diff options
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/b43/leds.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/b43/main.c | 12 | ||||
-rw-r--r-- | drivers/net/wireless/b43legacy/dma.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/b43legacy/main.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-scan.c | 33 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl3945-base.c | 33 | ||||
-rw-r--r-- | drivers/net/wireless/prism54/islpci_eth.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2500usb.c | 36 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00.h | 1 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 38 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00mac.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt73usb.c | 36 |
12 files changed, 123 insertions, 83 deletions
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 36a9c42df835..76f4c7bad8b8 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -72,6 +72,9 @@ static void b43_led_brightness_set(struct led_classdev *led_dev, struct b43_wldev *dev = led->dev; bool radio_enabled; + if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) + return; + /* Checking the radio-enabled status here is slightly racy, * but we want to avoid the locking overhead and we don't care * whether the LED has the wrong state for a second. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 7bca8e981512..704dd3551fff 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2976,12 +2976,11 @@ static int b43_op_tx(struct ieee80211_hw *hw, if (unlikely(skb->len < 2 + 2 + 6)) { /* Too short, this can't be a valid frame. */ - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + goto drop_packet; } B43_WARN_ON(skb_shinfo(skb)->nr_frags); if (unlikely(!dev)) - return NETDEV_TX_BUSY; + goto drop_packet; /* Transmissions on seperate queues can run concurrently. */ read_lock_irqsave(&wl->tx_lock, flags); @@ -2997,7 +2996,12 @@ static int b43_op_tx(struct ieee80211_hw *hw, read_unlock_irqrestore(&wl->tx_lock, flags); if (unlikely(err)) - return NETDEV_TX_BUSY; + goto drop_packet; + return NETDEV_TX_OK; + +drop_packet: + /* We can not transmit this packet. Drop it. */ + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index 33cc256c5baf..203b0f42ac58 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -876,6 +876,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, if (!ring) goto out; ring->type = type; + ring->dev = dev; nr_slots = B43legacy_RXRING_SLOTS; if (for_tx) @@ -922,7 +923,6 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, DMA_TO_DEVICE); } - ring->dev = dev; ring->nr_slots = nr_slots; ring->mmio_base = b43legacy_dmacontroller_base(type, controller_index); ring->index = controller_index; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 5f533b93ad5d..069157eea05c 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2377,8 +2377,10 @@ static int b43legacy_op_tx(struct ieee80211_hw *hw, } else err = b43legacy_dma_tx(dev, skb); out: - if (unlikely(err)) - return NETDEV_TX_BUSY; + if (unlikely(err)) { + /* Drop the packet. */ + dev_kfree_skb_any(skb); + } return NETDEV_TX_OK; } diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 5ca181f7125d..5b420b43af5c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -276,13 +276,18 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, cancel_delayed_work(&priv->scan_check); IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", - (priv->scan_bands == 2) ? "2.4" : "5.2", + (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? + "2.4" : "5.2", jiffies_to_msecs(elapsed_jiffies (priv->scan_pass_start, jiffies))); - /* Remove this scanned band from the list - * of pending bands to scan */ - priv->scan_bands--; + /* Remove this scanned band from the list of pending + * bands to scan, band G precedes A in order of scanning + * as seen in iwl_bg_request_scan */ + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ); + else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ); /* If a request to abort was given, or the scan did not succeed * then we reset the scan state machine and terminate, @@ -292,7 +297,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, clear_bit(STATUS_SCAN_ABORTING, &priv->status); } else { /* If there are more bands on this scan pass reschedule */ - if (priv->scan_bands > 0) + if (priv->scan_bands) goto reschedule; } @@ -389,7 +394,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, ch_info = iwl_get_channel_info(priv, band, scan_ch->channel); if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", + IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n", scan_ch->channel); continue; } @@ -465,7 +470,10 @@ int iwl_scan_initiate(struct iwl_priv *priv) } IWL_DEBUG_INFO("Starting scan...