diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/Makefile | 5 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-commands.h | 24 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.h | 10 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-dev.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-scan.c | 896 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl4965-base.c | 881 |
6 files changed, 946 insertions, 872 deletions
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 184fdeec3606..1f52b92f08b5 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_IWLCORE) += iwlcore.o -iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o iwl-calib.o -iwlcore-objs += iwl-rx.o iwl-tx.o iwl-sta.o +iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o +iwlcore-objs += iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o +iwlcore-objs += iwl-scan.o iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index b58f79626e10..058e76415042 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -2100,7 +2100,7 @@ struct iwl4965_ct_kill_config { *****************************************************************************/ /** - * struct iwl4965_scan_channel - entry in REPLY_SCAN_CMD channel table + * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table * * One for each channel in the scan list. * Each channel can independently select: @@ -2110,7 +2110,7 @@ struct iwl4965_ct_kill_config { * quiet_plcp_th, good_CRC_th) * * To avoid uCode errors, make sure the following are true (see comments - * under struct iwl4965_scan_cmd about max_out_time and quiet_time): + * under struct iwl_scan_cmd about max_out_time and quiet_time): * 1) If using passive_dwell (i.e. passive_dwell != 0): * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) * 2) quiet_time <= active_dwell @@ -2118,7 +2118,7 @@ struct iwl4965_ct_kill_config { * passive_dwell < max_out_time * active_dwell < max_out_time */ -struct iwl4965_scan_channel { +struct iwl_scan_channel { /* * type is defined as: * 0:0 1 = active, 0 = passive @@ -2134,13 +2134,13 @@ struct iwl4965_scan_channel { } __attribute__ ((packed)); /** - * struct iwl4965_ssid_ie - directed scan network information element + * struct iwl_ssid_ie - directed scan network information element * * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field * in struct iwl4965_scan_channel; each channel may select different ssids from * among the 4 entries. SSID IEs get transmitted in reverse order of entry. */ -struct iwl4965_ssid_ie { +struct iwl_ssid_ie { u8 id; u8 len; u8 ssid[32]; @@ -2201,9 +2201,9 @@ struct iwl4965_ssid_ie { * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. * * To avoid uCode errors, see timing restrictions described under - * struct iwl4965_scan_channel. + * struct iwl_scan_channel. */ -struct iwl4965_scan_cmd { +struct iwl_scan_cmd { __le16 len; u8 reserved0; u8 channel_count; /* # channels in channel list */ @@ -2227,7 +2227,7 @@ struct iwl4965_scan_cmd { struct iwl_tx_cmd tx_cmd; /* For directed active scans (set to all-0s otherwise) */ - struct iwl4965_ssid_ie direct_scan[PROBE_OPTION_MAX]; + struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; /* * Probe request frame, followed by channel list. @@ -2255,14 +2255,14 @@ struct iwl4965_scan_cmd { /* * REPLY_SCAN_CMD = 0x80 (response) */ -struct iwl4965_scanreq_notification { +struct iwl_scanreq_notification { __le32 status; /* 1: okay, 2: cannot fulfill request */ } __attribute__ ((packed)); /* * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command) */ -struct iwl4965_scanstart_notification { +struct iwl_scanstart_notification { __le32 tsf_low; __le32 tsf_high; __le32 beacon_timer; @@ -2279,7 +2279,7 @@ struct iwl4965_scanstart_notification { /* * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command) */ -struct iwl4965_scanresults_notification { +struct iwl_scanresults_notification { u8 channel; u8 band; u8 reserved[2]; @@ -2291,7 +2291,7 @@ struct iwl4965_scanresults_notification { /* * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command) */ -struct iwl4965_scancomplete_notification { +struct iwl_scancomplete_notification { u8 scanned_channels; u8 status; u8 reserved; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 5bae691cc492..5837577caa8b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -243,6 +243,16 @@ int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id); ****************************************************/ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force); +/******************************************************************************* + * Scanning + ******************************************************************************/ +int iwl_scan_cancel(struct iwl_priv *priv); +int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); +const char *iwl_escape_essid(const char *essid, u8 essid_len); +int iwl_scan_initiate(struct iwl_priv *priv); +void iwl_setup_rx_scan_handlers(struct iwl_priv *priv); +void iwl_setup_scan_deferred_work(struct iwl_priv *priv); + /***************************************************** * S e n d i n g H o s t C o m m a n d s * *****************************************************/ diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index b420f64dcb7d..e5869874213c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -976,7 +976,7 @@ struct iwl_priv { int one_direct_scan; u8 direct_ssid_len; u8 direct_ssid[IW_ESSID_MAX_SIZE]; - struct iwl4965_scan_cmd *scan; + struct iwl_scan_cmd *scan; /* spinlock */ spinlock_t lock; /* protect general shared data */ diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c new file mode 100644 index 000000000000..c2ed7c17ea1f --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -0,0 +1,896 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Tomas Winkler <tomas.winkler@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ +#include <net/mac80211.h> +#include <linux/etherdevice.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-sta.h" +#include "iwl-io.h" +#include "iwl-helpers.h" + +/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after + * sending probe req. This should be set long enough to hear probe responses + * from more than one AP. */ +#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */ +#define IWL_ACTIVE_DWELL_TIME_52 (10) + +/* For faster active scanning, scan will move to the next channel if fewer than + * PLCP_QUIET_THRESH packets are heard on this channel within + * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell + * time if it's a quiet channel (nothing responded to our probe, and there's + * no other traffic). + * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ +#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */ +#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */ + +/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. + * Must be set longer than active dwell time. + * For the most reliable scan, set > AP beacon interval (typically 100msec). */ +#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ +#define IWL_PASSIVE_DWELL_TIME_52 (10) +#define IWL_PASSIVE_DWELL_BASE (100) +#define IWL_CHANNEL_TUNE_TIME 5 + + + +static int iwl_is_empty_essid(const char *essid, int essid_len) +{ + /* Single white space is for Linksys APs */ + if (essid_len == 1 && essid[0] == ' ') + return 1; + + /* Otherwise, if the entire essid is 0, we assume it is hidden */ + while (essid_len) { + essid_len--; + if (essid[essid_len] != '\0') + return 0; + } + + return 1; +} + + + +const char *iwl_escape_essid(const char *essid, u8 essid_len) +{ + static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; + const char *s = essid; + char *d = escaped; + + if (iwl_is_empty_essid(essid, essid_len)) { + memcpy(escaped, "<hidden>", sizeof("<hidden>")); + return escaped; + } + + essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE); + while (essid_len--) { + if (*s == '\0') { + *d++ = '\\'; + *d++ = '0'; + s++; + } else + *d++ = *s++; + } + *d = '\0'; + return escaped; +} +EXPORT_SYMBOL(iwl_escape_essid); + +/** + * iwl_scan_cancel - Cancel any currently executing HW scan + * + * NOTE: priv->mutex is not required before calling this function + */ +int iwl_scan_cancel(struct iwl_priv *priv) +{ + if (!test_bit(STATUS_SCAN_HW, &priv->status)) { + clear_bit(STATUS_SCANNING, &priv->status); + return 0; + } + + if (test_bit(STATUS_SCANNING, &priv->status)) { + if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_SCAN("Queuing scan abort.