diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 35 |
2 files changed, 39 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h index a5cb755de3a9..3522f536a5df 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h @@ -73,6 +73,7 @@ enum ixgbe_pfvf_api_rev { ixgbe_mbox_api_10, /* API version 1.0, linux/freebsd VF driver */ ixgbe_mbox_api_20, /* API version 2.0, solaris Phase1 VF driver */ ixgbe_mbox_api_11, /* API version 1.1, linux/freebsd VF driver */ + ixgbe_mbox_api_12, /* API version 1.2, linux/freebsd VF driver */ /* This value should always be last */ ixgbe_mbox_api_unknown, /* indicates that API version is not known */ }; @@ -97,6 +98,9 @@ enum ixgbe_pfvf_api_rev { #define IXGBE_VF_TRANS_VLAN 3 /* Indication of port vlan */ #define IXGBE_VF_DEF_QUEUE 4 /* Default queue offset */ +/* mailbox API, version 1.2 VF requests */ +#define IXGBE_VF_GET_RETA 0x0a /* VF request for RETA */ + /* length of permanent address message returned from PF */ #define IXGBE_VF_PERMADDR_MSG_LEN 4 /* word in permanent address message with the current multicast type */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 94fc43a5f9f7..58566a139a50 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -434,6 +434,7 @@ static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) #endif /* CONFIG_FCOE */ switch (adapter->vfinfo[vf].vf_api) { case ixgbe_mbox_api_11: + case ixgbe_mbox_api_12: /* * Version 1.1 supports jumbo frames on VFs if PF has * jumbo frames enabled which means legacy VFs are @@ -901,6 +902,7 @@ static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter, switch (api) { case ixgbe_mbox_api_10: case ixgbe_mbox_api_11: + case ixgbe_mbox_api_12: adapter->vfinfo[vf].vf_api = api; return 0; default: @@ -924,6 +926,7 @@ static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter, switch (adapter->vfinfo[vf].vf_api) { case ixgbe_mbox_api_20: case ixgbe_mbox_api_11: + case ixgbe_mbox_api_12: break; default: return -1; @@ -951,6 +954,35 @@ static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter, return 0; } +static int ixgbe_get_vf_reta(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) +{ + u32 i, j; + u32 *out_buf = &msgbuf[1]; + const u8 *reta = adapter->rss_indir_tbl; + u32 reta_size = ixgbe_rss_indir_tbl_entries(adapter); + + /* Check if operation is permitted */ + if (!adapter->vfinfo[vf].rss_query_enabled) + return -EPERM; + + /* verify the PF is supporting the correct API */ + if (adapter->vfinfo[vf].vf_api != ixgbe_mbox_api_12) + return -EOPNOTSUPP; + + /* This mailbox command is supported (required) only for 82599 and x540 + * VFs which support up to 4 RSS queues. Therefore we will compress the + * RETA by saving only 2 bits from each entry. This way we will be able + * to transfer the whole RETA in a single mailbox operation. + */ + for (i = 0; i < reta_size / 16; i++) { + out_buf[i] = 0; + for (j = 0; j < 16; j++) + out_buf[i] |= (u32)(reta[16 * i + j] & 0x3) << (2 * j); + } + + return 0; +} + static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) { u32 mbx_size = IXGBE_VFMAILBOX_SIZE; @@ -1007,6 +1039,9 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) case IXGBE_VF_GET_QUEUES: retval = ixgbe_get_vf_queues(adapter, msgbuf, vf); break; + case IXGBE_VF_GET_RETA: + retval = ixgbe_get_vf_reta(adapter, msgbuf, vf); + break; default: e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]); retval = IXGBE_ERR_MBX; |