summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-eeprom.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-eeprom.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-eeprom.h91
1 files changed, 32 insertions, 59 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index d9b590625ae4..9e6f31355eee 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -110,9 +110,18 @@ enum {
};
/* SKU Capabilities */
+/* 3945 only */
#define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0)
#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1)
+/* 5000 and up */
+#define EEPROM_SKU_CAP_BAND_POS (4)
+#define EEPROM_SKU_CAP_BAND_SELECTION \
+ (3 << EEPROM_SKU_CAP_BAND_POS)
+#define EEPROM_SKU_CAP_11N_ENABLE (1 << 6)
+#define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7)
+#define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8)
+
/* *regulatory* channel data format in eeprom, one for each channel.
* There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */
struct iwl_eeprom_channel {
@@ -120,6 +129,17 @@ struct iwl_eeprom_channel {
s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
} __packed;
+enum iwl_eeprom_enhanced_txpwr_flags {
+ IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0),
+ IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1),
+ IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2),
+ IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3),
+ IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4),
+ IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5),
+ IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6),
+ IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7),
+};
+
/**
* iwl_eeprom_enhanced_txpwr structure
* This structure presents the enhanced regulatory tx power limit layout
@@ -127,21 +147,23 @@ struct iwl_eeprom_channel {
* Enhanced regulatory tx power portion of eeprom image can be broken down
* into individual structures; each one is 8 bytes in size and contain the
* following information
- * @common: (desc + channel) not used by driver, should _NOT_ be "zero"
+ * @flags: entry flags
+ * @channel: channel number
* @chain_a_max_pwr: chain a max power in 1/2 dBm
* @chain_b_max_pwr: chain b max power in 1/2 dBm
* @chain_c_max_pwr: chain c max power in 1/2 dBm
- * @reserved: not used, should be "zero"
+ * @delta_20_in_40: 20-in-40 deltas (hi/lo)
* @mimo2_max_pwr: mimo2 max power in 1/2 dBm
* @mimo3_max_pwr: mimo3 max power in 1/2 dBm
*
*/
struct iwl_eeprom_enhanced_txpwr {
- __le16 common;
+ u8 flags;
+ u8 channel;
s8 chain_a_max;
s8 chain_b_max;
s8 chain_c_max;
- s8 reserved;
+ u8 delta_20_in_40;
s8 mimo2_max;
s8 mimo3_max;
} __packed;
@@ -186,6 +208,8 @@ struct iwl_eeprom_enhanced_txpwr {
#define EEPROM_LINK_CALIBRATION (2*0x67)
#define EEPROM_LINK_PROCESS_ADJST (2*0x68)
#define EEPROM_LINK_OTHERS (2*0x69)
+#define EEPROM_LINK_TXP_LIMIT (2*0x6a)
+#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b)
/* agn regulatory - indirect access */
#define EEPROM_REG_BAND_1_CHANNELS ((0x08)\
@@ -207,59 +231,6 @@ struct iwl_eeprom_enhanced_txpwr {
#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */
-/* 6000 and up regulatory tx power - indirect access */
-/* max. elements per section */
-#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8)
-#define EEPROM_TXPOWER_COMMON_HT40_INDEX (2)
-
-/**
- * Partition the enhanced tx power portion of eeprom image into
- * 10 sections based on band, modulation, frequency and channel
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT
- * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_)
- * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT
- * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_)
- * Section 8: 2.4 GHz channel 13, Both Legacy and HT
- * Section 9: 2.4 GHz channel 140, Both Legacy and HT
- * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
- */
-/* 2.4 GHz band: CCK */
-#define EEPROM_LB_CCK_20_COMMON ((0xA8)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */
-/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_LB_OFDM_COMMON ((0xB0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_HB_OFDM_COMMON ((0xC8)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 2.4GHz band channels:
- * 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
-#define EEPROM_LB_OFDM_20_BAND ((0xE0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */
-/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
-#define EEPROM_LB_OFDM_HT40_BAND ((0x120)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */
-/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
-#define EEPROM_HB_OFDM_20_BAND ((0x148)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */
-/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND ((0x178)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 2.4 GHz band, channnel 13: Legacy, HT */
-#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x190)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-/* 5.2 GHz band, channnel 140: Legacy, HT */
-#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-
-
/* 5050 Specific */
#define EEPROM_5050_TX_POWER_VERSION (4)
#define EEPROM_5050_EEPROM_VERSION (0x21E)
@@ -389,6 +360,8 @@ struct iwl_eeprom_calib_info {
#define INDIRECT_CALIBRATION 0x00040000
#define INDIRECT_PROCESS_ADJST 0x00050000
#define INDIRECT_OTHERS 0x00060000
+#define INDIRECT_TXP_LIMIT 0x00070000
+#define INDIRECT_TXP_LIMIT_SIZE 0x00080000
#define INDIRECT_ADDRESS 0x00100000
/* General */
@@ -397,11 +370,10 @@ struct iwl_eeprom_calib_info {
#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
#define EEPROM_VERSION (2*0x44) /* 2 bytes */
-#define EEPROM_SKU_CAP (2*0x45) /* 1 bytes */
+#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
#define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */
#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
-#define EEPROM_3945_M_VERSION (2*0x4A) /* 1 bytes */
#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
/* The following masks are to be applied on EEPROM_RADIO_CONFIG */
@@ -504,6 +476,7 @@ struct iwl_eeprom_ops {
int iwl_eeprom_init(struct iwl_priv *priv);
void iwl_eeprom_free(struct iwl_priv *priv);
int iwl_eeprom_check_version(struct iwl_priv *priv);
+int iwl_eeprom_check_sku(struct iwl_priv *priv);
const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset);
int iwlcore_eeprom_verify_signature(struct iwl_priv *priv);
u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset);