diff options
Diffstat (limited to 'drivers/net/wireless/ath/wil6210/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/wmi.h | 387 |
1 files changed, 367 insertions, 20 deletions
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h index d3e75f0ff245..dc503d903786 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.h +++ b/drivers/net/wireless/ath/wil6210/wmi.h @@ -1,4 +1,5 @@ /* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. * Copyright (c) 2012-2017 Qualcomm Atheros, Inc. * Copyright (c) 2006-2012 Wilocity * @@ -29,8 +30,6 @@ #ifndef __WILOCITY_WMI_H__ #define __WILOCITY_WMI_H__ -/* General */ -#define WMI_MAX_ASSOC_STA (8) #define WMI_DEFAULT_ASSOC_STA (1) #define WMI_MAC_LEN (6) #define WMI_PROX_RANGE_NUM (3) @@ -41,6 +40,19 @@ #define WMI_RF_ETYPE_LENGTH (3) #define WMI_RF_RX2TX_LENGTH (3) #define WMI_RF_ETYPE_VAL_PER_RANGE (5) +/* DTYPE configuration array size + * must always be kept equal to (WMI_RF_DTYPE_LENGTH+1) + */ +#define WMI_RF_DTYPE_CONF_LENGTH (4) +/* ETYPE configuration array size + * must always be kept equal to + * (WMI_RF_ETYPE_LENGTH+WMI_RF_ETYPE_VAL_PER_RANGE) + */ +#define WMI_RF_ETYPE_CONF_LENGTH (8) +/* RX2TX configuration array size + * must always be kept equal to (WMI_RF_RX2TX_LENGTH+1) + */ +#define WMI_RF_RX2TX_CONF_LENGTH (4) /* Mailbox interface * used for commands and events @@ -61,7 +73,7 @@ enum wmi_fw_capability { WMI_FW_CAPABILITY_PS_CONFIG = 1, WMI_FW_CAPABILITY_RF_SECTORS = 2, WMI_FW_CAPABILITY_MGMT_RETRY_LIMIT = 3, - WMI_FW_CAPABILITY_DISABLE_AP_SME = 4, + WMI_FW_CAPABILITY_AP_SME_OFFLOAD_PARTIAL = 4, WMI_FW_CAPABILITY_WMI_ONLY = 5, WMI_FW_CAPABILITY_THERMAL_THROTTLING = 7, WMI_FW_CAPABILITY_D3_SUSPEND = 8, @@ -73,6 +85,7 @@ enum wmi_fw_capability { WMI_FW_CAPABILITY_LO_POWER_CALIB_FROM_OTP = 14, WMI_FW_CAPABILITY_PNO = 15, WMI_FW_CAPABILITY_REF_CLOCK_CONTROL = 18, + WMI_FW_CAPABILITY_AP_SME_OFFLOAD_NONE = 19, WMI_FW_CAPABILITY_MAX, }; @@ -164,12 +177,14 @@ enum wmi_command_id { WMI_SET_ACTIVE_SILENT_RSSI_TABLE_CMDID = 0x85C, WMI_RF_PWR_ON_DELAY_CMDID = 0x85D, WMI_SET_HIGH_POWER_TABLE_PARAMS_CMDID = 0x85E, + WMI_FIXED_SCHEDULING_UL_CONFIG_CMDID = 0x85F, /* Performance monitoring commands */ WMI_BF_CTRL_CMDID = 0x862, WMI_NOTIFY_REQ_CMDID = 0x863, WMI_GET_STATUS_CMDID = 0x864, WMI_GET_RF_STATUS_CMDID = 0x866, WMI_GET_BASEBAND_TYPE_CMDID = 0x867, + WMI_VRING_SWITCH_TIMING_CONFIG_CMDID = 0x868, WMI_UNIT_TEST_CMDID = 0x900, WMI_FLASH_READ_CMDID = 0x902, WMI_FLASH_WRITE_CMDID = 0x903, @@ -202,6 +217,7 @@ enum wmi_command_id { WMI_GET_THERMAL_THROTTLING_CFG_CMDID = 0x941, /* Read Power Save profile type */ WMI_PS_DEV_PROFILE_CFG_READ_CMDID = 0x942, + WMI_TSF_SYNC_CMDID = 0x973, WMI_TOF_SESSION_START_CMDID = 0x991, WMI_TOF_GET_CAPABILITIES_CMDID = 0x992, WMI_TOF_SET_LCR_CMDID = 0x993, @@ -218,11 +234,16 @@ enum wmi_command_id { WMI_PRIO_TX_SECTORS_ORDER_CMDID = 0x9A5, WMI_PRIO_TX_SECTORS_NUMBER_CMDID = 0x9A6, WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID = 0x9A7, + WMI_BF_CONTROL_CMDID = 0x9AA, WMI_SCHEDULING_SCHEME_CMDID = 0xA01, WMI_FIXED_SCHEDULING_CONFIG_CMDID = 0xA02, WMI_ENABLE_FIXED_SCHEDULING_CMDID = 0xA03, WMI_SET_MULTI_DIRECTED_OMNIS_CONFIG_CMDID = 0xA04, WMI_SET_LONG_RANGE_CONFIG_CMDID = 0xA05, + WMI_GET_ASSOC_LIST_CMDID = 0xA06, + WMI_GET_CCA_INDICATIONS_CMDID = 0xA07, + WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_CMDID = 0xA08, + WMI_INTERNAL_FW_IOCTL_CMDID = 0xA0B, WMI_SET_MAC_ADDRESS_CMDID = 0xF003, WMI_ABORT_SCAN_CMDID = 0xF007, WMI_SET_PROMISCUOUS_MODE_CMDID = 0xF041, @@ -484,6 +505,18 @@ enum wmi_rf_mgmt_type { WMI_RF_MGMT_GET_STATUS = 0x02, }; +/* WMI_BF_CONTROL_CMDID */ +enum wmi_bf_triggers { + WMI_BF_TRIGGER_RS_MCS1_TH_FAILURE = 0x01, + WMI_BF_TRIGGER_RS_MCS1_NO_BACK_FAILURE = 0x02, + WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP = 0x04, + WMI_BF_TRIGGER_MAX_BACK_FAILURE = 0x08, + WMI_BF_TRIGGER_FW = 0x10, + WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_KEEP_ALIVE = 0x20, + WMI_BF_TRIGGER_AOA = 0x40, + WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_UPM = 0x80, +}; + /* WMI_RF_MGMT_CMDID */ struct wmi_rf_mgmt_cmd { __le32 rf_mgmt_type; @@ -519,7 +552,9 @@ struct wmi_bcon_ctrl_cmd { u8 disable_sec; u8 hidden_ssid; u8 is_go; - u8 reserved[2]; + /* A-BFT length override if non-0 */ + u8 abft_len; + u8 reserved; } __packed; /* WMI_PORT_ALLOCATE_CMDID */ @@ -585,6 +620,16 @@ struct wmi_power_mgmt_cfg_cmd { } __packed; /* WMI_PCP_START_CMDID */ +enum wmi_ap_sme_offload_mode { + /* Full AP SME in FW */ + WMI_AP_SME_OFFLOAD_FULL = 0x00, + /* Probe AP SME in FW */ + WMI_AP_SME_OFFLOAD_PARTIAL = 0x01, + /* AP SME in host */ + WMI_AP_SME_OFFLOAD_NONE = 0x02, +}; + +/* WMI_PCP_START_CMDID */ struct wmi_pcp_start_cmd { __le16 bcon_interval; u8 pcp_max_assoc_sta; @@ -593,7 +638,8 @@ struct wmi_pcp_start_cmd { u8 reserved0[5]; /* A-BFT length override if non-0 */ u8 abft_len; - u8 disable_ap_sme; + /* enum wmi_ap_sme_offload_mode_e */ + u8 ap_sme_offload_mode; u8 network_type; u8 channel; u8 disable_sec_offload; @@ -607,6 +653,17 @@ struct wmi_sw_tx_req_cmd { u8 payload[0]; } __packed; +/* WMI_VRING_SWITCH_TIMING_CONFIG_CMDID */ +struct wmi_vring_switch_timing_config_cmd { + /* Set vring timing configuration: + * + * defined interval for vring switch + */ + __le32 interval_usec; + /* vring inactivity threshold */ + __le32 idle_th_usec; +} __packed; + struct wmi_sw_ring_cfg { __le64 ring_mem_base; __le16 ring_size; @@ -642,6 +699,7 @@ enum wmi_vring_cfg_schd_params_priority { WMI_SCH_PRIO_HIGH = 0x01, }; +#define CIDXTID_EXTENDED_CID_TID (0xFF) #define CIDXTID_CID_POS (0) #define CIDXTID_CID_LEN (4) #define CIDXTID_CID_MSK (0xF) @@ -662,6 +720,9 @@ struct wmi_vring_cfg { struct wmi_sw_ring_cfg tx_sw_ring; /* 0-23 vrings */ u8 ringid; + /* Used for cid less than 8. For higher cid set + * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead + */ u8 cidxtid; u8 encap_trans_type; /* 802.3 DS cfg */ @@ -671,6 +732,11 @@ struct wmi_vring_cfg { u8 to_resolution; u8 agg_max_wsize; struct wmi_vring_cfg_schd schd_params; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 cid; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 