diff options
Diffstat (limited to 'drivers/net/ethernet/apple/mace.h')
-rw-r--r-- | drivers/net/ethernet/apple/mace.h | 173 |
1 files changed, 173 insertions, 0 deletions
diff --git a/drivers/net/ethernet/apple/mace.h b/drivers/net/ethernet/apple/mace.h new file mode 100644 index 000000000000..30b7ec0cedb5 --- /dev/null +++ b/drivers/net/ethernet/apple/mace.h @@ -0,0 +1,173 @@ +/* + * mace.h - definitions for the registers in the Am79C940 MACE + * (Medium Access Control for Ethernet) controller. + * + * Copyright (C) 1996 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define REG(x) volatile unsigned char x; char x ## _pad[15] + +struct mace { + REG(rcvfifo); /* receive FIFO */ + REG(xmtfifo); /* transmit FIFO */ + REG(xmtfc); /* transmit frame control */ + REG(xmtfs); /* transmit frame status */ + REG(xmtrc); /* transmit retry count */ + REG(rcvfc); /* receive frame control */ + REG(rcvfs); /* receive frame status (4 bytes) */ + REG(fifofc); /* FIFO frame count */ + REG(ir); /* interrupt register */ + REG(imr); /* interrupt mask register */ + REG(pr); /* poll register */ + REG(biucc); /* bus interface unit config control */ + REG(fifocc); /* FIFO configuration control */ + REG(maccc); /* medium access control config control */ + REG(plscc); /* phys layer signalling config control */ + REG(phycc); /* physical configuration control */ + REG(chipid_lo); /* chip ID, lsb */ + REG(chipid_hi); /* chip ID, msb */ + REG(iac); /* internal address config */ + REG(reg19); + REG(ladrf); /* logical address filter (8 bytes) */ + REG(padr); /* physical address (6 bytes) */ + REG(reg22); + REG(reg23); + REG(mpc); /* missed packet count (clears when read) */ + REG(reg25); + REG(rntpc); /* runt packet count (clears when read) */ + REG(rcvcc); /* recv collision count (clears when read) */ + REG(reg28); + REG(utr); /* user test reg */ + REG(reg30); + REG(reg31); +}; + +/* Bits in XMTFC */ +#define DRTRY 0x80 /* don't retry transmission after collision */ +#define DXMTFCS 0x08 /* don't append FCS to transmitted frame */ +#define AUTO_PAD_XMIT 0x01 /* auto-pad short packets on transmission */ + +/* Bits in XMTFS: only valid when XMTSV is set in PR and XMTFS */ +#define XMTSV 0x80 /* transmit status (i.e. XMTFS) valid */ +#define UFLO 0x40 /* underflow - xmit fifo ran dry */ +#define LCOL 0x20 /* late collision (transmission aborted) */ +#define MORE 0x10 /* 2 or more retries needed to xmit frame */ +#define ONE 0x08 /* 1 retry needed to xmit frame */ +#define DEFER 0x04 /* MACE had to defer xmission (enet busy) */ +#define LCAR 0x02 /* loss of carrier (transmission aborted) */ +#define RTRY 0x01 /* too many retries (transmission aborted) */ + +/* Bits in XMTRC: only valid when XMTSV is set in PR (and XMTFS) */ +#define EXDEF 0x80 /* had to defer for excessive time */ +#define RETRY_MASK 0x0f /* number of retries (0 - 15) */ + +/* Bits in RCVFC */ +#define LLRCV 0x08 /* low latency receive: early DMA request */ +#define M_RBAR 0x04 /* sets function of EAM/R pin */ +#define AUTO_STRIP_RCV 0x01 /* auto-strip short LLC frames on recv */ + +/* + * Bits in RCVFS. After a frame is received, four bytes of status + * are automatically read from this register and appended to the frame + * data in memory. These are: + * Byte 0 and 1: message byte count and frame status + * Byte 2: runt packet count + * Byte 3: receive collision count + */ +#define RS_OFLO 0x8000 /* receive FIFO overflowed */ +#define RS_CLSN 0x4000 /* received frame suffered (late) collision */ +#define RS_FRAMERR 0x2000 /* framing error flag */ +#define RS_FCSERR 0x1000 /* frame had FCS error */ +#define RS_COUNT 0x0fff /* mask for byte count field */ + +/* Bits (fields) in FIFOFC */ +#define RCVFC_SH 4 /* receive