diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_defines.h')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_defines.h | 70 |
1 files changed, 67 insertions, 3 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 393c896ac7e7..b05bf925ac72 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -43,7 +43,11 @@ #define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ /* Extended Device Control */ +#define E1000_CTRL_EXT_SDP2_DATA 0x00000040 /* Value of SW Defineable Pin 2 */ #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */ +#define E1000_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */ +#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */ + /* Physical Func Reset Done Indication */ #define E1000_CTRL_EXT_PFRSTD 0x00004000 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 @@ -190,7 +194,8 @@ /* enable link status from external LINK_0 and LINK_1 pins */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ -#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */ +#define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */ #define E1000_CTRL_RST 0x04000000 /* Global reset */ #define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ #define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ @@ -528,8 +533,67 @@ #define E1000_TIMINCA_16NS_SHIFT 24 -#define E1000_TSICR_TXTS 0x00000002 -#define E1000_TSIM_TXTS 0x00000002 +/* Time Sync Interrupt Cause/Mask Register Bits */ + +#define TSINTR_SYS_WRAP (1 << 0) /* SYSTIM Wrap around. */ +#define TSINTR_TXTS (1 << 1) /* Transmit Timestamp. */ +#define TSINTR_RXTS (1 << 2) /* Receive Timestamp. */ +#define TSINTR_TT0 (1 << 3) /* Target Time 0 Trigger. */ +#define TSINTR_TT1 (1 << 4) /* Target Time 1 Trigger. */ +#define TSINTR_AUTT0 (1 << 5) /* Auxiliary Timestamp 0 Taken. */ +#define TSINTR_AUTT1 (1 << 6) /* Auxiliary Timestamp 1 Taken. */ +#define TSINTR_TADJ (1 << 7) /* Time Adjust Done. */ + +#define TSYNC_INTERRUPTS TSINTR_TXTS +#define E1000_TSICR_TXTS TSINTR_TXTS + +/* TSAUXC Configuration Bits */ +#define TSAUXC_EN_TT0 (1 << 0) /* Enable target time 0. */ +#define TSAUXC_EN_TT1 (1 << 1) /* Enable target time 1. */ +#define TSAUXC_EN_CLK0 (1 << 2) /* Enable Configurable Frequency Clock 0. */ +#define TSAUXC_SAMP_AUT0 (1 << 3) /* Latch SYSTIML/H into AUXSTMPL/0. */ +#define TSAUXC_ST0 (1 << 4) /* Start Clock 0 Toggle on Target Time 0. */ +#define TSAUXC_EN_CLK1 (1 << 5) /* Enable Configurable Frequency Clock 1. */ +#define TSAUXC_SAMP_AUT1 (1 << 6) /* Latch SYSTIML/H into AUXSTMPL/1. */ +#define TSAUXC_ST1 (1 << 7) /* Start Clock 1 Toggle on Target Time 1. */ +#define TSAUXC_EN_TS0 (1 << 8) /* Enable hardware timestamp 0. */ +#define TSAUXC_AUTT0 (1 << 9) /* Auxiliary Timestamp Taken. */ +#define TSAUXC_EN_TS1 (1 << 10) /* Enable hardware timestamp 0. */ +#define TSAUXC_AUTT1 (1 << 11) /* Auxiliary Timestamp Taken. */ +#define TSAUXC_PLSG (1 << 17) /* Generate a pulse. */ +#define TSAUXC_DISABLE (1 << 31) /* Disable SYSTIM Count Operation. */ + +/* SDP Configuration Bits */ +#define AUX0_SEL_SDP0 (0 << 0) /* Assign SDP0 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP1 (1 << 0) /* Assign SDP1 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP2 (2 << 0) /* Assign SDP2 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP3 (3 << 0) /* Assign SDP3 to auxiliary time stamp 0. */ +#define AUX0_TS_SDP_EN (1 << 2) /* Enable auxiliary time stamp trigger 0. */ +#define AUX1_SEL_SDP0 (0 << 3) /* Assign SDP0 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP1 (1 << 3) /* Assign SDP1 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP2 (2 << 3) /* Assign SDP2 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP3 (3 << 3) /* Assign SDP3 to auxiliary time stamp 1. */ +#define AUX1_TS_SDP_EN (1 << 5) /* Enable auxiliary time stamp trigger 1. */ +#define TS_SDP0_SEL_TT0 (0 << 6) /* Target time 0 is output on SDP0. */ +#define TS_SDP0_SEL_TT1 (1 << 6) /* Target time 1 is output on SDP0. */ +#define TS_SDP0_SEL_FC0 (2 << 6) /* Freq clock 0 is output on SDP0. */ +#define TS_SDP0_SEL_FC1 (3 << 6) /* Freq clock 1 is output on SDP0. */ +#define TS_SDP0_EN (1 << 8) /* SDP0 is assigned to Tsync. */ +#define TS_SDP1_SEL_TT0 (0 << 9) /* Target time 0 is output on SDP1. */ +#define TS_SDP1_SEL_TT1 (1 << 9) /* Target time 1 is output on SDP1. */ +#define TS_SDP1_SEL_FC0 (2 << 9) /* Freq clock 0 is output on SDP1. */ +#define TS_SDP1_SEL_FC1 (3 << 9) /* Freq clock 1 is output on SDP1. */ +#define TS_SDP1_EN (1 << 11) /* SDP1 is assigned to Tsync. */ +#define TS_SDP2_SEL_TT0 (0 << 12) /* Target time 0 is output on SDP2. */ +#define TS_SDP2_SEL_TT1 (1 << 12) /* Target time 1 is output on SDP2. */ +#define TS_SDP2_SEL_FC0 (2 << 12) /* Freq clock 0 is output on SDP2. */ +#define TS_SDP2_SEL_FC1 (3 << 12) /* Freq clock 1 is output on SDP2. */ +#define TS_SDP2_EN (1 << 14) /* SDP2 is assigned to Tsync. */ +#define TS_SDP3_SEL_TT0 (0 << 15) /* Target time 0 is output on SDP3. */ +#define TS_SDP3_SEL_TT1 (1 << 15) /* Target time 1 is output on SDP3. */ +#define TS_SDP3_SEL_FC0 (2 << 15) /* Freq clock 0 is output on SDP3. */ +#define TS_SDP3_SEL_FC1 (3 << 15) /* Freq clock 1 is output on SDP3. */ +#define TS_SDP3_EN (1 << 17) /* SDP3 is assigned to Tsync. */ #define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ #define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ |