diff options
Diffstat (limited to 'drivers/net/ethernet/smsc')
-rw-r--r-- | drivers/net/ethernet/smsc/epic100.c | 125 |
1 files changed, 58 insertions, 67 deletions
diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c index 8c5c24a16f8a..8ae1f8a7bf38 100644 --- a/drivers/net/ethernet/smsc/epic100.c +++ b/drivers/net/ethernet/smsc/epic100.c @@ -91,9 +91,9 @@ static int rx_copybreak; /* These identify the driver base version and may not be removed. */ static char version[] = -DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n"; +DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>"; static char version2[] = -" (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; +" (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver"); @@ -332,9 +332,7 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* when built into the kernel, we only print version if device is found */ #ifndef MODULE - static int printed_version; - if (!printed_version++) - printk(KERN_INFO "%s%s", version, version2); + pr_info_once("%s%s\n", version, version2); #endif card_idx++; @@ -423,9 +421,9 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(er16(LAN0 + i*4)); if (debug > 2) { - dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n"); + dev_dbg(&pdev->dev, "EEPROM contents:\n"); for (i = 0; i < 64; i++) - printk(" %4.4x%s", read_eeprom(ep, i), + pr_cont(" %4.4x%s", read_eeprom(ep, i), i % 16 == 15 ? "\n" : ""); } @@ -490,10 +488,10 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret < 0) goto err_out_unmap_rx; - printk(KERN_INFO "%s: %s at %lx, IRQ %d, %pM\n", - dev->name, pci_id_tbl[chip_idx].name, - (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq, - dev->dev_addr); + netdev_info(dev, "%s at %lx, IRQ %d, %pM\n", + pci_id_tbl[chip_idx].name, + (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq, + dev->dev_addr); out: return ret; @@ -703,9 +701,8 @@ static int epic_open(struct net_device *dev) mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]); if (dev->if_port == 1) { if (debug > 1) - printk(KERN_INFO "%s: Using the 10base2 transceiver, MII " - "status %4.4x.\n", - dev->name, mdio_read(dev, ep->phys[0], MII_BMSR)); + netdev_info(dev, "Using the 10base2 transceiver, MII status %4.4x.\n", + mdio_read(dev, ep->phys[0], MII_BMSR)); } } else { int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA); @@ -715,10 +712,10 @@ static int epic_open(struct net_device *dev) else if (! (mii_lpa & LPA_LPACK)) mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART); if (debug > 1) - printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d" - " register read of %4.4x.\n", dev->name, - ep->mii.full_duplex ? "full" : "half", - ep->phys[0], mii_lpa); + netdev_info(dev, "Setting %s-duplex based on MII xcvr %d register read of %4.4x.\n", + ep->mii.full_duplex ? "full" + : "half", + ep->phys[0], mii_lpa); } } @@ -738,10 +735,9 @@ static int epic_open(struct net_device *dev) TxUnderrun); if (debug > 1) { - printk(KERN_DEBUG "%s: epic_open() ioaddr %p IRQ %d " - "status %4.4x %s-duplex.\n", - dev->name, ioaddr, irq, er32(GENCTL), - ep->mii.full_duplex ? "full" : "half"); + netdev_dbg(dev, "epic_open() ioaddr %p IRQ %d status %4.4x %s-duplex.