summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-1000.c71
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-5000.c88
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-6000.c338
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c3
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c304
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-lib.c1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-rs.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-rxon.c9
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-tx.c9
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.c17
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h5
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-debug.h2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-debugfs.c7
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-dev.h1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-eeprom.c25
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-eeprom.h53
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-prph.h2
17 files changed, 262 insertions, 675 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index af85458401a4..ba78bc8a259f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -147,7 +147,11 @@ static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
- priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+ if (priv->cfg->rx_with_siso_diversity)
+ priv->hw_params.rx_chains_num = 1;
+ else
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->cfg->valid_rx_ant);
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
@@ -272,60 +276,49 @@ static struct iwl_ht_params iwl1000_ht_params = {
.use_rts_for_aggregation = true, /* use rts/cts protection */
};
+#define IWL_DEVICE_1000 \
+ .fw_name_pre = IWL1000_FW_PRE, \
+ .ucode_api_max = IWL1000_UCODE_API_MAX, \
+ .ucode_api_min = IWL1000_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
+ .ops = &iwl1000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl1000_base_params, \
+ .led_mode = IWL_LED_BLINK
+
struct iwl_cfg iwl1000_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
- .fw_name_pre = IWL1000_FW_PRE,
- .ucode_api_max = IWL1000_UCODE_API_MAX,
- .ucode_api_min = IWL1000_UCODE_API_MIN,
- .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
- .ops = &iwl1000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl1000_base_params,
+ IWL_DEVICE_1000,
.ht_params = &iwl1000_ht_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl1000_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1000 BG",
- .fw_name_pre = IWL1000_FW_PRE,
- .ucode_api_max = IWL1000_UCODE_API_MAX,
- .ucode_api_min = IWL1000_UCODE_API_MIN,
- .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
- .ops = &iwl1000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl1000_base_params,
- .led_mode = IWL_LED_BLINK,
+ IWL_DEVICE_1000,
};
+#define IWL_DEVICE_100 \
+ .fw_name_pre = IWL100_FW_PRE, \
+ .ucode_api_max = IWL100_UCODE_API_MAX, \
+ .ucode_api_min = IWL100_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
+ .ops = &iwl1000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl1000_base_params, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .rx_with_siso_diversity = true
+
struct iwl_cfg iwl100_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 100 BGN",
- .fw_name_pre = IWL100_FW_PRE,
- .ucode_api_max = IWL100_UCODE_API_MAX,
- .ucode_api_min = IWL100_UCODE_API_MIN,
- .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
- .ops = &iwl1000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl1000_base_params,
+ IWL_DEVICE_100,
.ht_params = &iwl1000_ht_params,
- .led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl100_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 100 BG",
- .fw_name_pre = IWL100_FW_PRE,
- .ucode_api_max = IWL100_UCODE_API_MAX,
- .ucode_api_min = IWL100_UCODE_API_MIN,
- .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
- .ops = &iwl1000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl1000_base_params,
- .led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
+ IWL_DEVICE_100,
};
MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 8435e5a4e69d..79ab0a6b1386 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -520,65 +520,44 @@ static struct iwl_ht_params iwl5000_ht_params = {
.use_rts_for_aggregation = true, /* use rts/cts protection */
};
+#define IWL_DEVICE_5000 \
+ .fw_name_pre = IWL5000_FW_PRE, \
+ .ucode_api_max = IWL5000_UCODE_API_MAX, \
+ .ucode_api_min = IWL5000_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_5000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, \
+ .ops = &iwl5000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl5000_base_params, \
+ .led_mode = IWL_LED_BLINK
+
struct iwl_cfg iwl5300_agn_cfg = {
.name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
- .fw_name_pre = IWL5000_FW_PRE,
- .ucode_api_max = IWL5000_UCODE_API_MAX,
- .ucode_api_min = IWL5000_UCODE_API_MIN,
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
+ IWL_DEVICE_5000,
.ht_params = &iwl5000_ht_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_bgn_cfg = {
.name = "Intel(R) WiFi Link 5100 BGN",
- .fw_name_pre = IWL5000_FW_PRE,
- .ucode_api_max = IWL5000_UCODE_API_MAX,
- .ucode_api_min = IWL5000_UCODE_API_MIN,
+ IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_abg_cfg = {
.name = "Intel(R) WiFi Link 5100 ABG",