\n"); + set_bit(STATUS_SCAN_ABORTING, &priv->status); + queue_work(priv->workqueue, &priv->abort_scan); + + } else + IWL_DEBUG_SCAN("Scan abort already in progress.\n"); + + return test_bit(STATUS_SCANNING, &priv->status); + } + + return 0; +} +EXPORT_SYMBOL(iwl_scan_cancel); +/** + * iwl_scan_cancel_timeout - Cancel any currently executing HW scan + * @ms: amount of time to wait (in milliseconds) for scan to abort + * + * NOTE: priv->mutex must be held before calling this function + */ +int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) +{ + unsigned long now = jiffies; + int ret; + + ret = iwl_scan_cancel(priv); + if (ret && ms) { + mutex_unlock(&priv->mutex); + while (!time_after(jiffies, now + msecs_to_jiffies(ms)) && + test_bit(STATUS_SCANNING, &priv->status)) + msleep(1); + mutex_lock(&priv->mutex); + + return test_bit(STATUS_SCANNING, &priv->status); + } + + return ret; +} +EXPORT_SYMBOL(iwl_scan_cancel_timeout); + +static int iwl_send_scan_abort(struct iwl_priv *priv) +{ + int ret = 0; + struct iwl_rx_packet *res; + struct iwl_host_cmd cmd = { + .id = REPLY_SCAN_ABORT_CMD, + .meta.flags = CMD_WANT_SKB, + }; + + /* If there isn't a scan actively going on in the hardware + * then we are in between scan bands and not actually + * actively scanning, so don't send the abort command */ + if (!test_bit(STATUS_SCAN_HW, &priv->status)) { + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + return 0; + } + + ret = iwl_send_cmd_sync(priv, &cmd); + if (ret) { + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + return ret; + } + + res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; + if (res->u.status != CAN_ABORT_STATUS) { + /* The scan abort will return 1 for success or + * 2 for "failure". A failure condition can be + * due to simply not being in an active scan which + * can occur if we send the scan abort before we + * the microcode has notified us that a scan is + * completed. */ + IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status); + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + clear_bit(STATUS_SCAN_HW, &priv->status); + } + + dev_kfree_skb_any(cmd.meta.u.skb); + + return ret; +} + + +/* Service response to REPLY_SCAN_CMD (0x80) */ +static void iwl_rx_reply_scan(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_scanreq_notification *notif = + (struct iwl_scanreq_notification *)pkt->u.raw; + + IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status); +#endif +} + +/* Service SCAN_START_NOTIFICATION (0x82) */ +static void iwl_rx_scan_start_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_scanstart_notification *notif = + (struct iwl_scanstart_notification *)pkt->u.raw; + priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); + IWL_DEBUG_SCAN("Scan start: " + "%d [802.11%s] " + "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", + notif->channel, + notif->band ? "bg" : "a", + notif->tsf_high, + notif->tsf_low, notif->status, notif->beacon_timer); +} + +/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ +static void iwl_rx_scan_results_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_scanresults_notification *notif = + (struct iwl_scanresults_notification *)pkt->u.raw; + + IWL_DEBUG_SCAN("Scan ch.res: " + "%d [802.11%s] " + "(TSF: 0x%08X:%08X) - %d " + "elapsed=%lu usec (%dms since last)\n", + notif->channel, + notif->band ? "bg" : "a", + le32_to_cpu(notif->tsf_high), + le32_to_cpu(notif->tsf_low), + le32_to_cpu(notif->statistics[0]), + le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf, + jiffies_to_msecs(elapsed_jiffies + (priv->last_scan_jiffies, jiffies))); +#endif + + priv->last_scan_jiffies = jiffies; + priv->next_scan_jiffies = 0; +} + +/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ +static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw; + + IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", + scan_notif->scanned_channels, + scan_notif->tsf_low, + scan_notif->tsf_high, scan_notif->status); + + /* The HW is no longer scanning */ + clear_bit(STATUS_SCAN_HW, &priv->status); + + /* The scan completion notification came in, so kill that timer... */ + cancel_delayed_work(&priv->scan_check); + + IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", + (priv->scan_bands == 2) ? "2.4" : "5.2", + jiffies_to_msecs(elapsed_jiffies + (priv->scan_pass_start, jiffies))); + + /* Remove this scanned band from the list + * of pending bands to scan */ + priv->scan_bands--; + + /* If a request to abort was given, or the scan did not succeed + * then we reset the scan state machine and terminate, + * re-queuing another scan if one has been requested */ + if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_INFO("Aborted scan completed.\n"); + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + } else { + /* If there are more bands on this scan pass reschedule */ + if (priv->scan_bands > 0) + goto reschedule; + } + + priv->last_scan_jiffies = jiffies; + priv->next_scan_jiffies = 0; + IWL_DEBUG_INFO("Setting scan to off\n"); + + clear_bit(STATUS_SCANNING, &priv->status); + + IWL_DEBUG_INFO("Scan took %dms\n", + jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies))); + + queue_work(priv->workqueue, &priv->scan_completed); + + return; + +reschedule: + priv->scan_pass_start = jiffies; + queue_work(priv->workqueue, &priv->request_scan); +} + +void iwl_setup_rx_scan_handlers(struct iwl_priv *priv) +{ + /* scan handlers */ + priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan; + priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif; + priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = + iwl_rx_scan_results_notif; + priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = + iwl_rx_scan_complete_notif; +} +EXPORT_SYMBOL(iwl_setup_rx_scan_handlers); + +static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv, + enum ieee80211_band band) +{ + if (band == IEEE80211_BAND_5GHZ) + return IWL_ACTIVE_DWELL_TIME_52; + else + return IWL_ACTIVE_DWELL_TIME_24; +} + +static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, + enum ieee80211_band band) +{ + u16 active = iwl_get_active_dwell_time(priv, band); + u16 passive = (band != IEEE80211_BAND_5GHZ) ? + IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : + IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; + + if (iwl_is_associated(priv)) { + /* If we're associated, we clamp the maximum passive + * dwell time to be 98% of the beacon interval (minus + * 2 * channel tune time) */ + passive = priv->beacon_int; + if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive) + passive = IWL_PASSIVE_DWELL_BASE; + passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; + } + + if (passive <= active) + passive = active + 1; + + return passive; +} + +static int iwl_get_channels_for_scan(struct iwl_priv *priv, + enum ieee80211_band band, + u8 is_active, u8 direct_mask, + struct iwl_scan_channel *scan_ch) +{ + const struct ieee80211_channel *channels = NULL; + const struct ieee80211_supported_band *sband; + const struct iwl_channel_info *ch_info; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added, i; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) + return 0; + + channels = sband->channels; + + active_dwell = iwl_get_active_dwell_time(priv, band); + passive_dwell = iwl_get_passive_dwell_time(priv, band); + + for (i = 0, added = 0; i < sband->n_channels; i++) { + if (channels[i].flags & IEEE80211_CHAN_DISABLED) + continue; + + scan_ch->channel = + ieee80211_frequency_to_channel(channels[i].center_freq); + + ch_info = iwl_get_channel_info(priv, band, + scan_ch->channel); + if (!is_channel_valid(ch_info)) { + IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", + scan_ch->channel); + continue; + } + + if (!is_active || is_channel_passive(ch_info) || + (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN)) + scan_ch->type = 0; /* passive */ + else + scan_ch->type = 1; /* active */ + + if (scan_ch->type & 1) + scan_ch->type |= (direct_mask << 1); + + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + + /* Set txpower levels to defaults */ + scan_ch->tpc.dsp_atten = 110; + /* scan_pwr_info->tpc.dsp_atten; */ + + /*scan_pwr_info->tpc.tx_gain; */ + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; + else { + scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); + /* NOTE: if we were doing 6Mb OFDM for scans we'd use + * power level: + * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; + */ + } + + IWL_DEBUG_SCAN("Scanning %d [%s %d]\n", + scan_ch->channel, + (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", + (scan_ch->type & 1) ? + active_dwell : passive_dwell); + + scan_ch++; + added++; + } + + IWL_DEBUG_SCAN("total channels to scan %d \n", added); + return added; +} + +int iwl_scan_initiate(struct iwl_priv *priv) +{ + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + IWL_ERROR("APs don't scan.\n"); + return 0; + } + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_SCAN("Aborting scan due to not ready.\n"); + return -EIO; + } + + if (test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_SCAN("Scan already in progress.\n"); + return -EAGAIN; + } + + if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_SCAN("Scan request while abort pending. " + "Queuing.\n"); + return -EAGAIN; + } + + IWL_DEBUG_INFO("Starting scan...\n"); + priv->scan_bands = 2; + set_bit(STATUS_SCANNING, &priv->status); + priv->scan_start = jiffies; + priv->scan_pass_start = priv->scan_start; + + queue_work(priv->workqueue, &priv->request_scan); + + return 0; +} +EXPORT_SYMBOL(iwl_scan_initiate); + +#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ) + +static void iwl_bg_scan_check(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, scan_check.work); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + if (test_bit(STATUS_SCANNING, &priv->status) || + test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting " + "adapter (%dms)\n", + jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG)); + + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) + iwl_send_scan_abort(priv); + } + mutex_unlock(&priv->mutex); +} +/** + * iwl_supported_rate_to_ie - fill in the supported rate in IE field + * + * return : set the bit for each supported rate insert in ie + */ +static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate, + u16 basic_rate, int *left) +{ + u16 ret_rates = 0, bit; + int i; + u8 *cnt = ie; + u8 *rates = ie + 1; + + for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { + if (bit & supported_rate) { + ret_rates |= bit; + rates[*cnt] = iwl_rates[i].ieee | + ((bit & basic_rate) ? 0x80 : 0x00); + (*cnt)++; + (*left)--; + if ((*left <= 0) || + (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) + break; + } + } + + return ret_rates; +} + + +static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband, + u8 *pos, int *left) +{ + struct ieee80211_ht_cap *ht_cap; + + if (!sband || !sband->ht_info.ht_supported) + return; + + if (*left < sizeof(struct ieee80211_ht_cap)) + return; + + *pos++ = sizeof(struct ieee80211_ht_cap); + ht_cap = (struct ieee80211_ht_cap *) pos; + + ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap); + memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16); + ht_cap->ampdu_params_info = + (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) | + ((sband->ht_info.ampdu_density << 2) & + IEEE80211_HT_CAP_AMPDU_DENSITY); + *left -= sizeof(struct ieee80211_ht_cap); +} + +/** + * iwl_fill_probe_req - fill in all required fields and IE for probe request + */ +static u16 iwl_fill_probe_req(struct iwl_priv *priv, + enum ieee80211_band band, + struct ieee80211_mgmt *frame, + int left, int is_direct) +{ + int len = 0; + u8 *pos = NULL; + u16 active_rates, ret_rates, cck_rates, active_rate_basic; + const struct ieee80211_supported_band *sband = + iwl_get_hw_mode(priv, band); + + /* Make sure there is enough space for the probe request, + * two mandatory IEs and the data */ + left -= 24; + if (left < 0) + return 0; + len += 24; + + frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); + memcpy(frame->da, iwl_bcast_addr, ETH_ALEN); + memcpy(frame->sa, priv->mac_addr, ETH_ALEN); + memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN); + frame->seq_ctrl = 0; + + /* fill in our indirect SSID IE */ + /* ...next IE... */ + + left -= 2; + if (left < 0) + return 0; + len += 2; + pos = &(frame->u.probe_req.variable[0]); + *pos++ = WLAN_EID_SSID; + *pos++ = 0; + + /* fill in our direct SSID IE... */ + if (is_direct) { + /* ...next IE... */ + left -= 2 + priv->essid_len; + if (left < 0) + return 0; + /* ... fill it in... */ + *pos++ = WLAN_EID_SSID; + *pos++ = priv->essid_len; + memcpy(pos, priv->essid, priv->essid_len); + pos += priv->essid_len; + len += 2 + priv->essid_len; + } + + /* fill in supported rate */ + /* ...next IE... */ + left -= 2; + if (left < 0) + return 0; + + /* ... fill it in... */ + *pos++ = WLAN_EID_SUPP_RATES; + *pos = 0; + + /* exclude 60M rate */ + active_rates = priv->rates_mask; + active_rates &= ~IWL_RATE_60M_MASK; + + active_rate_basic = active_rates & IWL_BASIC_RATES_MASK; + + cck_rates = IWL_CCK_RATES_MASK & active_rates; + ret_rates = iwl_supported_rate_to_ie(pos, cck_rates, + active_rate_basic, &left); + active_rates &= ~ret_rates; + + ret_rates = iwl_supported_rate_to_ie(pos, active_rates, + active_rate_basic, &left); + active_rates &= ~ret_rates; + + len += 2 + *pos; + pos += (*pos) + 1; + if (active_rates == 0) + goto fill_end; + + /* fill in supported extended rate */ + /* ...next IE... */ + left -= 2; + if (left < 0) + return 0; + /* ... fill it in... */ + *pos++ = WLAN_EID_EXT_SUPP_RATES; + *pos = 0; + iwl_supported_rate_to_ie(pos, active_rates, + active_rate_basic, &left); + if (*pos > 0) + len += 2 + *pos; + + fill_end: + /* fill in HT IE */ + left -= 2; + if (left < 0) + return 0; + + *pos++ = WLAN_EID_HT_CAPABILITY; + *pos = 0; + + iwl_ht_cap_to_ie(sband, pos, &left); + + if (*pos > 0) + len += 2 + *pos; + return (u16)len; +} + +static void iwl_bg_request_scan(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, request_scan); + struct iwl_host_cmd cmd = { + .id = REPLY_SCAN_CMD, + .len = sizeof(struct iwl_scan_cmd), + .meta.flags = CMD_SIZE_HUGE, + }; + struct iwl_scan_cmd *scan; + struct ieee80211_conf *conf = NULL; + u16 cmd_len; + enum ieee80211_band band; + u8 direct_mask; + int ret = 0; + + conf = ieee80211_get_hw_conf(priv->hw); + + mutex_lock(&priv->mutex); + + if (!iwl_is_ready(priv)) { + IWL_WARNING("request scan called when driver not ready.\n"); + goto done; + } + + /* Make sure the scan wasn't cancelled before this queued work + * was given the chance to run... */ + if (!test_bit(STATUS_SCANNING, &priv->status)) + goto done; + + /* This should never be called or scheduled if there is currently + * a scan active in the hardware. */ + if (test_bit(STATUS_SCAN_HW, &priv->status)) { + IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. " + "Ignoring second request.\n"); + ret = -EIO; + goto done; + } + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n"); + goto done; + } + + if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n"); + goto done; + } + + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n"); + goto done; + } + + if (!test_bit(STATUS_READY, &priv->status)) { + IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n"); + goto done; + } + + if (!priv->scan_bands) { + IWL_DEBUG_HC("Aborting scan due to no requested bands\n"); + goto done; + } + + if (!priv->scan) { + priv->scan = kmalloc(sizeof(struct iwl_scan_cmd) + + IWL_MAX_SCAN_SIZE, GFP_KERNEL); + if (!priv->scan) { + ret = -ENOMEM; + goto done; + } + } + scan = priv->scan; + memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE); + + scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; + scan->quiet_time = IWL_ACTIVE_QUIET_TIME; + + if (iwl_is_associated(priv)) { + u16 interval = 0; + u32 extra; + u32 suspend_time = 100; + u32 scan_suspend_time = 100; + unsigned long flags; + + IWL_DEBUG_INFO("Scanning while associated...\n"); + + spin_lock_irqsave(&priv->lock, flags); + interval = priv->beacon_int; + spin_unlock_irqrestore(&priv->lock, flags); + + scan->suspend_time = 0; + scan->max_out_time = cpu_to_le32(200 * 1024); + if (!interval) + interval = suspend_time; + + extra = (suspend_time / interval) << 22; + scan_suspend_time = (extra | + ((suspend_time % interval) * 1024)); + scan->suspend_time = cpu_to_le32(scan_suspend_time); + IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n", + scan_suspend_time, interval); + } + + /* We should add the ability for user to lock to PASSIVE ONLY */ + if (priv->one_direct_scan) { + IWL_DEBUG_SCAN + ("Kicking off one direct scan for '%s'\n", + iwl_escape_essid(priv->direct_ssid, + priv->direct_ssid_len)); + scan->direct_scan[0].id = WLAN_EID_SSID; + scan->direct_scan[0].len = priv->direct_ssid_len; + memcpy(scan->direct_scan[0].ssid, + priv->direct_ssid, priv->direct_ssid_len); + direct_mask = 1; + } else if (!iwl_is_associated(priv) && priv->essid_len) { + IWL_DEBUG_SCAN + ("Kicking off one direct scan for '%s' when not associated\n", + iwl_escape_essid(priv->essid, priv->essid_len)); + scan->direct_scan[0].id = WLAN_EID_SSID; + scan->direct_scan[0].len = priv->essid_len; + memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); + direct_mask = 1; + } else { + IWL_DEBUG_SCAN("Kicking off one indirect scan.\n"); + direct_mask = 0; + } + + scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; + scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id; + scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + + switch (priv->scan_bands) { + case 2: + scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; + scan->tx_cmd.rate_n_flags = + iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP, + RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK); + + scan->good_CRC_th = 0; + band = IEEE80211_BAND_2GHZ; + break; + + case 1: + scan->tx_cmd.rate_n_flags = + iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, + RATE_MCS_ANT_B_MSK); + scan->good_CRC_th = IWL_GOOD_CRC_TH; + band = IEEE80211_BAND_5GHZ; + break; + + default: + IWL_WARNING("Invalid scan band count\n"); + goto done; + } + + /* We don't build a direct scan probe request; the uCode will do + * that based on the direct_mask added to each channel entry */ + cmd_len = iwl_fill_probe_req(priv, band, + (struct ieee80211_mgmt *)scan->data, + IWL_MAX_SCAN_SIZE - sizeof(*scan), 0); + + scan->tx_cmd.len = cpu_to_le16(cmd_len); + /* select Rx chains */ + + /* Force use of chains B and C (0x6) for scan Rx. + * Avoid A (0x1) because of its off-channel reception on A-band. + * MIMO is not used here, but value is required to make uCode happy. */ + scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | + cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | + (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) | + (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS)); + + if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) + scan->filter_flags = RXON_FILTER_PROMISC_MSK; + + if (direct_mask) + scan->channel_count = + iwl_get_channels_for_scan( + priv, band, 1, /* active */ + direct_mask, + (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + else + scan->channel_count = + iwl_get_channels_for_scan( + priv, band, 0, /* passive */ + direct_mask, + (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + + scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | + RXON_FILTER_BCON_AWARE_MSK); + cmd.len += le16_to_cpu(scan->tx_cmd.len) + + scan->channel_count * sizeof(struct iwl_scan_channel); + cmd.data = scan; + scan->len = cpu_to_le16(cmd.len); + + set_bit(STATUS_SCAN_HW, &priv->status); + ret = iwl_send_cmd_sync(priv, &cmd); + if (ret) + goto done; + + queue_delayed_work(priv->workqueue, &priv->scan_check, + IWL_SCAN_CHECK_WATCHDOG); + + mutex_unlock(&priv->mutex); + return; + + done: + /* inform mac80211 scan aborted */ + queue_work(priv->workqueue, &priv->scan_completed); + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_abort_scan(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan); + + if (!iwl_is_ready(priv)) + return; + + mutex_lock(&priv->mutex); + + set_bit(STATUS_SCAN_ABORTING, &priv->status); + iwl_send_scan_abort(priv); + + mutex_unlock(&priv->mutex); +} + +void iwl_setup_scan_deferred_work(struct iwl_priv *priv) +{ + /* FIXME: move here when resolved PENDING + * INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); */ + INIT_WORK(&priv->request_scan, iwl_bg_request_scan); + INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan); + INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); +} +EXPORT_SYMBOL(iwl_setup_scan_deferred_work); + diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index af448197cc05..4183bd5ebe32 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -87,46 +87,6 @@ MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -static int iwl4965_is_empty_essid(const char *essid, int essid_len) -{ - /* Single white space is for Linksys APs */ - if (essid_len == 1 && essid[0] == ' ') - return 1; - - /* Otherwise, if the entire essid is 0, we assume it is hidden */ - while (essid_len) { - essid_len--; - if (essid[essid_len] != '\0') - return 0; - } - - return 1; -} - -static const char *iwl4965_escape_essid(const char *essid, u8 essid_len) -{ - static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; - const char *s = essid; - char *d = escaped; - - if (iwl4965_is_empty_essid(essid, essid_len)) { - memcpy(escaped, "<hidden>", sizeof("<hidden>")); - return