diff options
Diffstat (limited to 'drivers/mtd/nand/denali.c')
| -rw-r--r-- | drivers/mtd/nand/denali.c | 291 |
1 files changed, 126 insertions, 165 deletions
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 3087b0ba7b7f..5124f8ae8c04 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -10,20 +10,18 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ -#include <linux/interrupt.h> -#include <linux/delay.h> + +#include <linux/bitfield.h> +#include <linux/completion.h> #include <linux/dma-mapping.h> -#include <linux/wait.h> -#include <linux/mutex.h> -#include <linux/mtd/mtd.h> +#include <linux/interrupt.h> +#include <linux/io.h> #include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/rawnand.h> #include <linux/slab.h> +#include <linux/spinlock.h> #include "denali.h" @@ -31,9 +29,9 @@ MODULE_LICENSE("GPL"); #define DENALI_NAND_NAME "denali-nand" -/* Host Data/Command Interface */ -#define DENALI_HOST_ADDR 0x00 -#define DENALI_HOST_DATA 0x10 +/* for Indexed Addressing */ +#define DENALI_INDEXED_CTRL 0x00 +#define DENALI_INDEXED_DATA 0x10 #define DENALI_MAP00 (0 << 26) /* direct access to buffer */ #define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */ @@ -61,31 +59,55 @@ MODULE_LICENSE("GPL"); */ #define DENALI_CLK_X_MULT 6 -/* - * this macro allows us to convert from an MTD structure to our own - * device context (denali) structure. - */ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd) { return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand); } -static void denali_host_write(struct denali_nand_info *denali, - uint32_t addr, uint32_t data) +/* + * Direct Addressing - the slave address forms the control information (command + * type, bank, block, and page address). The slave data is the actual data to + * be transferred. This mode requires 28 bits of address region allocated. + */ +static u32 denali_direct_read(struct denali_nand_info *denali, u32 addr) +{ + return ioread32(denali->host + addr); +} + +static void denali_direct_write(struct denali_nand_info *denali, u32 addr, + u32 data) { - iowrite32(addr, denali->host + DENALI_HOST_ADDR); - iowrite32(data, denali->host + DENALI_HOST_DATA); + iowrite32(data, denali->host + addr); +} + +/* + * Indexed Addressing - address translation module intervenes in passing the + * control information. This mode reduces the required address range. The + * control information and transferred data are latched by the registers in + * the translation module. + */ +static u32 denali_indexed_read(struct denali_nand_info *denali, u32 addr) +{ + iowrite32(addr, denali->host + DENALI_INDEXED_CTRL); + return ioread32(denali->host + DENALI_INDEXED_DATA); +} + +static void denali_indexed_write(struct denali_nand_info *denali, u32 addr, + u32 data) +{ + iowrite32(addr, denali->host + DENALI_INDEXED_CTRL); + iowrite32(data, denali->host + DENALI_INDEXED_DATA); } /* * Use the configuration feature register to determine the maximum number of * banks that the hardware supports. */ -static void detect_max_banks(struct denali_nand_info *denali) +static void denali_detect_max_banks(struct denali_nand_info *denali) { uint32_t features = ioread32(denali->reg + FEATURES); - denali->max_banks = 1 << (features & FEATURES__N_BANKS); + denali->max_banks = 1 << FIELD_GET(FEATURES__N_BANKS, features); /* the encoding changed from rev 5.0 to 5.1 */ if (denali->revision < 0x0501) @@ -189,7 +211,7 @@ static uint32_t denali_wait_for_irq(struct denali_nand_info *denali, msecs_to_jiffies(1000)); if (!time_left) { dev_err(denali->dev, "timeout while waiting for irq 0x%x\n", - denali->irq_mask); + irq_mask); return 0; } @@ -208,73 +230,47 @@ static uint32_t denali_check_irq(struct denali_nand_info *denali) return irq_status; } -/* - * This helper function setups the registers for ECC and whether or not - * the spare area will be transferred. - */ -static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, - bool transfer_spare) -{ - int ecc_en_flag, transfer_spare_flag; - - /* set ECC, transfer spare bits if needed */ - ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; - transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; - - /* Enable spare area/ECC per user's request. */ - iowrite32(ecc_en_flag, denali->reg + ECC_ENABLE); - iowrite32(transfer_spare_flag, denali->reg + TRANSFER_SPARE_REG); -} - static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { struct denali_nand_info *denali = mtd_to_denali(mtd); + u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali); int i; - iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), - denali->host + DENALI_HOST_ADDR); - for (i = 0; i < len; i++) - buf[i] = ioread32(denali->host + DENALI_HOST_DATA); + buf[i] = denali->host_read(denali, addr); } static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { struct denali_nand_info *denali = mtd_to_denali(mtd); + u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali); int i; - iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), - denali->host + DENALI_HOST_ADDR); - for (i = 0; i < len; i++) - iowrite32(buf[i], denali->host + DENALI_HOST_DATA); + denali->host_write(denali, addr, buf[i]); } static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) { struct denali_nand_info *denali = mtd_to_denali(mtd); + u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali); uint16_t *buf16 = (uint16_t *)buf; int i; - iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), - denali->host + DENALI_HOST_ADDR); - for (i = 0; i < len / 2; i++) - buf16[i] = ioread32(denali->host + DENALI_HOST_DATA); + buf16[i] = denali->host_read(denali, addr); } static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) { struct denali_nand_info *denali = mtd_to_denali(mtd); + u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali); const uint16_t *buf16 = (const uint16_t *)buf; int i; - iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), - denali->host + DENALI_HOST_ADDR); - for (i = 0; i < len / 2; i++) - iowrite32(buf16[i], denali->host + DENALI_HOST_DATA); + denali->host_write(denali, addr, buf16[i]); } static uint8_t denali_read_byte(struct mtd_info *mtd) @@ -319,7 +315,7 @@ static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) if (ctrl & NAND_CTRL_CHANGE) denali_reset_irq(denali); - denali_host_write(denali, DENALI_BANK(denali) | type, dat); + denali->host_write(denali, DENALI_BANK(denali) | type, dat); } static int denali_dev_ready(struct mtd_info *mtd) @@ -389,7 +385,7 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd, return 0; } - max_bitflips = ecc_cor & ECC_COR_INFO__MAX_ERRORS; + max_bitflips = FIELD_GET(ECC_COR_INFO__MAX_ERRORS, ecc_cor); /* * The register holds the maximum of per-sector corrected bitflips. @@ -402,13 +398,6 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd, return max_bitflips; } -#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12) -#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET)) -#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK) -#define ECC_ERROR_UNCORRECTABLE(x) ((x) & ERR_CORRECTION_INFO__ERROR_TYPE) -#define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8) -#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO) - static int denali_sw_ecc_fixup(struct mtd_info *mtd, struct denali_nand_info *denali, unsigned long *uncor_ecc_flags, uint8_t *buf) @@ -426,18 +415,20 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, do { err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS); - err_sector = ECC_SECTOR(err_addr); - err_byte = ECC_BYTE(err_addr); + err_sector = FIELD_GET(ECC_ERROR_ADDRESS__SECTOR, err_addr); + err_byte = FIELD_GET(ECC_ERROR_ADDRESS__OFFSET, err_addr); err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO); - err_cor_value = ECC_CORRECTION_VALUE(err_cor_info); - err_device = ECC_ERR_DEVICE(err_cor_info); + err_cor_value = FIELD_GET(ERR_CORRECTION_INFO__BYTE, + err_cor_info); + err_device = FIELD_GET(ERR_CORRECTION_INFO__DEVICE, + err_cor_info); /* reset the bitflip counter when crossing ECC sector */ if (err_sector != prev_sector) bitflips = 0; - if (ECC_ERROR_UNCORRECTABLE(err_cor_info)) { + if (err_cor_info & ERR_CORRECTION_INFO__UNCOR) { /* * Check later if this is a real ECC error, or * an erased sector. @@ -467,12 +458,11 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, } prev_sector = err_sector; - } while (!ECC_LAST_ERR(err_cor_info)); + } while (!