- .fw_name_pre = IWL5000_FW_PRE,
- .ucode_api_max = IWL5000_UCODE_API_MAX,
- .ucode_api_min = IWL5000_UCODE_API_MIN,
+ IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_agn_cfg = {
.name = "Intel(R) WiFi Link 5100 AGN",
- .fw_name_pre = IWL5000_FW_PRE,
- .ucode_api_max = IWL5000_UCODE_API_MAX,
- .ucode_api_min = IWL5000_UCODE_API_MIN,
+ IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5350_agn_cfg = {
@@ -593,35 +572,32 @@ struct iwl_cfg iwl5350_agn_cfg = {
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
.led_mode = IWL_LED_BLINK,
+ .internal_wimax_coex = true,
};
+#define IWL_DEVICE_5150 \
+ .fw_name_pre = IWL5150_FW_PRE, \
+ .ucode_api_max = IWL5150_UCODE_API_MAX, \
+ .ucode_api_min = IWL5150_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_5050_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, \
+ .ops = &iwl5150_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl5000_base_params, \
+ .need_dc_calib = true, \
+ .led_mode = IWL_LED_BLINK, \
+ .internal_wimax_coex = true
+
struct iwl_cfg iwl5150_agn_cfg = {
.name = "Intel(R) WiMAX/WiFi Link 5150 AGN",
- .fw_name_pre = IWL5150_FW_PRE,
- .ucode_api_max = IWL5150_UCODE_API_MAX,
- .ucode_api_min = IWL5150_UCODE_API_MIN,
- .eeprom_ver = EEPROM_5050_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
- .ops = &iwl5150_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
+ IWL_DEVICE_5150,
.ht_params = &iwl5000_ht_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_BLINK,
+
};
struct iwl_cfg iwl5150_abg_cfg = {
.name = "Intel(R) WiMAX/WiFi Link 5150 ABG",
- .fw_name_pre = IWL5150_FW_PRE,
- .ucode_api_max = IWL5150_UCODE_API_MAX,
- .ucode_api_min = IWL5150_UCODE_API_MIN,
- .eeprom_ver = EEPROM_5050_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
- .ops = &iwl5150_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_BLINK,
+ IWL_DEVICE_5150,
};
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index a848ca06dc6f..f4bec3201ef9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -182,7 +182,11 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
- priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+ if (priv->cfg->rx_with_siso_diversity)
+ priv->hw_params.rx_chains_num = 1;
+ else
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->cfg->valid_rx_ant);
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
@@ -511,7 +515,7 @@ static struct iwl_base_params iwl6050_base_params = {
.chain_noise_calib_by_driver = true,
.shadow_reg_enable = true,
};
-static struct iwl_base_params iwl6000_coex_base_params = {
+static struct iwl_base_params iwl6000_g2_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
@@ -520,7 +524,7 @@ static struct iwl_base_params iwl6000_coex_base_params = {
.use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
- .led_compensation = 51,
+ .led_compensation = 57,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
@@ -550,243 +554,156 @@ static struct iwl_bt_params iwl6000_bt_params = {
.bt_sco_disable = true,
};
+#define IWL_DEVICE_6005 \
+ .fw_name_pre = IWL6000G2A_FW_PRE, \
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, \
+ .ops = &iwl6000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl6000_g2_base_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE
+
struct iwl_cfg iwl6005_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
- .fw_name_pre = IWL6000G2A_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
+ IWL_DEVICE_6005,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6005_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
- .fw_name_pre = IWL6000G2A_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
+ IWL_DEVICE_6005,
};
struct iwl_cfg iwl6005_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
- .fw_name_pre = IWL6000G2A_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
-};
+ IWL_DEVICE_6005,
+};
+
+#define IWL_DEVICE_6030 \
+ .fw_name_pre = IWL6000G2B_FW_PRE, \
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, \
+ .ops = &iwl6000g2b_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl6000_g2_base_params, \
+ .bt_params = &iwl6000_bt_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true, \
+ /* \
+ *Due to bluetooth, we transmit 2.4 GHz probes \
+ * only on antenna A \
+ */ \
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A
struct iwl_cfg iwl6030_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_coex_base_params,
- .bt_params = &iwl6000_bt_params,
+ IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6030_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_coex_base_params,
- .bt_params = &iwl6000_bt_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
+ IWL_DEVICE_6030,
};
struct iwl_cfg iwl6030_2bgn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_coex_base_params,
- .bt_params = &iwl6000_bt_params,
+ IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6030_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_coex_base_params,
- .bt_params = &iwl6000_bt_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
+ IWL_DEVICE_6030,
};
struct iwl_cfg iwl1030_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_coex_base_params,
- .bt_params = &iwl6000_bt_params,
+ IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl1030_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_coex_base_params,
