diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/at803x.c | 50 |
1 files changed, 49 insertions, 1 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index d7799beb811c..e0f56850edc5 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -144,6 +144,9 @@ #define ATH8035_PHY_ID 0x004dd072 #define AT8030_PHY_ID_MASK 0xffffffef +#define AT803X_PAGE_FIBER 0 +#define AT803X_PAGE_COPPER 1 + MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver"); MODULE_AUTHOR("Matus Ujhelyi"); MODULE_LICENSE("GPL"); @@ -198,6 +201,35 @@ static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg, return phy_write(phydev, AT803X_DEBUG_DATA, val); } +static int at803x_write_page(struct phy_device *phydev, int page) +{ + int mask; + int set; + + if (page == AT803X_PAGE_COPPER) { + set = AT803X_BT_BX_REG_SEL; + mask = 0; + } else { + set = 0; + mask = AT803X_BT_BX_REG_SEL; + } + + return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set); +} + +static int at803x_read_page(struct phy_device *phydev) +{ + int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG); + + if (ccr < 0) + return ccr; + + if (ccr & AT803X_BT_BX_REG_SEL) + return AT803X_PAGE_COPPER; + + return AT803X_PAGE_FIBER; +} + static int at803x_enable_rx_delay(struct phy_device *phydev) { return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0, @@ -535,6 +567,7 @@ static int at803x_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; struct at803x_priv *priv; + int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -542,7 +575,20 @@ static int at803x_probe(struct phy_device *phydev) phydev->priv = priv; - return at803x_parse_dt(phydev); + ret = at803x_parse_dt(phydev); + if (ret) + return ret; + + /* Some bootloaders leave the fiber page selected. + * Switch to the copper page, as otherwise we read + * the PHY capabilities from the fiber side. + */ + if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) { + ret = phy_select_page(phydev, AT803X_PAGE_COPPER); + ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret); + } + + return ret; } static void at803x_remove(struct phy_device *phydev) @@ -1166,6 +1212,8 @@ static struct phy_driver at803x_driver[] = { .get_wol = at803x_get_wol, .suspend = at803x_suspend, .resume = at803x_resume, + .read_page = at803x_read_page, + .write_page = at803x_write_page, /* PHY_GBIT_FEATURES */ .read_status = at803x_read_status, .config_intr = &at803x_config_intr, |