diff options
Diffstat (limited to 'drivers/mtd/nand/fsl_elbc_nand.c')
| -rw-r--r-- | drivers/mtd/nand/fsl_elbc_nand.c | 37 |
1 files changed, 21 insertions, 16 deletions
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 80b5264f0a32..784293806110 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -75,6 +75,7 @@ struct fsl_elbc_fcm_ctrl { unsigned int use_mdr; /* Non zero if the MDR is to be set */ unsigned int oob; /* Non zero if operating on OOB data */ unsigned int counter; /* counter for the initializations */ + unsigned int max_bitflips; /* Saved during READ0 cmd */ }; /* These map to the positions used by the FCM hardware ECC generator */ @@ -253,6 +254,8 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) if (chip->ecc.mode != NAND_ECC_HW) return 0; + elbc_fcm_ctrl->max_bitflips = 0; + if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) { uint32_t lteccr = in_be32(&lbc->lteccr); /* @@ -262,11 +265,16 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) * bits 28-31 are uncorrectable errors, marked elsewhere. * for small page nand only 1 bit is used. * if the ELBC doesn't have the lteccr register it reads 0 + * FIXME: 4 bits can be corrected on NANDs with 2k pages, so + * count the number of sub-pages with bitflips and update + * ecc_stats.corrected accordingly. */ if (lteccr & 0x000F000F) out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */ - if (lteccr & 0x000F0000) + if (lteccr & 0x000F0000) { mtd->ecc_stats.corrected++; + elbc_fcm_ctrl->max_bitflips = 1; + } } return 0; @@ -738,26 +746,28 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) return 0; } -static int fsl_elbc_read_page(struct mtd_info *mtd, - struct nand_chip *chip, - uint8_t *buf, - int page) +static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) { + struct fsl_elbc_mtd *priv = chip->priv; + struct fsl_lbc_ctrl *ctrl = priv->ctrl; + struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand; + fsl_elbc_read_buf(mtd, buf, mtd->writesize); - fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize); + if (oob_required) + fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize); if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL) mtd->ecc_stats.failed++; - return 0; + return elbc_fcm_ctrl->max_bitflips; } /* ECC will be calculated automatically, and errors will be detected in * waitfunc. */ -static void fsl_elbc_write_page(struct mtd_info *mtd, - struct nand_chip *chip, - const uint8_t *buf) +static void fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) { fsl_elbc_write_buf(mtd, buf, mtd->writesize); fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -795,7 +805,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->bbt_md = &bbt_mirror_descr; /* set up nand options */ - chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR; + chip->options = NAND_NO_READRDY; chip->bbt_options = NAND_BBT_USE_FLASH; chip->controller = &elbc_fcm_ctrl->controller; @@ -814,11 +824,6 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->ecc.size = 512; chip->ecc.bytes = 3; chip->ecc.strength = 1; - /* - * FIXME: can hardware ecc correct 4 bitflips if page size is - * 2k? Then does hardware report number of corrections for this - * case? If so, ecc_stats reporting needs to be fixed as well. - */ } else { /* otherwise fall back to default software ECC */ chip->ecc.mode = NAND_ECC_SOFT; |