diff options
Diffstat (limited to 'drivers/net/dsa/mv88e6xxx.c')
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx.c | 70 |
1 files changed, 18 insertions, 52 deletions
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index a2c62c2f30ee..d436668cb515 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -15,8 +15,7 @@ #include <net/dsa.h> #include "mv88e6xxx.h" -/* - * If the switch's ADDR[4:0] strap pins are strapped to zero, it will +/* If the switch's ADDR[4:0] strap pins are strapped to zero, it will * use all 32 SMI bus addresses on its SMI bus, and all switch registers * will be directly accessible on some {device address,register address} * pair. If the ADDR[4:0] pins are not strapped to zero, the switch @@ -48,30 +47,22 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg) if (sw_addr == 0) return mdiobus_read(bus, addr, reg); - /* - * Wait for the bus to become free. - */ + /* Wait for the bus to become free. */ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); if (ret < 0) return ret; - /* - * Transmit the read command. - */ + /* Transmit the read command. */ ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg); if (ret < 0) return ret; - /* - * Wait for the read command to complete. - */ + /* Wait for the read command to complete. */ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); if (ret < 0) return ret; - /* - * Read the data. - */ + /* Read the data. */ ret = mdiobus_read(bus, sw_addr, 1); if (ret < 0) return ret; @@ -100,30 +91,22 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr, if (sw_addr == 0) return mdiobus_write(bus, addr, reg, val); - /* - * Wait for the bus to become free. - */ + /* Wait for the bus to become free. */ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); if (ret < 0) return ret; - /* - * Transmit the data to write. - */ + /* Transmit the data to write. */ ret = mdiobus_write(bus, sw_addr, 1, val); if (ret < 0) return ret; - /* - * Transmit the write command. - */ + /* Transmit the write command. */ ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg); if (ret < 0) return ret; - /* - * Wait for the write command to complete. - */ + /* Wait for the write command to complete. */ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); if (ret < 0) return ret; @@ -146,9 +129,7 @@ int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) int mv88e6xxx_config_prio(struct dsa_switch *ds) { - /* - * Configure the IP ToS mapping registers. - */ + /* Configure the IP ToS mapping registers. */ REG_WRITE(REG_GLOBAL, 0x10, 0x0000); REG_WRITE(REG_GLOBAL, 0x11, 0x0000); REG_WRITE(REG_GLOBAL, 0x12, 0x5555); @@ -158,9 +139,7 @@ int mv88e6xxx_config_prio(struct dsa_switch *ds) REG_WRITE(REG_GLOBAL, 0x16, 0xffff); REG_WRITE(REG_GLOBAL, 0x17, 0xffff); - /* - * Configure the IEEE 802.1p priority mapping register. - */ + /* Configure the IEEE 802.1p priority mapping register. */ REG_WRITE(REG_GLOBAL, 0x18, 0xfa41); return 0; @@ -183,14 +162,10 @@ int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr) for (i = 0; i < 6; i++) { int j; - /* - * Write the MAC address byte. - */ + /* Write the MAC address byte. */ REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]); - /* - * Wait for the write to complete. - */ + /* Wait for the write to complete. */ for (j = 0; j < 16; j++) { ret = REG_READ(REG_GLOBAL2, 0x0d); if ((ret & 0x8000) == 0) @@ -282,8 +257,7 @@ static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds) mutex_lock(&ps->ppu_mutex); - /* - * If the PHY polling unit is enabled, disable it so that + /* If the PHY polling unit is enabled, disable it so that * we can access the PHY registers. If it was already * disabled, cancel the timer that is going to re-enable * it. @@ -307,9 +281,7 @@ static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds) { struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - /* - * Schedule a timer to re-enable the PHY polling unit. - */ + /* Schedule a timer to re-enable the PHY polling unit. */ mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10)); mutex_unlock(&ps->ppu_mutex); } @@ -431,14 +403,10 @@ static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port) { int ret; - /* - * Snapshot the hardware statistics counters for this port. - */ + /* Snapshot the hardware statistics counters for this port. */ REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port); - /* - * Wait for the snapshotting to complete. - */ + /* Wait for the snapshotting to complete. */ ret = mv88e6xxx_stats_wait(ds); if (ret < 0) return ret; @@ -502,9 +470,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, return; } - /* - * Read each of the counters. - */ + /* Read each of the counters. */ for (i = 0; i < nr_stats; i++) { struct mv88e6xxx_hw_stat *s = stats + i; u32 low; |