- .bt_params = &iwl6000_bt_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
+ IWL_DEVICE_6030,
+};
+
+struct iwl_cfg iwl130_bgn_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
+ IWL_DEVICE_6030,
+ .ht_params = &iwl6000_ht_params,
+ .rx_with_siso_diversity = true,
+};
+
+struct iwl_cfg iwl130_bg_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N 130 BG",
+ IWL_DEVICE_6030,
+ .rx_with_siso_diversity = true,
};
/*
* "i": Internal configuration, use internal Power Amplifier
*/
+#define IWL_DEVICE_6000i \
+ .fw_name_pre = IWL6000_FW_PRE, \
+ .ucode_api_max = IWL6000_UCODE_API_MAX, \
+ .ucode_api_min = IWL6000_UCODE_API_MIN, \
+ .valid_tx_ant = ANT_BC, /* .cfg overwrite */ \
+ .valid_rx_ant = ANT_BC, /* .cfg overwrite */ \
+ .eeprom_ver = EEPROM_6000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
+ .ops = &iwl6000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl6000_base_params, \
+ .pa_type = IWL_PA_INTERNAL, \
+ .led_mode = IWL_LED_BLINK
+
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .valid_tx_ant = ANT_BC, /* .cfg overwrite */
- .valid_rx_ant = ANT_BC, /* .cfg overwrite */
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
+ IWL_DEVICE_6000i,
.ht_params = &iwl6000_ht_params,
- .pa_type = IWL_PA_INTERNAL,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .valid_tx_ant = ANT_BC, /* .cfg overwrite */
- .valid_rx_ant = ANT_BC, /* .cfg overwrite */
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
- .pa_type = IWL_PA_INTERNAL,
- .led_mode = IWL_LED_BLINK,
+ IWL_DEVICE_6000i,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .valid_tx_ant = ANT_BC, /* .cfg overwrite */
- .valid_rx_ant = ANT_BC, /* .cfg overwrite */
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
- .pa_type = IWL_PA_INTERNAL,
- .led_mode = IWL_LED_BLINK,
-};
+ IWL_DEVICE_6000i,
+};
+
+#define IWL_DEVICE_6050 \
+ .fw_name_pre = IWL6050_FW_PRE, \
+ .ucode_api_max = IWL6050_UCODE_API_MAX, \
+ .ucode_api_min = IWL6050_UCODE_API_MIN, \
+ .ops = &iwl6050_ops, \
+ .eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl6050_base_params, \
+ .need_dc_calib = true, \
+ .led_mode = IWL_LED_BLINK, \
+ .internal_wimax_coex = true
struct iwl_cfg iwl6050_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
- .fw_name_pre = IWL6050_FW_PRE,
- .ucode_api_max = IWL6050_UCODE_API_MAX,
- .ucode_api_min = IWL6050_UCODE_API_MIN,
- .ops = &iwl6050_ops,
- .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6050_base_params,
+ IWL_DEVICE_6050,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_BLINK,
+};
+
+struct iwl_cfg iwl6050_2abg_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
+ IWL_DEVICE_6050,
};
struct iwl_cfg iwl6150_bgn_cfg = {
@@ -802,21 +719,7 @@ struct iwl_cfg iwl6150_bgn_cfg = {
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
-};
-
-struct iwl_cfg iwl6050_2abg_cfg = {
- .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
- .fw_name_pre = IWL6050_FW_PRE,
- .ucode_api_max = IWL6050_UCODE_API_MAX,
- .ucode_api_min = IWL6050_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
- .ops = &iwl6050_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6050_base_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_BLINK,
+ .internal_wimax_coex = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
@@ -834,45 +737,6 @@ struct iwl_cfg iwl6000_3agn_cfg = {
.led_mode = IWL_LED_BLINK,
};
-struct iwl_cfg iwl130_bgn_cfg = {
- .name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_coex_base_params,
- .bt_params = &iwl6000_bt_params,
- .ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
-};
-
-struct iwl_cfg iwl130_bg_cfg = {
- .name = "Intel(R) Centrino(R) Wireless-N 130 BG",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_coex_base_params,
- .bt_params = &iwl6000_bt_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
-};
-
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
index a358d4334a1a..a6dbd8983dac 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
@@ -856,6 +856,9 @@ ssize_t iwl_ucode_bt_stats_read(struct file *file,
if (!iwl_is_alive(priv))
return -EAGAIN;
+ if (!priv->bt_enable_flag)
+ return -EINVAL;
+
/* make request to uCode to retrieve statistics information */
mutex_lock(&priv->mutex);
ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
index cf9194baadac..97906dd442e6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
@@ -75,109 +75,6 @@
#include "iwl-agn.h"
#include "iwl-io.h"
-/************************** EEPROM BANDS ****************************
- *
- * The iwl_eeprom_band definitions below provide the mapping from the
- * EEPROM contents to the specific channel number supported for each
- * band.
- *
- * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
- * definition below maps to physical channel 42 in the 5.2GHz spectrum.
- * The specific geography and calibration information for that channel
- * is contained in the eeprom map itself.
- *
- * During init, we copy the eeprom information and channel map
- * information into priv->channel_info_24/52 and priv->channel_map_24/52
- *
- * channel_map_24/52 provides the index in the channel_info array for a
- * given channel. We have to have two separate maps as there is channel
- * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
- * band_2
- *
- * A value of 0xff stored in the channel_map indicates that the channel
- * is not supported by the hardware at all.
- *
- * A value of 0xfe in the channel_map indicates that the channel is not
- * valid for Tx with the current hardware. This means that
- * while the system can tune and receive on a given channel, it may not
- * be able to associate or transmit any frames on that
- * channel. There is no corresponding channel information for that
- * entry.
- *
- *********************************************************************/
-
-/**
- * struct iwl_txpwr_section: eeprom section information
- * @offset: indirect address into eeprom image
- * @count: number of "struct iwl_eeprom_enhanced_txpwr" in this section
- * @band: band type for the section
- * @is_common - true: common section, false: channel section
- * @is_cck - true: cck section, false: not cck section
- * @is_ht_40 - true: all channel in the section are HT40 channel,
- * false: legacy or HT 20 MHz
- * ignore if it is common section
- * @iwl_eeprom_section_channel: channel array in the section,
- * ignore if common section
- */
-struct iwl_txpwr_section {
- u32 offset;
- u8 count;
- enum ieee80211_band band;
- bool is_common;
- bool is_cck;
- bool is_ht40;
- u8 iwl_eeprom_section_channel[EEPROM_MAX_TXPOWER_SECTION_ELEMENTS];
-};
-
-/**
- * section 1 - 3 are regulatory tx power apply to all channels based on
- * modulation: CCK, OFDM
- * Band: 2.4GHz, 5.2GHz
- * section 4 - 10 are regulatory tx power apply to specified channels
- * For example:
- * 1L - Channel 1 Legacy
- * 1HT - Channel 1 HT
- * (1,+1) - Channel 1 HT40 "_above_"
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1L, 1HT, 2L, 2HT, 10L, 10HT, 11L, 11HT
- * Section 5: 2.4 GHz 40MHz channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1)
- * Section 6: 5.2 GHz 20MHz channels: 36L, 64L, 100L, 36HT, 64HT, 100HT
- * Section 7: 5.2 GHz 40MHz channels: (36,+1) (60,+1) (100,+1)
- * Section 8: 2.4 GHz channel: 13L, 13HT
- * Section 9: 2.4 GHz channel: 140L, 140HT
- * Section 10: 2.4 GHz 40MHz channels: (132,+1) (44,+1)
- *
- */
-static const struct iwl_txpwr_section enhinfo[] = {
- { EEPROM_LB_CCK_20_COMMON, 1, IEEE80211_BAND_2GHZ, true, true, false },
- { EEPROM_LB_OFDM_COMMON, 3, IEEE80211_BAND_2GHZ, true, false, false },
- { EEPROM_HB_OFDM_COMMON, 3, IEEE80211_BAND_5GHZ, true, false, false },
- { EEPROM_LB_OFDM_20_BAND, 8, IEEE80211_BAND_2GHZ,
- false, false, false,
- {1, 1, 2, 2, 10, 10, 11, 11 } },
- { EEPROM_LB_OFDM_HT40_BAND, 5, IEEE80211_BAND_2GHZ,
- false, false, true,
- { 1, 2, 6, 7, 9 } },
- { EEPROM_HB_OFDM_20_BAND, 6, IEEE80211_BAND_5GHZ,
- false, false, false,
- { 36, 64, 100, 36, 64, 100 } },
- { EEPROM_HB_OFDM_HT40_BAND, 3, IEEE80211_BAND_5GHZ,
- false, false, true,
- { 36, 60, 100 } },
- { EEPROM_LB_OFDM_20_CHANNEL_13, 2, IEEE80211_BAND_2GHZ,
- false, false, false,
- { 13, 13 } },
- { EEPROM_HB_OFDM_20_CHANNEL_140, 2, IEEE80211_BAND_5GHZ,
- false, false, false,
- { 140, 140 } },
- { EEPROM_HB_OFDM_HT40_BAND_1, 2, IEEE80211_BAND_5GHZ,
- false, false, true,
- { 132, 44 } },
-};
-
/******************************************************************************
*
* EEPROM related functions
@@ -306,15 +203,6 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
{
s8 max_txpower_avg = 0; /* (dBm) */
- IWL_DEBUG_INFO(priv, "%d - "
- "chain_a: %d dB chain_b: %d dB "
- "chain_c: %d dB mimo2: %d dB mimo3: %d dB\n",
- element,
- enhanced_txpower[element].chain_a_max >> 1,
- enhanced_txpower[element].chain_b_max >> 1,
- enhanced_txpower[element].chain_c_max >> 1,
- enhanced_txpower[element].mimo2_max >> 1,
- enhanced_txpower[element].mimo3_max >> 1);
/* Take the highest tx power from any valid chains */
if ((priv->cfg->valid_tx_ant & ANT_A) &&
(enhanced_txpower[element].chain_a_max > max_txpower_avg))
@@ -344,157 +232,6 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
}
-/**
- * iwl_update_common_txpower: update channel tx power
- * update tx power per band based on EEPROM enhanced tx power info.
