diff options
Diffstat (limited to 'drivers/net/ethernet/freescale')
| -rw-r--r-- | drivers/net/ethernet/freescale/fman/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/fman/fman_port.c | 1778 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/fman/fman_port.h | 151 |
3 files changed, 1930 insertions, 1 deletions
diff --git a/drivers/net/ethernet/freescale/fman/Makefile b/drivers/net/ethernet/freescale/fman/Makefile index 5141532bbeb3..2eb0b9b5c76b 100644 --- a/drivers/net/ethernet/freescale/fman/Makefile +++ b/drivers/net/ethernet/freescale/fman/Makefile @@ -2,5 +2,5 @@ subdir-ccflags-y += -I$(srctree)/drivers/net/ethernet/freescale/fman obj-y += fsl_fman.o fsl_fman_mac.o -fsl_fman-objs := fman_muram.o fman.o fman_sp.o +fsl_fman-objs := fman_muram.o fman.o fman_sp.o fman_port.o fsl_fman_mac-objs := fman_dtsec.o fman_memac.o fman_tgec.o diff --git a/drivers/net/ethernet/freescale/fman/fman_port.c b/drivers/net/ethernet/freescale/fman/fman_port.c new file mode 100644 index 000000000000..70c198d072dc --- /dev/null +++ b/drivers/net/ethernet/freescale/fman/fman_port.c @@ -0,0 +1,1778 @@ +/* + * Copyright 2008 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "fman_port.h" +#include "fman.h" +#include "fman_sp.h" + +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/delay.h> +#include <linux/libfdt_env.h> + +/* Queue ID */ +#define DFLT_FQ_ID 0x00FFFFFF + +/* General defines */ +#define PORT_BMI_FIFO_UNITS 0x100 + +#define MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) \ + min((u32)bmi_max_fifo_size, (u32)1024 * FMAN_BMI_FIFO_UNITS) + +#define PORT_CG_MAP_NUM 8 +#define PORT_PRS_RESULT_WORDS_NUM 8 +#define PORT_IC_OFFSET_UNITS 0x10 + +#define MIN_EXT_BUF_SIZE 64 + +#define BMI_PORT_REGS_OFFSET 0 +#define QMI_PORT_REGS_OFFSET 0x400 + +/* Default values */ +#define DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN \ + DFLT_FM_SP_BUFFER_PREFIX_CONTEXT_DATA_ALIGN + +#define DFLT_PORT_CUT_BYTES_FROM_END 4 + +#define DFLT_PORT_ERRORS_TO_DISCARD FM_PORT_FRM_ERR_CLS_DISCARD +#define DFLT_PORT_MAX_FRAME_LENGTH 9600 + +#define DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(bmi_max_fifo_size) \ + MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) + +#define DFLT_PORT_RX_FIFO_THRESHOLD(major, bmi_max_fifo_size) \ + (major == 6 ? \ + MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) : \ + (MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) * 3 / 4)) \ + +#define DFLT_PORT_EXTRA_NUM_OF_FIFO_BUFS 0 + +/* QMI defines */ +#define QMI_DEQ_CFG_SUBPORTAL_MASK 0x1f + +#define QMI_PORT_CFG_EN 0x80000000 +#define QMI_PORT_STATUS_DEQ_FD_BSY 0x20000000 + +#define QMI_DEQ_CFG_PRI 0x80000000 +#define QMI_DEQ_CFG_TYPE1 0x10000000 +#define QMI_DEQ_CFG_TYPE2 0x20000000 +#define QMI_DEQ_CFG_TYPE3 0x30000000 +#define QMI_DEQ_CFG_PREFETCH_PARTIAL 0x01000000 +#define QMI_DEQ_CFG_PREFETCH_FULL 0x03000000 +#define QMI_DEQ_CFG_SP_MASK 0xf +#define QMI_DEQ_CFG_SP_SHIFT 20 + +#define QMI_BYTE_COUNT_LEVEL_CONTROL(_type) \ + (_type == FMAN_PORT_TYPE_TX ? 0x1400 : 0x400) + +/* BMI defins */ +#define BMI_EBD_EN 0x80000000 + +#define BMI_PORT_CFG_EN 0x80000000 + +#define BMI_PORT_STATUS_BSY 0x80000000 + +#define BMI_DMA_ATTR_SWP_SHIFT FMAN_SP_DMA_ATTR_SWP_SHIFT +#define BMI_DMA_ATTR_WRITE_OPTIMIZE FMAN_SP_DMA_ATTR_WRITE_OPTIMIZE + +#define BMI_RX_FIFO_PRI_ELEVATION_SHIFT 16 +#define BMI_RX_FIFO_THRESHOLD_ETHE 0x80000000 + +#define BMI_FRAME_END_CS_IGNORE_SHIFT 24 +#define BMI_FRAME_END_CS_IGNORE_MASK 0x0000001f + +#define BMI_RX_FRAME_END_CUT_SHIFT 16 +#define BMI_RX_FRAME_END_CUT_MASK 0x0000001f + +#define BMI_IC_TO_EXT_SHIFT FMAN_SP_IC_TO_EXT_SHIFT +#define BMI_IC_TO_EXT_MASK 0x0000001f +#define BMI_IC_FROM_INT_SHIFT FMAN_SP_IC_FROM_INT_SHIFT +#define BMI_IC_FROM_INT_MASK 0x0000000f +#define BMI_IC_SIZE_MASK 0x0000001f + +#define BMI_INT_BUF_MARG_SHIFT 28 +#define BMI_INT_BUF_MARG_MASK 0x0000000f +#define BMI_EXT_BUF_MARG_START_SHIFT FMAN_SP_EXT_BUF_MARG_START_SHIFT +#define BMI_EXT_BUF_MARG_START_MASK 0x000001ff +#define BMI_EXT_BUF_MARG_END_MASK 0x000001ff + +#define BMI_CMD_MR_LEAC 0x00200000 +#define BMI_CMD_MR_SLEAC 0x00100000 +#define BMI_CMD_MR_MA 0x00080000 +#define BMI_CMD_MR_DEAS 0x00040000 +#define BMI_CMD_RX_MR_DEF (BMI_CMD_MR_LEAC | \ + BMI_CMD_MR_SLEAC | \ + BMI_CMD_MR_MA | \ + BMI_CMD_MR_DEAS) +#define BMI_CMD_TX_MR_DEF 0 + +#define BMI_CMD_ATTR_ORDER 0x80000000 +#define BMI_CMD_ATTR_SYNC 0x02000000 +#define BMI_CMD_ATTR_COLOR_SHIFT 26 + +#define BMI_FIFO_PIPELINE_DEPTH_SHIFT 12 +#define BMI_FIFO_PIPELINE_DEPTH_MASK 0x0000000f +#define BMI_NEXT_ENG_FD_BITS_SHIFT 24 + +#define BMI_EXT_BUF_POOL_VALID FMAN_SP_EXT_BUF_POOL_VALID +#define BMI_EXT_BUF_POOL_EN_COUNTER FMAN_SP_EXT_BUF_POOL_EN_COUNTER +#define BMI_EXT_BUF_POOL_BACKUP FMAN_SP_EXT_BUF_POOL_BACKUP +#define BMI_EXT_BUF_POOL_ID_SHIFT 16 +#define BMI_EXT_BUF_POOL_ID_MASK 0x003F0000 +#define BMI_POOL_DEP_NUM_OF_POOLS_SHIFT 16 + +#define BMI_TX_FIFO_MIN_FILL_SHIFT 16 + +#define BMI_PRIORITY_ELEVATION_LEVEL ((0x3FF + 1) * PORT_BMI_FIFO_UNITS) +#define BMI_FIFO_THRESHOLD ((0x3FF + 1) * PORT_BMI_FIFO_UNITS) + +#define BMI_DEQUEUE_PIPELINE_DEPTH(_type, _speed) \ + ((_type == FMAN_PORT_TYPE_TX && _speed == 10000) ? 4 : 1) + +#define RX_ERRS_TO_ENQ \ + (FM_PORT_FRM_ERR_DMA | \ + FM_PORT_FRM_ERR_PHYSICAL | \ + FM_PORT_FRM_ERR_SIZE | \ + FM_PORT_FRM_ERR_EXTRACTION | \ + FM_PORT_FRM_ERR_NO_SCHEME | \ + FM_PORT_FRM_ERR_PRS_TIMEOUT | \ + FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT | \ + FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED | \ + FM_PORT_FRM_ERR_PRS_HDR_ERR | \ + FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW | \ + FM_PORT_FRM_ERR_IPRE) + +/* NIA defines */ +#define NIA_ORDER_RESTOR 0x00800000 +#define NIA_ENG_BMI 0x00500000 +#define NIA_ENG_QMI_ENQ 0x00540000 +#define NIA_ENG_QMI_DEQ 0x00580000 + +#define NIA_BMI_AC_ENQ_FRAME 0x00000002 +#define NIA_BMI_AC_TX_RELEASE 0x000002C0 +#define NIA_BMI_AC_RELEASE 0x000000C0 +#define NIA_BMI_AC_TX 0x00000274 +#define NIA_BMI_AC_FETCH_ALL_FRAME 0x0000020c + +/* Port IDs */ +#define TX_10G_PORT_BASE 0x30 +#define RX_10G_PORT_BASE 0x10 + +/* BMI Rx port register map */ +struct fman_port_rx_bmi_regs { + u32 fmbm_rcfg; /* Rx Configuration */ + u32 fmbm_rst; /* Rx Status */ + u32 fmbm_rda; /* Rx DMA attributes */ + u32 fmbm_rfp; /* Rx FIFO Parameters */ + u32 fmbm_rfed; /* Rx Frame End Data */ + u32 fmbm_ricp; /* Rx Internal Context Parameters */ + u32 fmbm_rim; /* Rx Internal Buffer Margins */ + u32 fmbm_rebm; /* Rx External Buffer Margins */ + u32 fmbm_rfne; /* Rx Frame Next Engine */ + u32 fmbm_rfca; /* Rx Frame Command Attributes. */ + u32 fmbm_rfpne; /* Rx Frame Parser Next Engine */ + u32 fmbm_rpso; /* Rx Parse Start Offset */ + u32 fmbm_rpp; /* Rx Policer Profile */ + u32 fmbm_rccb; /* Rx Coarse Classification Base */ + u32 fmbm_reth; /* Rx Excessive Threshold */ + u32 reserved003c[1]; /* (0x03C 0x03F) */ + u32 fmbm_rprai[PORT_PRS_RESULT_WORDS_NUM]; + /* Rx Parse Results Array Init */ + u32 fmbm_rfqid; /* Rx Frame Queue ID */ + u32 fmbm_refqid; /* Rx Error Frame Queue ID */ + u32 fmbm_rfsdm; /* Rx Frame Status Discard Mask */ + u32 fmbm_rfsem; /* Rx Frame Status Error Mask */ + u32 fmbm_rfene; /* Rx Frame Enqueue Next Engine */ + u32 reserved0074[0x2]; /* (0x074-0x07C) */ + u32 fmbm_rcmne; /* Rx Frame Continuous Mode Next Engine */ + u32 reserved0080[0x20]; /* (0x080 0x0FF) */ + u32 fmbm_ebmpi[FMAN_PORT_MAX_EXT_POOLS_NUM]; + /* Buffer Manager pool Information- */ + u32 fmbm_acnt[FMAN_PORT_MAX_EXT_POOLS_NUM]; /* Allocate Counter- */ + u32 reserved0130[8]; /* 0x130/0x140 - 0x15F reserved - */ + u32 fmbm_rcgm[PORT_CG_MAP_NUM]; /* Congestion Group Map */ + u32 fmbm_mpd; /* BM Pool Depletion */ + u32 reserved0184[0x1F]; /* (0x184 0x1FF) */ + u32 fmbm_rstc; /* Rx Statistics Counters */ + u32 fmbm_rfrc; /* Rx Frame Counter */ + u32 fmbm_rfbc; /* Rx Bad Frames Counter */ + u32 fmbm_rlfc; /* Rx Large Frames Counter */ + u32 fmbm_rffc; /* Rx Filter Frames Counter */ + u32 fmbm_rfdc; /* Rx Frame Discard Counter */ + u32 fmbm_rfldec; /* Rx Frames List DMA Error Counter */ + u32 fmbm_rodc; /* Rx Out of Buffers Discard nntr */ + u32 fmbm_rbdc; /* Rx Buffers Deallocate Counter */ + u32 fmbm_rpec; /* RX Prepare to enqueue Counte */ + u32 reserved0224[0x16]; /* (0x224 0x27F) */ + u32 fmbm_rpc; /* Rx Performance Counters */ + u32 fmbm_rpcp; /* Rx Performance Count Parameters */ + u32 fmbm_rccn; /* Rx Cycle Counter */ + u32 fmbm_rtuc; /* Rx Tasks Utilization Counter */ + u32 fmbm_rrquc; /* Rx Receive Queue Utilization cntr */ + u32 fmbm_rduc; /* Rx DMA Utilization Counter */ + u32 fmbm_rfuc; /* Rx FIFO Utilization Counter */ + u32 fmbm_rpac; /* Rx Pause Activation Counter */ + u32 reserved02a0[0x18]; /* (0x2A0 0x2FF) */ + u32 fmbm_rdcfg[0x3]; /* Rx Debug Configuration */ + u32 fmbm_rgpr; /* Rx General Purpose Register */ + u32 reserved0310[0x3a]; +}; + +/* BMI Tx port register map */ +struct fman_port_tx_bmi_regs { + u32 fmbm_tcfg; /* Tx Configuration */ + u32 fmbm_tst; /* Tx Status */ + u32 fmbm_tda; /* Tx DMA attributes */ + u32 fmbm_tfp; /* Tx FIFO Parameters */ + u32 fmbm_tfed; /* Tx Frame End Data */ + u32 fmbm_ticp; /* Tx Internal Context Parameters */ + u32 fmbm_tfdne; /* Tx Frame Dequeue Next Engine. */ + u32 fmbm_tfca; /* Tx Frame Command attribute. */ + u32 fmbm_tcfqid; /* Tx Confirmation Frame Queue ID. */ + u32 fmbm_tefqid; /* Tx Frame Error Queue ID */ + u32 fmbm_tfene; /* Tx Frame Enqueue Next Engine */ + u32 fmbm_trlmts; /* Tx Rate Limiter Scale */ + u32 fmbm_trlmt; /* Tx Rate Limiter */ + u32 reserved0034[0x0e]; /* (0x034-0x6c) */ + u32 fmbm_tccb; /* Tx Coarse Classification base */ + u32 fmbm_tfne; /* Tx Frame Next Engine */ + u32 fmbm_tpfcm[0x02]; + /* Tx Priority based Flow Control (PFC) Mapping */ + u32 fmbm_tcmne; /* Tx Frame Continuous Mode Next Engine */ + u32 reserved0080[0x60]; /* (0x080-0x200) */ + u32 fmbm_tstc; /* Tx Statistics Counters */ + u32 fmbm_tfrc; /* Tx Frame Counter */ + u32 fmbm_tfdc; /* Tx Frames Discard Counter */ + u32 fmbm_tfledc; /* Tx Frame len error discard cntr */ + u32 fmbm_tfufdc; /* Tx Frame unsprt frmt discard cntr */ + u32 fmbm_tbdc; /* Tx Buffers Deallocate Counter */ + u32 reserved0218[0x1A]; /* (0x218-0x280) */ + u32 fmbm_tpc; /* Tx Performance Counters */ + u32 fmbm_tpcp; /* Tx Performance Count Parameters */ + u32 fmbm_tccn; /* Tx Cycle Counter */ + u32 fmbm_ttuc; /* Tx Tasks Utilization Counter */ + u32 fmbm_ttcquc; /* Tx Transmit conf Q util Counter */ + u32 fmbm_tduc; /* Tx DMA Utilization Counter */ + u32 fmbm_tfuc; /* Tx FIFO Utilization Counter */ + u32 reserved029c[16]; /* (0x29C-0x2FF) */ + u32 fmbm_tdcfg[0x3]; /* Tx Debug Configuration */ + u32 fmbm_tgpr; /* Tx General Purpose Register */ + u32 reserved0310[0x3a]; /* (0x310-0x3FF) */ +}; + +/* BMI port register map */ +union fman_port_bmi_regs { + struct fman_port_rx_bmi_regs rx; + struct fman_port_tx_bmi_regs tx; +}; + +/* QMI port register map */ +struct fman_port_qmi_regs { + u32 fmqm_pnc; /* PortID n Configuration Register */ + u32 fmqm_pns; /* PortID n Status Register */ + u32 fmqm_pnts; /* PortID n Task Status Register */ + u32 reserved00c[4]; /* 0xn00C - 0xn01B */ + u32 fmqm_pnen; /* PortID n Enqueue NIA Register */ + u32 fmqm_pnetfc; /* PortID n Enq Total Frame Counter */ + u32 reserved024[2]; /* 0xn024 - 0x02B */ + u32 fmqm_pndn; /* PortID n Dequeue NIA Register */ + u32 fmqm_pndc; /* PortID n Dequeue Config Register */ + u32 fmqm_pndtfc; /* PortID n Dequeue tot Frame cntr */ + u32 fmqm_pndfdc; /* PortID n Dequeue FQID Dflt Cntr */ + u32 fmqm_pndcc; /* PortID n Dequeue Confirm Counter */ +}; + +/* QMI dequeue prefetch modes */ +enum fman_port_deq_prefetch { + FMAN_PORT_DEQ_NO_PREFETCH, /* No prefetch mode */ + FMAN_PORT_DEQ_PART_PREFETCH, /* Partial prefetch mode */ + FMAN_PORT_DEQ_FULL_PREFETCH /* Full prefetch mode */ +}; + +/* A structure for defining FM port resources */ +struct fman_port_rsrc { + u32 num; /* Committed required resource */ + u32 extra; /* Extra (not committed) required resource */ +}; + +enum fman_port_dma_swap { + FMAN_PORT_DMA_NO_SWAP, /* No swap, transfer data as is */ + FMAN_PORT_DMA_SWAP_LE, + /* The transferred data should be swapped in PPC Little Endian mode */ + FMAN_PORT_DMA_SWAP_BE + /* The transferred data should be swapped in Big Endian mode */ +}; + +/* Default port color */ +enum fman_port_color { + FMAN_PORT_COLOR_GREEN, /* Default port color is green */ + FMAN_PORT_COLOR_YELLOW, /* Default port color is yellow */ + FMAN_PORT_COLOR_RED, /* Default port color is red */ + FMAN_PORT_COLOR_OVERRIDE /* Ignore color */ +}; + +/* QMI dequeue from the SP channel - types */ +enum fman_port_deq_type { + FMAN_PORT_DEQ_BY_PRI, + /* Priority precedence and Intra-Class scheduling */ + FMAN_PORT_DEQ_ACTIVE_FQ, + /* Active FQ precedence and Intra-Class scheduling */ + FMAN_PORT_DEQ_ACTIVE_FQ_NO_ICS + /* Active FQ precedence and override Intra-Class scheduling */ +}; + +/* External buffer pools configuration */ +struct fman_port_bpools { + u8 count; /* Num of pools to set up */ + bool counters_enable; /* Enable allocate counters */ + u8 grp_bp_depleted_num; + /* Number of depleted pools - if reached the BMI indicates + * the MAC to send a pause frame + */ + struct { + u8 bpid; /* BM pool ID */ + u16 size; + /* Pool's size - must be in ascending order */ + bool is_backup; + /* If this is a backup pool */ + bool grp_bp_depleted; + /* Consider this buffer in multiple pools depletion criteria */ + bool single_bp_depleted; + /* Consider this buffer in single pool depletion criteria */ + } bpool[FMAN_PORT_MAX_EXT_POOLS_NUM]; +}; + +struct fman_port_cfg { + u32 dflt_fqid; + u32 err_fqid; + u8 deq_sp; + bool deq_high_priority; + enum fman_port_deq_type deq_type; + enum fman_port_deq_prefetch deq_prefetch_option; + u16 deq_byte_cnt; + u8 cheksum_last_bytes_ignore; + u8 rx_cut_end_bytes; + struct fman_buf_pool_depletion buf_pool_depletion; + struct fman_ext_pools ext_buf_pools; + u32 tx_fifo_min_level; + u32 tx_fifo_low_comf_level; + u32 rx_pri_elevation; + u32 rx_fifo_thr; + struct fman_sp_buf_margins buf_margins; + u32 int_buf_start_margin; + struct fman_sp_int_context_data_copy int_context; + u32 discard_mask; + u32 err_mask; + struct fman_buffer_prefix_content buffer_prefix_content; + bool dont_release_buf; + + u8 rx_fd_bits; + u32 tx_fifo_deq_pipeline_depth; + bool errata_A006320; + bool excessive_threshold_register; + bool fmbm_tfne_has_features; + + enum fman_port_dma_swap dma_swap_data; + enum fman_port_color color; +}; + +struct fman_port_rx_pools_params { + u8 num_of_pools; + u16 second_largest_buf_size; + u16 largest_buf_size; +}; + +struct fman_port_dts_params { + void __iomem *base_addr; /* FMan port virtual memory */ + enum fman_port_type type; /* Port type */ + u16 speed; /* Port speed */ + u8 id; /* HW Port Id */ + u32 qman_channel_id; /* QMan channel id (non RX only) */ + struct fman *fman; /* FMan Handle */ +}; + +struct fman_port { + void *fm; + struct device *dev; + struct fman_rev_info rev_info; + u8 port_id; + enum fman_port_type port_type; + u16 port_speed; + + union fman_port_bmi_regs __iomem *bmi_regs; + struct fman_port_qmi_regs __iomem *qmi_regs; + + struct fman_sp_buffer_offsets buffer_offsets; + + u8 internal_buf_offset; + struct fman_ext_pools ext_buf_pools; + + u16 max_frame_length; + struct fman_port_rsrc open_dmas; + struct fman_port_rsrc tasks; + struct fman_port_rsrc fifo_bufs; + struct fman_port_rx_pools_params rx_pools_params; + + struct fman_port_cfg *cfg; + struct fman_port_dts_params dts_params; + + u8 ext_pools_num; + u32 max_port_fifo_size; + u32 max_num_of_ext_pools; + u32 max_num_of_sub_portals; + u32 bm_max_num_of_pools; +}; + +static int init_bmi_rx(struct fman_port *port) +{ + struct fman_port_rx_bmi_regs __iomem *regs = &port->bmi_regs->rx; + struct fman_port_cfg *cfg = port->cfg; + u32 tmp; + + /* DMA attributes */ + tmp = (u32)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT; + /* Enable write optimization */ + tmp |= BMI_DMA_ATTR_WRITE_OPTIMIZE; + iowrite32be(tmp, ®s->fmbm_rda); + + /* Rx FIFO parameters */ + tmp = (cfg->rx_pri_elevation / PORT_BMI_FIFO_UNITS - 1) << + BMI_RX_FIFO_PRI_ELEVATION_SHIFT; + tmp |= cfg->rx_fifo_thr / PORT_BMI_FIFO_UNITS - 1; + iowrite32be(tmp, ®s->fmbm_rfp); + + if (cfg->excessive_threshold_register) + /* always allow access to the extra resources */ + iowrite32be(BMI_RX_FIFO_THRESHOLD_ETHE, ®s->fmbm_reth); + + /* Frame end data */ + tmp = (cfg->cheksum_last_bytes_ignore & BMI_FRAME_END_CS_IGNORE_MASK) << + BMI_FRAME_END_CS_IGNORE_SHIFT; + tmp |= (cfg->rx_cut_end_bytes & BMI_RX_FRAME_END_CUT_MASK) << + BMI_RX_FRAME_END_CUT_SHIFT; + if (cfg->errata_A006320) + tmp &= 0xffe0ffff; + iowrite32be(tmp, ®s->fmbm_rfed); + + /* Internal context parameters */ + tmp = ((cfg->int_context.ext_buf_offset / PORT_IC_OFFSET_UNITS) & + BMI_IC_TO_EXT_MASK) << BMI_IC_TO_EXT_SHIFT; + tmp |= ((cfg->int_context.int_context_offset / PORT_IC_OFFSET_UNITS) & + BMI_IC_FROM_INT_MASK) << BMI_IC_FROM_INT_SHIFT; + tmp |= (cfg->int_context.size / PORT_IC_OFFSET_UNITS) & + BMI_IC_SIZE_MASK; + iowrite32be(tmp, ®s->fmbm_ricp); + + /* Internal buffer offset */ + tmp = ((cfg->int_buf_start_margin / PORT_IC_OFFSET_UNITS) & + BMI_INT_BUF_MARG_MASK) << BMI_INT_BUF_MARG_SHIFT; + iowrite32be(tmp, ®s->fmbm_rim); + + /* External buffer margins */ + tmp = (cfg->buf_margins.start_margins & BMI_EXT_BUF_MARG_START_MASK) << + BMI_EXT_BUF_MARG_START_SHIFT; + tmp |= cfg->buf_margins.end_margins & BMI_EXT_BUF_MARG_END_MASK; + iowrite32be(tmp, ®s->fmbm_rebm); + + /* Frame attributes */ + tmp = BMI_CMD_RX_MR_DEF; + tmp |= BMI_CMD_ATTR_ORDER; + tmp |= (u32)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT; + /* Synchronization request */ + tmp |= BMI_CMD_ATTR_SYNC; + + iowrite32be(tmp, ®s->fmbm_rfca); + + /* NIA */ + tmp = (u32)cfg->rx_fd_bits << BMI_NEXT_ENG_FD_BITS_SHIFT; + + tmp |= NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME; + iowrite32be(tmp, ®s->fmbm_rfne); + + /* Enqueue NIA */ + iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR, ®s->fmbm_rfene); + + /* Default/error queues */ + iowrite32be((cfg->dflt_fqid & DFLT_FQ_ID), ®s->fmbm_rfqid); + iowrite32be((cfg->err_fqid & DFLT_FQ_ID), ®s->fmbm_refqid); + + /* Discard/error masks */ + iowrite32be(cfg->discard_mask, ®s->fmbm_rfsdm); + iowrite32be(cfg->err_mask, ®s->fmbm_rfsem); + + return 0; +} + +static int init_bmi_tx(struct fman_port *port) +{ + struct fman_port_tx_bmi_regs __iomem *regs = &port->bmi_regs->tx; + struct fman_port_cfg *cfg = port->cfg; + u32 tmp; + + /* Tx Configuration register */ + tmp = 0; + iowrite32be(tmp, ®s->fmbm_tcfg); + + /* DMA attributes */ + tmp = (u32)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT; + iowrite32be(tmp, ®s->fmbm_tda); + + /* Tx FIFO parameters */ + tmp = (cfg->tx_fifo_min_level / PORT_BMI_FIFO_UNITS) << + BMI_TX_FIFO_MIN_FILL_SHIFT; + tmp |= ((cfg->tx_fifo_deq_pipeline_depth - 1) & + BMI_FIFO_PIPELINE_DEPTH_MASK) << BMI_FIFO_PIPELINE_DEPTH_SHIFT; + tmp |= (cfg->tx_fifo_low_comf_level / PORT_BMI_FIFO_UNITS) - 1; + iowrite32be(tmp, ®s->fmbm_tfp); + + /* Frame end data */ + tmp = (cfg->cheksum_last_bytes_ignore & BMI_FRAME_END_CS_IGNORE_MASK) << + BMI_FRAME_END_CS_IGNORE_SHIFT; + iowrite32be(tmp, ®s->fmbm_tfed); + + /* Internal context parameters */ + tmp = ((cfg->int_context.ext_buf_offset / PORT_IC_OFFSET_UNITS) & + BMI_IC_TO_EXT_MASK) << BMI_IC_TO_EXT_SHIFT; + tmp |= ((cfg->int_context.int_context_offset / PORT_IC_OFFSET_UNITS) & + BMI_IC_FROM_INT_MASK) << BMI_IC_FROM_INT_SHIFT; + tmp |= (cfg->int_context.size / PORT_IC_OFFSET_UNITS) & + BMI_IC_SIZE_MASK; + iowrite32be(tmp, ®s->fmbm_ticp); + + /* Frame attributes */ + tmp = BMI_CMD_TX_MR_DEF; + tmp |= BMI_CMD_ATTR_ORDER; + tmp |= (u32)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT; + iowrite32be(tmp, ®s->fmbm_tfca); + + /* Dequeue NIA + enqueue NIA */ + iowrite32be(NIA_ENG_QMI_DEQ, ®s->fmbm_tfdne); + iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR, ®s->fmbm_tfene); + if (cfg->fmbm_tfne_has_features) + iowrite32be(!cfg->dflt_fqid ? + BMI_EBD_EN | NIA_BMI_AC_FETCH_ALL_FRAME : + NIA_BMI_AC_FETCH_ALL_FRAME, ®s->fmbm_tfne); + if (!cfg->dflt_fqid && cfg->dont_release_buf) { + iowrite32be(DFLT_FQ_ID, ®s->fmbm_tcfqid); + iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, + ®s->fmbm_tfene); + if (cfg->fmbm_tfne_has_features) + iowrite32be(ioread32be(®s->fmbm_tfne) & ~BMI_EBD_EN, + ®s->fmbm_tfne); + } + + /* Confirmation/error queues */ + if (cfg->dflt_fqid || !cfg->dont_release_buf) + iowrite32be(cfg->dflt_fqid & DFLT_FQ_ID, ®s->fmbm_tcfqid); + iowrite32be((cfg->err_fqid & DFLT_FQ_ID), ®s->fmbm_tefqid); + + return 0; +} + +static int init_qmi(struct fman_port *port) +{ + struct fman_port_qmi_regs __iomem *regs = port->qmi_regs; + struct fman_port_cfg *cfg = port->cfg; + u32 tmp; + + /* Rx port configuration */ + if (port->port_type == FMAN_PORT_TYPE_RX) { + /* Enqueue NIA */ + iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_RELEASE, ®s->fmqm_pnen); + return 0; + } + + /* Continue with Tx port configuration */ + if (port->port_type == FMAN_PORT_TYPE_TX) { + /* Enqueue NIA */ + iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, + ®s->fmqm_pnen); + /* Dequeue NIA */ + iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX, ®s->fmqm_pndn); + } + + /* Dequeue Configuration register */ + tmp = 0; + if (cfg->deq_high_priority) + tmp |= QMI_DEQ_CFG_PRI; + + switch (cfg->deq_type) { + case FMAN_PORT_DEQ_BY_PRI: + tmp |= QMI_DEQ_CFG_TYPE1; + break; + case FMAN_PORT_DEQ_ACTIVE_FQ: + tmp |= QMI_DEQ_CFG_TYPE2; + break; + case FMAN_PORT_DEQ_ACTIVE_FQ_NO_ICS: + tmp |= QMI_DEQ_CFG_TYPE3; + break; + default: + return -EINVAL; + } + + switch (cfg->deq_prefetch_option) { + case FMAN_PORT_DEQ_NO_PREFETCH: + break; + case FMAN_PORT_DEQ_PART_PREFETCH: + tmp |= QMI_DEQ_CFG_PREFETCH_PARTIAL; + break; + case FMAN_PORT_DEQ_FULL_PREFETCH: + tmp |= QMI_DEQ_CFG_PREFETCH_FULL; + break; + default: + return -EINVAL; + } + + tmp |= (cfg->deq_sp & QMI_DEQ_CFG_SP_MASK) << QMI_DEQ_CFG_SP_SHIFT; + tmp |= cfg->deq_byte_cnt; + iowrite32be(tmp, ®s->fmqm_pndc); + + return 0; +} + +static int init(struct fman_port *port) +{ + int err; + + /* Init BMI registers */ + switch (port->port_type) { + case FMAN_PORT_TYPE_RX: + err = init_bmi_rx(port); + break; + case FMAN_PORT_TYPE_TX: + err = init_bmi_tx(port); + break; + default: + return -EINVAL; + } + + if (err) + return err; + + /* Init QMI registers */ + err = init_qmi(port); + return err; + + return 0; +} + +static int set_bpools(const struct fman_port *port, + const struct fman_port_bpools *bp) +{ + u32 __iomem *bp_reg, *bp_depl_reg; + u32 tmp; + u8 i, max_bp_num; + bool grp_depl_used = false, rx_port; + + switch (port->port_type) { + case FMAN_PORT_TYPE_RX: + max_bp_num = port->ext_pools_num; + rx_port = true; + bp_reg = port->bmi_regs->rx.fmbm_ebmpi; + bp_depl_reg = &port->bmi_regs->rx.fmbm_mpd; + break; + default: + return -EINVAL; + } + + if (rx_port) { + /* Check buffers are provided in ascending order */ + for (i = 0; (i < (bp->count - 1) && + (i < FMAN_PORT_MAX_EXT_POOLS_NUM - 1)); i++) { + if (bp->bpool[i].size > bp->bpool[i + 1].size) + return -EINVAL; + } + } + + /* Set up external buffers pools */ + for (i = 0; i < bp->count; i++) { + tmp = BMI_EXT_BUF_POOL_VALID; + tmp |= ((u32)bp->bpool[i].bpid << + BMI_EXT_BUF_POOL_ID_SHIFT) & BMI_EXT_BUF_POOL_ID_MASK; + + if (rx_port) { + if (bp->counters_enable) + tmp |= BMI_EXT_BUF_POOL_EN_COUNTER; + + if (bp->bpool[i].is_backup) + tmp |= BMI_EXT_BUF_POOL_BACKUP; + + tmp |= (u32)bp->bpool[i].size; + } + + iowrite32be(tmp, &bp_reg[i]); + } + + /* Clear unused pools */ + for (i = bp->count; i < max_bp_num; i++) + iowrite32be(0, &bp_reg[i]); + + /* Pools depletion */ + tmp = 0; + for (i = 0; i < FMAN_PORT_MAX_EXT_POOLS_NUM; i++) { + if (bp->bpool[i].grp_bp_depleted) { + grp_depl_used = true; + tmp |= 0x80000000 >> i; + } + + if (bp->bpool[i].single_bp_depleted) + tmp |= 0x80 >> i; + } + + if (grp_depl_used) + tmp |= ((u32)bp->grp_bp_depleted_num - 1) << + BMI_POOL_DEP_NUM_OF_POOLS_SHIFT; + + iowrite32be(tmp, bp_depl_reg); + return 0; +} + +static bool is_init_done(struct fman_port_cfg *cfg) +{ + /* Checks if FMan port driver parameters were initialized */ + if (!cfg) + return true; + + return false; +} + +static int verify_size_of_fifo(struct fman_port *port) +{ + u32 min_fifo_size_required = 0, opt_fifo_size_for_b2b = 0; + + /* TX Ports */ + if (port->port_type == FMAN_PORT_TYPE_TX) { + min_fifo_size_required = (u32) + (roundup(port->max_frame_length, + FMAN_BMI_FIFO_UNITS) + (3 * FMAN_BMI_FIFO_UNITS)); + + min_fifo_size_required += + port->cfg->tx_fifo_deq_pipeline_depth * + FMAN_BMI_FIFO_UNITS; + + opt_fifo_size_for_b2b = min_fifo_size_required; + + /* Add some margin for back-to-back capability to improve + * performance, allows the hardware to pipeline new frame dma + * while the previous frame not yet transmitted. + */ + if (port->port_speed == 10000) + opt_fifo_size_for_b2b += 3 * FMAN_BMI_FIFO_UNITS; + else + opt_fifo_size_for_b2b += 2 * FMAN_BMI_FIFO_UNITS; + } + + /* RX Ports */ + else if (port->port_type == FMAN_PORT_TYPE_RX) { + if (port->rev_info.major >= 6) + min_fifo_size_required = (u32) + (roundup(port->max_frame_length, + FMAN_BMI_FIFO_UNITS) + + (5 * FMAN_BMI_FIFO_UNITS)); + /* 4 according to spec + 1 for FOF>0 */ + else + min_fifo_size_required = (u32) + (roundup(min(port->max_frame_length, + port->rx_pools_params.largest_buf_size), + FMAN_BMI_FIFO_UNITS) + + (7 * FMAN_BMI_FIFO_UNITS)); + + opt_fifo_size_for_b2b = min_fifo_size_required; + + /* Add some margin for back-to-back capability to improve + * performance,allows the hardware to pipeline new frame dma + * while the previous frame not yet transmitted. + */ + if (port->port_speed == 10000) + opt_fifo_size_for_b2b += 8 * FMAN_BMI_FIFO_UNITS; + else + opt_fifo_size_for_b2b += 3 * FMAN_BMI_FIFO_UNITS; + } + + WARN_ON(min_fifo_size_required <= 0); + WARN_ON(opt_fifo_size_for_b2b < min_fifo_size_required); + + /* Verify the size */ + if (port->fifo_bufs.num < min_fifo_size_required) + dev_dbg(port->dev, "%s: FIFO size should be enlarged to %d bytes\n", + __func__, min_fifo_size_required); + else if (port->fifo_bufs.num < opt_fifo_size_for_b2b) + dev_dbg(port->dev, "%s: For b2b processing,FIFO may be enlarged to %d bytes\n", + __func__, opt_fifo_size_for_b2b); + + return 0; +} + +static int set_ext_buffer_pools(struct fman_port *port) +{ + struct fman_ext_pools *ext_buf_pools = &port->cfg->ext_buf_pools; + struct fman_buf_pool_depletion *buf_pool_depletion = + &port->cfg->buf_pool_depletion; + u8 ordered_array[FMAN_PORT_MAX_EXT_POOLS_NUM]; + u16 sizes_array[BM_MAX_NUM_OF_POOLS]; + int i = 0, j = 0, err; + struct fman_port_bpools bpools; + + memset(&ordered_array, 0, sizeof(u8) * FMAN_PORT_MAX_EXT_POOLS_NUM); + memset(&sizes_array, 0, sizeof(u16) * BM_MAX_NUM_OF_POOLS); + memcpy(&port->ext_buf_pools, ext_buf_pools, + sizeof(struct fman_ext_pools)); + + fman_sp_set_buf_pools_in_asc_order_of_buf_sizes(ext_buf_pools, + ordered_array, + sizes_array); + + memset(&bpools, 0, sizeof(struct fman_port_bpools)); + bpools.count = ext_buf_pools->num_of_pools_used; + bpools.counters_enable = true; + for (i = 0; i < ext_buf_pools->num_of_pools_used; i++) { + bpools.bpool[i].bpid = ordered_array[i]; + bpools.bpool[i].size = sizes_array[ordered_array[i]]; + } + + /* save pools parameters for later use */ + port->rx_pools_params.num_of_pools = ext_buf_pools->num_of_pools_used; + port->rx_pools_params.largest_buf_size = + sizes_array[ordered_array[ext_buf_pools->num_of_pools_used - 1]]; + port->rx_pools_params.second_largest_buf_size = + sizes_array[ordered_array[ext_buf_pools->num_of_pools_used - 2]]; + + /* FMBM_RMPD reg. - pool depletion */ + if (buf_pool_depletion->pools_grp_mode_enable) { + bpools.grp_bp_depleted_num = buf_pool_depletion->num_of_pools; + for (i = 0; i < port->bm_max_num_of_pools; i++) { + if (buf_pool_depletion->pools_to_consider[i]) { + for (j = 0; j < ext_buf_pools-> + num_of_pools_used; j++) { + if (i == ordered_array[j]) { + bpools.bpool[j]. + grp_bp_depleted = true; + break; + } + } + } + } + } + + if (buf_pool_depletion->single_pool_mode_enable) { + for (i = 0; i < port->bm_max_num_of_pools; i++) { + if (buf_pool_depletion-> + pools_to_consider_for_single_mode[i]) { + for (j = 0; j < ext_buf_pools-> + num_of_pools_used; j++) { + if (i == ordered_array[j]) { + bpools.bpool[j]. + single_bp_depleted = true; + break; + } + } + } + } + } + + err = set_bpools(port, &bpools); + if (err != 0) { + dev_err(port->dev, "%s: set_bpools() failed\n", __func__); + return -EINVAL; + } + + return 0; +} + +static int init_low_level_driver(struct fman_port *port) +{ + struct fman_port_cfg *cfg = port->cfg; + u32 tmp_val; + + switch (port->port_type) { + case FMAN_PORT_TYPE_RX: + cfg->err_mask = (RX_ERRS_TO_ENQ & ~cfg->discard_mask); + break; + default: + break; + } + + tmp_val = (u32)((port->internal_buf_offset % OFFSET_UNITS) ? + (port->internal_buf_offset / OFFSET_UNITS + 1) : + (port->internal_buf_offset / OFFSET_UNITS)); + port->internal_buf_offset = (u8)(tmp_val * OFFSET_UNITS); + port->cfg->int_buf_start_margin = port->internal_buf_offset; + + if (init(port) != 0) { + dev_err(port->dev, "%s: fman port initialization failed\n", + __func__); + return -ENODEV; + } + + /* The code bellow is a trick so the FM will not release the buffer + * to BM nor will try to enqueue the frame to QM + */ + if (port->port_type == FMAN_PORT_TYPE_TX) { + if (!cfg->dflt_fqid && cfg->dont_release_buf) { + /* override fmbm_tcfqid 0 with a false non-0 value. + * This will force FM to act according to tfene. + * Otherwise, if fmbm_tcfqid is 0 the FM will release + * buffers to BM regardless of fmbm_tfene + */ + iowrite32be(0xFFFFFF, &port->bmi_regs->tx.fmbm_tcfqid); + iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, + &port->bmi_regs->tx.fmbm_tfene); + } + } + + return 0; +} + +static int fill_soc_specific_params(struct fman_port *port) +{ + u32 bmi_max_fifo_size; + + bmi_max_fifo_size = fman_get_bmi_max_fifo_size(port->fm); + port->max_port_fifo_size = MAX_PORT_FIFO_SIZE(bmi_max_fifo_size); + port->bm_max_num_of_pools = 64; + + /* P4080 - Major 2 + * P2041/P3041/P5020/P5040 - Major 3 + * Tx/Bx - Major 6 + */ + switch (port->rev_info.major) { + case 2: + case 3: + port->max_num_of_ext_pools = 4; + port->max_num_of_sub_portals = 12; + break; + + case 6: + port->max_num_of_ext_pools = 8; + port->max_num_of_sub_portals = 16; + break; + + default: + dev_err(port->dev, "%s: Unsupported FMan version\n", __func__); + return -EINVAL; + } + + return 0; +} + +static int get_dflt_fifo_deq_pipeline_depth(u8 major, enum fman_port_type type, + u16 speed) +{ + switch (type) { + case FMAN_PORT_TYPE_RX: + case FMAN_PORT_TYPE_TX: + switch (speed) { + case 10000: + return 4; + case 1000: + if (major >= 6) + return 2; + else + return 1; + default: + return 0; + } + default: + return 0; + } +} + +static int get_dflt_num_of_tasks(u8 major, enum fman_port_type type, + u16 speed) +{ + switch (type) { + case FMAN_PORT_TYPE_RX: + case FMAN_PORT_TYPE_TX: + switch (speed) { + case 10000: + return 16; + case 1000: + if (major >= 6) + return 4; + else + return 3; + default: + return 0; + } + default: + return 0; + } +} + +static int get_dflt_extra_num_of_tasks(u8 major, enum fman_port_type type, + u16 speed) +{ + switch (type) { + case FMAN_PORT_TYPE_RX: + /* FMan V3 */ + if (major >= 6) + return 0; + + /* FMan V2 */ + if (speed == 10000) + return 8; + else + return 2; + case FMAN_PORT_TYPE_TX: + default: + return 0; + } +} + +static int get_dflt_num_of_open_dmas(u8 major, enum fman_port_type type, + u16 speed) +{ + int val; + + if (major >= 6) { + switch (type) { + case FMAN_PORT_TYPE_TX: + if (speed == 10000) + val = 12; + else + val = 3; + break; + case FMAN_PORT_TYPE_RX: + if (speed == 10000) + val = 8; + else + val = 2; + break; + default: + return 0; + } + } else { + switch (type) { + case FMAN_PORT_TYPE_TX: + case FMAN_PORT_TYPE_RX: + if (speed == 10000) + val = 8; + else + val = 1; + break; + default: + val = 0; + } + } + + return val; +} + +static int get_dflt_extra_num_of_open_dmas(u8 major, enum fman_port_type type, + u16 speed) +{ + /* FMan V3 */ + if (major >= 6) + return 0; + + /* FMan V2 */ + switch (type) { + case FMAN_PORT_TYPE_RX: + case FMAN_PORT_TYPE_TX: + if (speed == 10000) + return 8; + else + return 1; + default: + return 0; + } +} + +static int get_dflt_num_of_fifo_bufs(u8 major, enum fman_port_type type, + u16 speed) +{ + int val; + + if (major >= 6) { + switch (type) { + case FMAN_PORT_TYPE_TX: + if (speed == 10000) + val = 64; + else + val = 50; + break; + case FMAN_PORT_TYPE_RX: + if (speed == 10000) + val = 96; + else + val = 50; + break; + default: + val = 0; + } + } else { + switch (type) { + case FMAN_PORT_TYPE_TX: + if (speed == 10000) + val = 48; + else + val = 44; + break; + case FMAN_PORT_TYPE_RX: + if (speed == 10000) + val = 48; + else + val = 45; + break; + default: + val = 0; + } + } + + return val; +} + +static void set_dflt_cfg(struct fman_port *port, + struct fman_port_params *port_params) +{ + struct fman_port_cfg *cfg = port->cfg; + + cfg->dma_swap_data = FMAN_PORT_DMA_NO_SWAP; + cfg->color = FMAN_PORT_COLOR_GREEN; + cfg->rx_cut_end_bytes = DFLT_PORT_CUT_BYTES_FROM_END; + cfg->rx_pri_elevation = BMI_PRIORITY_ELEVATION_LEVEL; + cfg->rx_fifo_thr = BMI_FIFO_THRESHOLD; + cfg->tx_fifo_low_comf_level = (5 * 1024); + cfg->deq_type = FMAN_PORT_DEQ_BY_PRI; + cfg->deq_prefetch_option = FMAN_PORT_DEQ_FULL_PREFETCH; + cfg->tx_fifo_deq_pipeline_depth = + BMI_DEQUEUE_PIPELINE_DEPTH(port->port_type, port->port_speed); + cfg->deq_byte_cnt = QMI_BYTE_COUNT_LEVEL_CONTROL(port->port_type); + + cfg->rx_pri_elevation = + DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(port->max_port_fifo_size); + port->cfg->rx_fifo_thr = + DFLT_PORT_RX_FIFO_THRESHOLD(port->rev_info.major, + port->max_port_fifo_size); + + if ((port->rev_info.major == 6) && + ((port->rev_info.minor == 0) || (port->rev_info.minor == 3))) + cfg->errata_A006320 = true; + + /* Excessive Threshold register - exists for pre-FMv3 chips only */ + if (port->rev_info.major < 6) + cfg->excessive_threshold_register = true; + else + cfg->fmbm_tfne_has_features = true; + + cfg->buffer_prefix_content.data_align = + DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN; +} + +static void set_rx_dflt_cfg(struct fman_port *port, + struct