escaped; - } - - essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE); - while (essid_len--) { - if (*s == '\0') { - *d++ = '\\'; - *d++ = '0'; - s++; - } else - *d++ = *s++; - } - *d = '\0'; - return escaped; -} - /*************** STATION TABLE MANAGEMENT **** * mac80211 should be examined to determine if sta_info is duplicating * the functionality provided here @@ -419,47 +379,6 @@ static int iwl4965_send_bt_config(struct iwl_priv *priv) sizeof(struct iwl4965_bt_cmd), &bt_cmd); } -static int iwl4965_send_scan_abort(struct iwl_priv *priv) -{ - int ret = 0; - struct iwl_rx_packet *res; - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_ABORT_CMD, - .meta.flags = CMD_WANT_SKB, - }; - - /* If there isn't a scan actively going on in the hardware - * then we are in between scan bands and not actually - * actively scanning, so don't send the abort command */ - if (!test_bit(STATUS_SCAN_HW, &priv->status)) { - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - return 0; - } - - ret = iwl_send_cmd_sync(priv, &cmd); - if (ret) { - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - return ret; - } - - res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; - if (res->u.status != CAN_ABORT_STATUS) { - /* The scan abort will return 1 for success or - * 2 for "failure". A failure condition can be - * due to simply not being in an active scan which - * can occur if we send the scan abort before we - * the microcode has notified us that a scan is - * completed. */ - IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status); - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - clear_bit(STATUS_SCAN_HW, &priv->status); - } - - dev_kfree_skb_any(cmd.meta.u.skb); - - return ret; -} - /* * CARD_STATE_CMD * @@ -605,35 +524,6 @@ static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) * ******************************************************************************/ -/** - * iwl4965_supported_rate_to_ie - fill in the supported rate in IE field - * - * return : set the bit for each supported rate insert in ie - */ -static u16 iwl4965_supported_rate_to_ie(u8 *ie, u16 supported_rate, - u16 basic_rate, int *left) -{ - u16 ret_rates = 0, bit; - int i; - u8 *cnt = ie; - u8 *rates = ie + 1; - - for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { - if (bit & supported_rate) { - ret_rates |= bit; - rates[*cnt] = iwl_rates[i].ieee | - ((bit & basic_rate) ? 0x80 : 0x00); - (*cnt)++; - (*left)--; - if ((*left <= 0) || - (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) - break; - } - } - - return ret_rates; -} - static void iwl4965_ht_conf(struct iwl_priv *priv, struct ieee80211_bss_conf *bss_conf) { @@ -686,140 +576,6 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, IWL_DEBUG_MAC80211("leave\n"); } -static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband, - u8 *pos, int *left) -{ - struct ieee80211_ht_cap *ht_cap; - - if (!sband || !sband->ht_info.ht_supported) - return; - - if (*left < sizeof(struct ieee80211_ht_cap)) - return; - - *pos++ = sizeof(struct ieee80211_ht_cap); - ht_cap = (struct ieee80211_ht_cap *) pos; - - ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap); - memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16); - ht_cap->ampdu_params_info = - (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) | - ((sband->ht_info.ampdu_density << 2) & - IEEE80211_HT_CAP_AMPDU_DENSITY); - *left -= sizeof(struct ieee80211_ht_cap); -} - -/** - * iwl4965_fill_probe_req - fill in all required fields and IE for probe request - */ -static u16 iwl4965_fill_probe_req(struct iwl_priv *priv, - enum ieee80211_band band, - struct ieee80211_mgmt *frame, - int left, int is_direct) -{ - int len = 0; - u8 *pos = NULL; - u16 active_rates, ret_rates, cck_rates, active_rate_basic; - const struct ieee80211_supported_band *sband = - iwl_get_hw_mode(priv, band); - - /* Make sure there is enough space for the probe request, - * two mandatory IEs and the data */ - left -= 24; - if (left < 0) - return 0; - len += 24; - - frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); - memcpy(frame->da, iwl_bcast_addr, ETH_ALEN); - memcpy(frame->sa, priv->mac_addr, ETH_ALEN); - memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN); - frame->seq_ctrl = 0; - - /* fill in our indirect SSID IE */ - /* ...next IE... */ - - left -= 2; - if (left < 0) - return 0; - len += 2; - pos = &(frame->u.probe_req.variable[0]); - *pos++ = WLAN_EID_SSID; - *pos++ = 0; - - /* fill in our direct SSID IE... */ - if (is_direct) { - /* ...next IE... */ - left -= 2 + priv->essid_len; - if (left < 0) - return 0; - /* ... fill it in... */ - *pos++ = WLAN_EID_SSID; - *pos++ = priv->essid_len; - memcpy(pos, priv->essid, priv->essid_len); - pos += priv->essid_len; - len += 2 + priv->essid_len; - } - - /* fill in supported rate */ - /* ...next IE... */ - left -= 2; - if (left < 0) - return 0; - - /* ... fill it in... */ - *pos++ = WLAN_EID_SUPP_RATES; - *pos = 0; - - /* exclude 60M rate */ - active_rates = priv->rates_mask; - active_rates &= ~IWL_RATE_60M_MASK; - - active_rate_basic = active_rates & IWL_BASIC_RATES_MASK; - - cck_rates = IWL_CCK_RATES_MASK & active_rates; - ret_rates = iwl4965_supported_rate_to_ie(pos, cck_rates, - active_rate_basic, &left); - active_rates &= ~ret_rates; - - ret_rates = iwl4965_supported_rate_to_ie(pos, active_rates, - active_rate_basic, &left); - active_rates &= ~ret_rates; - - len += 2 + *pos; - pos += (*pos) + 1; - if (active_rates == 0) - goto fill_end; - - /* fill in supported extended rate */ - /* ...next IE... */ - left -= 2; - if (left < 0) - return 0; - /* ... fill it in... */ - *pos++ = WLAN_EID_EXT_SUPP_RATES; - *pos = 0; - iwl4965_supported_rate_to_ie(pos, active_rates, - active_rate_basic, &left); - if (*pos > 0) - len += 2 + *pos; - - fill_end: - /* fill in HT IE */ - left -= 2; - if (left < 0) - return 0; - - *pos++ = WLAN_EID_HT_CAPABILITY; - *pos = 0; - - iwl_ht_cap_to_ie(sband, pos, &left); - - if (*pos > 0) - len += 2 + *pos; - return (u16)len; -} - /* * QoS support */ @@ -897,60 +653,6 @@ int iwl4965_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *heade return 1; } - - -/** - * iwl4965_scan_cancel - Cancel any currently executing HW scan - * - * NOTE: priv->mutex is not required before calling this function - */ -static int iwl4965_scan_cancel(struct iwl_priv *priv) -{ - if (!test_bit(STATUS_SCAN_HW, &priv->status)) { - clear_bit(STATUS_SCANNING, &priv->status); - return 0; - } - - if (test_bit(STATUS_SCANNING, &priv->status)) { - if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN("Queuing scan abort.\n"); - set_bit(STATUS_SCAN_ABORTING, &priv->status); - queue_work(priv->workqueue, &priv->abort_scan); - - } else - IWL_DEBUG_SCAN("Scan abort already in progress.\n"); - - return test_bit(STATUS_SCANNING, &priv->status); - } - - return 0; -} - -/** - * iwl4965_scan_cancel_timeout - Cancel any currently executing HW scan - * @ms: amount of time to wait (in milliseconds) for scan to abort - * - * NOTE: priv->mutex must be held before calling this function - */ -static int iwl4965_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) -{ - unsigned long now = jiffies; - int ret; - - ret = iwl4965_scan_cancel(priv); - if (ret && ms) { - mutex_unlock(&priv->mutex); - while (!time_after(jiffies, now + msecs_to_jiffies(ms)) && - test_bit(STATUS_SCANNING, &priv->status)) - msleep(1); - mutex_lock(&priv->mutex); - - return test_bit(STATUS_SCANNING, &priv->status); - } - - return ret; -} - static void iwl4965_sequence_reset(struct iwl_priv *priv) { /* Reset ieee stats */ @@ -962,7 +664,7 @@ static void iwl4965_sequence_reset(struct iwl_priv *priv) priv->last_frag_num = -1; priv->last_packet_time = 0; - iwl4965_scan_cancel(priv); + iwl_scan_cancel(priv); } #define MAX_UCODE_BEACON_INTERVAL 4096 @@ -1037,41 +739,6 @@ static void iwl4965_setup_rxon_timing(struct iwl_priv *priv) le16_to_cpu(priv->rxon_timing.atim_window)); } -static int iwl4965_scan_initiate(struct iwl_priv *priv) -{ - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("APs don't scan.