- */
-static s8 iwl_update_common_txpower(struct iwl_priv *priv,
- struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
- int section, int element, s8 *max_txpower_in_half_dbm)
-{
- struct iwl_channel_info *ch_info;
- int ch;
- bool is_ht40 = false;
- s8 max_txpower_avg; /* (dBm) */
-
- /* it is common section, contain all type (Legacy, HT and HT40)
- * based on the element in the section to determine
- * is it HT 40 or not
- */
- if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
- is_ht40 = true;
- max_txpower_avg =
- iwl_get_max_txpower_avg(priv, enhanced_txpower,
- element, max_txpower_in_half_dbm);
-
- ch_info = priv->channel_info;
-
- for (ch = 0; ch < priv->channel_count; ch++) {
- /* find matching band and update tx power if needed */
- if ((ch_info->band == enhinfo[section].band) &&
- (ch_info->max_power_avg < max_txpower_avg) &&
- (!is_ht40)) {
- /* Update regulatory-based run-time data */
- ch_info->max_power_avg = ch_info->curr_txpow =
- max_txpower_avg;
- ch_info->scan_power = max_txpower_avg;
- }
- if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
- (ch_info->ht40_max_power_avg < max_txpower_avg)) {
- /* Update regulatory-based run-time data */
- ch_info->ht40_max_power_avg = max_txpower_avg;
- }
- ch_info++;
- }
- return max_txpower_avg;
-}
-
-/**
- * iwl_update_channel_txpower: update channel tx power
- * update channel tx power based on EEPROM enhanced tx power info.
- */
-static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
- struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
- int section, int element, s8 *max_txpower_in_half_dbm)
-{
- struct iwl_channel_info *ch_info;
- int ch;
- u8 channel;
- s8 max_txpower_avg; /* (dBm) */
-
- channel = enhinfo[section].iwl_eeprom_section_channel[element];
- max_txpower_avg =
- iwl_get_max_txpower_avg(priv, enhanced_txpower,
- element, max_txpower_in_half_dbm);
-
- ch_info = priv->channel_info;
- for (ch = 0; ch < priv->channel_count; ch++) {
- /* find matching channel and update tx power if needed */
- if (ch_info->channel == channel) {
- if ((ch_info->max_power_avg < max_txpower_avg) &&
- (!enhinfo[section].is_ht40)) {
- /* Update regulatory-based run-time data */
- ch_info->max_power_avg = max_txpower_avg;
- ch_info->curr_txpow = max_txpower_avg;
- ch_info->scan_power = max_txpower_avg;
- }
- if ((enhinfo[section].is_ht40) &&
- (ch_info->ht40_max_power_avg < max_txpower_avg)) {
- /* Update regulatory-based run-time data */
- ch_info->ht40_max_power_avg = max_txpower_avg;
- }
- break;
- }
- ch_info++;
- }
- return max_txpower_avg;
-}
-
-/**
- * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
- */
-static void iwlcore_eeprom_enhanced_txpower_old(struct iwl_priv *priv)
-{
- int eeprom_section_count = 0;
- int section, element;
- struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
- u32 offset;
- s8 max_txpower_avg; /* (dBm) */
- s8 max_txpower_in_half_dbm; /* (half-dBm) */
-
- /* Loop through all the sections
- * adjust bands and channel's max tx power
- * Set the tx_power_user_lmt to the highest power
- * supported by any channels and chains
- */
- for (section = 0; section < ARRAY_SIZE(enhinfo); section++) {
- eeprom_section_count = enhinfo[section].count;
- offset = enhinfo[section].offset;
- enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *)
- iwl_eeprom_query_addr(priv, offset);
-
- /*
- * check for valid entry -
- * different version of EEPROM might contain different set
- * of enhanced tx power table
- * always check for valid entry before process
- * the information
- */
- if (!(enhanced_txpower->flags || enhanced_txpower->channel) ||
- enhanced_txpower->delta_20_in_40)
- continue;
-
- for (element = 0; element < eeprom_section_count; element++) {
- if (enhinfo[section].is_common)
- max_txpower_avg =
- iwl_update_common_txpower(priv,
- enhanced_txpower, section,
- element,
- &max_txpower_in_half_dbm);
- else
- max_txpower_avg =
- iwl_update_channel_txpower(priv,
- enhanced_txpower, section,
- element,
- &max_txpower_in_half_dbm);
-
- /* Update the tx_power_user_lmt to the highest power
- * supported by any channel */
- if (max_txpower_avg > priv->tx_power_user_lmt)
- priv->tx_power_user_lmt = max_txpower_avg;
-
- /*
- * Update the tx_power_lmt_in_half_dbm to
- * the highest power supported by any channel
- */
- if (max_txpower_in_half_dbm >
- priv->tx_power_lmt_in_half_dbm)
- priv->tx_power_lmt_in_half_dbm =
- max_txpower_in_half_dbm;
- }
- }
-}
-
static void
iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *txp,
@@ -533,7 +270,10 @@ iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
-static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
+#define TXP_CHECK_AND_PRINT(x) ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) \
+ ? # x " " : "")
+
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
{
struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
int idx, entries;
@@ -547,13 +287,39 @@ static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
txp_array = (void *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_OFFS);
+
for (idx = 0; idx < entries; idx++) {
txp = &txp_array[idx];
-
/* skip invalid entries */
if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
continue;
+ IWL_DEBUG_EEPROM(priv, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
+ (txp->channel && (txp->flags &
+ IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
+ "Common " : (txp->channel) ?