fman_port_params *port_params) +{ + port->cfg->discard_mask = DFLT_PORT_ERRORS_TO_DISCARD; + + memcpy(&port->cfg->ext_buf_pools, + &port_params->specific_params.rx_params.ext_buf_pools, + sizeof(struct fman_ext_pools)); + port->cfg->err_fqid = + port_params->specific_params.rx_params.err_fqid; + port->cfg->dflt_fqid = + port_params->specific_params.rx_params.dflt_fqid; +} + +static void set_tx_dflt_cfg(struct fman_port *port, + struct fman_port_params *port_params, + struct fman_port_dts_params *dts_params) +{ + port->cfg->tx_fifo_deq_pipeline_depth = + get_dflt_fifo_deq_pipeline_depth(port->rev_info.major, + port->port_type, + port->port_speed); + port->cfg->err_fqid = + port_params->specific_params.non_rx_params.err_fqid; + port->cfg->deq_sp = + (u8)(dts_params->qman_channel_id & QMI_DEQ_CFG_SUBPORTAL_MASK); + port->cfg->dflt_fqid = + port_params->specific_params.non_rx_params.dflt_fqid; + port->cfg->deq_high_priority = true; +} + +/** + * fman_port_config + * @port: Pointer to the port structure + * @params: Pointer to data structure of parameters + * + * Creates a descriptor for the FM PORT module. + * The routine returns a pointer to the FM PORT object. + * This descriptor must be passed as first parameter to all other FM PORT + * function calls. + * No actual initialization or configuration of FM hardware is done by this + * routine. + * + * Return: 0 on success; Error code otherwise. + */ +int fman_port_config(struct fman_port *port, struct fman_port_params *params) +{ + void __iomem *base_addr = port->dts_params.base_addr; + int err; + + /* Allocate the FM driver's parameters structure */ + port->cfg = kzalloc(sizeof(*port->cfg), GFP_KERNEL); + if (!port->cfg) + goto err_params; + + /* Initialize FM port parameters which will be kept by the driver */ + port->port_type = port->dts_params.type; + port->port_speed = port->dts_params.speed; + port->port_id = port->dts_params.id; + port->fm = port->dts_params.fman; + port->ext_pools_num = (u8)8; + + /* get FM revision */ + fman_get_revision(port->fm, &port->rev_info); + + err = fill_soc_specific_params(port); + if (err) + goto err_port_cfg; + + switch (port->port_type) { + case FMAN_PORT_TYPE_RX: + set_rx_dflt_cfg(port, params); + case FMAN_PORT_TYPE_TX: + set_tx_dflt_cfg(port, params, &port->dts_params); + default: + set_dflt_cfg(port, params); + } + + /* Continue with other parameters */ + /* set memory map pointers */ + port->bmi_regs = base_addr + BMI_PORT_REGS_OFFSET; + port->qmi_regs = base_addr + QMI_PORT_REGS_OFFSET; + + port->max_frame_length = DFLT_PORT_MAX_FRAME_LENGTH; + /* resource distribution. */ + + port->fifo_bufs.num = + get_dflt_num_of_fifo_bufs(port->rev_info.major, port->port_type, + port->port_speed) * FMAN_BMI_FIFO_UNITS; + port->fifo_bufs.extra = + DFLT_PORT_EXTRA_NUM_OF_FIFO_BUFS * FMAN_BMI_FIFO_UNITS; + + port->open_dmas.num = + get_dflt_num_of_open_dmas(port->rev_info.major, + port->port_type, port->port_speed); + port->open_dmas.extra = + get_dflt_extra_num_of_open_dmas(port->rev_info.major, + port->port_type, port->port_speed); + port->tasks.num = + get_dflt_num_of_tasks(port->rev_info.major, + port->port_type, port->port_speed); + port->tasks.extra = + get_dflt_extra_num_of_tasks(port->rev_info.major, + port->port_type, port->port_speed); + + /* FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981 errata + * workaround + */ + if ((port->rev_info.major == 6) && (port->rev_info.minor == 0) && + (((port->port_type == FMAN_PORT_TYPE_TX) && + (port->port_speed == 1000)))) { + port->open_dmas.num = 16; + port->open_dmas.extra = 0; + } + + if (port->rev_info.major >= 6 && + port->port_type == FMAN_PORT_TYPE_TX && + port->port_speed == 1000) { + /* FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127 Errata + * workaround + */ + if (port->rev_info.major >= 6) { + u32 reg; + + reg = 0x00001013; + iowrite32be(reg, &port->bmi_regs->tx.fmbm_tfp); + } + } + + return 0; + +err_port_cfg: + kfree(port->cfg); +err_params: + kfree(port); + return -EINVAL; +} +EXPORT_SYMBOL(fman_port_config); + +/** + * fman_port_init + * port: A pointer to a FM Port module. + * Initializes the FM PORT module by defining the software structure and + * configuring the hardware registers. + * + * Return: 0 on success; Error code otherwise. + */ +int fman_port_init(struct fman_port *port) +{ + struct fman_port_cfg *cfg; + int err; + struct fman_port_init_params params; + + if (is_init_done(port->cfg)) + return -EINVAL; + + err = fman_sp_build_buffer_struct(&port->cfg->int_context, + &port->cfg->buffer_prefix_content, + &port->cfg->buf_margins, + &port->buffer_offsets, + &port->internal_buf_offset); + if (err) + return err; + + cfg = port->cfg; + + if (port->port_type == FMAN_PORT_TYPE_RX) { + /* Call the external Buffer routine which also checks fifo + * size and updates it if necessary + */ + /* define external buffer pools and pool depletion */ + err = set_ext_buffer_pools(port); + if (err) + return err; + /* check if the largest external buffer pool is large enough */ + if (cfg->buf_margins.start_margins + MIN_EXT_BUF_SIZE + + cfg->buf_margins.end_margins > + port->rx_pools_params.largest_buf_size) { + dev_err(port->dev, "%s: buf_margins.start_margins (%d) + minimum buf size (64) + buf_margins.end_margins (%d) is larger than maximum external buffer size (%d)\n", + __func__, cfg->buf_margins.start_margins, + cfg->buf_margins.end_margins, + port->rx_pools_params.largest_buf_size); + return -EINVAL; + } + } + + /* Call FM module routine for communicating parameters */ + memset(¶ms, 0, sizeof(params)); + params.port_id = port->port_id; + params.port_type = port->port_type; + params.port_speed = port->port_speed; + params.num_of_tasks = (u8)port->tasks.num; + params.num_of_extra_tasks = (u8)port->tasks.extra; + params.num_of_open_dmas = (u8)port->open_dmas.num; + params.num_of_extra_open_dmas = (u8)port->open_dmas.extra; + + if (port->fifo_bufs.num) { + err = verify_size_of_fifo(port); + if (err) + return err; + } + params.size_of_fifo = port->fifo_bufs.num; + params.extra_size_of_fifo = port->fifo_bufs.extra; + params.deq_pipeline_depth = port->cfg->tx_fifo_deq_pipeline_depth; + params.max_frame_length = port->max_frame_length; + + err = fman_set_port_params(port->fm, ¶ms); + if (err) + return err; + + err = init_low_level_driver(port); + if (err) + return err; + + kfree(port->cfg); + port->cfg = NULL; + + return 0; +} +EXPORT_SYMBOL(fman_port_init); + +/** + * fman_port_cfg_buf_prefix_content + * @port A pointer to a FM Port module. + * @buffer_prefix_content A structure of parameters describing + * the structure of the buffer. + * Out parameter: + * Start margin - offset of data from + * start of external buffer. + * Defines the structure, size and content of the application buffer. + * The prefix, in Tx ports, if 'pass_prs_result', the application should set + * a value to their