diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-pci-core.c')
-rw-r--r-- | drivers/mmc/host/sdhci-pci-core.c | 31 |
1 files changed, 30 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 9552708846ca..be19785227fe 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -516,6 +516,7 @@ struct intel_host { int drv_strength; bool d3_retune; bool rpm_retune_ok; + bool needs_pwr_off; u32 glk_rx_ctrl1; u32 glk_tun_val; u32 active_ltr; @@ -643,9 +644,25 @@ out: static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd) { + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct intel_host *intel_host = sdhci_pci_priv(slot); int cntr; u8 reg; + /* + * Bus power may control card power, but a full reset still may not + * reset the power, whereas a direct write to SDHCI_POWER_CONTROL can. + * That might be needed to initialize correctly, if the card was left + * powered on previously. + */ + if (intel_host->needs_pwr_off) { + intel_host->needs_pwr_off = false; + if (mode != MMC_POWER_OFF) { + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + usleep_range(10000, 12500); + } + } + sdhci_set_power(host, mode, vdd); if (mode == MMC_POWER_OFF) @@ -958,7 +975,7 @@ static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot) slot->host->mmc->caps2 |= MMC_CAP2_CQE; if (slot->chip->pdev->device != PCI_DEVICE_ID_INTEL_GLK_EMMC) { - slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES, + slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES; slot->host->mmc_host_ops.hs400_enhanced_strobe = intel_hs400_enhanced_strobe; slot->host->mmc->caps2 |= MMC_CAP2_CQE_DCMD; @@ -1135,6 +1152,14 @@ static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot) return 0; } +static void byt_needs_pwr_off(struct sdhci_pci_slot *slot) +{ + struct intel_host *intel_host = sdhci_pci_priv(slot); + u8 reg = sdhci_readb(slot->host, SDHCI_POWER_CONTROL); + + intel_host->needs_pwr_off = reg & SDHCI_POWER_ON; +} + static int byt_sd_probe_slot(struct sdhci_pci_slot *slot) { byt_probe_slot(slot); @@ -1152,6 +1177,8 @@ static int byt_sd_probe_slot(struct sdhci_pci_slot *slot) slot->chip->pdev->subsystem_device == PCI_SUBDEVICE_ID_NI_78E3) slot->host->mmc->caps2 |= MMC_CAP2_AVOID_3_3V; + byt_needs_pwr_off(slot); + return 0; } @@ -1903,6 +1930,8 @@ static const struct pci_device_id pci_ids[] = { SDHCI_PCI_DEVICE(INTEL, CMLH_SD, intel_byt_sd), SDHCI_PCI_DEVICE(INTEL, JSL_EMMC, intel_glk_emmc), SDHCI_PCI_DEVICE(INTEL, JSL_SD, intel_byt_sd), + SDHCI_PCI_DEVICE(INTEL, LKF_EMMC, intel_glk_emmc), + SDHCI_PCI_DEVICE(INTEL, LKF_SD, intel_byt_sd), SDHCI_PCI_DEVICE(O2, 8120, o2), SDHCI_PCI_DEVICE(O2, 8220, o2), SDHCI_PCI_DEVICE(O2, 8221, o2), |