diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl3945-base.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl3945-base.c | 272 |
1 files changed, 159 insertions, 113 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 3344841b7662..69fda64c6503 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -519,7 +519,7 @@ static inline int iwl3945_is_ready_rf(struct iwl3945_priv *priv) /*************** HOST COMMAND QUEUE FUNCTIONS *****/ -#define IWL_CMD(x) case x : return #x +#define IWL_CMD(x) case x: return #x static const char *get_cmd_string(u8 cmd) { @@ -1425,9 +1425,9 @@ static u8 iwl3945_rate_get_lowest_plcp(struct iwl3945_priv *priv) /* Set rate mask*/ if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) - rate_mask = priv->active_rate_basic & 0xF; + rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK; else - rate_mask = priv->active_rate_basic & 0xFF0; + rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK; for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; i = iwl3945_rates[i].next_ieee) { @@ -4320,7 +4320,7 @@ static void iwl3945_irq_tasklet(struct iwl3945_priv *priv) IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR, "RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio":"enable radio"); + hw_rf_kill ? "disable radio" : "enable radio"); /* Queue restart only if RF_KILL switch was set to "kill" * when we loaded driver, and is now set to "enable". @@ -5996,24 +5996,6 @@ static void iwl3945_bg_rf_kill(struct work_struct *work) iwl3945_rfkill_set_hw_state(priv); } -static void iwl3945_bg_set_monitor(struct work_struct *work) -{ - struct iwl3945_priv *priv = container_of(work, - struct iwl3945_priv, set_monitor); - - IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n"); - - mutex_lock(&priv->mutex); - - if (!iwl3945_is_ready(priv)) - IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n"); - else - if (iwl3945_set_mode(priv, NL80211_IFTYPE_MONITOR) != 0) - IWL_ERROR("iwl3945_set_mode() failed\n"); - - mutex_unlock(&priv->mutex); -} - #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ) static void iwl3945_bg_scan_check(struct work_struct *data) @@ -6339,10 +6321,7 @@ static void iwl3945_post_associate(struct iwl3945_priv *priv) case NL80211_IFTYPE_ADHOC: - /* clear out the station table */ - iwl3945_clear_stations_table(priv); - - iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0); + priv->assoc_id = 1; iwl3945_add_station(priv, priv->bssid, 0, 0); iwl3945_sync_sta(priv, IWL_STA_ID, (priv->band == IEEE80211_BAND_5GHZ) ? @@ -6830,16 +6809,43 @@ static void iwl3945_configure_filter(struct ieee80211_hw *hw, int mc_count, struct dev_addr_list *mc_list) { struct iwl3945_priv *priv = hw->priv; + __le32 *filter_flags = &priv->staging_rxon.filter_flags; + + IWL_DEBUG_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", + changed_flags, *total_flags); - if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { - IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", - NL80211_IFTYPE_MONITOR, - changed_flags, *total_flags); - /* queue work 'cuz mac80211 is holding a lock which - * prevents us from issuing (synchronous) f/w cmds */ - queue_work(priv->workqueue, &priv->set_monitor); + if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) { + if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) + *filter_flags |= RXON_FILTER_PROMISC_MSK; + else + *filter_flags &= ~RXON_FILTER_PROMISC_MSK; + } + if (changed_flags & FIF_ALLMULTI) { + if (*total_flags & FIF_ALLMULTI) + *filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK; + else + *filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK; } - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | + if (changed_flags & FIF_CONTROL) { + if (*total_flags & FIF_CONTROL) + *filter_flags |= RXON_FILTER_CTL2HOST_MSK; + else + *filter_flags &= ~RXON_FILTER_CTL2HOST_MSK; + } + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + *filter_flags |= RXON_FILTER_BCON_AWARE_MSK; + else + *filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK; + } + + /* We avoid iwl_commit_rxon here to commit the new filter flags + * since mac80211 will call ieee80211_hw_config immediately. + * (mc_list is not supported at this time). Otherwise, we need to + * queue a background iwl_commit_rxon work. + */ + + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; } @@ -7715,7 +7721,6 @@ static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv) INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan); INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill); INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update); - INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor); INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start); INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start); INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check); @@ -7787,6 +7792,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e struct iwl_3945_cfg *cfg = (struct iwl_3945_cfg *)(ent->driver_data); unsigned long flags; + /*********************** + * 1. Allocating HW data + * ********************/ + /* Disabling hardware scan means that mac80211 will perform scans * "the hard way", rather than using device's scan. */ if (iwl3945_param_disable_hw_scan) { @@ -7810,27 +7819,24 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e err = -ENOMEM; goto out; } - SET_IEEE80211_DEV(hw, &pdev->dev); - hw->rate_control_algorithm = "iwl-3945-rs"; - hw->sta_data_size = sizeof(struct iwl3945_sta_priv); + SET_IEEE80211_DEV(hw, &pdev->dev); - IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); priv = hw->priv; priv->hw = hw; - priv->pci_dev = pdev; priv->cfg = cfg; + IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); + hw->rate_control_algorithm = "iwl-3945-rs"; + hw->sta_data_size = sizeof(struct iwl3945_sta_priv); + /* Select antenna (may be helpful if only one antenna is connected) */ priv->antenna = (enum iwl3945_antenna)iwl3945_param_antenna; #ifdef CONFIG_IWL3945_DEBUG iwl3945_debug_level = iwl3945_param_debug; atomic_set(&priv->restrict_refcnt, 0); #endif - priv->retry_rate = 1; - - priv->ibss_beacon = NULL; /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | @@ -7841,17 +7847,14 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); + hw->wiphy->fw_handles_regulatory = true; + /* 4 EDCA QOS priorities */ hw->queues = 4; - spin_lock_init(&priv->lock); - spin_lock_init(&priv->power_data.lock); - spin_lock_init(&priv->sta_lock); - spin_lock_init(&priv->hcmd_lock); - - INIT_LIST_HEAD(&priv->free_frames); - - mutex_init(&priv->mutex); + /*************************** + * 2. Initializing PCI bus + * *************************/ if (pci_enable_device(pdev)) { err = -ENODEV; goto out_ieee80211_free_hw; @@ -7859,14 +7862,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_set_master(pdev); - /* Clear the driver's (not device's) station table */ - iwl3945_clear_stations_table(priv); - - priv->data_retry_limit = -1; - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (!err) err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); @@ -7880,10 +7875,9 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e if (err) goto out_pci_disable_device; - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, 0x41, 0x00); - + /*********************** + * 3. Read REV Register + * ********************/ priv->hw_base = pci_iomap(pdev, 0, 0); if (!priv->hw_base) { err = -ENODEV; @@ -7894,25 +7888,70 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e (unsigned long long) pci_resource_len(pdev, 0)); IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); - /* Initialize module parameter values here */ + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_write_config_byte(pdev, 0x41, 0x00); - /* Disable radio (SW RF KILL) via parameter when loading driver */ - if (iwl3945_param_disable) { - set_bit(STATUS_RF_KILL_SW, &priv->status); - IWL_DEBUG_INFO("Radio disabled.\n"); - } + /* nic init */ + iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - priv->iw_mode = NL80211_IFTYPE_STATION; + iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + goto out_remove_sysfs; + } - printk(KERN_INFO DRV_NAME - ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name); + /*********************** + * 4. Read EEPROM + * ********************/ + /* Read the EEPROM */ + err = iwl3945_eeprom_init(priv); + if (err) { + IWL_ERROR("Unable to init EEPROM\n"); + goto out_remove_sysfs; + } + /* MAC Address location in EEPROM same for 3945/4965 */ + get_eeprom_mac(priv, priv->mac_addr); + IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr); + SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); + /*********************** + * 