tid; + u8 reserved[2]; } __packed; enum wmi_vring_cfg_cmd_action { @@ -868,23 +934,42 @@ struct wmi_cfg_rx_chain_cmd { /* WMI_RCP_ADDBA_RESP_CMDID */ struct wmi_rcp_addba_resp_cmd { + /* Used for cid less than 8. For higher cid set + * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead + */ u8 cidxtid; u8 dialog_token; __le16 status_code; /* ieee80211_ba_parameterset field to send */ __le16 ba_param_set; __le16 ba_timeout; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 cid; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 tid; + u8 reserved[2]; } __packed; /* WMI_RCP_DELBA_CMDID */ struct wmi_rcp_delba_cmd { + /* Used for cid less than 8. For higher cid set + * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead + */ u8 cidxtid; u8 reserved; __le16 reason; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 cid; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 tid; + u8 reserved2[2]; } __packed; /* WMI_RCP_ADDBA_REQ_CMDID */ struct wmi_rcp_addba_req_cmd { + /* Used for cid less than 8. For higher cid set + * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead + */ u8 cidxtid; u8 dialog_token; /* ieee80211_ba_parameterset field as it received */ @@ -892,6 +977,11 @@ struct wmi_rcp_addba_req_cmd { __le16 ba_timeout; /* ieee80211_ba_seqstrl field as it received */ __le16 ba_seq_ctrl; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 cid; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 tid; + u8 reserved[2]; } __packed; /* WMI_SET_MAC_ADDRESS_CMDID */ @@ -902,15 +992,20 @@ struct wmi_set_mac_address_cmd { /* WMI_ECHO_CMDID * Check FW is alive - * WMI_DEEP_ECHO_CMDID - * Check FW and ucode are alive * Returned event: WMI_ECHO_RSP_EVENTID - * same event for both commands */ struct wmi_echo_cmd { __le32 value; } __packed; +/* WMI_DEEP_ECHO_CMDID + * Check FW and ucode are alive + * Returned event: WMI_ECHO_RSP_EVENTID + */ +struct wmi_deep_echo_cmd { + __le32 value; +} __packed; + /* WMI_RF_PWR_ON_DELAY_CMDID * set FW time parameters used through RF resetting * RF reset consists of bringing its power down for a period of time, then @@ -928,7 +1023,7 @@ struct wmi_rf_pwr_on_delay_cmd { __le16 up_delay_usec; } __packed; -/* \WMI_SET_HIGH_POWER_TABLE_PARAMS_CMDID +/* WMI_SET_HIGH_POWER_TABLE_PARAMS_CMDID * This API controls the Tx and Rx gain over temperature. * It controls the Tx D-type, Rx D-type and Rx E-type amplifiers. * It also controls the Tx gain index, by controlling the Rx to Tx gain index @@ -942,25 +1037,46 @@ struct wmi_set_high_power_table_params_cmd { u8 tx_dtype_temp[WMI_RF_DTYPE_LENGTH]; u8 reserved0; /* Tx D-type values to be used for each temperature range */ - __le32 tx_dtype_conf[WMI_RF_DTYPE_LENGTH + 1]; + __le32 tx_dtype_conf[WMI_RF_DTYPE_CONF_LENGTH]; + /* Temperature range for Tx E-type parameters */ + u8 tx_etype_temp[WMI_RF_ETYPE_LENGTH]; + u8 reserved1; + /* Tx E-type values to be used for each temperature range. + * The last 4 values of any range are the first 4 values of the next + * range and so on + */ + __le32 