /* _SMC91X_H_ */ |