\n"); - return 0; - } - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_SCAN("Aborting scan due to not ready.\n"); - return -EIO; - } - - if (test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN("Scan already in progress.\n"); - return -EAGAIN; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN("Scan request while abort pending. " - "Queuing.\n"); - return -EAGAIN; - } - - IWL_DEBUG_INFO("Starting scan...\n"); - priv->scan_bands = 2; - set_bit(STATUS_SCANNING, &priv->status); - priv->scan_start = jiffies; - priv->scan_pass_start = priv->scan_start; - - queue_work(priv->workqueue, &priv->request_scan); - - return 0; -} - - static void iwl_set_flags_for_band(struct iwl_priv *priv, enum ieee80211_band band) { @@ -1191,7 +858,7 @@ static int iwl4965_set_mode(struct iwl_priv *priv, int mode) return -EAGAIN; cancel_delayed_work(&priv->scan_check); - if (iwl4965_scan_cancel_timeout(priv, 100)) { + if (iwl_scan_cancel_timeout(priv, 100)) { IWL_WARNING("Aborted scan still in progress after 100ms\n"); IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); return -EAGAIN; @@ -1260,7 +927,7 @@ int iwl4965_radio_kill_sw(struct iwl_priv *priv, int disable_radio) disable_radio ? "OFF" : "ON"); if (disable_radio) { - iwl4965_scan_cancel(priv); + iwl_scan_cancel(priv); /* FIXME: This is a workaround for AP */ if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { spin_lock_irqsave(&priv->lock, flags); @@ -1680,118 +1347,6 @@ static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, queue_work(priv->workqueue, &priv->beacon_update); } -/* Service response to REPLY_SCAN_CMD (0x80) */ -static void iwl4965_rx_reply_scan(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_scanreq_notification *notif = - (struct iwl4965_scanreq_notification *)pkt->u.raw; - - IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status); -#endif -} - -/* Service SCAN_START_NOTIFICATION (0x82) */ -static void iwl4965_rx_scan_start_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_scanstart_notification *notif = - (struct iwl4965_scanstart_notification *)pkt->u.raw; - priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); - IWL_DEBUG_SCAN("Scan start: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", - notif->channel, - notif->band ? "bg" : "a", - notif->tsf_high, - notif->tsf_low, notif->status, notif->beacon_timer); -} - -/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ -static void iwl4965_rx_scan_results_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_scanresults_notification *notif = - (struct iwl4965_scanresults_notification *)pkt->u.raw; - - IWL_DEBUG_SCAN("Scan ch.res: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d " - "elapsed=%lu usec (%dms since last)\n", - notif->channel, - notif->band ? "bg" : "a", - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - le32_to_cpu(notif->statistics[0]), - le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf, - jiffies_to_msecs(elapsed_jiffies - (priv->last_scan_jiffies, jiffies))); - - priv->last_scan_jiffies = jiffies; - priv->next_scan_jiffies = 0; -} - -/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ -static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_scancomplete_notification *scan_notif = (void *)pkt->u.raw; - - IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", - scan_notif->scanned_channels, - scan_notif->tsf_low, - scan_notif->tsf_high, scan_notif->status); - - /* The HW is no longer scanning */ - clear_bit(STATUS_SCAN_HW, &priv->status); - - /* The scan completion notification came in, so kill that timer... */ - cancel_delayed_work(&priv->scan_check); - - IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", - (priv->scan_bands == 2) ? "2.4" : "5.2", - jiffies_to_msecs(elapsed_jiffies - (priv->scan_pass_start, jiffies))); - - /* Remove this scanned band from the list - * of pending bands to scan */ - priv->scan_bands--; - - /* If a request to abort was given, or the scan did not succeed - * then we reset the scan state machine and terminate, - * re-queuing another scan if one has been requested */ - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_INFO("Aborted scan completed.\n"); - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - } else { - /* If there are more bands on this scan pass reschedule */ - if (priv->scan_bands > 0) - goto reschedule; - } - - priv->last_scan_jiffies = jiffies; - priv->next_scan_jiffies = 0; - IWL_DEBUG_INFO("Setting scan to off\n"); - - clear_bit(STATUS_SCANNING, &priv->status); - - IWL_DEBUG_INFO("Scan took %dms\n", - jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies))); - - queue_work(priv->workqueue, &priv->scan_completed); - - return; - -reschedule: - priv->scan_pass_start = jiffies; - queue_work(priv->workqueue, &priv->request_scan); -} - /* Handle notification from uCode that card's power state is changing * due to software, hardware, or critical temperature RFKILL */ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, @@ -1852,7 +1407,7 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, clear_bit(STATUS_RF_KILL_SW, &priv->status); if (!(flags & RXON_CARD_DISABLED)) - iwl4965_scan_cancel(priv); + iwl_scan_cancel(priv); if ((test_bit(STATUS_RF_KILL_HW, &status) != test_bit(STATUS_RF_KILL_HW, &priv->status)) || @@ -1902,13 +1457,9 @@ static void iwl4965_setup_rx_handlers(struct iwl_priv *priv) */ priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl4965_hw_rx_statistics; priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl4965_hw_rx_statistics; - /* scan handlers */ - priv->rx_handlers[REPLY_SCAN_CMD] = iwl4965_rx_reply_scan; - priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl4965_rx_scan_start_notif; - priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = - iwl4965_rx_scan_results_notif; - priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = - iwl4965_rx_scan_complete_notif; + + iwl_setup_rx_scan_handlers(priv); + /* status change handler */ priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif; @@ -2456,138 +2007,6 @@ static irqreturn_t iwl4965_isr(int irq, void *data) return IRQ_NONE; } -/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after - * sending probe req. This should be set long enough to hear probe responses - * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (10) - -/* For faster active scanning, scan will move to the next channel if fewer than - * PLCP_QUIET_THRESH packets are heard on this channel within - * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell - * time if it's a quiet channel (nothing responded to our probe, and there's - * no other traffic). - * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ -#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */ -#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */ - -/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. - * Must be set longer than active dwell time. - * For the most reliable scan, set > AP beacon interval (typically 100msec). */ -#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_PASSIVE_DWELL_TIME_52 (10) -#define IWL_PASSIVE_DWELL_BASE (100) -#define IWL_CHANNEL_TUNE_TIME 5 - -static inline u16 iwl4965_get_active_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band) -{ - if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52; - else - return IWL_ACTIVE_DWELL_TIME_24; -} - -static u16 iwl4965_get_passive_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band) -{ - u16 active = iwl4965_get_active_dwell_time(priv, band); - u16 passive = (band != IEEE80211_BAND_5GHZ) ? - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; - - if (iwl_is_associated(priv)) { - /* If we're associated, we clamp the maximum passive - * dwell time to be 98% of the beacon interval (minus - * 2 * channel tune time) */ - passive = priv->beacon_int; - if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive) - passive = IWL_PASSIVE_DWELL_BASE; - passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; - } - - if (passive <= active) - passive = active + 1; - - return passive; -} - -static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, - enum ieee80211_band band, - u8 is_active, u8 direct_mask, - struct iwl4965_scan_channel *scan_ch) -{ - const struct ieee80211_channel *channels = NULL; - const struct ieee80211_supported_band *sband; - const struct iwl_channel_info *ch_info; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) - return 0; - - channels = sband->channels; - - active_dwell = iwl4965_get_active_dwell_time(priv, band); - passive_dwell = iwl4965_get_passive_dwell_time(priv, band); - - for (i = 0, added = 0; i < sband->n_channels; i++) { - if (channels[i].flags & IEEE80211_CHAN_DISABLED) - continue; - - scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq); - - ch_info = iwl_get_channel_info(priv, band, - scan_ch->channel); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", - scan_ch->channel); - continue; - } - - if (!is_active || is_channel_passive(ch_info) || - (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN)) - scan_ch->type = 0; /* passive */ - else - scan_ch->type = 1; /* active */ - - if (scan_ch->type & 1) - scan_ch->type |= (direct_mask << 1); - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - - /* Set txpower levels to defaults */ - scan_ch->tpc.dsp_atten = 110; - /* scan_pwr_info->tpc.dsp_atten; */ - - /*scan_pwr_info->tpc.tx_gain; */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; - else { - scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - } - - IWL_DEBUG_SCAN("Scanning %d [%s %d]\n", - scan_ch->channel, - (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", - (scan_ch->type & 1) ? - active_dwell : passive_dwell); - - scan_ch++; - added++; - } - - IWL_DEBUG_SCAN("total channels to scan %d \n", added); - return added; -} - /****************************************************************************** * * uCode download functions @@ -3200,243 +2619,6 @@ static void iwl4965_bg_set_monitor(struct work_struct *work) mutex_unlock(&priv->mutex); } -#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ) - -static void iwl4965_bg_scan_check(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, scan_check.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - if (test_bit(STATUS_SCANNING, &priv->status) || - test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting " - "adapter (%dms)\n", - jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG)); - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - iwl4965_send_scan_abort(priv); - } - mutex_unlock(&priv->mutex); -} - -static void iwl4965_bg_request_scan(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, request_scan); - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_CMD, - .len = sizeof(struct iwl4965_scan_cmd), - .meta.flags = CMD_SIZE_HUGE, - }; - struct iwl4965_scan_cmd *scan; - struct ieee80211_conf *conf = NULL; - u16 cmd_len; - enum ieee80211_band band; - u8 direct_mask; - int ret = 0; - - conf = ieee80211_get_hw_conf(priv->hw); - - mutex_lock(&priv->mutex); - - if (!iwl_is_ready(priv)) { - IWL_WARNING("request scan called when driver not ready.\n"); - goto done; - } - - /* Make sure the scan wasn't cancelled before this queued work - * was given the chance to run... */ - if (!test_bit(STATUS_SCANNING, &priv->status)) - goto done; - - /* This should never be called or scheduled if there is currently - * a scan active in the hardware. */ - if (test_bit(STATUS_SCAN_HW, &priv->status)) { - IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. " - "Ignoring second request.\n"); - ret = -EIO; - goto done; - } - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n"); - goto done; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n"); - goto done; - } - - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n"); - goto done; - } - - if (!test_bit(STATUS_READY, &priv->status)) { - IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n"); - goto done; - } - - if (!priv->scan_bands) { - IWL_DEBUG_HC("Aborting scan due to no requested bands\n"); - goto done; - } - - if (!priv->scan) { - priv->scan = kmalloc(sizeof(struct iwl4965_scan_cmd) + - IWL_MAX_SCAN_SIZE, GFP_KERNEL); - if (!priv->scan) { - ret = -ENOMEM; - goto done; - } - } - scan = priv->scan; - memset(scan, 0, sizeof(struct iwl4965_scan_cmd) + IWL_MAX_SCAN_SIZE); - - scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; - scan->quiet_time = IWL_ACTIVE_QUIET_TIME; - - if (iwl_is_associated(priv)) { - u16 interval = 0; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - unsigned long flags; - - IWL_DEBUG_INFO("Scanning while associated...\n"); - - spin_lock_irqsave(&priv->lock, flags); - interval = priv->beacon_int; - spin_unlock_irqrestore(&priv->lock, flags); - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - - extra = (suspend_time / interval) << 22; - scan_suspend_time = (extra | - ((suspend_time % interval) * 1024)); - scan->suspend_time = cpu_to_le32(scan_suspend_time); - IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } - - /* We should add the ability for user to lock to PASSIVE ONLY */ - if (priv->one_direct_scan) { - IWL_DEBUG_SCAN - ("Kicking off one direct scan for '%s'\n", - iwl4965_escape_essid(priv->direct_ssid, - priv->direct_ssid_len)); - scan->direct_scan[0].id = WLAN_EID_SSID; - scan->direct_scan[0].len = priv->direct_ssid_len; - memcpy(scan->direct_scan[0].ssid, - priv->direct_ssid, priv->direct_ssid_len); - direct_mask = 1; - } else if (!iwl_is_associated(priv) && priv->essid_len) { - IWL_DEBUG_SCAN - ("Kicking off one direct scan for '%s' when not associated\n", - iwl4965_escape_essid(priv->essid, priv->essid_len)); - scan->direct_scan[0].id = WLAN_EID_SSID; - scan->direct_scan[0].len = priv->essid_len; - memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); - direct_mask = 1; - } else { - IWL_DEBUG_SCAN("Kicking off one indirect scan.