diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00usb.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00usb.h | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h new file mode 100644 index 000000000000..2681abe4d49e --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -0,0 +1,180 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00usb + Abstract: Data structures for the rt2x00usb module. + */ + +#ifndef RT2X00USB_H +#define RT2X00USB_H + +/* + * This variable should be used with the + * usb_driver structure initialization. + */ +#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) + +/* + * Register defines. + * Some registers require multiple attempts before success, + * in those cases REGISTER_BUSY_COUNT attempts should be + * taken with a REGISTER_BUSY_DELAY interval. + * For USB vendor requests we need to pass a timeout + * time in ms, for this we use the REGISTER_TIMEOUT, + * however when loading firmware a higher value is + * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE. + */ +#define REGISTER_BUSY_COUNT 5 +#define REGISTER_BUSY_DELAY 100 +#define REGISTER_TIMEOUT 500 +#define REGISTER_TIMEOUT_FIRMWARE 1000 + +/* + * Cache size + */ +#define CSR_CACHE_SIZE 8 +#define CSR_CACHE_SIZE_FIRMWARE 64 + +/* + * USB request types. + */ +#define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE ) +#define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST ) +#define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST ) + +/* + * USB vendor commands. + */ +#define USB_DEVICE_MODE 0x01 +#define USB_SINGLE_WRITE 0x02 +#define USB_SINGLE_READ 0x03 +#define USB_MULTI_WRITE 0x06 +#define USB_MULTI_READ 0x07 +#define USB_EEPROM_WRITE 0x08 +#define USB_EEPROM_READ 0x09 +#define USB_LED_CONTROL 0x0a /* RT73USB */ +#define USB_RX_CONTROL 0x0c + +/* + * Device modes offset + */ +#define USB_MODE_RESET 0x01 +#define USB_MODE_UNPLUG 0x02 +#define USB_MODE_FUNCTION 0x03 +#define USB_MODE_TEST 0x04 +#define USB_MODE_SLEEP 0x07 /* RT73USB */ +#define USB_MODE_FIRMWARE 0x08 /* RT73USB */ +#define USB_MODE_WAKEUP 0x09 /* RT73USB */ + +/* + * Used to read/write from/to the device. + * This is the main function to communicate with the device, + * the buffer argument _must_ either be NULL or point to + * a buffer allocated by kmalloc. Failure to do so can lead + * to unexpected behavior depending on the architecture. + */ +int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, const u16 value, + void *buffer, const u16 buffer_length, + const int timeout); + +/* + * Used to read/write from/to the device. + * This function will use a previously with kmalloc allocated cache + * to communicate with the device. The contents of the buffer pointer + * will be copied to this cache when writing, or read from the cache + * when reading. + * Buffers send to rt2x00usb_vendor_request _must_ be allocated with + * kmalloc. Hence the reason for using a previously allocated cache + * which has been allocated properly. + */ +int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, const int timeout); + +/* + * Simple wrapper around rt2x00usb_vendor_request to write a single + * command to the device. Since we don't use the buffer argument we + * don't have to worry about kmalloc here. + */ +static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev + *rt2x00dev, + const u8 request, + const u16 offset, + const u16 value, + const int timeout) +{ + return rt2x00usb_vendor_request(rt2x00dev, request, + USB_VENDOR_REQUEST_OUT, offset, + value, NULL, 0, timeout); +} + +/* + * Simple wrapper around rt2x00usb_vendor_request to read the eeprom + * from the device. Note that the eeprom argument _must_ be allocated using + * kmalloc for correct handling inside the kernel USB layer. + */ +static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev, + __le16 *eeprom, const u16 lenght) +{ + int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); + + return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, + USB_VENDOR_REQUEST_IN, 0x0000, + 0x0000, eeprom, lenght, timeout); +} + +/* + * Radio handlers + */ +void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev); +void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); + +/* + * TX data handlers. + */ +int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring, struct sk_buff *skb, + struct ieee80211_tx_control *control); + +/* + * Device initialization handlers. + */ +int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); +void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); + +/* + * USB driver handlers. + */ +int rt2x00usb_probe(struct usb_interface *usb_intf, + const struct usb_device_id *id); +void rt2x00usb_disconnect(struct usb_interface *usb_intf); +#ifdef CONFIG_PM +int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state); +int rt2x00usb_resume(struct usb_interface *usb_intf); +#else +#define rt2x00usb_suspend NULL +#define rt2x00usb_resume NULL +#endif /* CONFIG_PM */ + +#endif /* RT2X00USB_H */ |