\n", + ioaddr, irq, er32(GENCTL), + ep->mii.full_duplex ? "full" : "half"); } /* Set the timer to switch to check for link beat and perhaps switch @@ -790,8 +786,8 @@ static void epic_restart(struct net_device *dev) /* Soft reset the chip. */ ew32(GENCTL, 0x4001); - printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n", - dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx); + netdev_dbg(dev, "Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n", + ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx); udelay(1); /* This magic is documented in SMSC app note 7.15 */ @@ -827,9 +823,8 @@ static void epic_restart(struct net_device *dev) ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) | TxUnderrun); - printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x" - " interrupt %4.4x.\n", - dev->name, er32(COMMAND), er32(GENCTL), er32(INTSTAT)); + netdev_dbg(dev, "epic_restart() done, cmd status %4.4x, ctl %4.4x interrupt %4.4x.\n", + er32(COMMAND), er32(GENCTL), er32(INTSTAT)); } static void check_media(struct net_device *dev) @@ -846,9 +841,9 @@ static void check_media(struct net_device *dev) return; if (ep->mii.full_duplex != duplex) { ep->mii.full_duplex = duplex; - printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link" - " partner capability of %4.4x.\n", dev->name, - ep->mii.full_duplex ? "full" : "half", ep->phys[0], mii_lpa); + netdev_info(dev, "Setting %s-duplex based on MII #%d link partner capability of %4.4x.\n", + ep->mii.full_duplex ? "full" : "half", + ep->phys[0], mii_lpa); ew32(TxCtrl, ep->mii.full_duplex ? 0x7F : 0x79); } } @@ -861,11 +856,10 @@ static void epic_timer(unsigned long data) int next_tick = 5*HZ; if (debug > 3) { - printk(KERN_DEBUG "%s: Media monitor tick, Tx status %8.8x.\n", - dev->name, er32(TxSTAT)); - printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x " - "IntStatus %4.4x RxStatus %4.4x.\n", dev->name, - er32(INTMASK), er32(INTSTAT), er32(RxSTAT)); + netdev_dbg(dev, "Media monitor tick, Tx status %8.8x.\n", + er32(TxSTAT)); + netdev_dbg(dev, "Other registers are IntMask %4.4x IntStatus %4.4x RxStatus %4.4x.\n", + er32(INTMASK), er32(INTSTAT), er32(RxSTAT)); } check_media(dev); @@ -880,11 +874,11 @@ static void epic_tx_timeout(struct net_device *dev) void __iomem *ioaddr = ep->ioaddr; if (debug > 0) { - printk(KERN_WARNING "%s: Transmit timeout using MII device, " - "Tx status %4.4x.\n", dev->name, er16(TxSTAT)); + netdev_warn(dev, "Transmit timeout using MII device, Tx status %4.4x.\n", + er16(TxSTAT)); if (debug > 1) { - printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n", - dev->name, ep->dirty_tx, ep->cur_tx); + netdev_dbg(dev, "Tx indices: dirty_tx %d, cur_tx %d.\n", + ep->dirty_tx, ep->cur_tx); } } if (er16(TxSTAT) & 0x10) { /* Tx FIFO underflow. */ @@ -994,9 +988,8 @@ static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev) ew32(COMMAND, TxQueued); if (debug > 4) - printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, " - "flag %2.2x Tx status %8.8x.\n", dev->name, skb->len, - entry, ctrl_word, er32(TxSTAT)); + netdev_dbg(dev, "Queued Tx packet size %d to slot %d, flag %2.2x Tx status %8.8x.\n", + skb->len, entry, ctrl_word, er32(TxSTAT)); return NETDEV_TX_OK; } @@ -1009,8 +1002,8 @@ static void epic_tx_error(struct net_device *dev, struct epic_private *ep, #ifndef final_version /* There was an major error, log it. */ if (debug > 1) - printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n", - dev->name, status); + netdev_dbg(dev, "Transmit error, Tx status %8.8x.\n", + status); #endif stats->tx_errors++; if (status & 0x1050) @@ -1057,9 +1050,8 @@ static void epic_tx(struct net_device *dev, struct epic_private *ep) #ifndef final_version if (cur_tx - dirty_tx > TX_RING_SIZE) { - printk(KERN_WARNING - "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n", - dev->name, dirty_tx, cur_tx, ep->tx_full); + netdev_warn(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d.