5. Setup HW Constants + * ********************/ /* Device-specific setup */ if (iwl3945_hw_set_hw_setting(priv)) { IWL_ERROR("failed to set hw settings\n"); goto out_iounmap; } + /*********************** + * 6. Setup priv + * ********************/ + priv->retry_rate = 1; + priv->ibss_beacon = NULL; + + spin_lock_init(&priv->lock); + spin_lock_init(&priv->power_data.lock); + spin_lock_init(&priv->sta_lock); + spin_lock_init(&priv->hcmd_lock); + + INIT_LIST_HEAD(&priv->free_frames); + mutex_init(&priv->mutex); + + /* Clear the driver's (not device's) station table */ + iwl3945_clear_stations_table(priv); + + priv->data_retry_limit = -1; + priv->ieee_channels = NULL; + priv->ieee_rates = NULL; + priv->band = IEEE80211_BAND_2GHZ; + + priv->iw_mode = NL80211_IFTYPE_STATION; + if (iwl3945_param_qos_enable) priv->qos_data.qos_enable = 1; @@ -7921,70 +7960,76 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e priv->qos_data.qos_active = 0; priv->qos_data.qos_cap.val = 0; - iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); - iwl3945_setup_deferred_work(priv); - iwl3945_setup_rx_handlers(priv); priv->rates_mask = IWL_RATES_MASK; /* If power management is turned on, default to AC mode */ priv->power_mode = IWL_POWER_AC; priv->user_txpower_limit = IWL_DEFAULT_TX_POWER; - spin_lock_irqsave(&priv->lock, flags); - iwl3945_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group); + err = iwl3945_init_channel_map(priv); if (err) { - IWL_ERROR("failed to create sysfs device attributes\n"); + IWL_ERROR("initializing regulatory failed: %d\n", err); goto out_release_irq; } - /* nic init */ - iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (err < 0) { - IWL_DEBUG_INFO("Failed to init the card\n"); - goto out_remove_sysfs; - } - /* Read the EEPROM */ - err = iwl3945_eeprom_init(priv); + err = iwl3945_init_geos(priv); if (err) { - IWL_ERROR("Unable to init EEPROM\n"); - goto out_remove_sysfs; + IWL_ERROR("initializing geos failed: %d\n", err); + goto out_free_channel_map; } - /* MAC Address location in EEPROM same for 3945/4965 */ - get_eeprom_mac(priv, priv->mac_addr); - IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr); - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - err = iwl3945_init_channel_map(priv); - if (err) { - IWL_ERROR("initializing regulatory failed: %d\n", err); - goto out_remove_sysfs; + printk(KERN_INFO DRV_NAME + ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name); + + /*********************************** + * 7. Initialize Module Parameters + * **********************************/ + + /* Initialize module parameter values here */ + /* Disable radio (SW RF KILL) via parameter when loading driver */ + if (iwl3945_param_disable) { + set_bit(STATUS_RF_KILL_SW, &priv->status); + IWL_DEBUG_INFO("Radio disabled.\n"); } - err = iwl3945_init_geos(priv); + + /*********************** + * 8. Setup Services + * ********************/ + + spin_lock_irqsave(&priv->lock, flags); + iwl3945_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group); if (err) { - IWL_ERROR("initializing geos failed: %d\n", err); - goto out_free_channel_map; + IWL_ERROR("failed to create sysfs device attributes\n"); + goto out_free_geos; } + iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); + iwl3945_setup_deferred_work(priv); + iwl3945_setup_rx_handlers(priv); + + /*********************** + * 9. Conclude + * ********************/ + pci_save_state(pdev); + pci_disable_device(pdev); + + /********************************* + * 10. Setup and Register mac80211 + * *******************************/ + err = ieee80211_register_hw(priv->hw); if (err) { IWL_ERROR("Failed to register network device (error %d)\n", err); - goto out_free_geos; + goto out_remove_sysfs; } priv->hw->conf.beacon_int = 100; priv->mac80211_registered = 1; - pci_save_state(pdev); - pci_disable_device(pdev); + err = iwl3945_rfkill_init(priv); if (err) @@ -7993,12 +8038,13 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e return 0; + out_remove_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); out_free_geos: iwl3945_free_geos(priv); out_free_channel_map: iwl3945_free_channel_map(priv); - out_remove_sysfs: - sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); + out_release_irq: destroy_workqueue(priv->workqueue); |