\n"); - priv->scan_bands = 2; + if (priv->cfg->sku & IWL_SKU_G) + priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ); + if (priv->cfg->sku & IWL_SKU_A) + priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ); set_bit(STATUS_SCANNING, &priv->status); priv->scan_start = jiffies; priv->scan_pass_start = priv->scan_start; @@ -803,8 +811,7 @@ static void iwl_bg_request_scan(struct work_struct *data) scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - switch (priv->scan_bands) { - case 2: + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) { band = IEEE80211_BAND_2GHZ; scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; tx_ant = iwl_scan_tx_ant(priv, band); @@ -818,9 +825,7 @@ static void iwl_bg_request_scan(struct work_struct *data) tx_ant | RATE_MCS_CCK_MSK); scan->good_CRC_th = 0; - break; - - case 1: + } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) { band = IEEE80211_BAND_5GHZ; tx_ant = iwl_scan_tx_ant(priv, band); scan->tx_cmd.rate_n_flags = @@ -833,9 +838,7 @@ static void iwl_bg_request_scan(struct work_struct *data) * MIMO is not used here, but value is required */ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) rx_chain = 0x6; - - break; - default: + } else { IWL_WARNING("Invalid scan band count\n"); goto done; } diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 47cf4b997f50..92d1b2e312d4 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2217,7 +2217,10 @@ static int iwl3945_scan_initiate(struct iwl3945_priv *priv) } IWL_DEBUG_INFO("Starting scan...\n"); - priv->scan_bands = 2; + if (priv->cfg->sku & IWL_SKU_G) + priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ); + if (priv->cfg->sku & IWL_SKU_A) + priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ); set_bit(STATUS_SCANNING, &priv->status); priv->scan_start = jiffies; priv->scan_pass_start = priv->scan_start; @@ -3342,13 +3345,18 @@ static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv, cancel_delayed_work(&priv->scan_check); IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", - (priv->scan_bands == 2) ? "2.4" : "5.2", + (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? + "2.4" : "5.2", jiffies_to_msecs(elapsed_jiffies (priv->scan_pass_start, jiffies))); - /* Remove this scanned band from the list - * of pending bands to scan */ - priv->scan_bands--; + /* Remove this scanned band from the list of pending + * bands to scan, band G precedes A in order of scanning + * as seen in iwl3945_bg_request_scan */ + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ); + else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ); /* If a request to abort was given, or the scan did not succeed * then we reset the scan state machine and terminate, @@ -4961,7 +4969,7 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel); if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", + IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n", scan_ch->channel); continue; } @@ -6316,21 +6324,16 @@ static void iwl3945_bg_request_scan(struct work_struct *data) /* flags + rate selection */ - switch (priv->scan_bands) { - case 2: + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) { scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; scan->tx_cmd.rate = IWL_RATE_1M_PLCP; scan->good_CRC_th = 0; band = IEEE80211_BAND_2GHZ; - break; - - case 1: + } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) { scan->tx_cmd.rate = IWL_RATE_6M_PLCP; scan->good_CRC_th = IWL_GOOD_CRC_TH; band = IEEE80211_BAND_5GHZ; - break; - - default: + } else { IWL_WARNING("Invalid scan band count\n"); goto done; } @@ -6770,7 +6773,7 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co ch_info = iwl3945_get_channel_info(priv, conf->channel->band, conf->channel->hw_value); if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n", + IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n", conf->channel->hw_value, conf->channel->band); IWL_DEBUG_MAC80211("leave - invalid channel\n"); spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 762e85bef55d..e43bae97ed8f 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -290,7 +290,7 @@ islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) avs->version = cpu_to_be32(P80211CAPTURE_VERSION); avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header)); - avs->mactime = cpu_to_be64(le64_to_cpu(clock)); + avs->mactime = cpu_to_be64(clock); avs->hosttime = cpu_to_be64(jiffies); avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */ avs->channel = cpu_to_be32(channel_of_freq(freq)); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 9851cefaabf3..0462d6d35b8a 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -138,11 +138,8 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - return; - } + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) + goto exit_fail; /* * Write the data into the BBP. @@ -155,6 +152,13 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev, rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return; + +exit_fail: + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); } static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -168,10 +172,8 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); - return; - } + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) + goto exit_fail; /* * Write the request into the BBP. @@ -186,17 +188,21 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); - *value = 0xff; - mutex_unlock(&rt2x00dev->usb_cache_mutex); - return; - } + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) + goto exit_fail; rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, ®); *value = rt2x00_get_field16(reg, PHY_CSR7_DATA); mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return; + +exit_fail: + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); + *value = 0xff; } static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev, diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 0da8f972a1b2..52d8e9688219 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -818,6 +818,7 @@ struct rt2x00_dev { /* * Scheduled work. */ + struct workqueue_struct *workqueue; struct work_struct intf_work; struct work_struct filter_work; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 9ea677320daa..cc4fee105ed6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -74,7 +74,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) rt2x00lib_reset_link_tuner(rt2x00dev); - queue_delayed_work(rt2x00dev->hw->workqueue, + queue_delayed_work(rt2x00dev->workqueue, &rt2x00dev->link.work, LINK_TUNE_INTERVAL); } @@ -138,14 +138,6 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) return; /* - * Stop all scheduled work. - */ - if (work_pending(&rt2x00dev->intf_work)) - cancel_work_sync(&rt2x00dev->intf_work); - if (work_pending(&rt2x00dev->filter_work)) - cancel_work_sync(&rt2x00dev->filter_work); - - /* * Stop the TX queues. */ ieee80211_stop_queues(rt2x00dev->hw); @@ -400,8 +392,8 @@ static void rt2x00lib_link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ rt2x00dev->link.count++; - queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, - LINK_TUNE_INTERVAL); + queue_delayed_work(rt2x00dev->workqueue, + &rt2x00dev->link.work, LINK_TUNE_INTERVAL); } static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) @@ -434,6 +426,15 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, spin_unlock(&intf->lock); + /* + * It is possible the radio was disabled while the work had been + * scheduled. If that happens we should return here immediately, + * note that in the spinlock protected area above the delayed_flags + * have been cleared correctly. + */ + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + if (delayed_flags & DELAYED_UPDATE_BEACON) { skb = ieee80211_beacon_get(rt2x00dev->hw, vif); if (skb && @@ -442,7 +443,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, } if (delayed_flags & DELAYED_CONFIG_ERP) - rt2x00lib_config_erp(rt2x00dev, intf, &intf->conf); + rt2x00lib_config_erp(rt2x00dev, intf, &conf); if (delayed_flags & DELAYED_LED_ASSOC) rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated); @@ -488,7 +489,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) rt2x00lib_beacondone_iter, rt2x00dev); - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work); } EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); @@ -1003,6 +1004,10 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Initialize configuration work. */ + rt2x00dev->workqueue = create_singlethread_workqueue("rt2x00lib"); + if (!rt2x00dev->workqueue) + goto exit; + INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled); INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); @@ -1063,6 +1068,13 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) rt2x00leds_unregister(rt2x00dev); /* + * Stop all queued work. Note that most tasks will already be halted + * during rt2x00lib_disable_radio() and rt2x00lib_uninitialize(). + */ + flush_workqueue(rt2x00dev->workqueue); + destroy_workqueue(rt2x00dev->workqueue); + + /* * Free ieee80211_hw memory. */ rt2x00lib_remove_hw(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c90992f613fe..1253da89295b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -431,7 +431,7 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); else - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->filter_work); } EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); @@ -512,7 +512,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, memcpy(&intf->conf, bss_conf, sizeof(*bss_conf)); if (delayed) { intf->delayed_flags |= delayed; - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work); } spin_unlock(&intf->lock); } diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index fceefd730ab8..675ff7900eee 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -134,11 +134,8 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - return; - } + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) + goto exit_fail; /* * Write the data into the BBP. @@ -151,6 +148,13 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return; + +exit_fail: + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); } static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -164,11 +168,8 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - return; - } + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) + goto exit_fail; /* * Write the request into the BBP. @@ -184,14 +185,19 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - *value = 0xff; - return; - } + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) + goto exit_fail; *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return; + +exit_fail: + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); + *value = 0xff; } static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev, |