diff options
Diffstat (limited to 'drivers/mtd/nand/raw/arasan-nand-controller.c')
-rw-r--r-- | drivers/mtd/nand/raw/arasan-nand-controller.c | 90 |
1 files changed, 57 insertions, 33 deletions
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c index 8c7537129674..3a52d77421d1 100644 --- a/drivers/mtd/nand/raw/arasan-nand-controller.c +++ b/drivers/mtd/nand/raw/arasan-nand-controller.c @@ -274,6 +274,37 @@ static int anfc_pkt_len_config(unsigned int len, unsigned int *steps, return 0; } +static int anfc_select_target(struct nand_chip *chip, int target) +{ + struct anand *anand = to_anand(chip); + struct arasan_nfc *nfc = to_anfc(chip->controller); + int ret; + + /* Update the controller timings and the potential ECC configuration */ + writel_relaxed(anand->timings, nfc->base + DATA_INTERFACE_REG); + + /* Update clock frequency */ + if (nfc->cur_clk != anand->clk) { + clk_disable_unprepare(nfc->controller_clk); + ret = clk_set_rate(nfc->controller_clk, anand->clk); + if (ret) { + dev_err(nfc->dev, "Failed to change clock rate\n"); + return ret; + } + + ret = clk_prepare_enable(nfc->controller_clk); + if (ret) { + dev_err(nfc->dev, + "Failed to re-enable the controller clock\n"); + return ret; + } + + nfc->cur_clk = anand->clk; + } + + return 0; +} + /* * When using the embedded hardware ECC engine, the controller is in charge of * feeding the engine with, first, the ECC residue present in the data array. @@ -402,6 +433,18 @@ static int anfc_read_page_hw_ecc(struct nand_chip *chip, u8 *buf, return 0; } +static int anfc_sel_read_page_hw_ecc(struct nand_chip *chip, u8 *buf, + int oob_required, int page) +{ + int ret; + + ret = anfc_select_target(chip, chip->cur_cs); + if (ret) + return ret; + + return anfc_read_page_hw_ecc(chip, buf, oob_required, page); +}; + static int anfc_write_page_hw_ecc(struct nand_chip *chip, const u8 *buf, int oob_required, int page) { @@ -462,6 +505,18 @@ static int anfc_write_page_hw_ecc(struct nand_chip *chip, const u8 *buf, return ret; } +static int anfc_sel_write_page_hw_ecc(struct nand_chip *chip, const u8 *buf, + int oob_required, int page) +{ + int ret; + + ret = anfc_select_target(chip, chip->cur_cs); + if (ret) + return ret; + + return anfc_write_page_hw_ecc(chip, buf, oob_required, page); +}; + /* NAND framework ->exec_op() hooks and related helpers */ static int anfc_parse_instructions(struct nand_chip *chip, const struct nand_subop *subop, @@ -770,37 +825,6 @@ static const struct nand_op_parser anfc_op_parser = NAND_OP_PARSER( NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)), ); -static int anfc_select_target(struct nand_chip *chip, int target) -{ - struct anand *anand = to_anand(chip); - struct arasan_nfc *nfc = to_anfc(chip->controller); - int ret; - - /* Update the controller timings and the potential ECC configuration */ - writel_relaxed(anand->timings, nfc->base + DATA_INTERFACE_REG); - - /* Update clock frequency */ - if (nfc->cur_clk != anand->clk) { - clk_disable_unprepare(nfc->controller_clk); - ret = clk_set_rate(nfc->controller_clk, anand->clk); - if (ret) { - dev_err(nfc->dev, "Failed to change clock rate\n"); - return ret; - } - - ret = clk_prepare_enable(nfc->controller_clk); - if (ret) { - dev_err(nfc->dev, - "Failed to re-enable the controller clock\n"); - return ret; - } - - nfc->cur_clk = anand->clk; - } - - return 0; -} - static int anfc_check_op(struct nand_chip *chip, const struct nand_operation *op) { @@ -1042,8 +1066,8 @@ static int anfc_init_hw_ecc_controller(struct arasan_nfc *nfc, if (!anand->bch) return -EINVAL; - ecc->read_page = anfc_read_page_hw_ecc; - ecc->write_page = anfc_write_page_hw_ecc; + ecc->read_page = anfc_sel_read_page_hw_ecc; + ecc->write_page = anfc_sel_write_page_hw_ecc; return 0; } |