diff options
Diffstat (limited to 'drivers/net/can/dev.c')
| -rw-r--r-- | drivers/net/can/dev.c | 159 |
1 files changed, 124 insertions, 35 deletions
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index c0563f183721..c7a260478749 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -99,10 +99,10 @@ static int can_update_spt(const struct can_bittiming_const *btc, return 1000 * (tseg + 1 - *tseg2) / (tseg + 1); } -static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) +static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) { struct can_priv *priv = netdev_priv(dev); - const struct can_bittiming_const *btc = priv->bittiming_const; long rate, best_rate = 0; long best_error = 1000000000, error = 0; int best_tseg = 0, best_brp = 0, brp = 0; @@ -110,9 +110,6 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) int spt_error = 1000, spt = 0, sampl_pt; u64 v64; - if (!priv->bittiming_const) - return -ENOTSUPP; - /* Use CIA recommended sample points */ if (bt->sample_point) { sampl_pt = bt->sample_point; @@ -204,7 +201,8 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) return 0; } #else /* !CONFIG_CAN_CALC_BITTIMING */ -static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) +static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) { netdev_err(dev, "bit-timing calculation not available\n"); return -EINVAL; @@ -217,16 +215,13 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) * prescaler value brp. You can find more information in the header * file linux/can/netlink.h. */ -static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt) +static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) { struct can_priv *priv = netdev_priv(dev); - const struct can_bittiming_const *btc = priv->bittiming_const; int tseg1, alltseg; u64 brp64; - if (!priv->bittiming_const) - return -ENOTSUPP; - tseg1 = bt->prop_seg + bt->phase_seg1; if (!bt->sjw) bt->sjw = 1; @@ -254,26 +249,29 @@ static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt) return 0; } -static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt) +static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) { - struct can_priv *priv = netdev_priv(dev); int err; /* Check if the CAN device has bit-timing parameters */ - if (priv->bittiming_const) { + if (!btc) + return -ENOTSUPP; - /* Non-expert mode? Check if the bitrate has been pre-defined */ - if (!bt->tq) - /* Determine bit-timing parameters */ - err = can_calc_bittiming(dev, bt); - else - /* Check bit-timing params and calculate proper brp */ - err = can_fixup_bittiming(dev, bt); - if (err) - return err; - } + /* + * Depending on the given can_bittiming parameter structure the CAN + * timing parameters are calculated based on the provided bitrate OR + * alternatively the CAN timing parameters (tq, prop_seg, etc.) are + * provided directly which are then checked and fixed up. + */ + if (!bt->tq && bt->bitrate) + err = can_calc_bittiming(dev, bt, btc); + else if (bt->tq && !bt->bitrate) + err = can_fixup_bittiming(dev, bt, btc); + else + err = -EINVAL; - return 0; + return err; } /* @@ -317,7 +315,9 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, BUG_ON(idx >= priv->echo_skb_max); /* check flag whether this packet has to be looped back */ - if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) { + if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK || + (skb->protocol != htons(ETH_P_CAN) && + skb->protocol != htons(ETH_P_CANFD))) { kfree_skb(skb); return; } @@ -329,7 +329,6 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, return; /* make settings for echo to reduce code in irq context */ - skb->protocol = htons(ETH_P_CAN); skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; skb->dev = dev; @@ -596,6 +595,39 @@ void free_candev(struct net_device *dev) EXPORT_SYMBOL_GPL(free_candev); /* + * changing MTU and control mode for CAN/CANFD devices + */ +int can_change_mtu(struct net_device *dev, int new_mtu) +{ + struct can_priv *priv = netdev_priv(dev); + + /* Do not allow changing the MTU while running */ + if (dev->flags & IFF_UP) + return -EBUSY; + + /* allow change of MTU according to the CANFD ability of the device */ + switch (new_mtu) { + case CAN_MTU: + priv->ctrlmode &= ~CAN_CTRLMODE_FD; + break; + + case CANFD_MTU: + if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD)) + return -EINVAL; + + priv->ctrlmode |= CAN_CTRLMODE_FD; + break; + + default: + return -EINVAL; + } + + dev->mtu = new_mtu; + return 0; +} +EXPORT_SYMBOL_GPL(can_change_mtu); + +/* * Common open function when the device gets opened. * * This function should be called in the open function of the device @@ -605,11 +637,19 @@ int open_candev(struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); - if (!priv->bittiming.tq && !priv->bittiming.bitrate) { + if (!priv->bittiming.bitrate) { netdev_err(dev, "bit-timing not yet defined\n"); return -EINVAL; } + /* For CAN FD the data bitrate has to be >= the arbitration bitrate */ + if ((priv->ctrlmode & CAN_CTRLMODE_FD) && + (!priv->data_bittiming.bitrate || + (priv->data_bittiming.bitrate < priv->bittiming.bitrate))) { + netdev_err(dev, "incorrect/missing data bit-timing\n"); + return -EINVAL; + } + /* Switch carrier on if device was stopped while in bus-off state */ if (!netif_carrier_ok(dev)) netif_carrier_on(dev); @@ -648,6 +688,10 @@ static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = { = { .len = sizeof(struct can_bittiming_const) }, [IFLA_CAN_CLOCK] = { .len = sizeof(struct can_clock) }, [IFLA_CAN_BERR_COUNTER] = { .len = sizeof(struct can_berr_counter) }, + [IFLA_CAN_DATA_BITTIMING] + = { .len = sizeof(struct can_bittiming) }, + [IFLA_CAN_DATA_BITTIMING_CONST] + = { .len = sizeof(struct can_bittiming_const) }, }; static int can_changelink(struct net_device *dev, @@ -666,9 +710,7 @@ static int can_changelink(struct net_device *dev, if (dev->flags & IFF_UP) return -EBUSY; memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); - if ((!bt.bitrate && !bt.tq) || (bt.bitrate && bt.tq)) - return -EINVAL; - err = can_get_bittiming(dev, &bt); + err = can_get_bittiming(dev, &bt, priv->bittiming_const); if (err) return err; memcpy(&priv->bittiming, &bt, sizeof(bt)); @@ -692,6 +734,12 @@ static int can_changelink(struct net_device *dev, return -EOPNOTSUPP; priv->ctrlmode &= ~cm->mask; priv->ctrlmode |= cm->flags; + + /* CAN_CTRLMODE_FD can only be set when driver supports FD */ + if (priv->ctrlmode & CAN_CTRLMODE_FD) + dev->mtu = CANFD_MTU; + else + dev->mtu = CAN_MTU; } if (data[IFLA_CAN_RESTART_MS]) { @@ -710,6 +758,27 @@ static int can_changelink(struct net_device *dev, return err; } + if (data[IFLA_CAN_DATA_BITTIMING]) { + struct can_bittiming dbt; + + /* Do not allow changing bittiming while running */ + if (dev->flags & IFF_UP) + return -EBUSY; + memcpy(&dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]), + sizeof(dbt)); + err = can_get_bittiming(dev, &dbt, priv->data_bittiming_const); + if (err) + return err; + memcpy(&priv->data_bittiming, &dbt, sizeof(dbt)); + + if (priv->do_set_data_bittiming) { + /* Finally, set the bit-timing registers */ + err = priv->do_set_data_bittiming(dev); + if (err) + return err; + } + } + return 0; } @@ -718,7 +787,8 @@ static size_t can_get_size(const struct net_device *dev) struct can_priv *priv = netdev_priv(dev); size_t size = 0; - size += nla_total_size(sizeof(struct can_bittiming)); /* IFLA_CAN_BITTIMING */ + if (priv->bittiming.bitrate) /* IFLA_CAN_BITTIMING */ + size += nla_total_size(sizeof(struct can_bittiming)); if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ size += nla_total_size(sizeof(struct can_bittiming_const)); size += nla_total_size(sizeof(struct can_clock)); /* IFLA_CAN_CLOCK */ @@ -727,6 +797,10 @@ static size_t can_get_size(const struct net_device *dev) size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ if (priv->do_get_berr_counter) /* IFLA_CAN_BERR_COUNTER */ size += nla_total_size(sizeof(struct can_berr_counter)); + if (priv->data_bittiming.bitrate) /* IFLA_CAN_DATA_BITTIMING */ + size += nla_total_size(sizeof(struct can_bittiming)); + if (priv->data_bittiming_const) /* IFLA_CAN_DATA_BITTIMING_CONST */ + size += nla_total_size(sizeof(struct can_bittiming_const)); return size; } @@ -740,19 +814,34 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) if (priv->do_get_state) priv->do_get_state(dev, &state); - if (nla_put(skb, IFLA_CAN_BITTIMING, - sizeof(priv->bittiming), &priv->bittiming) || + + if ((priv->bittiming.bitrate && + nla_put(skb, IFLA_CAN_BITTIMING, + sizeof(priv->bittiming), &priv->bittiming)) || + (priv->bittiming_const && nla_put(skb, IFLA_CAN_BITTIMING_CONST, sizeof(*priv->bittiming_const), priv->bittiming_const)) || + nla_put(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock) || nla_put_u32(skb, IFLA_CAN_STATE, state) || nla_put(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm) || nla_put_u32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms) || + (priv->do_get_berr_counter && !priv->do_get_berr_counter(dev, &bec) && - nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec))) + nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)) || + + (priv->data_bittiming.bitrate && + nla_put(skb, IFLA_CAN_DATA_BITTIMING, + sizeof(priv->data_bittiming), &priv->data_bittiming)) || + + (priv->data_bittiming_const && + nla_put(skb, IFLA_CAN_DATA_BITTIMING_CONST, + sizeof(*priv->data_bittiming_const), + priv->data_bittiming_const))) return -EMSGSIZE; + return 0; } |