frame count in FIFO */ +#define RCVFC_MASK 0x0f +#define XMTFC_SH 0 /* transmit frame count in FIFO */ +#define XMTFC_MASK 0x0f + +/* + * Bits in IR and IMR. The IR clears itself when read. + * Setting a bit in the IMR will disable the corresponding interrupt. + */ +#define JABBER 0x80 /* jabber error - 10baseT xmission too long */ +#define BABBLE 0x40 /* babble - xmitter xmitting for too long */ +#define CERR 0x20 /* collision err - no SQE test (heartbeat) */ +#define RCVCCO 0x10 /* RCVCC overflow */ +#define RNTPCO 0x08 /* RNTPC overflow */ +#define MPCO 0x04 /* MPC overflow */ +#define RCVINT 0x02 /* receive interrupt */ +#define XMTINT 0x01 /* transmitter interrupt */ + +/* Bits in PR */ +#define XMTSV 0x80 /* XMTFS valid (same as in XMTFS) */ +#define TDTREQ 0x40 /* set when xmit fifo is requesting data */ +#define RDTREQ 0x20 /* set when recv fifo requests data xfer */ + +/* Bits in BIUCC */ +#define BSWP 0x40 /* byte swap, i.e. big-endian bus */ +#define XMTSP_4 0x00 /* start xmitting when 4 bytes in FIFO */ +#define XMTSP_16 0x10 /* start xmitting when 16 bytes in FIFO */ +#define XMTSP_64 0x20 /* start xmitting when 64 bytes in FIFO */ +#define XMTSP_112 0x30 /* start xmitting when 112 bytes in FIFO */ +#define SWRST 0x01 /* software reset */ + +/* Bits in FIFOCC */ +#define XMTFW_8 0x00 /* xmit fifo watermark = 8 words free */ +#define XMTFW_16 0x40 /* 16 words free */ +#define XMTFW_32 0x80 /* 32 words free */ +#define RCVFW_16 0x00 /* recv fifo watermark = 16 bytes avail */ +#define RCVFW_32 0x10 /* 32 bytes avail */ +#define RCVFW_64 0x20 /* 64 bytes avail */ +#define XMTFWU 0x08 /* xmit fifo watermark update enable */ +#define RCVFWU 0x04 /* recv fifo watermark update enable */ +#define XMTBRST 0x02 /* enable transmit burst mode */ +#define RCVBRST 0x01 /* enable receive burst mode */ + +/* Bits in MACCC */ +#define PROM 0x80 /* promiscuous mode */ +#define DXMT2PD 0x40 /* disable xmit two-part deferral algorithm */ +#define EMBA 0x20 /* enable modified backoff algorithm */ +#define DRCVPA 0x08 /* disable receiving physical address */ +#define DRCVBC 0x04 /* disable receiving broadcasts */ +#define ENXMT 0x02 /* enable transmitter */ +#define ENRCV 0x01 /* enable receiver */ + +/* Bits in PLSCC */ +#define XMTSEL 0x08 /* select DO+/DO- state when idle */ +#define PORTSEL_AUI 0x00 /* select AUI port */ +#define PORTSEL_10T 0x02 /* select 10Base-T port */ +#define PORTSEL_DAI 0x04 /* select DAI port */ +#define PORTSEL_GPSI 0x06 /* select GPSI port */ +#define ENPLSIO 0x01 /* enable optional PLS I/O pins */ + +/* Bits in PHYCC */ +#define LNKFL 0x80 /* reports 10Base-T link failure */ +#define DLNKTST 0x40 /* disable 10Base-T link test */ +#define REVPOL 0x20 /* 10Base-T receiver polarity reversed */ +#define DAPC 0x10 /* disable auto receiver polarity correction */ +#define LRT 0x08 /* low receive threshold for long links */ +#define ASEL 0x04 /* auto-select AUI or 10Base-T port */ +#define RWAKE 0x02 /* remote wake function */ +#define AWAKE 0x01 /* auto wake function */ + +/* Bits in IAC */ +#define ADDRCHG 0x80 /* request address change */ +#define PHYADDR 0x04 /* access physical address */ +#define LOGADDR 0x02 /* access multicast filter */ + +/* Bits in UTR */ +#define RTRE 0x80 /* reserved test register enable. DON'T SET. */ +#define RTRD 0x40 /* reserved test register disable. Sticky */ +#define RPAC 0x20 /* accept runt packets */ +#define FCOLL 0x10 /* force collision */ +#define RCVFCSE 0x08 /* receive FCS enable */ +#define LOOP_NONE 0x00 /* no loopback */ +#define LOOP_EXT 0x02 /* external loopback */ +#define LOOP_INT 0x04 /* internal loopback, excludes MENDEC */ +#define LOOP_MENDEC 0x06 /* internal loopback, includes MENDEC */ |