(err_cor_info & ERR_CORRECTION_INFO__LAST_ERR)); /* - * Once handle all ecc errors, controller will trigger a - * ECC_TRANSACTION_DONE interrupt, so here just wait for - * a while for this interrupt + * Once handle all ECC errors, controller will trigger an + * ECC_TRANSACTION_DONE interrupt. */ irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE); if (!(irq_status & INTR__ECC_TRANSACTION_DONE)) @@ -481,13 +471,6 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, return max_bitflips; } -/* programs the controller to either enable/disable DMA transfers */ -static void denali_enable_dma(struct denali_nand_info *denali, bool en) -{ - iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->reg + DMA_ENABLE); - ioread32(denali->reg + DMA_ENABLE); -} - static void denali_setup_dma64(struct denali_nand_info *denali, dma_addr_t dma_addr, int page, int write) { @@ -502,14 +485,14 @@ static void denali_setup_dma64(struct denali_nand_info *denali, * 1. setup transfer type, interrupt when complete, * burst len = 64 bytes, the number of pages */ - denali_host_write(denali, mode, - 0x01002000 | (64 << 16) | (write << 8) | page_count); + denali->host_write(denali, mode, + 0x01002000 | (64 << 16) | (write << 8) | page_count); /* 2. set memory low address */ - denali_host_write(denali, mode, dma_addr); + denali->host_write(denali, mode, lower_32_bits(dma_addr)); /* 3. set memory high address */ - denali_host_write(denali, mode, (uint64_t)dma_addr >> 32); + denali->host_write(denali, mode, upper_32_bits(dma_addr)); } static void denali_setup_dma32(struct denali_nand_info *denali, @@ -523,32 +506,23 @@ static void denali_setup_dma32(struct denali_nand_info *denali, /* DMA is a four step process */ /* 1. setup transfer type and # of pages */ - denali_host_write(denali, mode | page, - 0x2000 | (write << 8) | page_count); + denali->host_write(denali, mode | page, + 0x2000 | (write << 8) | page_count); /* 2. set memory high address bits 23:8 */ - denali_host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200); + denali->host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ - denali_host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); + denali->host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); /* 4. interrupt when complete, burst len = 64 bytes */ - denali_host_write(denali, mode | 0x14000, 0x2400); -} - -static void denali_setup_dma(struct denali_nand_info *denali, - dma_addr_t dma_addr, int page, int write) -{ - if (denali->caps & DENALI_CAP_DMA_64BIT) - denali_setup_dma64(denali, dma_addr, page, write); - else - denali_setup_dma32(denali, dma_addr, page, write); + denali->host_write(denali, mode | 0x14000, 0x2400); } static int denali_pio_read(struct denali_nand_info *denali, void *buf, size_t size, int page, int raw) { - uint32_t addr = DENALI_BANK(denali) | page; + u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page; uint32_t *buf32 = (uint32_t *)buf; uint32_t irq_status, ecc_err_mask; int i; @@ -560,9 +534,8 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf, denali_reset_irq(denali); - iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR); for (i = 0; i < size / 4; i++) - *buf32++ = ioread32(denali->host + DENALI_HOST_DATA); + *buf32++ = denali->host_read(denali, addr); irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC); if (!(irq_status & INTR__PAGE_XFER_INC)) @@ -577,16 +550,15 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf, static int denali_pio_write(struct denali_nand_info *denali, const void *buf, size_t size, int page, int raw) { - uint32_t addr = DENALI_BANK(denali) | page; + u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page; const uint32_t *buf32 = (uint32_t *)buf; uint32_t irq_status; int i; denali_reset_irq(denali); - iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR); for (i = 0; i < size / 4; i++) - iowrite32(*buf32++, denali->host + DENALI_HOST_DATA); + denali->host_write(denali, addr, *buf32++); irq_status = denali_wait_for_irq(denali, INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL); @@ -635,19 +607,19 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, ecc_err_mask = INTR__ECC_ERR; } - denali_enable_dma(denali, true); + iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE); denali_reset_irq(denali); - denali_setup_dma(denali, dma_addr, page, write); + denali->setup_dma(denali, dma_addr, page, write); - /* wait for operation to complete */ irq_status = denali_wait_for_irq(denali, irq_mask); if (!