tx_etype_conf[WMI_RF_ETYPE_CONF_LENGTH]; /* Temperature range for Rx D-type parameters */ u8 rx_dtype_temp[WMI_RF_DTYPE_LENGTH]; - u8 reserved1; + u8 reserved2; /* Rx D-type values to be used for each temperature range */ - __le32 rx_dtype_conf[WMI_RF_DTYPE_LENGTH + 1]; + __le32 rx_dtype_conf[WMI_RF_DTYPE_CONF_LENGTH]; /* Temperature range for Rx E-type parameters */ u8 rx_etype_temp[WMI_RF_ETYPE_LENGTH]; - u8 reserved2; + u8 reserved3; /* Rx E-type values to be used for each temperature range. * The last 4 values of any range are the first 4 values of the next * range and so on */ - __le32 rx_etype_conf[WMI_RF_ETYPE_VAL_PER_RANGE + WMI_RF_ETYPE_LENGTH]; + __le32 rx_etype_conf[WMI_RF_ETYPE_CONF_LENGTH]; /* Temperature range for rx_2_tx_offs parameters */ u8 rx_2_tx_temp[WMI_RF_RX2TX_LENGTH]; - u8 reserved3; + u8 reserved4; /* Rx to Tx gain index offset */ - s8 rx_2_tx_offs[WMI_RF_RX2TX_LENGTH + 1]; + s8 rx_2_tx_offs[WMI_RF_RX2TX_CONF_LENGTH]; +} __packed; + +/* WMI_FIXED_SCHEDULING_UL_CONFIG_CMDID + * This API sets rd parameter per mcs. + * Relevant only in Fixed Scheduling mode. + * Returned event: WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID + */ +struct wmi_fixed_scheduling_ul_config_cmd { + /* Use mcs -1 to set for every mcs */ + s8 mcs; + /* Number of frames with rd bit set in a single virtual slot */ + u8 rd_count_per_slot; + u8 reserved[2]; } __packed; /* CMD: WMI_RF_XPM_READ_CMDID */ @@ -1267,6 +1383,93 @@ struct wmi_set_long_range_config_complete_event { u8 reserved[3]; } __packed; +/* payload max size is 236 bytes: max event buffer size (256) - WMI headers + * (16) - prev struct field size (4) + */ +#define WMI_MAX_IOCTL_PAYLOAD_SIZE (236) +#define WMI_MAX_IOCTL_REPLY_PAYLOAD_SIZE (236) +#define WMI_MAX_INTERNAL_EVENT_PAYLOAD_SIZE (236) + +enum wmi_internal_fw_ioctl_code { + WMI_INTERNAL_FW_CODE_NONE = 0x0, + WMI_INTERNAL_FW_CODE_QCOM = 0x1, +}; + +/* WMI_INTERNAL_FW_IOCTL_CMDID */ +struct wmi_internal_fw_ioctl_cmd { + /* enum wmi_internal_fw_ioctl_code */ + __le16 code; + __le16 length; + /* payload max size is WMI_MAX_IOCTL_PAYLOAD_SIZE + * Must be the last member of the struct + */ + __le32 payload[0]; +} __packed; + +/* WMI_INTERNAL_FW_IOCTL_EVENTID */ +struct wmi_internal_fw_ioctl_event { + /* wmi_fw_status */ + u8 status; + u8 reserved; + __le16 length; + /* payload max size is WMI_MAX_IOCTL_REPLY_PAYLOAD_SIZE + * Must be the last member of the struct + */ + __le32 payload[0]; +} __packed; + +/* WMI_INTERNAL_FW_EVENT_EVENTID */ +struct wmi_internal_fw_event_event { + __le16 id; + __le16 length; + /* payload max size is WMI_MAX_INTERNAL_EVENT_PAYLOAD_SIZE + * Must be the last member of the struct + */ + __le32 payload[0]; +} __packed; + +/* WMI_BF_CONTROL_CMDID */ +struct wmi_bf_control_cmd { + /* wmi_bf_triggers */ + __le32 triggers; + u8 cid; + /* DISABLED = 0, ENABLED = 1 , DRY_RUN = 2 */ + u8 txss_mode; + /* DISABLED = 0, ENABLED = 1, DRY_RUN = 2 */ + u8 brp_mode; + /* Max cts threshold (correspond to + * WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP) + */ + u8 bf_trigger_max_cts_failure_thr; + /* Max