+ "Channel" : "Common",
+ (txp->channel),
+ TXP_CHECK_AND_PRINT(VALID),
+ TXP_CHECK_AND_PRINT(BAND_52G),
+ TXP_CHECK_AND_PRINT(OFDM),
+ TXP_CHECK_AND_PRINT(40MHZ),
+ TXP_CHECK_AND_PRINT(HT_AP),
+ TXP_CHECK_AND_PRINT(RES1),
+ TXP_CHECK_AND_PRINT(RES2),
+ TXP_CHECK_AND_PRINT(COMMON_TYPE),
+ txp->flags);
+ IWL_DEBUG_EEPROM(priv, "\t\t chain_A: 0x%02x "
+ "chain_B: 0X%02x chain_C: 0X%02x\n",
+ txp->chain_a_max, txp->chain_b_max,
+ txp->chain_c_max);
+ IWL_DEBUG_EEPROM(priv, "\t\t MIMO2: 0x%02x "
+ "MIMO3: 0x%02x High 20_on_40: 0x%02x "
+ "Low 20_on_40: 0x%02x\n",
+ txp->mimo2_max, txp->mimo3_max,
+ ((txp->delta_20_in_40 & 0xf0) >> 4),
+ (txp->delta_20_in_40 & 0x0f));
+
max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
&max_txp_avg_halfdbm);
@@ -569,11 +335,3 @@ static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
iwlcore_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
}
}
-
-void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
-{
- if (priv->cfg->use_new_eeprom_reading)
- iwlcore_eeprom_enhanced_txpower_new(priv);
- else
- iwlcore_eeprom_enhanced_txpower_old(priv);
-}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 7c8010f7ce56..4bc82fcf1652 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1845,6 +1845,7 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
bt_cmd.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", bt_cmd.flags);
}
+ priv->bt_enable_flag = bt_cmd.flags;
if (priv->bt_full_concurrent)
memcpy(bt_cmd.bt3_lookup_table, iwlagn_concurrent_lookup,
sizeof(iwlagn_concurrent_lookup));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index f450adc72361..ee123482e1d5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -2873,6 +2873,8 @@ void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_i
lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
lq_sta->is_agg = 0;
+ lq_sta->dbg_fixed_rate = 0;
+
rs_initialize_lq(priv, conf, sta, lq_sta);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index 4865b82355d7..769479eb6ea9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -518,7 +518,14 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
mutex_lock(&priv->mutex);
- if (WARN_ON(!ctx->vif)) {
+ if (unlikely(!iwl_is_ready(priv))) {
+ IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
+ if (unlikely(!ctx->vif)) {
+ IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
mutex_unlock(&priv->mutex);
return;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 72b1f262796c..24a11b8f73bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -1237,7 +1237,6 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
int i, sh, ack;
u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
- u64 bitmap, sent_bitmap;
int successes = 0;
struct ieee80211_tx_info *info;
@@ -1278,6 +1277,8 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n",
ba_resp->txed, ba_resp->txed_2_done);
} else {
+ u64 bitmap, sent_bitmap;
+
/* don't use 64-bit values for now */
bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
@@ -1298,7 +1299,11 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
sent_bitmap >>= 1;
++i;
}
+
+ IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n",
+ (unsigned long long)bitmap);
}
+
info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb);
memset(&info->status, 0, sizeof(info->status));
info->flags |= IEEE80211_TX_STAT_ACK;
@@ -1313,8 +1318,6 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
}
iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
- IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n", (unsigned long long)bitmap);
-
return 0;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index d62b92518417..efbde1f1a8bf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -957,6 +957,22 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
/* Cancel currently queued command. */
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+ /* W/A for WiFi/WiMAX coex and WiMAX own the RF */
+ if (priv->cfg->internal_wimax_coex &&
+ (!(iwl_read_prph(priv, APMG_CLK_CTRL_REG) &
+ APMS_CLK_VAL_MRB_FUNC_MODE) ||
+ (iwl_read_prph(priv, APMG_PS_CTRL_REG) &
+ APMG_PS_CTRL_VAL_RESET_REQ))) {
+ wake_up_interruptible(&priv->wait_command_queue);
+ /*
+ *Keep the restart process from trying to send host
+ * commands by clearing the INIT status bit
+ */
+ clear_bit(STATUS_READY, &priv->status);
+ IWL_ERR(priv, "RF is used by WiMAX\n");
+ return;
+ }
+
IWL_ERR(priv, "Loaded firmware version: %s\n",
priv->hw->wiphy->fw_version);
@@ -1207,6 +1223,7 @@ void iwl_send_bt_config(struct iwl_priv *priv)
else
bt_cmd.flags = BT_COEX_ENABLE;
+ priv->bt_enable_flag = bt_cmd.flags;
IWL_DEBUG_INFO(priv, "BT coex %s\n",
(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 9df33d6af8bb..f80685ad2674 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -364,6 +364,8 @@ struct iwl_ht_params {