(irq_status & INTR__DMA_CMD_COMP)) ret = -EIO; else if (irq_status & ecc_err_mask) ret = -EBADMSG; - denali_enable_dma(denali, false); + iowrite32(0, denali->reg + DMA_ENABLE); + dma_unmap_single(denali->dev, dma_addr, size, dir); if (irq_status & INTR__ERASED_PAGE) @@ -659,7 +631,9 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, static int denali_data_xfer(struct denali_nand_info *denali, void *buf, size_t size, int page, int raw, int write) { - setup_ecc_for_xfer(denali, !raw, raw); + iowrite32(raw ? 0 : ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE); + iowrite32(raw ? TRANSFER_SPARE_REG__FLAG : 0, + denali->reg + TRANSFER_SPARE_REG); if (denali->dma_avail) return denali_dma_xfer(denali, buf, size, page, raw, write); @@ -970,8 +944,8 @@ static int denali_erase(struct mtd_info *mtd, int page) denali_reset_irq(denali); - denali_host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page, - DENALI_ERASE); + denali->host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page, + DENALI_ERASE); /* wait for erase to complete or failure to occur */ irq_status = denali_wait_for_irq(denali, @@ -1009,7 +983,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + ACC_CLKS); tmp &= ~ACC_CLKS__VALUE; - tmp |= acc_clks; + tmp |= FIELD_PREP(ACC_CLKS__VALUE, acc_clks); iowrite32(tmp, denali->reg + ACC_CLKS); /* tRWH -> RE_2_WE */ @@ -1018,7 +992,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + RE_2_WE); tmp &= ~RE_2_WE__VALUE; - tmp |= re_2_we; + tmp |= FIELD_PREP(RE_2_WE__VALUE, re_2_we); iowrite32(tmp, denali->reg + RE_2_WE); /* tRHZ -> RE_2_RE */ @@ -1027,16 +1001,22 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + RE_2_RE); tmp &= ~RE_2_RE__VALUE; - tmp |= re_2_re; + tmp |= FIELD_PREP(RE_2_RE__VALUE, re_2_re); iowrite32(tmp, denali->reg + RE_2_RE); - /* tWHR -> WE_2_RE */ - we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk); + /* + * tCCS, tWHR -> WE_2_RE + * + * With WE_2_RE properly set, the Denali controller automatically takes + * care of the delay; the driver need not set NAND_WAIT_TCCS. + */ + we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min), + t_clk); we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE); tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE); tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE; - tmp |= we_2_re; + tmp |= FIELD_PREP(TWHR2_AND_WE_2_RE__WE_2_RE, we_2_re); iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE); /* tADL -> ADDR_2_DATA */ @@ -1050,8 +1030,8 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, addr_2_data = min_t(int, addr_2_data, addr_2_data_mask); tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA); - tmp &= ~addr_2_data_mask; - tmp |= addr_2_data; + tmp &= ~TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA; + tmp |= FIELD_PREP(TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA, addr_2_data); iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA); /* tREH, tWH -> RDWR_EN_HI_CNT */ @@ -1061,7 +1041,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + RDWR_EN_HI_CNT); tmp &= ~RDWR_EN_HI_CNT__VALUE; - tmp |= rdwr_en_hi; + tmp |= FIELD_PREP(RDWR_EN_HI_CNT__VALUE, rdwr_en_hi); iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT); /* tRP, tWP -> RDWR_EN_LO_CNT */ @@ -1075,7 +1055,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + RDWR_EN_LO_CNT); tmp &= ~RDWR_EN_LO_CNT__VALUE; - tmp |= rdwr_en_lo; + tmp |= FIELD_PREP(RDWR_EN_LO_CNT__VALUE, rdwr_en_lo); iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT); /* tCS, tCEA -> CS_SETUP_CNT */ @@ -1086,7 +1066,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + CS_SETUP_CNT); tmp &= ~CS_SETUP_CNT__VALUE; - tmp |= cs_setup; + tmp |= FIELD_PREP(CS_SETUP_CNT__VALUE, cs_setup); iowrite32(tmp, denali->reg + CS_SETUP_CNT); return 0; @@ -1131,15 +1111,11 @@ static void denali_hw_init(struct denali_nand_info *denali) * if this value is 0, just let it be. */ denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES); - detect_max_banks(denali); + denali_detect_max_banks(denali); iowrite32(0x0F, denali->reg + RB_PIN_ENABLED); iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE); iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER); - - /* Should set value for these registers when init */ - iowrite32(0, denali->reg + TWO_ROW_ADDR_CYCLES); - iowrite32(1, denali->reg + ECC_ENABLE); } int denali_calc_ecc_bytes(int step_size, int strength) @@ -1211,22 +1187,6 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = { .free = denali_ooblayout_free, }; -/* initialize driver data structures */ -static void denali_drv_init(struct denali_nand_info *denali) -{ - /* - * the completion object will be used to notify - * the callee that the interrupt is done - */ - init_completion(&denali->complete); - - /* - * the spinlock will be used to synchronize the ISR with any - * element that might be access shared data (interrupt status) - */ - spin_lock_init(&denali->irq_lock); -} - static int denali_multidev_fixup(struct denali_nand_info *denali) { struct nand_chip *chip = &denali->nand; @@ -1282,15 +1242,17 @@ int denali_init(struct denali_nand_info *denali) { struct nand_chip *chip = &denali->nand; struct mtd_info *mtd = nand_to_mtd(chip); + u32 features = ioread32(denali->reg + FEATURES); int ret; mtd->dev.parent = denali->dev; denali_hw_init(denali); - denali_drv_init(denali); + + init_completion(&denali->complete); + spin_lock_init(&denali->irq_lock); denali_clear_irq_all(denali); - /* Request IRQ after all the hardware initialization is finished */ ret = devm_request_irq(denali->dev, denali->irq, denali_isr, IRQF_SHARED, DENALI_NAND_NAME, denali); if (ret) { @@ -1308,7 +1270,6 @@ int denali_init(struct denali_nand_info *denali) if (!mtd->name) mtd->name = "denali-nand"; - /* register the driver with the NAND core subsystem */ chip->select_chip = denali_select_chip; chip->read_byte = denali_read_byte; chip->write_byte = denali_write_byte; @@ -1317,15 +1278,18 @@ int denali_init(struct denali_nand_info *denali) chip->dev_ready = denali_dev_ready; chip->waitfunc = denali_waitfunc; + if (features & FEATURES__INDEX_ADDR) { + denali->host_read = denali_indexed_read; + denali->host_write = denali_indexed_write; + } else { + denali->host_read = denali_direct_read; + denali->host_write = denali_direct_write; + } + /* clk rate info is needed for setup_data_interface */ if (denali->clk_x_rate) chip->setup_data_interface = denali_setup_data_interface; - /* - * scan for NAND devices attached to the controller - * this is the first stage in a two step process to register - * with the nand subsystem - */ ret = nand_scan_ident(mtd, denali->max_banks, NULL); if (ret) goto disable_irq; @@ -1347,20 +1311,15 @@ int denali_init(struct denali_nand_info *denali) if (denali->dma_avail) { chip->options |= NAND_USE_BOUNCE_BUFFER; chip->buf_align = 16; + if (denali->caps & DENALI_CAP_DMA_64BIT) + denali->setup_dma = denali_setup_dma64; + else + denali->setup_dma = denali_setup_dma32; } - /* - * second stage of the NAND scan - * this stage requires information regarding ECC and - * bad block management. - */ - chip->bbt_options |= NAND_BBT_USE_FLASH; chip->bbt_options |= NAND_BBT_NO_OOB; - chip->ecc.mode = NAND_ECC_HW_SYNDROME; - - /* no subpage writes on denali */ chip->options |= NAND_NO_SUBPAGE_WRITE; ret = denali_ecc_setup(mtd, chip, denali); @@ -1373,12 +1332,15 @@ int denali_init(struct denali_nand_info *denali) "chosen ECC settings: step=%d, strength=%d, bytes=%d\n", chip->ecc.size, chip->ecc.strength, chip->ecc.bytes); - iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1), + iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) | + FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength), denali->reg + ECC_CORRECTION); iowrite32(mtd->erasesize / mtd->writesize, denali->reg + PAGES_PER_BLOCK); iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0, denali->reg + DEVICE_WIDTH); + iowrite32(chip->options & NAND_ROW_ADDR_3 ? 0 : TWO_ROW_ADDR_CYCLES__FLAG, + denali->reg + TWO_ROW_ADDR_CYCLES); iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE); iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE); @@ -1441,7 +1403,6 @@ disable_irq: } EXPORT_SYMBOL(denali_init); -/* driver exit point */ void denali_remove(struct denali_nand_info *denali) { struct mtd_info *mtd = nand_to_mtd(&denali->nand); |