cts threshold in dense (correspond to + * WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP) + */ + u8 bf_trigger_max_cts_failure_dense_thr; + /* Max b-ack threshold (correspond to + * WMI_BF_TRIGGER_MAX_BACK_FAILURE) + */ + u8 bf_trigger_max_back_failure_thr; + /* Max b-ack threshold in dense (correspond to + * WMI_BF_TRIGGER_MAX_BACK_FAILURE) + */ + u8 bf_trigger_max_back_failure_dense_thr; + u8 reserved0; + /* Wrong sectors threshold */ + __le32 wrong_sector_bis_thr; + /* BOOL to enable/disable long term trigger */ + u8 long_term_enable; + /* 1 = Update long term thresholds from the long_term_mbps_th_tbl and + * long_term_trig_timeout_per_mcs arrays, 0 = Ignore + */ + u8 long_term_update_thr; + /* Long term throughput threshold [Mbps] */ + u8 long_term_mbps_th_tbl[WMI_NUM_MCS]; + u8 reserved1; + /* Long term timeout threshold table [msec] */ + __le16 long_term_trig_timeout_per_mcs[WMI_NUM_MCS]; + u8 reserved2[2]; +} __packed; + /* WMI Events * List of Events (target to host) */ @@ -1325,6 +1528,7 @@ enum wmi_event_id { WMI_SET_SILENT_RSSI_TABLE_DONE_EVENTID = 0x185C, WMI_RF_PWR_ON_DELAY_RSP_EVENTID = 0x185D, WMI_SET_HIGH_POWER_TABLE_PARAMS_EVENTID = 0x185E, + WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID = 0x185F, /* Performance monitoring events */ WMI_DATA_PORT_OPEN_EVENTID = 0x1860, WMI_WBE_LINK_DOWN_EVENTID = 0x1861, @@ -1334,6 +1538,7 @@ enum wmi_event_id { WMI_VRING_EN_EVENTID = 0x1865, WMI_GET_RF_STATUS_EVENTID = 0x1866, WMI_GET_BASEBAND_TYPE_EVENTID = 0x1867, + WMI_VRING_SWITCH_TIMING_CONFIG_EVENTID = 0x1868, WMI_UNIT_TEST_EVENTID = 0x1900, WMI_FLASH_READ_DONE_EVENTID = 0x1902, WMI_FLASH_WRITE_DONE_EVENTID = 0x1903, @@ -1363,6 +1568,7 @@ enum wmi_event_id { WMI_GET_THERMAL_THROTTLING_CFG_EVENTID = 0x1941, /* return the Power Save profile */ WMI_PS_DEV_PROFILE_CFG_READ_EVENTID = 0x1942, + WMI_TSF_SYNC_STATUS_EVENTID = 0x1973, WMI_TOF_SESSION_END_EVENTID = 0x1991, WMI_TOF_GET_CAPABILITIES_EVENTID = 0x1992, WMI_TOF_SET_LCR_EVENTID = 0x1993, @@ -1380,17 +1586,24 @@ enum wmi_event_id { WMI_PRIO_TX_SECTORS_ORDER_EVENTID = 0x19A5, WMI_PRIO_TX_SECTORS_NUMBER_EVENTID = 0x19A6, WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID = 0x19A7, + WMI_BF_CONTROL_EVENTID = 0x19AA, WMI_SCHEDULING_SCHEME_EVENTID = 0x1A01, WMI_FIXED_SCHEDULING_CONFIG_COMPLETE_EVENTID = 0x1A02, WMI_ENABLE_FIXED_SCHEDULING_COMPLETE_EVENTID = 0x1A03, WMI_SET_MULTI_DIRECTED_OMNIS_CONFIG_EVENTID = 0x1A04, WMI_SET_LONG_RANGE_CONFIG_COMPLETE_EVENTID = 0x1A05, + WMI_GET_ASSOC_LIST_RES_EVENTID = 0x1A06, + WMI_GET_CCA_INDICATIONS_EVENTID = 0x1A07, + WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_EVENTID = 0x1A08, + WMI_INTERNAL_FW_EVENT_EVENTID = 0x1A0A, + WMI_INTERNAL_FW_IOCTL_EVENTID = 0x1A0B, WMI_SET_CHANNEL_EVENTID = 0x9000, WMI_ASSOC_REQ_EVENTID = 0x9001, WMI_EAPOL_RX_EVENTID = 0x9002, WMI_MAC_ADDR_RESP_EVENTID = 0x9003, WMI_FW_VER_EVENTID = 0x9004, WMI_ACS_PASSIVE_SCAN_COMPLETE_EVENTID = 0x9005, + WMI_INTERNAL_FW_SET_CHANNEL = 0x9006, WMI_COMMAND_NOT_SUPPORTED_EVENTID = 0xFFFF, }; @@ -1462,12 +1675,16 @@ enum rf_type { RF_UNKNOWN = 0x00, RF_MARLON = 0x01, RF_SPARROW = 0x02, + RF_TALYNA1 = 0x03, + RF_TALYNA2 = 0x04, }; /* WMI_GET_RF_STATUS_EVENTID */ enum board_file_rf_type { BF_RF_MARLON = 0x00, BF_RF_SPARROW = 0x01, + BF_RF_TALYNA1 = 0x02, + BF_RF_TALYNA2 = 0x03, }; /* WMI_GET_RF_STATUS_EVENTID */ @@ -1507,6 +1724,7 @@ enum baseband_type { BASEBAND_SPARROW_M_C0 = 0x06, BASEBAND_SPARROW_M_D0 = 0x07, BASEBAND_TALYN_M_A0 = 0x08, + BASEBAND_TALYN_M_B0 = 0x09, }; /* WMI_GET_BASEBAND_TYPE_EVENTID */ @@ -1551,7 +1769,11 @@ struct wmi_ready_event { u8 numof_additional_mids; /* rfc read calibration result. 5..15 */ u8 rfc_read_calib_result; - u8 reserved[3]; + /* Max associated STAs supported by FW in AP mode (default 0 means 8 + * STA) + */ + u8 max_assoc_sta; + u8 reserved[2]; } __packed; /* WMI_NOTIFY_REQ_DONE_EVENTID */ @@ -1666,13 +1888,13 @@ enum wmi_pno_result { }; struct wmi_start_sched_scan_event { - /* pno_result */ + /* wmi_pno_result */ u8 result; u8 reserved[3]; } __packed; struct wmi_stop_sched_scan_event { - /* pno_result */ + /* wmi_pno_result */ u8 result; u8 reserved[3]; } __packed; @@ -1739,9 +1961,17 @@ struct wmi_ba_status_event { /* WMI_DELBA_EVENTID */ struct wmi_delba_event { + /* Used for cid less than 8. For higher cid set + * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead + */ u8 cidxtid; u8 from_initiator; __le16 reason; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 cid; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 tid; + u8 reserved[2]; } __packed; /* WMI_VRING_CFG_DONE_EVENTID */ @@ -1754,13 +1984,24 @@ struct wmi_vring_cfg_done_event { /* WMI_RCP_ADDBA_RESP_SENT_EVENTID */ struct wmi_rcp_addba_resp_sent_event { + /* Used for cid less than 8. For higher cid set + * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead + */ u8 cidxtid; u8 reserved; __le16 status; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 cid; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 tid; + u8 reserved2[2]; } __packed; /* WMI_RCP_ADDBA_REQ_EVENTID */ struct wmi_rcp_addba_req_event { + /* Used for cid less than 8. For higher cid set + * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead + */ u8 cidxtid; u8 dialog_token; /* ieee80211_ba_parameterset as it received */ @@ -1768,6 +2009,11 @@ struct wmi_rcp_addba_req_event { __le16 ba_timeout; /* ieee80211_ba_seqstrl field as it received */ __le16 ba_seq_ctrl; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 cid; + /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */ + u8 tid; + u8 reserved[2]; } __packed; /* WMI_CFG_RX_CHAIN_DONE_EVENTID */ @@ -1942,6 +2188,13 @@ struct wmi_set_high_power_table_params_event { u8 reserved[3]; } __packed; +/* WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID */ +struct wmi_fixed_scheduling_ul_config_event { + /* wmi_fw_status */ + u8 status; + u8 reserved[3]; +} __packed; + /* WMI_TEMP_SENSE_DONE_EVENTID * * Measure MAC and radio temperatures @@ -2290,6 +2543,8 @@ struct wmi_link_maintain_cfg { __le32 bad_beacons_num_threshold; /* SNR limit for bad_beacons_detector */ __le32 bad_beacons_snr_threshold_db; + /* timeout for disassoc response frame in uSec */ + __le32 disconnect_timeout; } __packed; /* WMI_LINK_MAINTAIN_CFG_WRITE_CMDID */ @@ -2519,6 +2774,7 @@ enum wmi_tof_session_end_status { WMI_TOF_SESSION_END_FAIL = 0x01, WMI_TOF_SESSION_END_PARAMS_ERROR = 0x02, WMI_TOF_SESSION_END_ABORTED = 0x03, + WMI_TOF_SESSION_END_BUSY = 0x04, }; /* WMI_TOF_SESSION_END_EVENTID */ @@ -2925,7 +3181,40 @@ struct wmi_set_silent_rssi_table_done_event { __le32 table; } __packed; -/* \WMI_COMMAND_NOT_SUPPORTED_EVENTID */ +/* WMI_VRING_SWITCH_TIMING_CONFIG_EVENTID */ +struct wmi_vring_switch_timing_config_event { + /* enum wmi_fw_status */ + u8 status; + u8 reserved[3]; +} __packed; + +/* WMI_GET_ASSOC_LIST_RES_EVENTID */ +struct wmi_assoc_sta_info { + u8 mac[WMI_MAC_LEN]; + u8 omni_index_address; + u8 reserved; +} __packed; + +#define WMI_GET_ASSOC_LIST_SIZE (8) + +/* WMI_GET_ASSOC_LIST_RES_EVENTID + * Returns up to MAX_ASSOC_STA_LIST_SIZE associated STAs + */ +struct wmi_get_assoc_list_res_event { + struct wmi_assoc_sta_info assoc_sta_list[WMI_GET_ASSOC_LIST_SIZE]; + /* STA count */ + u8 count; + u8 reserved[3]; +} __packed; + +/* WMI_BF_CONTROL_EVENTID */ +struct wmi_bf_control_event { + /* wmi_fw_status */ + u8 status; + u8 reserved[3]; +} __packed; + +/* WMI_COMMAND_NOT_SUPPORTED_EVENTID */ struct wmi_command_not_supported_event { /* device id */ u8 mid; @@ -2936,4 +3225,62 @@ struct wmi_command_not_supported_event { __le16 reserved1; } __packed; +/* WMI_TSF_SYNC_CMDID */ +struct wmi_tsf_sync_cmd { + /* The time interval to send announce frame in one BI */ + u8 interval_ms; + /* The mcs to send announce frame */ + u8 mcs; + u8 reserved[6]; +} __packed; + +/* WMI_TSF_SYNC_STATUS_EVENTID */ +enum wmi_tsf_sync_status { + WMI_TSF_SYNC_SUCCESS = 0x00, + WMI_TSF_SYNC_FAILED = 0x01, + WMI_TSF_SYNC_REJECTED = 0x02, +}; + +/* WMI_TSF_SYNC_STATUS_EVENTID */ +struct wmi_tsf_sync_status_event { + /* enum wmi_tsf_sync_status */ + u8 status; + u8 reserved[3]; +} __packed; + +/* WMI_GET_CCA_INDICATIONS_EVENTID */ +struct wmi_get_cca_indications_event { + /* wmi_fw_status */ + u8 status; + /* CCA-Energy Detect in percentage over last BI (0..100) */ + u8 cca_ed_percent; + /* Averaged CCA-Energy Detect in percent over number of BIs (0..100) */ + u8 cca_ed_avg_percent; + /* NAV percent over last BI (0..100) */ + u8 nav_percent; + /* Averaged NAV percent over number of BIs (0..100) */ + u8 nav_avg_percent; + u8 reserved[3]; +} __packed; + +/* WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_CMDID */ +struct wmi_set_cca_indications_bi_avg_num_cmd { + /* set the number of bis to average cca_ed (0..255) */ + u8 bi_number; + u8 reserved[3]; +} __packed; + +/* WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_EVENTID */ +struct wmi_set_cca_indications_bi_avg_num_event { + /* wmi_fw_status */ + u8 status; + u8 reserved[3]; +} __packed; + +/* WMI_INTERNAL_FW_SET_CHANNEL */ +struct wmi_internal_fw_set_channel_event { + u8 channel_num; + u8 reserved[3]; +} __packed; + #endif /* __WILOCITY_WMI_H__ */ |