* @scan_antennas: available antenna for scan operation
* @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
* @adv_pm: advance power management
+ * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
+ * @internal_wimax_coex: internal wifi/wimax combo device
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
@@ -412,7 +414,8 @@ struct iwl_cfg {
u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
enum iwl_led_mode led_mode;
const bool adv_pm;
- const bool use_new_eeprom_reading; /* temporary, remove later */
+ const bool rx_with_siso_diversity;
+ const bool internal_wimax_coex;
};
/***************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 0b961a353ff6..ebdea3be3ef9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -120,6 +120,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
/* 0x000000F0 - 0x00000010 */
#define IWL_DL_MACDUMP (1 << 4)
#define IWL_DL_HCMD_DUMP (1 << 5)
+#define IWL_DL_EEPROM (1 << 6)
#define IWL_DL_RADIO (1 << 7)
/* 0x00000F00 - 0x00000100 */
#define IWL_DL_POWER (1 << 8)
@@ -164,6 +165,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
#define IWL_DEBUG_WEP(p, f, a...) IWL_DEBUG(p, IWL_DL_WEP, f, ## a)
#define IWL_DEBUG_HC(p, f, a...) IWL_DEBUG(p, IWL_DL_HCMD, f, ## a)
#define IWL_DEBUG_HC_DUMP(p, f, a...) IWL_DEBUG(p, IWL_DL_HCMD_DUMP, f, ## a)
+#define IWL_DEBUG_EEPROM(p, f, a...) IWL_DEBUG(p, IWL_DL_EEPROM, f, ## a)
#define IWL_DEBUG_CALIB(p, f, a...) IWL_DEBUG(p, IWL_DL_CALIB, f, ## a)
#define IWL_DEBUG_FW(p, f, a...) IWL_DEBUG(p, IWL_DL_FW, f, ## a)
#define IWL_DEBUG_RF_KILL(p, f, a...) IWL_DEBUG(p, IWL_DL_RF_KILL, f, ## a)
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index d36836376e6b..6fe80b5e7a15 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1567,6 +1567,13 @@ static ssize_t iwl_dbgfs_bt_traffic_read(struct file *file,
const size_t bufsz = sizeof(buf);
ssize_t ret;
+ if (!priv->bt_enable_flag) {
+ pos += scnprintf(buf + pos, bufsz - pos, "BT coex disabled\n");
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ return ret;
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "BT enable flag: 0x%x\n",
+ priv->bt_enable_flag);
pos += scnprintf(buf + pos, bufsz - pos, "BT in %s mode\n",
priv->bt_full_concurrent ? "full concurrency" : "3-wire");
pos += scnprintf(buf + pos, bufsz - pos, "BT status: %s, "
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 836f1816b110..8dda67850af4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1468,6 +1468,7 @@ struct iwl_priv {
};
/* bt coex */
+ u8 bt_enable_flag;
u8 bt_status;
u8 bt_traffic_load, last_bt_traffic_load;
bool bt_ch_announce;
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 87cd10ff285d..358cfd7e5af1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -147,7 +147,7 @@ static int iwl_eeprom_verify_signature(struct iwl_priv *priv)
u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
int ret = 0;
- IWL_DEBUG_INFO(priv, "EEPROM signature=0x%08x\n", gp);
+ IWL_DEBUG_EEPROM(priv, "EEPROM signature=0x%08x\n", gp);
switch (gp) {
case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
if (priv->nvm_device_type != NVM_DEVICE_TYPE_OTP) {
@@ -354,7 +354,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
*/
valid_addr = next_link_addr;
next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
- IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
+ IWL_DEBUG_EEPROM(priv, "OTP blocks %d addr 0x%x\n",
usedblocks, next_link_addr);
if (iwl_read_otp_word(priv, next_link_addr, &link_value))
return -EINVAL;
@@ -374,7 +374,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
} while (usedblocks <= priv->cfg->base_params->max_ll_items);
/* OTP has no valid blocks */
- IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
+ IWL_DEBUG_EEPROM(priv, "OTP has no valid blocks\n");
return -EINVAL;
}
@@ -414,7 +414,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
return -ENOENT;
/* allocate eeprom */
sz = priv->cfg->base_params->eeprom_size;
- IWL_DEBUG_INFO(priv, "NVM size = %d\n", sz);
+ IWL_DEBUG_EEPROM(priv, "NVM size = %d\n", sz);
priv->eeprom = kzalloc(sz, GFP_KERNEL);
if (!priv->eeprom) {
ret = -ENOMEM;
@@ -492,7 +492,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
}
}
- IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
+ IWL_DEBUG_EEPROM(priv, "NVM Type: %s, version: 0x%x\n",
(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
? "OTP" : "EEPROM",
iwl_eeprom_query16(priv, EEPROM_VERSION));
@@ -594,7 +594,7 @@ static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
if (!is_channel_valid(ch_info))
return -1;
- IWL_DEBUG_INFO(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
+ IWL_DEBUG_EEPROM(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
" Ad-Hoc %ssupported\n",
ch_info->channel,
is_channel_a_band(ch_info) ?
@@ -634,11 +634,11 @@ int iwl_init_channel_map(struct iwl_priv *priv)
struct iwl_channel_info *ch_info;
if (priv->channel_count) {
- IWL_DEBUG_INFO(priv, "Channel map already initialized.\n");
+ IWL_DEBUG_EEPROM(priv, "Channel map already initialized.\n");
return 0;
}
- IWL_DEBUG_INFO(priv, "Initializing regulatory info from EEPROM\n");
+ IWL_DEBUG_EEPROM(priv, "Initializing regulatory info from EEPROM\n");
priv->channel_count =
ARRAY_SIZE(iwl_eeprom_band_1) +
@@ -647,7 +647,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
ARRAY_SIZE(iwl_eeprom_band_4) +
ARRAY_SIZE(iwl_eeprom_band_5);
- IWL_DEBUG_INFO(priv, "Parsing data for %d channels.\n", priv->channel_count);
+ IWL_DEBUG_EEPROM(priv, "Parsing data for %d channels.\n",
+ priv->channel_count);
priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
priv->channel_count, GFP_KERNEL);
@@ -686,7 +687,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
IEEE80211_CHAN_NO_HT40;
if (!(is_channel_valid(ch_info))) {
- IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
+ IWL_DEBUG_EEPROM(priv,
+ "Ch. %d Flags %x [%sGHz] - "
"No traffic\n",
ch_info->channel,
ch_info->flags,
@@ -702,7 +704,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
ch_info->min_power = 0;
- IWL_DEBUG_INFO(priv, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
+ IWL_DEBUG_EEPROM(priv, "Ch. %d [%sGHz] "
+ "%s%s%s%s%s%s(0x%02x %ddBm):"
" Ad-Hoc %ssupported\n",
ch_info->channel,
is_channel_a_band(ch_info) ?
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 8994b5b23593..9e6f31355eee 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -231,59 +231,6 @@ struct iwl_eeprom_enhanced_txpwr {
#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */
-/* 6000 and up regulatory tx power - indirect access */
-/* max. elements per section */
-#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8)
-#define EEPROM_TXPOWER_COMMON_HT40_INDEX (2)
-
-/**
- * Partition the enhanced tx power portion of eeprom image into
- * 10 sections based on band, modulation, frequency and channel
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT
- * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_)
- * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT
- * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_)
- * Section 8: 2.4 GHz channel 13, Both Legacy and HT
- * Section 9: 2.4 GHz channel 140, Both Legacy and HT
- * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
- */
-/* 2.4 GHz band: CCK */
-#define EEPROM_LB_CCK_20_COMMON ((0xA8)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */
-/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_LB_OFDM_COMMON ((0xB0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_HB_OFDM_COMMON ((0xC8)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 2.4GHz band channels:
- * 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
-#define EEPROM_LB_OFDM_20_BAND ((0xE0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */
-/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
-#define EEPROM_LB_OFDM_HT40_BAND ((0x120)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */
-/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
-#define EEPROM_HB_OFDM_20_BAND ((0x148)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */
-/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND ((0x178)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 2.4 GHz band, channnel 13: Legacy, HT */
-#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x190)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-/* 5.2 GHz band, channnel 140: Legacy, HT */
-#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-
-
/* 5050 Specific */
#define EEPROM_5050_TX_POWER_VERSION (4)
#define EEPROM_5050_EEPROM_VERSION (0x21E)
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 5469655646ae..86f5123bccda 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -83,10 +83,10 @@
#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058)
#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C)
+#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001)
#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
-
#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000)
#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-19 16:43:09 +0000