summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/apple/mace.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/apple/mace.c')
-rw-r--r--drivers/net/ethernet/apple/mace.c1031
1 files changed, 1031 insertions, 0 deletions
diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c
new file mode 100644
index 000000000000..2074e9724ba3
--- /dev/null
+++ b/drivers/net/ethernet/apple/mace.c
@@ -0,0 +1,1031 @@
+/*
+ * Network device driver for the MACE ethernet controller on
+ * Apple Powermacs. Assumes it's under a DBDMA controller.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/crc32.h>
+#include <linux/spinlock.h>
+#include <linux/bitrev.h>
+#include <linux/slab.h>
+#include <asm/prom.h>
+#include <asm/dbdma.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/macio.h>
+
+#include "mace.h"
+
+static int port_aaui = -1;
+
+#define N_RX_RING 8
+#define N_TX_RING 6
+#define MAX_TX_ACTIVE 1
+#define NCMDS_TX 1 /* dma commands per element in tx ring */
+#define RX_BUFLEN (ETH_FRAME_LEN + 8)
+#define TX_TIMEOUT HZ /* 1 second */
+
+/* Chip rev needs workaround on HW & multicast addr change */
+#define BROKEN_ADDRCHG_REV 0x0941
+
+/* Bits in transmit DMA status */
+#define TX_DMA_ERR 0x80
+
+struct mace_data {
+ volatile struct mace __iomem *mace;
+ volatile struct dbdma_regs __iomem *tx_dma;
+ int tx_dma_intr;
+ volatile struct dbdma_regs __iomem *rx_dma;
+ int rx_dma_intr;
+ volatile struct dbdma_cmd *tx_cmds; /* xmit dma command list */
+ volatile struct dbdma_cmd *rx_cmds; /* recv dma command list */
+ struct sk_buff *rx_bufs[N_RX_RING];
+ int rx_fill;
+ int rx_empty;
+ struct sk_buff *tx_bufs[N_TX_RING];
+ int tx_fill;
+ int tx_empty;
+ unsigned char maccc;
+ unsigned char tx_fullup;
+ unsigned char tx_active;
+ unsigned char tx_bad_runt;
+ struct timer_list tx_timeout;
+ int timeout_active;
+ int port_aaui;
+ int chipid;
+ struct macio_dev *mdev;
+ spinlock_t lock;
+};
+
+/*
+ * Number of bytes of private data per MACE: allow enough for
+ * the rx and tx dma commands plus a branch dma command each,
+ * and another 16 bytes to allow us to align the dma command
+ * buffers on a 16 byte boundary.
+ */
+#define PRIV_BYTES (sizeof(struct mace_data) \
+ + (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd))
+
+static int mace_open(struct net_device *dev);
+static int mace_close(struct net_device *dev);
+static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev);
+static void mace_set_multicast(struct net_device *dev);
+static void mace_reset(struct net_device *dev);
+static int mace_set_address(struct net_device *dev, void *addr);
+static irqreturn_t mace_interrupt(int irq, void *dev_id);
+static irqreturn_t mace_txdma_intr(int irq, void *dev_id);
+static irqreturn_t mace_rxdma_intr(int irq, void *dev_id);
+static void mace_set_timeout(struct net_device *dev);
+static void mace_tx_timeout(unsigned long data);
+static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma);
+static inline void mace_clean_rings(struct mace_data *mp);
+static void __mace_set_address(struct net_device *dev, void *addr);
+
+/*
+ * If we can't get a skbuff when we need it, we use this area for DMA.
+ */
+static unsigned char *dummy_buf;
+
+static const struct net_device_ops mace_netdev_ops = {
+ .ndo_open = mace_open,
+ .ndo_stop = mace_close,
+ .ndo_start_xmit = mace_xmit_start,
+ .ndo_set_multicast_list = mace_set_multicast,
+ .ndo_set_mac_address = mace_set_address,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
+{
+ struct device_node *mace = macio_get_of_node(mdev);
+ struct net_device *dev;
+ struct mace_data *mp;
+ const unsigned char *addr;
+ int j, rev, rc = -EBUSY;
+
+ if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) {
+ printk(KERN_ERR "can't use MACE %s: need 3 addrs and 3 irqs\n",
+ mace->full_name);
+ return -ENODEV;
+ }
+
+ addr = of_get_property(mace, "mac-address", NULL);
+ if (addr == NULL) {
+ addr = of_get_property(mace, "local-mac-address", NULL);
+ if (addr == NULL) {
+ printk(KERN_ERR "Can't get mac-address for MACE %s\n",
+ mace->full_name);
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * lazy allocate the driver-wide dummy buffer. (Note that we
+ * never have more than one MACE in the system anyway)
+ */
+ if (dummy_buf == NULL) {
+ dummy_buf = kmalloc(RX_BUFLEN+2, GFP_KERNEL);
+ if (dummy_buf == NULL) {
+ printk(KERN_ERR "MACE: couldn't allocate dummy buffer\n");
+ return -ENOMEM;
+ }
+ }
+
+ if (macio_request_resources(mdev, "mace")) {
+ printk(KERN_ERR "MACE: can't request IO resources !\n");
+ return -EBUSY;
+ }
+
+ dev = alloc_etherdev(PRIV_BYTES);
+ if (!dev) {
+ printk(KERN_ERR "MACE: can't allocate ethernet device !\n");
+ rc = -ENOMEM;
+ goto err_release;
+ }
+ SET_NETDEV_DEV(dev, &mdev->ofdev.dev);
+
+ mp = netdev_priv(dev);
+ mp->mdev = mdev;
+ macio_set_drvdata(mdev, dev);
+
+ dev->base_addr = macio_resource_start(mdev, 0);
+ mp->mace = ioremap(dev->base_addr, 0x1000);
+ if (mp->mace == NULL) {
+ printk(KERN_ERR "MACE: can't map IO resources !\n");
+ rc = -ENOMEM;
+ goto err_free;
+ }
+ dev->irq = macio_irq(mdev, 0);
+
+ rev = addr[0] == 0 && addr[1] == 0xA0;
+ for (j = 0; j < 6; ++j) {
+ dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
+ }
+ mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) |
+ in_8(&mp->mace->chipid_lo);
+
+
+ mp = netdev_priv(dev);
+ mp->maccc = ENXMT | ENRCV;
+
+ mp->tx_dma = ioremap(macio_resource_start(mdev, 1), 0x1000);
+ if (mp->tx_dma == NULL) {
+ printk(KERN_ERR "MACE: can't map TX DMA resources !\n");
+ rc = -ENOMEM;
+ goto err_unmap_io;
+ }
+ mp->tx_dma_intr = macio_irq(mdev, 1);
+
+ mp->rx_dma = ioremap(macio_resource_start(mdev, 2), 0x1000);
+ if (mp->rx_dma == NULL) {
+ printk(KERN_ERR "MACE: can't map RX DMA resources !\n");
+ rc = -ENOMEM;
+ goto err_unmap_tx_dma;
+ }
+ mp->rx_dma_intr = macio_irq(mdev, 2);
+
+ mp->tx_cmds = (volatile struct dbdma_cmd *) DBDMA_ALIGN(mp + 1);
+ mp->rx_cmds = mp->tx_cmds + NCMDS_TX * N_TX_RING + 1;
+
+ memset((char *) mp->tx_cmds, 0,
+ (NCMDS_TX*N_TX_RING + N_RX_RING + 2) * sizeof(struct dbdma_cmd));
+ init_timer(&mp->tx_timeout);
+ spin_lock_init(&mp->lock);
+ mp->timeout_active = 0;
+
+ if (port_aaui >= 0)
+ mp->port_aaui = port_aaui;
+ else {
+ /* Apple Network Server uses the AAUI port */
+ if (of_machine_is_compatible("AAPL,ShinerESB"))
+ mp->port_aaui = 1;
+ else {
+#ifdef CONFIG_MACE_AAUI_PORT
+ mp->port_aaui = 1;
+#else
+ mp->port_aaui = 0;
+#endif
+ }
+ }
+
+ dev->netdev_ops = &mace_netdev_ops;
+
+ /*
+ * Most of what is below could be moved to mace_open()
+ */
+ mace_reset(dev);
+
+ rc = request_irq(dev->irq, mace_interrupt, 0, "MACE", dev);
+ if (rc) {
+ printk(KERN_ERR "MACE: can't get irq %d\n", dev->irq);
+ goto err_unmap_rx_dma;
+ }
+ rc = request_irq(mp->tx_dma_intr, mace_txdma_intr, 0, "MACE-txdma", dev);
+ if (rc) {
+ printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr);
+ goto err_free_irq;
+ }
+ rc = request_irq(mp->rx_dma_intr, mace_rxdma_intr, 0, "MACE-rxdma", dev);
+ if (rc) {
+ printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr);
+ goto err_free_tx_irq;
+ }
+
+ rc = register_netdev(dev);
+ if (rc) {
+ printk(KERN_ERR "MACE: Cannot register net device, aborting.\n");
+ goto err_free_rx_irq;
+ }
+
+ printk(KERN_INFO "%s: MACE at %pM, chip revision %d.%d\n",
+ dev->name, dev->dev_addr,
+ mp->chipid >> 8, mp->chipid & 0xff);
+
+ return 0;
+
+ err_free_rx_irq:
+ free_irq(macio_irq(mdev, 2), dev);
+ err_free_tx_irq:
+ free_irq(macio_irq(mdev, 1), dev);
+ err_free_irq:
+ free_irq(macio_irq(mdev, 0), dev);
+ err_unmap_rx_dma:
+ iounmap(mp->rx_dma);
+ err_unmap_tx_dma:
+ iounmap(mp->tx_dma);
+ err_unmap_io:
+ iounmap(mp->mace);
+ err_free:
+ free_netdev(dev);
+ err_release:
+ macio_release_resources(mdev);
+
+ return rc;
+}
+
+static int __devexit mace_remove(struct macio_dev *mdev)
+{
+ struct net_device *dev = macio_get_drvdata(mdev);
+ struct mace_data *mp;
+
+ BUG_ON(dev == NULL);
+
+ macio_set_drvdata(mdev, NULL);
+
+ mp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+
+ free_irq(dev->irq, dev);
+ free_irq(mp->tx_dma_intr, dev);
+ free_irq(mp->rx_dma_intr, dev);
+
+ iounmap(mp->rx_dma);
+ iounmap(mp->tx_dma);
+ iounmap(mp->mace);
+
+ free_netdev(dev);
+
+ macio_release_resources(mdev);
+
+ return 0;
+}
+
+static void dbdma_reset(volatile struct dbdma_regs __iomem *dma)
+{
+ int i;
+
+ out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16);
+
+ /*
+ * Yes this looks peculiar, but apparently it needs to be this
+ * way on some machines.
+ */
+ for (i = 200; i > 0; --i)
+ if (ld_le32(&dma->control) & RUN)
+ udelay(1);
+}
+
+static void mace_reset(struct net_device *dev)
+{
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct mace __iomem *mb = mp->mace;
+ int i;
+
+ /* soft-reset the chip */
+ i = 200;
+ while (--i) {
+ out_8(&mb->biucc, SWRST);
+ if (in_8(&mb->biucc) & SWRST) {
+ udelay(10);
+ continue;
+ }
+ break;
+ }
+ if (!i) {
+ printk(KERN_ERR "mace: cannot reset chip!\n");
+ return;
+ }
+
+ out_8(&mb->imr, 0xff); /* disable all intrs for now */
+ i = in_8(&mb->ir);
+ out_8(&mb->maccc, 0); /* turn off tx, rx */
+
+ out_8(&mb->biucc, XMTSP_64);
+ out_8(&mb->utr, RTRD);
+ out_8(&mb->fifocc, RCVFW_32 | XMTFW_16 | XMTFWU | RCVFWU | XMTBRST);
+ out_8(&mb->xmtfc, AUTO_PAD_XMIT); /* auto-pad short frames */
+ out_8(&mb->rcvfc, 0);
+
+ /* load up the hardware address */
+ __mace_set_address(dev, dev->dev_addr);
+
+ /* clear the multicast filter */
+ if (mp->chipid == BROKEN_ADDRCHG_REV)
+ out_8(&mb->iac, LOGADDR);
+ else {
+ out_8(&mb->iac, ADDRCHG | LOGADDR);
+ while ((in_8(&mb->iac) & ADDRCHG) != 0)
+ ;
+ }
+ for (i = 0; i < 8; ++i)
+ out_8(&mb->ladrf, 0);
+
+ /* done changing address */
+ if (mp->chipid != BROKEN_ADDRCHG_REV)
+ out_8(&mb->iac, 0);
+
+ if (mp->port_aaui)
+ out_8(&mb->plscc, PORTSEL_AUI + ENPLSIO);
+ else
+ out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO);
+}
+
+static void __mace_set_address(struct net_device *dev, void *addr)
+{
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct mace __iomem *mb = mp->mace;
+ unsigned char *p = addr;
+ int i;
+
+ /* load up the hardware address */
+ if (mp->chipid == BROKEN_ADDRCHG_REV)
+ out_8(&mb->iac, PHYADDR);
+ else {
+ out_8(&mb->iac, ADDRCHG | PHYADDR);
+ while ((in_8(&mb->iac) & ADDRCHG) != 0)
+ ;
+ }
+ for (i = 0; i < 6; ++i)
+ out_8(&mb->padr, dev->dev_addr[i] = p[i]);
+ if (mp->chipid != BROKEN_ADDRCHG_REV)
+ out_8(&mb->iac, 0);
+}
+
+static int mace_set_address(struct net_device *dev, void *addr)
+{
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct mace __iomem *mb = mp->mace;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mp->lock, flags);
+
+ __mace_set_address(dev, addr);
+
+ /* note: setting ADDRCHG clears ENRCV */
+ out_8(&mb->maccc, mp->maccc);
+
+ spin_unlock_irqrestore(&mp->lock, flags);
+ return 0;
+}
+
+static inline void mace_clean_rings(struct mace_data *mp)
+{
+ int i;
+
+ /* free some skb's */
+ for (i = 0; i < N_RX_RING; ++i) {
+ if (mp->rx_bufs[i] != NULL) {
+ dev_kfree_skb(mp->rx_bufs[i]);
+ mp->rx_bufs[i] = NULL;
+ }
+ }
+ for (i = mp->tx_empty; i != mp->tx_fill; ) {
+ dev_kfree_skb(mp->tx_bufs[i]);
+ if (++i >= N_TX_RING)
+ i = 0;
+ }
+}
+
+static int mace_open(struct net_device *dev)
+{
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct mace __iomem *mb = mp->mace;
+ volatile struct dbdma_regs __iomem *rd = mp->rx_dma;
+ volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+ volatile struct dbdma_cmd *cp;
+ int i;
+ struct sk_buff *skb;
+ unsigned char *data;
+
+ /* reset the chip */
+ mace_reset(dev);
+
+ /* initialize list of sk_buffs for receiving and set up recv dma */
+ mace_clean_rings(mp);
+ memset((char *)mp->rx_cmds, 0, N_RX_RING * sizeof(struct dbdma_cmd));
+ cp = mp->rx_cmds;
+ for (i = 0; i < N_RX_RING - 1; ++i) {
+ skb = dev_alloc_skb(RX_BUFLEN + 2);
+ if (!skb) {
+ data = dummy_buf;
+ } else {
+ skb_reserve(skb, 2); /* so IP header lands on 4-byte bdry */
+ data = skb->data;
+ }
+ mp->rx_bufs[i] = skb;
+ st_le16(&cp->req_count, RX_BUFLEN);
+ st_le16(&cp->command, INPUT_LAST + INTR_ALWAYS);
+ st_le32(&cp->phy_addr, virt_to_bus(data));
+ cp->xfer_status = 0;
+ ++cp;
+ }
+ mp->rx_bufs[i] = NULL;
+ st_le16(&cp->command, DBDMA_STOP);
+ mp->rx_fill = i;
+ mp->rx_empty = 0;
+
+ /* Put a branch back to the beginning of the receive command list */
+ ++cp;
+ st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
+ st_le32(&cp->cmd_dep, virt_to_bus(mp->rx_cmds));
+
+ /* start rx dma */
+ out_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */
+ out_le32(&rd->cmdptr, virt_to_bus(mp->rx_cmds));
+ out_le32(&rd->control, (RUN << 16) | RUN);
+
+ /* put a branch at the end of the tx command list */
+ cp = mp->tx_cmds + NCMDS_TX * N_TX_RING;
+ st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
+ st_le32(&cp->cmd_dep, virt_to_bus(mp->tx_cmds));
+
+ /* reset tx dma */
+ out_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
+ out_le32(&td->cmdptr, virt_to_bus(mp->tx_cmds));
+ mp->tx_fill = 0;
+ mp->tx_empty = 0;
+ mp->tx_fullup = 0;
+ mp->tx_active = 0;
+ mp->tx_bad_runt = 0;
+
+ /* turn it on! */
+ out_8(&mb->maccc, mp->maccc);
+ /* enable all interrupts except receive interrupts */
+ out_8(&mb->imr, RCVINT);
+
+ return 0;
+}
+
+static int mace_close(struct net_device *dev)
+{
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct mace __iomem *mb = mp->mace;
+ volatile struct dbdma_regs __iomem *rd = mp->rx_dma;
+ volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+
+ /* disable rx and tx */
+ out_8(&mb->maccc, 0);
+ out_8(&mb->imr, 0xff); /* disable all intrs */
+
+ /* disable rx and tx dma */
+ st_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */
+ st_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */
+
+ mace_clean_rings(mp);
+
+ return 0;
+}
+
+static inline void mace_set_timeout(struct net_device *dev)
+{
+ struct mace_data *mp = netdev_priv(dev);
+
+ if (mp->timeout_active)
+ del_timer(&mp->tx_timeout);
+ mp->tx_timeout.expires = jiffies + TX_TIMEOUT;
+ mp->tx_timeout.function = mace_tx_timeout;
+ mp->tx_timeout.data = (unsigned long) dev;
+ add_timer(&mp->tx_timeout);
+ mp->timeout_active = 1;
+}
+
+static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev)
+{
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+ volatile struct dbdma_cmd *cp, *np;
+ unsigned long flags;
+ int fill, next, len;
+
+ /* see if there's a free slot in the tx ring */
+ spin_lock_irqsave(&mp->lock, flags);
+ fill = mp->tx_fill;
+ next = fill + 1;
+ if (next >= N_TX_RING)
+ next = 0;
+ if (next == mp->tx_empty) {
+ netif_stop_queue(dev);
+ mp->tx_fullup = 1;
+ spin_unlock_irqrestore(&mp->lock, flags);
+ return NETDEV_TX_BUSY; /* can't take it at the moment */
+ }
+ spin_unlock_irqrestore(&mp->lock, flags);
+
+ /* partially fill in the dma command block */
+ len = skb->len;
+ if (len > ETH_FRAME_LEN) {
+ printk(KERN_DEBUG "mace: xmit frame too long (%d)\n", len);
+ len = ETH_FRAME_LEN;
+ }
+ mp->tx_bufs[fill] = skb;
+ cp = mp->tx_cmds + NCMDS_TX * fill;
+ st_le16(&cp->req_count, len);
+ st_le32(&cp->phy_addr, virt_to_bus(skb->data));
+
+ np = mp->tx_cmds + NCMDS_TX * next;
+ out_le16(&np->command, DBDMA_STOP);
+
+ /* poke the tx dma channel */
+ spin_lock_irqsave(&mp->lock, flags);
+ mp->tx_fill = next;
+ if (!mp->tx_bad_runt && mp->tx_active < MAX_TX_ACTIVE) {
+ out_le16(&cp->xfer_status, 0);
+ out_le16(&cp->command, OUTPUT_LAST);
+ out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
+ ++mp->tx_active;
+ mace_set_timeout(dev);
+ }
+ if (++next >= N_TX_RING)
+ next = 0;
+ if (next == mp->tx_empty)
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&mp->lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static void mace_set_multicast(struct net_device *dev)
+{
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct mace __iomem *mb = mp->mace;
+ int i;
+ u32 crc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mp->lock, flags);
+ mp->maccc &= ~PROM;
+ if (dev->flags & IFF_PROMISC) {
+ mp->maccc |= PROM;
+ } else {
+ unsigned char multicast_filter[8];
+ struct netdev_hw_addr *ha;
+
+ if (dev->flags & IFF_ALLMULTI) {
+ for (i = 0; i < 8; i++)
+ multicast_filter[i] = 0xff;
+ } else {
+ for (i = 0; i < 8; i++)
+ multicast_filter[i] = 0;
+ netdev_for_each_mc_addr(ha, dev) {
+ crc = ether_crc_le(6, ha->addr);
+ i = crc >> 26; /* bit number in multicast_filter */
+ multicast_filter[i >> 3] |= 1 << (i & 7);
+ }
+ }
+#if 0
+ printk("Multicast filter :");
+ for (i = 0; i < 8; i++)
+ printk("%02x ", multicast_filter[i]);
+ printk("\n");
+#endif
+
+ if (mp->chipid == BROKEN_ADDRCHG_REV)
+ out_8(&mb->iac, LOGADDR);
+ else {
+ out_8(&mb->iac, ADDRCHG | LOGADDR);
+ while ((in_8(&mb->iac) & ADDRCHG) != 0)
+ ;
+ }
+ for (i = 0; i < 8; ++i)
+ out_8(&mb->ladrf, multicast_filter[i]);
+ if (mp->chipid != BROKEN_ADDRCHG_REV)
+ out_8(&mb->iac, 0);
+ }
+ /* reset maccc */
+ out_8(&mb->maccc, mp->maccc);
+ spin_unlock_irqrestore(&mp->lock, flags);
+}
+
+static void mace_handle_misc_intrs(struct mace_data *mp, int intr, struct net_device *dev)
+{
+ volatile struct mace __iomem *mb = mp->mace;
+ static int mace_babbles, mace_jabbers;
+
+ if (intr & MPCO)
+ dev->stats.rx_missed_errors += 256;
+ dev->stats.rx_missed_errors += in_8(&mb->mpc); /* reading clears it */
+ if (intr & RNTPCO)
+ dev->stats.rx_length_errors += 256;
+ dev->stats.rx_length_errors += in_8(&mb->rntpc); /* reading clears it */
+ if (intr & CERR)
+ ++dev->stats.tx_heartbeat_errors;
+ if (intr & BABBLE)
+ if (mace_babbles++ < 4)
+ printk(KERN_DEBUG "mace: babbling transmitter\n");
+ if (intr & JABBER)
+ if (mace_jabbers++ < 4)
+ printk(KERN_DEBUG "mace: jabbering transceiver\n");
+}
+
+static irqreturn_t mace_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct mace __iomem *mb = mp->mace;
+ volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+ volatile struct dbdma_cmd *cp;
+ int intr, fs, i, stat, x;
+ int xcount, dstat;
+ unsigned long flags;
+ /* static int mace_last_fs, mace_last_xcount; */
+
+ spin_lock_irqsave(&mp->lock, flags);
+ intr = in_8(&mb->ir); /* read interrupt register */
+ in_8(&mb->xmtrc); /* get retries */
+ mace_handle_misc_intrs(mp, intr, dev);
+
+ i = mp->tx_empty;
+ while (in_8(&mb->pr) & XMTSV) {
+ del_timer(&mp->tx_timeout);
+ mp->timeout_active = 0;
+ /*
+ * Clear any interrupt indication associated with this status
+ * word. This appears to unlatch any error indication from
+ * the DMA controller.