\n"); - direct_mask = 0; - } - - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - - switch (priv->scan_bands) { - case 2: - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - scan->tx_cmd.rate_n_flags = - iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP, - RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK); - - scan->good_CRC_th = 0; - band = IEEE80211_BAND_2GHZ; - break; - - case 1: - scan->tx_cmd.rate_n_flags = - iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, - RATE_MCS_ANT_B_MSK); - scan->good_CRC_th = IWL_GOOD_CRC_TH; - band = IEEE80211_BAND_5GHZ; - break; - - default: - IWL_WARNING("Invalid scan band count\n"); - goto done; - } - - /* We don't build a direct scan probe request; the uCode will do - * that based on the direct_mask added to each channel entry */ - cmd_len = iwl4965_fill_probe_req(priv, band, - (struct ieee80211_mgmt *)scan->data, - IWL_MAX_SCAN_SIZE - sizeof(*scan), 0); - - scan->tx_cmd.len = cpu_to_le16(cmd_len); - /* select Rx chains */ - - /* Force use of chains B and C (0x6) for scan Rx. - * Avoid A (0x1) because of its off-channel reception on A-band. - * MIMO is not used here, but value is required to make uCode happy. */ - scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | - cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | - (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) | - (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS)); - - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) - scan->filter_flags = RXON_FILTER_PROMISC_MSK; - - if (direct_mask) - scan->channel_count = - iwl4965_get_channels_for_scan( - priv, band, 1, /* active */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - else - scan->channel_count = - iwl4965_get_channels_for_scan( - priv, band, 0, /* passive */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - - scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | - RXON_FILTER_BCON_AWARE_MSK); - cmd.len += le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct iwl4965_scan_channel); - cmd.data = scan; - scan->len = cpu_to_le16(cmd.len); - - set_bit(STATUS_SCAN_HW, &priv->status); - ret = iwl_send_cmd_sync(priv, &cmd); - if (ret) - goto done; - - queue_delayed_work(priv->workqueue, &priv->scan_check, - IWL_SCAN_CHECK_WATCHDOG); - - mutex_unlock(&priv->mutex); - return; - - done: - /* inform mac80211 scan aborted */ - queue_work(priv->workqueue, &priv->scan_completed); - mutex_unlock(&priv->mutex); -} - static void iwl_bg_run_time_calib_work(struct work_struct *work) { struct iwl_priv *priv = container_of(work, struct iwl_priv, @@ -3521,7 +2703,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) if (!priv->vif || !priv->is_open) return; - iwl4965_scan_cancel_timeout(priv, 200); + iwl_scan_cancel_timeout(priv, 200); conf = ieee80211_get_hw_conf(priv->hw); @@ -3615,24 +2797,9 @@ static void iwl4965_bg_post_associate(struct work_struct *data) } -static void iwl4965_bg_abort_scan(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan); - - if (!iwl_is_ready(priv)) - return; - - mutex_lock(&priv->mutex); - - set_bit(STATUS_SCAN_ABORTING, &priv->status); - iwl4965_send_scan_abort(priv); - - mutex_unlock(&priv->mutex); -} - static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); -static void iwl4965_bg_scan_completed(struct work_struct *work) +static void iwl_bg_scan_completed(struct work_struct *work) { struct iwl_priv *priv = container_of(work, struct iwl_priv, scan_completed); @@ -3759,7 +2926,7 @@ static void iwl4965_mac_stop(struct ieee80211_hw *hw) * RXON_FILTER_ASSOC_MSK BIT */ mutex_lock(&priv->mutex); - iwl4965_scan_cancel_timeout(priv, 100); + iwl_scan_cancel_timeout(priv, 100); cancel_delayed_work(&priv->post_associate); mutex_unlock(&priv->mutex); } @@ -4071,7 +3238,7 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, !is_multicast_ether_addr(conf->bssid)) { /* If there is currently a HW scan going on in the background * then we need to cancel it else the RXON below will fail. */ - if (iwl4965_scan_cancel_timeout(priv, 100)) { + if (iwl_scan_cancel_timeout(priv, 100)) { IWL_WARNING("Aborted scan still in progress " "after 100ms\n"); IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); @@ -4096,7 +3263,7 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, } } else { - iwl4965_scan_cancel_timeout(priv, 100); + iwl_scan_cancel_timeout(priv, 100); priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; iwl4965_commit_rxon(priv); } @@ -4154,7 +3321,7 @@ static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); if (iwl_is_ready_rf(priv)) { - iwl4965_scan_cancel_timeout(priv, 100); + iwl_scan_cancel_timeout(priv, 100); cancel_delayed_work(&priv->post_associate); priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; iwl4965_commit_rxon(priv); @@ -4268,7 +3435,7 @@ static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) } if (len) { IWL_DEBUG_SCAN("direct scan for %s [%d]\n ", - iwl4965_escape_essid(ssid, len), (int)len); + iwl_escape_essid(ssid, len), (int)len); priv->one_direct_scan = 1; priv->direct_ssid_len = (u8) @@ -4277,7 +3444,7 @@ static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) } else priv->one_direct_scan = 0; - rc = iwl4965_scan_initiate(priv); + rc = iwl_scan_initiate(priv); IWL_DEBUG_MAC80211("leave\n"); @@ -4308,7 +3475,7 @@ static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, return; } - iwl4965_scan_cancel_timeout(priv, 100); + iwl_scan_cancel_timeout(priv, 100); key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); @@ -4366,7 +3533,7 @@ static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, } mutex_lock(&priv->mutex); - iwl4965_scan_cancel_timeout(priv, 100); + iwl_scan_cancel_timeout(priv, 100); mutex_unlock(&priv->mutex); /* If we are getting WEP group key and we didn't receive any key mapping @@ -4562,7 +3729,7 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) * clear RXON_FILTER_ASSOC_MSK bit */ if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { - iwl4965_scan_cancel_timeout(priv, 100); + iwl_scan_cancel_timeout(priv, 100); priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; iwl4965_commit_rxon(priv); } @@ -4759,7 +3926,7 @@ static ssize_t store_flags(struct device *d, mutex_lock(&priv->mutex); if (le32_to_cpu(priv->staging_rxon.flags) != flags) { /* Cancel any currently running scans... */ - if (iwl4965_scan_cancel_timeout(priv, 100)) + if (iwl_scan_cancel_timeout(priv, 100)) IWL_WARNING("Could not cancel scan.\n"); else { IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n", @@ -4794,7 +3961,7 @@ static ssize_t store_filter_flags(struct device *d, mutex_lock(&priv->mutex); if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { /* Cancel any currently running scans... */ - if (iwl4965_scan_cancel_timeout(priv, 100)) + if (iwl_scan_cancel_timeout(priv, 100)) IWL_WARNING("Could not cancel scan.\n"); else { IWL_DEBUG_INFO("Committing rxon.filter_flags = " @@ -5062,9 +4229,6 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv) INIT_WORK(&priv->up, iwl4965_bg_up); INIT_WORK(&priv->restart, iwl4965_bg_restart); INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish); - INIT_WORK(&priv->scan_completed, iwl4965_bg_scan_completed); - INIT_WORK(&priv->request_scan, iwl4965_bg_request_scan); - INIT_WORK(&priv->abort_scan, iwl4965_bg_abort_scan); INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill); INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update); INIT_WORK(&priv->set_monitor, iwl4965_bg_set_monitor); @@ -5072,7 +4236,10 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv) INIT_DELAYED_WORK(&priv->post_associate, iwl4965_bg_post_associate); INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start); INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start); - INIT_DELAYED_WORK(&priv->scan_check, iwl4965_bg_scan_check); + + /* FIXME : remove when resolved PENDING */ + INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); + iwl_setup_scan_deferred_work(priv); if (priv->cfg->ops->lib->setup_deferred_work) priv->cfg->ops->lib->setup_deferred_work(priv); |