offsets in the prefix of the FM will save the first + * 'priv_data_size', than, depending on 'pass_prs_result' and + * 'pass_time_stamp', copy parse result and timeStamp, and the packet itself + * (in this order), to the application buffer, and to offset. + * Calling this routine changes the buffer margins definitions in the internal + * driver data base from its default configuration: + * Data size: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PRIV_DATA_SIZE] + * Pass Parser result: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_PRS_RESULT]. + * Pass timestamp: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_TIME_STAMP]. + * May be used for all ports + * + * Allowed only following fman_port_config() and before fman_port_init(). + * + * Return: 0 on success; Error code otherwise. + */ +int fman_port_cfg_buf_prefix_content(struct fman_port *port, + struct fman_buffer_prefix_content * + buffer_prefix_content) +{ + if (is_init_done(port->cfg)) + return -EINVAL; + + memcpy(&port->cfg->buffer_prefix_content, + buffer_prefix_content, + sizeof(struct fman_buffer_prefix_content)); + /* if data_align was not initialized by user, + * we return to driver's default + */ + if (!port->cfg->buffer_prefix_content.data_align) + port->cfg->buffer_prefix_content.data_align = + DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN; + + return 0; +} +EXPORT_SYMBOL(fman_port_cfg_buf_prefix_content); + +/** + * fman_port_disable + * port: A pointer to a FM Port module. + * + * Gracefully disable an FM port. The port will not start new tasks after all + * tasks associated with the port are terminated. + * + * This is a blocking routine, it returns after port is gracefully stopped, + * i.e. the port will not except new frames, but it will finish all frames + * or tasks which were already began. + * Allowed only following fman_port_init(). + * + * Return: 0 on success; Error code otherwise. + */ +int fman_port_disable(struct fman_port *port) +{ + u32 __iomem *bmi_cfg_reg, *bmi_status_reg, tmp; + bool rx_port, failure = false; + int count; + + if (!is_init_done(port->cfg)) + return -EINVAL; + + switch (port->port_type) { + case FMAN_PORT_TYPE_RX: + bmi_cfg_reg = &port->bmi_regs->rx.fmbm_rcfg; + bmi_status_reg = &port->bmi_regs->rx.fmbm_rst; + rx_port = true; + break; + case FMAN_PORT_TYPE_TX: + bmi_cfg_reg = &port->bmi_regs->tx.fmbm_tcfg; + bmi_status_reg = &port->bmi_regs->tx.fmbm_tst; + rx_port = false; + break; + default: + return -EINVAL; + } + + /* Disable QMI */ + if (!rx_port) { + tmp = ioread32be(&port->qmi_regs->fmqm_pnc) & ~QMI_PORT_CFG_EN; + iowrite32be(tmp, &port->qmi_regs->fmqm_pnc); + + /* Wait for QMI to finish FD handling */ + count = 100; + do { + udelay(10); + tmp = ioread32be(&port->qmi_regs->fmqm_pns); + } while ((tmp & QMI_PORT_STATUS_DEQ_FD_BSY) && --count); + + if (count == 0) { + /* Timeout */ + failure = true; + } + } + + /* Disable BMI */ + tmp = ioread32be(bmi_cfg_reg) & ~BMI_PORT_CFG_EN; + iowrite32be(tmp, bmi_cfg_reg); + + /* Wait for graceful stop end */ + count = 500; + do { + udelay(10); + tmp = ioread32be(bmi_status_reg); + } while ((tmp & BMI_PORT_STATUS_BSY) && --count); + + if (count == 0) { + /* Timeout */ + failure = true; + } + + if (failure) + dev_dbg(port->dev, "%s: FMan Port[%d]: BMI or QMI is Busy. Port forced down\n", + __func__, port->port_id); + + return 0; +} +EXPORT_SYMBOL(fman_port_disable); + +/** + * fman_port_enable + * port: A pointer to a FM Port module. + * + * A runtime routine provided to allow disable/enable of port. + * + * Allowed only following fman_port_init(). + * + * Return: 0 on success; Error code otherwise. + */ +int fman_port_enable(struct fman_port *port) +{ + u32 __iomem *bmi_cfg_reg, tmp; + bool rx_port; + + if (!is_init_done(port->cfg)) + return -EINVAL; + + switch (port->port_type) { + case FMAN_PORT_TYPE_RX: + bmi_cfg_reg = &port->bmi_regs->rx.fmbm_rcfg; + rx_port = true; + break; + case FMAN_PORT_TYPE_TX: + bmi_cfg_reg = &port->bmi_regs->tx.fmbm_tcfg; + rx_port = false; + break; + default: + return -EINVAL; + } + + /* Enable QMI */ + if (!rx_port) { + tmp = ioread32be(&port->qmi_regs->fmqm_pnc) | QMI_PORT_CFG_EN; + iowrite32be(tmp, &port->qmi_regs->fmqm_pnc); + } + + /* Enable BMI */ + tmp = ioread32be(bmi_cfg_reg) | BMI_PORT_CFG_EN; + iowrite32be(tmp, bmi_cfg_reg); + + return 0; +} +EXPORT_SYMBOL(fman_port_enable); + +/** + * fman_port_bind + * dev: FMan Port OF device pointer + * + * Bind to a specific FMan Port. + * + * Allowed only after the port was created. + * + * Return: A pointer to the FMan port device. + */ +struct fman_port *fman_port_bind(struct device *dev) +{ + return (struct fman_port *)(dev_get_drvdata(get_device(dev))); +} +EXPORT_SYMBOL(fman_port_bind); + +/** + * fman_port_get_qman_channel_id + * port: Pointer to the FMan port devuce + * + * Get the QMan channel ID for the specific port + * + * Return: QMan channel ID + */ +u32 fman_port_get_qman_channel_id(struct fman_port *port) +{ + return port->dts_params.qman_channel_id; +} +EXPORT_SYMBOL(fman_port_get_qman_channel_id); + +static int fman_port_probe(struct platform_device *of_dev) +{ + struct fman_port *port; + struct fman *fman; + struct device_node *fm_node, *port_node; + struct resource res; + struct resource *dev_res; + const u32 *u32_prop; + int err = 0, lenp; + enum fman_port_type port_type; + u16 port_speed; + u8 port_id; + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->dev = &of_dev->dev; + + port_node = of_node_get(of_dev->dev.of_node); + + /* Get the FM node */ + fm_node = of_get_parent(port_node); + if (!fm_node) { + dev_err(port->dev, "%s: of_get_parent() failed\n", __func__); + err = -ENODEV; + goto return_err; + } + + fman = dev_get_drvdata(&of_find_device_by_node(fm_node)->dev); + of_node_put(fm_node); + if (!fman) { + err = -EINVAL; + goto return_err; + } + + u32_prop = (const u32 *)of_get_property(port_node, "cell-index", &lenp); + if (!u32_prop) { + dev_err(port->dev, "%s: of_get_property(%s, cell-index) failed\n", + __func__, port_node->full_name); + err = -EINVAL; + goto return_err; + } + if (WARN_ON(lenp != sizeof(u32))) { + err = -EINVAL; + goto return_err; + } + port_id = (u8)fdt32_to_cpu(u32_prop[0]); + + port->dts_params.id = port_id; + + if (of_device_is_compatible(port_node, "fsl,fman-v3-port-tx")) { + port_type = FMAN_PORT_TYPE_TX; + port_speed = 1000; + u32_prop = (const u32 *)of_get_property(port_node, + "fsl,fman-10g-port", + &lenp); + if (u32_prop) + port_speed = 10000; + + } else if (of_device_is_compatible(port_node, "fsl,fman-v2-port-tx")) { + if (port_id >= TX_10G_PORT_BASE) + port_speed = 10000; + else + port_speed = 1000; + port_type = FMAN_PORT_TYPE_TX; + + } else if (of_device_is_compatible(port_node, "fsl,fman-v3-port-rx")) { + port_type = FMAN_PORT_TYPE_RX; + port_speed = 1000; + u32_prop = (const u32 *)of_get_property(port_node, + "fsl,fman-10g-port", &lenp); + if (u32_prop) + port_speed = 10000; + + } else if (of_device_is_compatible(port_node, "fsl,fman-v2-port-rx")) { + if (port_id >= RX_10G_PORT_BASE) + port_speed = 10000; + else + port_speed = 1000; + port_type = FMAN_PORT_TYPE_RX; + + } else { + dev_err(port->dev, "%s: Illegal port type\n", __func__); + err = -EINVAL; + goto return_err; + } + + port->dts_params.type = port_type; + port->dts_params.speed = port_speed; + + if (port_type == FMAN_PORT_TYPE_TX) { + u32 qman_channel_id; + + qman_channel_id = fman_get_qman_channel_id(fman, port_id); + if (qman_channel_id == 0) { + dev_err(port->dev, "%s: incorrect qman-channel-id\n", + __func__); + err = -EINVAL; + goto return_err; + } + port->dts_params.qman_channel_id = qman_channel_id; + } + + err = of_address_to_resource(port_node, 0, &res); + if (err < 0) { + dev_err(port->dev, "%s: of_address_to_resource() failed\n", + __func__); + err = -ENOMEM; + goto return_err; + } + + port->dts_params.fman = fman; + + of_node_put(port_node); + + dev_res = __devm_request_region(port->dev, &res, res.start, + resource_size(&res), "fman-port"); + if (!dev_res) { + dev_err(port->dev, "%s: __devm_request_region() failed\n", + __func__); + err = -EINVAL; + goto free_port; + } + + port->dts_params.base_addr = devm_ioremap(port->dev, res.start, + resource_size(&res)); + if (port->dts_params.base_addr == 0) + dev_err(port->dev, "%s: devm_ioremap() failed\n", __func__); + + dev_set_drvdata(&of_dev->dev, port); + + return 0; + +return_err: + of_node_put(port_node); +free_port: + kfree(port); + return err; +} + +static const struct of_device_id fman_port_match[] = { + {.compatible = "fsl,fman-v3-port-rx"}, + {.compatible = "fsl,fman-v2-port-rx"}, + {.compatible = "fsl,fman-v3-port-tx"}, + {.compatible = "fsl,fman-v2-port-tx"}, + {} +}; + +MODULE_DEVICE_TABLE(of, fman_port_match); + +static struct platform_driver fman_port_driver = { + .driver = { + .name = "fsl-fman-port", + .of_match_table = fman_port_match, + }, + .probe = fman_port_probe, +}; + +builtin_platform_driver(fman_port_driver); diff --git a/drivers/net/ethernet/freescale/fman/fman_port.h b/drivers/net/ethernet/freescale/fman/fman_port.h new file mode 100644 index 000000000000..8ba901737048 --- /dev/null +++ b/drivers/net/ethernet/freescale/fman/fman_port.h @@ -0,0 +1,151 @@ +/* + * Copyright 2008 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __FMAN_PORT_H +#define __FMAN_PORT_H + +#include "fman.h" + +/* FM Port API + * The FM uses a general module called "port" to represent a Tx port (MAC), + * an Rx port (MAC). + * The number of ports in an FM varies between SOCs. + * The SW driver manages these ports as sub-modules of the FM,i.e. after an + * FM is initialized, its ports may be initialized and operated upon. + * The port is initialized aware of its type, but other functions on a port + * may be indifferent to its type. When necessary, the driver verifies + * coherence and returns error if applicable. + * On initialization, user specifies the port type and it's index (relative + * to the port's type) - always starting at 0. + */ + +/* FM Frame error */ +/* Frame Descriptor errors */ +/* Not for Rx-Port! Unsupported Format */ +#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT FM_FD_ERR_UNSUPPORTED_FORMAT +/* Not for Rx-Port! Length Error */ +#define FM_PORT_FRM_ERR_LENGTH FM_FD_ERR_LENGTH +/* DMA Data error */ +#define FM_PORT_FRM_ERR_DMA FM_FD_ERR_DMA +/* non Frame-Manager error; probably come from SEC that was chained to FM */ +#define FM_PORT_FRM_ERR_NON_FM FM_FD_RX_STATUS_ERR_NON_FM + /* IPR error */ +#define FM_PORT_FRM_ERR_IPRE (FM_FD_ERR_IPR & ~FM_FD_IPR) +/* IPR non-consistent-sp */ +#define FM_PORT_FRM_ERR_IPR_NCSP (FM_FD_ERR_IPR_NCSP & \ + ~FM_FD_IPR) + +/* Rx FIFO overflow, FCS error, code error, running disparity + * error (SGMII and TBI modes), FIFO parity error. + * PHY Sequence error, PHY error control character detected. + */ +#define FM_PORT_FRM_ERR_PHYSICAL FM_FD_ERR_PHYSICAL +/* Frame too long OR Frame size exceeds max_length_frame */ +#define FM_PORT_FRM_ERR_SIZE FM_FD_ERR_SIZE +/* indicates a classifier "drop" operation */ +#define FM_PORT_FRM_ERR_CLS_DISCARD FM_FD_ERR_CLS_DISCARD +/* Extract Out of Frame */ +#define FM_PORT_FRM_ERR_EXTRACTION FM_FD_ERR_EXTRACTION +/* No Scheme Selected */ +#define FM_PORT_FRM_ERR_NO_SCHEME FM_FD_ERR_NO_SCHEME +/* Keysize Overflow */ +#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW FM_FD_ERR_KEYSIZE_OVERFLOW +/* Frame color is red */ +#define FM_PORT_FRM_ERR_COLOR_RED FM_FD_ERR_COLOR_RED +/* Frame color is yellow */ +#define FM_PORT_FRM_ERR_COLOR_YELLOW FM_FD_ERR_COLOR_YELLOW +/* Parser Time out Exceed */ +#define FM_PORT_FRM_ERR_PRS_TIMEOUT FM_FD_ERR_PRS_TIMEOUT +/* Invalid Soft Parser instruction */ +#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT FM_FD_ERR_PRS_ILL_INSTRUCT +/* Header error was identified during parsing */ +#define FM_PORT_FRM_ERR_PRS_HDR_ERR FM_FD_ERR_PRS_HDR_ERR +/* Frame parsed beyind 256 first bytes */ +#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED FM_FD_ERR_BLOCK_LIMIT_EXCEEDED +/* FPM Frame Processing Timeout Exceeded */ +#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT 0x00000001 + +struct fman_port; + +/* A structure for additional Rx port parameters */ +struct fman_port_rx_params { + u32 err_fqid; /* Error Queue Id. */ + u32 dflt_fqid; /* Default Queue Id. */ + /* Which external buffer pools are used + * (up to FMAN_PORT_MAX_EXT_POOLS_NUM), and their sizes. + */ + struct fman_ext_pools ext_buf_pools; +}; + +/* A structure for additional non-Rx port parameters */ +struct fman_port_non_rx_params { + /* Error Queue Id. */ + u32 err_fqid; + /* For Tx - Default Confirmation queue, 0 means no Tx confirmation + * for processed frames. For OP port - default Rx queue. + */ + u32 dflt_fqid; +}; + +/* A union for additional parameters depending on port type */ +union fman_port_specific_params { + /* Rx port parameters structure */ + struct fman_port_rx_params rx_params; + /* Non-Rx port parameters structure */ + struct fman_port_non_rx_params non_rx_params; +}; + +/* A structure representing FM initialization parameters */ +struct fman_port_params { + /* Virtual Address of memory mapped FM Port registers. */ + void *fm; + union fman_port_specific_params specific_params; + /* Additional parameters depending on port type. */ +}; + +int fman_port_config(struct fman_port *port, struct fman_port_params *params); + +int fman_port_init(struct fman_port *port); + +int fman_port_cfg_buf_prefix_content(struct fman_port *port, + struct fman_buffer_prefix_content + *buffer_prefix_content); + +int fman_port_disable(struct fman_port *port); + +int fman_port_enable(struct fman_port *port); + +u32 fman_port_get_qman_channel_id(struct fman_port *port); + +struct fman_port *fman_port_bind(struct device *dev); + +#endif /* __FMAN_PORT_H */ |