+ */
+ intr = in_8(&mb->ir);
+ if (intr != 0)
+ mace_handle_misc_intrs(mp, intr, dev);
+ if (mp->tx_bad_runt) {
+ fs = in_8(&mb->xmtfs);
+ mp->tx_bad_runt = 0;
+ out_8(&mb->xmtfc, AUTO_PAD_XMIT);
+ continue;
+ }
+ dstat = ld_le32(&td->status);
+ /* stop DMA controller */
+ out_le32(&td->control, RUN << 16);
+ /*
+ * xcount is the number of complete frames which have been
+ * written to the fifo but for which status has not been read.
+ */
+ xcount = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK;
+ if (xcount == 0 || (dstat & DEAD)) {
+ /*
+ * If a packet was aborted before the DMA controller has
+ * finished transferring it, it seems that there are 2 bytes
+ * which are stuck in some buffer somewhere. These will get
+ * transmitted as soon as we read the frame status (which
+ * reenables the transmit data transfer request). Turning
+ * off the DMA controller and/or resetting the MACE doesn't
+ * help. So we disable auto-padding and FCS transmission
+ * so the two bytes will only be a runt packet which should
+ * be ignored by other stations.
+ */
+ out_8(&mb->xmtfc, DXMTFCS);
+ }
+ fs = in_8(&mb->xmtfs);
+ if ((fs & XMTSV) == 0) {
+ printk(KERN_ERR "mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n",
+ fs, xcount, dstat);
+ mace_reset(dev);
+ /*
+ * XXX mace likes to hang the machine after a xmtfs error.
+ * This is hard to reproduce, reseting *may* help
+ */
+ }
+ cp = mp->tx_cmds + NCMDS_TX * i;
+ stat = ld_le16(&cp->xfer_status);
+ if ((fs & (UFLO|LCOL|LCAR|RTRY)) || (dstat & DEAD) || xcount == 0) {
+ /*
+ * Check whether there were in fact 2 bytes written to
+ * the transmit FIFO.
+ */
+ udelay(1);
+ x = (in_8(&mb->fifofc) >> XMTFC_SH) & XMTFC_MASK;
+ if (x != 0) {
+ /* there were two bytes with an end-of-packet indication */
+ mp->tx_bad_runt = 1;
+ mace_set_timeout(dev);
+ } else {
+ /*
+ * Either there weren't the two bytes buffered up, or they
+ * didn't have an end-of-packet indication.
+ * We flush the transmit FIFO just in case (by setting the
+ * XMTFWU bit with the transmitter disabled).
