summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-trans.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-trans.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-trans.h31
1 files changed, 24 insertions, 7 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index a96bd8db6ceb..6dfed1259260 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -77,10 +77,10 @@
/**
* DOC: Transport layer - what is it ?
*
- * The tranport layer is the layer that deals with the HW directly. It provides
+ * The transport layer is the layer that deals with the HW directly. It provides
* an abstraction of the underlying HW to the upper layer. The transport layer
* doesn't provide any policy, algorithm or anything of this kind, but only
- * mechanisms to make the HW do something.It is not completely stateless but
+ * mechanisms to make the HW do something. It is not completely stateless but
* close to it.
* We will have an implementation for each different supported bus.
*/
@@ -111,10 +111,10 @@
/**
* DOC: Host command section
*
- * A host command is a commaned issued by the upper layer to the fw. There are
+ * A host command is a command issued by the upper layer to the fw. There are
* several versions of fw that have several APIs. The transport layer is
* completely agnostic to these differences.
- * The transport does provide helper functionnality (i.e. SYNC / ASYNC mode),
+ * The transport does provide helper functionality (i.e. SYNC / ASYNC mode),
*/
#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
@@ -195,7 +195,7 @@ static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
* @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
* the response. The caller needs to call iwl_free_resp when done.
* @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
- * command queue, but after other high priority commands. valid only
+ * command queue, but after other high priority commands. Valid only
* with CMD_ASYNC.
* @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
* @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
@@ -458,6 +458,8 @@ struct iwl_trans_txq_scd_cfg {
* @txq_disable: de-configure a Tx queue to send AMPDUs
* Must be atomic
* @wait_tx_queue_empty: wait until tx queues are empty. May sleep.
+ * @freeze_txq_timer: prevents the timer of the queue from firing until the
+ * queue is set to awake. Must be atomic.
* @dbgfs_register: add the dbgfs files under this directory. Files will be
* automatically deleted.
* @write8: write a u8 to a register at offset ofs from the BAR
@@ -517,6 +519,8 @@ struct iwl_trans_ops {
int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir);
int (*wait_tx_queue_empty)(struct iwl_trans *trans, u32 txq_bm);
+ void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs,
+ bool freeze);
void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
@@ -578,7 +582,7 @@ enum iwl_d0i3_mode {
* @cfg - pointer to the configuration
* @status: a bit-mask of transport status flags
* @dev - pointer to struct device * that represents the device
- * @hw_id: a u32 with the ID of the device / subdevice.
+ * @hw_id: a u32 with the ID of the device / sub-device.
* Set during transport allocation.
* @hw_id_str: a string with info about HW ID. Set during transport allocation.
* @pm_support: set to true in start_hw if link pm is supported
@@ -595,6 +599,7 @@ enum iwl_d0i3_mode {
* @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
* @dbg_dest_tlv: points to the destination TLV for debug
* @dbg_conf_tlv: array of pointers to configuration TLVs for debug
+ * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug
* @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
*/
struct iwl_trans {
@@ -628,7 +633,8 @@ struct iwl_trans {
u64 dflt_pwr_limit;
const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv;
- const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_MAX];
+ const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX];
+ struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv;
u8 dbg_dest_reg_num;
enum iwl_d0i3_mode d0i3_mode;
@@ -871,6 +877,17 @@ void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
}
+static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans,
+ unsigned long txqs,
+ bool freeze)
+{
+ if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
+ IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
+
+ if (trans->ops->freeze_txq_timer)
+ trans->ops->freeze_txq_timer(trans, txqs, freeze);
+}
+
static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans,
u32 txqs)
{