\n", + dirty_tx, cur_tx, ep->tx_full); dirty_tx += TX_RING_SIZE; } #endif @@ -1086,8 +1078,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance) ew32(INTSTAT, status & EpicNormalEvent); if (debug > 4) { - printk(KERN_DEBUG "%s: Interrupt, status=%#8.8x new " - "intstat=%#8.8x.\n", dev->name, status, er32(INTSTAT)); + netdev_dbg(dev, "Interrupt, status=%#8.8x new intstat=%#8.8x.\n", + status, er32(INTSTAT)); } if ((status & IntrSummary) == 0) @@ -1125,8 +1117,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance) ew32(COMMAND, RestartTx); } if (status & PCIBusErr170) { - printk(KERN_ERR "%s: PCI Bus Error! status %4.4x.\n", - dev->name, status); + netdev_err(dev, "PCI Bus Error! status %4.4x.\n", + status); epic_pause(dev); epic_restart(dev); } @@ -1136,8 +1128,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance) out: if (debug > 3) { - printk(KERN_DEBUG "%s: exit interrupt, intr_status=%#4.4x.\n", - dev->name, status); + netdev_dbg(dev, "exit interrupt, intr_status=%#4.4x.\n", + status); } return IRQ_RETVAL(handled); @@ -1151,7 +1143,7 @@ static int epic_rx(struct net_device *dev, int budget) int work_done = 0; if (debug > 4) - printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry, + netdev_dbg(dev, " In epic_rx(), entry %d %8.8x.\n", entry, ep->rx_ring[entry].rxstatus); if (rx_work_limit > budget) @@ -1162,16 +1154,17 @@ static int epic_rx(struct net_device *dev, int budget) int status = ep->rx_ring[entry].rxstatus; if (debug > 4) - printk(KERN_DEBUG " epic_rx() status was %8.8x.\n", status); + netdev_dbg(dev, " epic_rx() status was %8.8x.\n", + status); if (--rx_work_limit < 0) break; if (status & 0x2006) { if (debug > 2) - printk(KERN_DEBUG "%s: epic_rx() error status was %8.8x.\n", - dev->name, status); + netdev_dbg(dev, "epic_rx() error status was %8.8x.\n", + status); if (status & 0x2000) { - printk(KERN_WARNING "%s: Oversized Ethernet frame spanned " - "multiple buffers, status %4.4x!\n", dev->name, status); + netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %4.4x!\n", + status); dev->stats.rx_length_errors++; } else if (status & 0x0006) /* Rx Frame errors are counted in hardware. */ @@ -1183,9 +1176,8 @@ static int epic_rx(struct net_device *dev, int budget) struct sk_buff *skb; if (pkt_len > PKT_BUF_SZ - 4) { - printk(KERN_ERR "%s: Oversized Ethernet frame, status %x " - "%d bytes.\n", - dev->name, status, pkt_len); + netdev_err(dev, "Oversized Ethernet frame, status %x %d bytes.\n", + status, pkt_len); pkt_len = 1514; } /* Check if the packet is long enough to accept without copying @@ -1305,8 +1297,8 @@ static int epic_close(struct net_device *dev) napi_disable(&ep->napi); if (debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n", - dev->name, er32(INTSTAT)); + netdev_dbg(dev, "Shutting down ethercard, status was %2.2x.\n", + er32(INTSTAT)); del_timer_sync(&ep->timer); @@ -1324,7 +1316,7 @@ static int epic_close(struct net_device *dev) ep->rx_ring[i].buflength = 0; if (skb) { pci_unmap_single(pdev, ep->rx_ring[i].bufaddr, - ep->rx_buf_sz, PCI_DMA_FROMDEVICE); + ep->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); } ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */ @@ -1587,8 +1579,7 @@ static int __init epic_init (void) { /* when a module, this is printed whether or not devices are found in probe */ #ifdef MODULE - printk (KERN_INFO "%s%s", - version, version2); + pr_info("%s%s\n", version, version2); #endif return pci_register_driver(&epic_driver); |