+ */
+ out_8(&mb->maccc, in_8(&mb->maccc) & ~ENXMT);
+ out_8(&mb->fifocc, in_8(&mb->fifocc) | XMTFWU);
+ udelay(1);
+ out_8(&mb->maccc, in_8(&mb->maccc) | ENXMT);
+ out_8(&mb->xmtfc, AUTO_PAD_XMIT);
+ }
+ }
+ /* dma should have finished */
+ if (i == mp->tx_fill) {
+ printk(KERN_DEBUG "mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n",
+ fs, xcount, dstat);
+ continue;
+ }
+ /* Update stats */
+ if (fs & (UFLO|LCOL|LCAR|RTRY)) {
+ ++dev->stats.tx_errors;
+ if (fs & LCAR)
+ ++dev->stats.tx_carrier_errors;
+ if (fs & (UFLO|LCOL|RTRY))
+ ++dev->stats.tx_aborted_errors;
+ } else {
+ dev->stats.tx_bytes += mp->tx_bufs[i]->len;
+ ++dev->stats.tx_packets;
+ }
+ dev_kfree_skb_irq(mp->tx_bufs[i]);
+ --mp->tx_active;
+ if (++i >= N_TX_RING)
+ i = 0;
+#if 0
+ mace_last_fs = fs;
+ mace_last_xcount = xcount;
+#endif
+ }
+
+ if (i != mp->tx_empty) {
+ mp->tx_fullup = 0;
+ netif_wake_queue(dev);
+ }
+ mp->tx_empty = i;
+ i += mp->tx_active;
+ if (i >= N_TX_RING)
+ i -= N_TX_RING;
+ if (!mp->tx_bad_runt && i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE) {
+ do {
+ /* set up the next one */
+ cp = mp->tx_cmds + NCMDS_TX * i;
+ out_le16(&cp->xfer_status, 0);
+ out_le16(&cp->command, OUTPUT_LAST);
+ ++mp->tx_active;
+ if (++i >= N_TX_RING)
+ i = 0;
+ } while (i != mp->tx_fill && mp->tx_active < MAX_TX_ACTIVE);
+ out_le32(&td->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
+ mace_set_timeout(dev);
+ }
+ spin_unlock_irqrestore(&mp->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static void mace_tx_timeout(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct mace __iomem *mb = mp->mace;
+ volatile struct dbdma_regs __iomem *td = mp->tx_dma;
+ volatile struct dbdma_regs __iomem *rd = mp->rx_dma;
+ volatile struct dbdma_cmd *cp;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&mp->lock, flags);
+ mp->timeout_active = 0;
+ if (mp->tx_active == 0 && !mp->tx_bad_runt)
+ goto out;
+
+ /* update various counters */
+ mace_handle_misc_intrs(mp, in_8(&mb->ir), dev);
+
+ cp = mp->tx_cmds + NCMDS_TX * mp->tx_empty;
+
+ /* turn off both tx and rx and reset the chip */
+ out_8(&mb->maccc, 0);
+ printk(KERN_ERR "mace: transmit timeout - resetting\n");
+ dbdma_reset(td);
+ mace_reset(dev);
+
+ /* restart rx dma */
+ cp = bus_to_virt(ld_le32(&rd->cmdptr));
+ dbdma_reset(rd);
+ out_le16(&cp->xfer_status, 0);
+ out_le32(&rd->cmdptr, virt_to_bus(cp));
+ out_le32(&rd->control, (RUN << 16) | RUN);
+
+ /* fix up the transmit side */
+ i = mp->tx_empty;
+ mp->tx_active = 0;
+ ++dev->stats.tx_errors;
+ if (mp->tx_bad_runt) {
+ mp->tx_bad_runt = 0;
+ } else if (i != mp->tx_fill) {
+ dev_kfree_skb(mp->tx_bufs[i]);
+ if (++i >= N_TX_RING)
+ i = 0;
+ mp->tx_empty = i;
+ }
+ mp->tx_fullup = 0;
+ netif_wake_queue(dev);
+ if (i != mp->tx_fill) {
+ cp = mp->tx_cmds + NCMDS_TX * i;
+ out_le16(&cp->xfer_status, 0);
+ out_le16(&cp->command, OUTPUT_LAST);
+ out_le32(&td->cmdptr, virt_to_bus(cp));
+ out_le32(&td->control, (RUN << 16) | RUN);
+ ++mp->tx_active;
+ mace_set_timeout(dev);
+ }
+
+ /* turn it back on */
+ out_8(&mb->imr, RCVINT);
+ out_8(&mb->maccc, mp->maccc);
+
+out:
+ spin_unlock_irqrestore(&mp->lock, flags);
+}
+
+static irqreturn_t mace_txdma_intr(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mace_rxdma_intr(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct mace_data *mp = netdev_priv(dev);
+ volatile struct dbdma_regs __iomem *rd = mp->rx_dma;
+ volatile struct dbdma_cmd *cp, *np;
+ int i, nb, stat, next;
+ struct sk_buff *skb;
