diff options
Diffstat (limited to 'drivers/mmc/host/pxamci.c')
| -rw-r--r-- | drivers/mmc/host/pxamci.c | 14 |
1 files changed, 8 insertions, 6 deletions
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index b00d67319058..bb47ff465c04 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -43,6 +43,9 @@ #define NR_SG 1 #define CLKRT_OFF (~0) +#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \ + || cpu_is_pxa935()) + struct pxamci_host { struct mmc_host *mmc; spinlock_t lock; @@ -457,7 +460,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk_enable(host->clk); if (ios->clock == 26000000) { - /* to support 26MHz on pxa300/pxa310 */ + /* to support 26MHz */ host->clkrt = 7; } else { /* to handle (19.5MHz, 26MHz) */ @@ -608,8 +611,7 @@ static int pxamci_probe(struct platform_device *pdev) * Calculate minimum clock rate, rounding up. */ mmc->f_min = (host->clkrate + 63) / 64; - mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000 - : host->clkrate; + mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate; pxamci_init_ocr(host); @@ -618,7 +620,7 @@ static int pxamci_probe(struct platform_device *pdev) if (!cpu_is_pxa25x()) { mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; host->cmdat |= CMDAT_SDIO_INT_EN; - if (cpu_is_pxa300() || cpu_is_pxa310()) + if (mmc_has_26MHz()) mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; } @@ -760,6 +762,8 @@ static int pxamci_remove(struct platform_device *pdev) if (mmc) { struct pxamci_host *host = mmc_priv(mmc); + mmc_remove_host(mmc); + if (host->pdata) { gpio_cd = host->pdata->gpio_card_detect; gpio_ro = host->pdata->gpio_card_ro; @@ -779,8 +783,6 @@ static int pxamci_remove(struct platform_device *pdev) if (host->pdata && host->pdata->exit) host->pdata->exit(&pdev->dev, mmc); - mmc_remove_host(mmc); - pxamci_stop_clock(host); writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD| END_CMD_RES|PRG_DONE|DATA_TRAN_DONE, |