summaryrefslogtreecommitdiff
path: root/drivers/net/cxgb4vf/cxgb4vf_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/cxgb4vf/cxgb4vf_main.c')
-rw-r--r--drivers/net/cxgb4vf/cxgb4vf_main.c43
1 files changed, 27 insertions, 16 deletions
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 555ecc5a2e93..c3449bbc585a 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -753,7 +753,9 @@ static int cxgb4vf_open(struct net_device *dev)
if (err)
return err;
set_bit(pi->port_id, &adapter->open_device_map);
- link_start(dev);
+ err = link_start(dev);
+ if (err)
+ return err;
netif_tx_start_all_queues(dev);
return 0;
}
@@ -1103,18 +1105,6 @@ static int cxgb4vf_set_mac_addr(struct net_device *dev, void *_addr)
return 0;
}
-/*
- * Return a TX Queue on which to send the specified skb.
- */
-static u16 cxgb4vf_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
- /*
- * XXX For now just use the default hash but we probably want to
- * XXX look at other possibilities ...
- */
- return skb_tx_hash(dev, skb);
-}
-
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Poll all of our receive queues. This is called outside of normal interrupt
@@ -2075,6 +2065,22 @@ static int adap_init0(struct adapter *adapter)
}
/*
+ * Some environments do not properly handle PCIE FLRs -- e.g. in Linux
+ * 2.6.31 and later we can't call pci_reset_function() in order to
+ * issue an FLR because of a self- deadlock on the device semaphore.
+ * Meanwhile, the OS infrastructure doesn't issue FLRs in all the
+ * cases where they're needed -- for instance, some versions of KVM
+ * fail to reset "Assigned Devices" when the VM reboots. Therefore we
+ * use the firmware based reset in order to reset any per function
+ * state.
+ */
+ err = t4vf_fw_reset(adapter);
+ if (err < 0) {
+ dev_err(adapter->pdev_dev, "FW reset failed: err=%d\n", err);
+ return err;
+ }
+
+ /*
* Grab basic operational parameters. These will predominantly have
* been set up by the Physical Function Driver or will be hard coded
* into the adapter. We just have to live with them ... Note that
@@ -2417,7 +2423,6 @@ static const struct net_device_ops cxgb4vf_netdev_ops = {
.ndo_get_stats = cxgb4vf_get_stats,
.ndo_set_rx_mode = cxgb4vf_set_rxmode,
.ndo_set_mac_address = cxgb4vf_set_mac_addr,
- .ndo_select_queue = cxgb4vf_select_queue,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = cxgb4vf_do_ioctl,
.ndo_change_mtu = cxgb4vf_change_mtu,
@@ -2600,7 +2605,6 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
pi->xact_addr_filt = -1;
pi->rx_offload = RX_CSO;
netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
netdev->irq = pdev->irq;
netdev->features = (NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
@@ -2625,7 +2629,6 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
netdev->do_ioctl = cxgb4vf_do_ioctl;
netdev->change_mtu = cxgb4vf_change_mtu;
netdev->set_mac_address = cxgb4vf_set_mac_addr;
- netdev->select_queue = cxgb4vf_select_queue;
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = cxgb4vf_poll_controller;
#endif
@@ -2844,6 +2847,14 @@ static struct pci_device_id cxgb4vf_pci_tbl[] = {
CH_DEVICE(0x4800, 0), /* T440-dbg */
CH_DEVICE(0x4801, 0), /* T420-cr */
CH_DEVICE(0x4802, 0), /* T422-cr */
+ CH_DEVICE(0x4803, 0), /* T440-cr */
+ CH_DEVICE(0x4804, 0), /* T420-bch */
+ CH_DEVICE(0x4805, 0), /* T440-bch */
+ CH_DEVICE(0x4806, 0), /* T460-ch */
+ CH_DEVICE(0x4807, 0), /* T420-so */
+ CH_DEVICE(0x4808, 0), /* T420-cx */
+ CH_DEVICE(0x4809, 0), /* T420-bt */
+ CH_DEVICE(0x480a, 0), /* T404-bt */
{ 0, }
};