+ unsigned frame_status;
+ static int mace_lost_status;
+ unsigned char *data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mp->lock, flags);
+ for (i = mp->rx_empty; i != mp->rx_fill; ) {
+ cp = mp->rx_cmds + i;
+ stat = ld_le16(&cp->xfer_status);
+ if ((stat & ACTIVE) == 0) {
+ next = i + 1;
+ if (next >= N_RX_RING)
+ next = 0;
+ np = mp->rx_cmds + next;
+ if (next != mp->rx_fill &&
+ (ld_le16(&np->xfer_status) & ACTIVE) != 0) {
+ printk(KERN_DEBUG "mace: lost a status word\n");
+ ++mace_lost_status;
+ } else
+ break;
+ }
+ nb = ld_le16(&cp->req_count) - ld_le16(&cp->res_count);
+ out_le16(&cp->command, DBDMA_STOP);
+ /* got a packet, have a look at it */
+ skb = mp->rx_bufs[i];
+ if (!skb) {
+ ++dev->stats.rx_dropped;
+ } else if (nb > 8) {
+ data = skb->data;
+ frame_status = (data[nb-3] << 8) + data[nb-4];
+ if (frame_status & (RS_OFLO|RS_CLSN|RS_FRAMERR|RS_FCSERR)) {
+ ++dev->stats.rx_errors;
+ if (frame_status & RS_OFLO)
+ ++dev->stats.rx_over_errors;
+ if (frame_status & RS_FRAMERR)
+ ++dev->stats.rx_frame_errors;
+ if (frame_status & RS_FCSERR)
+ ++dev->stats.rx_crc_errors;
+ } else {
+ /* Mace feature AUTO_STRIP_RCV is on by default, dropping the
+ * FCS on frames with 802.3 headers. This means that Ethernet
+ * frames have 8 extra octets at the end, while 802.3 frames
+ * have only 4. We need to correctly account for this. */
+ if (*(unsigned short *)(data+12) < 1536) /* 802.3 header */
+ nb -= 4;
+ else /* Ethernet header; mace includes FCS */
+ nb -= 8;
+ skb_put(skb, nb);
+ skb->protocol = eth_type_trans(skb, dev);
+ dev->stats.rx_bytes += skb->len;
+ netif_rx(skb);
+ mp->rx_bufs[i] = NULL;
+ ++dev->stats.rx_packets;
+ }
+ } else {
+ ++dev->stats.rx_errors;
+ ++dev->stats.rx_length_errors;
+ }
+
+ /* advance to next */
+ if (++i >= N_RX_RING)
+ i = 0;
+ }
+ mp->rx_empty = i;
+
+ i = mp->rx_fill;
+ for (;;) {
+ next = i + 1;
+ if (next >= N_RX_RING)
+ next = 0;
+ if (next == mp->rx_empty)
+ break;
+ cp = mp->rx_cmds + i;
+ skb = mp->rx_bufs[i];
+ if (!skb) {
+ skb = dev_alloc_skb(RX_BUFLEN + 2);
+ if (skb) {
+ skb_reserve(skb, 2);
+ mp->rx_bufs[i] = skb;
+ }
+ }
+ st_le16(&cp->req_count, RX_BUFLEN);
+ data = skb? skb->data: dummy_buf;
+ st_le32(&cp->phy_addr, virt_to_bus(data));
+ out_le16(&cp->xfer_status, 0);
+ out_le16(&cp->command, INPUT_LAST + INTR_ALWAYS);
+#if 0
+ if ((ld_le32(&rd->status) & ACTIVE) != 0) {
+ out_le32(&rd->control, (PAUSE << 16) | PAUSE);
+ while ((in_le32(&rd->status) & ACTIVE) != 0)
+ ;
+ }
+#endif
+ i = next;
+ }
+ if (i != mp->rx_fill) {
+ out_le32(&rd->control, ((RUN|WAKE) << 16) | (RUN|WAKE));
+ mp->rx_fill = i;
+ }
+ spin_unlock_irqrestore(&mp->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static struct of_device_id mace_match[] =
+{
+ {
+ .name = "mace",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE (of, mace_match);
+
+static struct macio_driver mace_driver =
+{
+ .driver = {
+ .name = "mace",
+ .owner = THIS_MODULE,
+ .of_match_table = mace_match,
+ },
+ .probe = mace_probe,
+ .remove = mace_remove,
+};
+
+
+static int __init mace_init(void)
+{
+ return macio_register_driver(&mace_driver);
+}
+
+static void __exit mace_cleanup(void)
+{
+ macio_unregister_driver(&mace_driver);
+
+ kfree(dummy_buf);
+ dummy_buf = NULL;
+}
+
+MODULE_AUTHOR("Paul Mackerras");
+MODULE_DESCRIPTION("PowerMac MACE driver.");
+module_param(port_aaui, int, 0);
+MODULE_PARM_DESC(port_aaui, "MACE uses AAUI port (0-1)");
+MODULE_LICENSE("GPL");
+
+module_init(mace_init);
+module_exit(mace_cleanup);