diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h')
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 55 |
1 files changed, 52 insertions, 3 deletions
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h index f9f48d1900b0..ed5602f4bbcd 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h @@ -244,6 +244,8 @@ enum i40e_admin_queue_opc { i40e_aqc_opc_set_phy_debug = 0x0622, i40e_aqc_opc_upload_ext_phy_fm = 0x0625, i40e_aqc_opc_run_phy_activity = 0x0626, + i40e_aqc_opc_set_phy_register = 0x0628, + i40e_aqc_opc_get_phy_register = 0x0629, /* NVM commands */ i40e_aqc_opc_nvm_read = 0x0701, @@ -769,7 +771,22 @@ struct i40e_aqc_set_switch_config { #define I40E_AQ_SET_SWITCH_CFG_PROMISC 0x0001 #define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002 __le16 valid_flags; - u8 reserved[12]; + /* The ethertype in switch_tag is dropped on ingress and used + * internally by the switch. Set this to zero for the default + * of 0x88a8 (802.1ad). Should be zero for firmware API + * versions lower than 1.7. + */ + __le16 switch_tag; + /* The ethertypes in first_tag and second_tag are used to + * match the outer and inner VLAN tags (respectively) when HW + * double VLAN tagging is enabled via the set port parameters + * AQ command. Otherwise these are both ignored. Set them to + * zero for their defaults of 0x8100 (802.1Q). Should be zero + * for firmware API versions lower than 1.7. + */ + __le16 first_tag; + __le16 second_tag; + u8 reserved[6]; }; I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config); @@ -1730,6 +1747,8 @@ enum i40e_aq_phy_type { I40E_PHY_TYPE_10GBASE_CR1_CU = 0xB, I40E_PHY_TYPE_10GBASE_AOC = 0xC, I40E_PHY_TYPE_40GBASE_AOC = 0xD, + I40E_PHY_TYPE_UNRECOGNIZED = 0xE, + I40E_PHY_TYPE_UNSUPPORTED = 0xF, I40E_PHY_TYPE_100BASE_TX = 0x11, I40E_PHY_TYPE_1000BASE_T = 0x12, I40E_PHY_TYPE_10GBASE_T = 0x13, @@ -1748,6 +1767,8 @@ enum i40e_aq_phy_type { I40E_PHY_TYPE_25GBASE_CR = 0x20, I40E_PHY_TYPE_25GBASE_SR = 0x21, I40E_PHY_TYPE_25GBASE_LR = 0x22, + I40E_PHY_TYPE_EMPTY = 0xFE, + I40E_PHY_TYPE_DEFAULT = 0xFF, I40E_PHY_TYPE_MAX }; @@ -1938,19 +1959,31 @@ struct i40e_aqc_get_link_status { #define I40E_AQ_25G_SERDES_UCODE_ERR 0X04 #define I40E_AQ_25G_NIMB_UCODE_ERR 0X05 u8 loopback; /* use defines from i40e_aqc_set_lb_mode */ +/* Since firmware API 1.7 loopback field keeps power class info as well */ +#define I40E_AQ_LOOPBACK_MASK 0x07 +#define I40E_AQ_PWR_CLASS_SHIFT_LB 6 +#define I40E_AQ_PWR_CLASS_MASK_LB (0x03 << I40E_AQ_PWR_CLASS_SHIFT_LB) __le16 max_frame_size; u8 config; #define I40E_AQ_CONFIG_FEC_KR_ENA 0x01 #define I40E_AQ_CONFIG_FEC_RS_ENA 0x02 #define I40E_AQ_CONFIG_CRC_ENA 0x04 #define I40E_AQ_CONFIG_PACING_MASK 0x78 - u8 power_desc; + union { + struct { + u8 power_desc; #define I40E_AQ_LINK_POWER_CLASS_1 0x00 #define I40E_AQ_LINK_POWER_CLASS_2 0x01 #define I40E_AQ_LINK_POWER_CLASS_3 0x02 #define I40E_AQ_LINK_POWER_CLASS_4 0x03 #define I40E_AQ_PWR_CLASS_MASK 0x03 - u8 reserved[4]; + u8 reserved[4]; + }; + struct { + u8 link_type[4]; + u8 link_type_ext; + }; + }; }; I40E_CHECK_CMD_LENGTH(i40e_aqc_get_link_status); @@ -2030,6 +2063,22 @@ struct i40e_aqc_run_phy_activity { I40E_CHECK_CMD_LENGTH(i40e_aqc_run_phy_activity); +/* Set PHY Register command (0x0628) */ +/* Get PHY Register command (0x0629) */ +struct i40e_aqc_phy_register_access { + u8 phy_interface; +#define I40E_AQ_PHY_REG_ACCESS_INTERNAL 0 +#define I40E_AQ_PHY_REG_ACCESS_EXTERNAL 1 +#define I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE 2 + u8 dev_address; + u8 reserved1[2]; + __le32 reg_address; + __le32 reg_value; + u8 reserved2[4]; +}; + +I40E_CHECK_CMD_LENGTH(i40e_aqc_phy_register_access); + /* NVM Read command (indirect 0x0701) * NVM Erase commands (direct 0x0702) * NVM Update commands (indirect 0x0703) |