diff options
Diffstat (limited to 'drivers/media/video/pwc')
| -rw-r--r-- | drivers/media/video/pwc/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/media/video/pwc/pwc-ctrl.c | 19 | ||||
| -rw-r--r-- | drivers/media/video/pwc/pwc-if.c | 847 | ||||
| -rw-r--r-- | drivers/media/video/pwc/pwc-misc.c | 4 | ||||
| -rw-r--r-- | drivers/media/video/pwc/pwc-uncompress.c | 11 | ||||
| -rw-r--r-- | drivers/media/video/pwc/pwc-v4l.c | 125 | ||||
| -rw-r--r-- | drivers/media/video/pwc/pwc.h | 76 |
7 files changed, 275 insertions, 808 deletions
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig index 8da42e4f1ba0..d63d0a850035 100644 --- a/drivers/media/video/pwc/Kconfig +++ b/drivers/media/video/pwc/Kconfig @@ -1,6 +1,7 @@ config USB_PWC tristate "USB Philips Cameras" depends on VIDEO_V4L2 + select VIDEOBUF2_VMALLOC ---help--- Say Y or M here if you want to use one of these Philips & OEM webcams: diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index 760b4de13adf..19221cbca8c3 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -511,13 +511,9 @@ unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned i return ret; } -#define BLACK_Y 0 -#define BLACK_U 128 -#define BLACK_V 128 - static void pwc_set_image_buffer_size(struct pwc_device *pdev) { - int i, factor = 0; + int factor = 0; /* for V4L2_PIX_FMT_YUV420 */ switch (pdev->pixfmt) { @@ -541,22 +537,9 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev) */ pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC; pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE; - - /* Fill buffers with black colors */ - for (i = 0; i < pwc_mbufs; i++) { - unsigned char *p = pdev->image_data + pdev->images[i].offset; - memset(p, BLACK_Y, pdev->view.x * pdev->view.y); - p += pdev->view.x * pdev->view.y; - memset(p, BLACK_U, pdev->view.x * pdev->view.y/4); - p += pdev->view.x * pdev->view.y/4; - memset(p, BLACK_V, pdev->view.x * pdev->view.y/4); - } } - - /* BRIGHTNESS */ - int pwc_get_brightness(struct pwc_device *pdev) { char buf; diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 3d3ff6030987..907db23fdb5d 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -116,6 +116,7 @@ MODULE_DEVICE_TABLE(usb, pwc_device_table); static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id); static void usb_pwc_disconnect(struct usb_interface *intf); +static void pwc_isoc_cleanup(struct pwc_device *pdev); static struct usb_driver pwc_driver = { .name = "Philips webcam", /* name */ @@ -129,8 +130,6 @@ static struct usb_driver pwc_driver = { static int default_size = PSZ_QCIF; static int default_fps = 10; -static int default_fbufs = 3; /* Default number of frame buffers */ - int pwc_mbufs = 2; /* Default number of mmap() buffers */ #ifdef CONFIG_USB_PWC_DEBUG int pwc_trace = PWC_DEBUG_LEVEL; #endif @@ -173,52 +172,6 @@ static struct video_device pwc_template = { /***************************************************************************/ /* Private functions */ -/* Here we want the physical address of the memory. - * This is used when initializing the contents of the area. - */ - - - -static void *pwc_rvmalloc(unsigned long size) -{ - void * mem; - unsigned long adr; - - mem=vmalloc_32(size); - if (!mem) - return NULL; - - memset(mem, 0, size); /* Clear the ram out, no junk to the user */ - adr=(unsigned long) mem; - while (size > 0) - { - SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - return mem; -} - -static void pwc_rvfree(void * mem, unsigned long size) -{ - unsigned long adr; - - if (!mem) - return; - - adr=(unsigned long) mem; - while ((long) size > 0) - { - ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree(mem); -} - - - - static int pwc_allocate_buffers(struct pwc_device *pdev) { int i, err; @@ -239,30 +192,6 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) } } - /* Allocate frame buffer structure */ - if (pdev->fbuf == NULL) { - kbuf = kzalloc(default_fbufs * sizeof(struct pwc_frame_buf), GFP_KERNEL); - if (kbuf == NULL) { - PWC_ERROR("Failed to allocate frame buffer structure.\n"); - return -ENOMEM; - } - PWC_DEBUG_MEMORY("Allocated frame buffer structure at %p.\n", kbuf); - pdev->fbuf = kbuf; - } - - /* create frame buffers, and make circular ring */ - for (i = 0; i < default_fbufs; i++) { - if (pdev->fbuf[i].data == NULL) { - kbuf = vzalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */ - if (kbuf == NULL) { - PWC_ERROR("Failed to allocate frame buffer %d.\n", i); - return -ENOMEM; - } - PWC_DEBUG_MEMORY("Allocated frame buffer %d at %p.\n", i, kbuf); - pdev->fbuf[i].data = kbuf; - } - } - /* Allocate decompressor table space */ if (DEVICE_USE_CODEC1(pdev->type)) err = pwc_dec1_alloc(pdev); @@ -274,25 +203,6 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) return err; } - /* Allocate image buffer; double buffer for mmap() */ - kbuf = pwc_rvmalloc(pwc_mbufs * pdev->len_per_image); - if (kbuf == NULL) { - PWC_ERROR("Failed to allocate image buffer(s). needed (%d)\n", - pwc_mbufs * pdev->len_per_image); - return -ENOMEM; - } - PWC_DEBUG_MEMORY("Allocated image buffer at %p.\n", kbuf); - pdev->image_data = kbuf; - for (i = 0; i < pwc_mbufs; i++) { - pdev->images[i].offset = i * pdev->len_per_image; - pdev->images[i].vma_use_count = 0; - } - for (; i < MAX_IMAGES; i++) { - pdev->images[i].offset = 0; - } - - kbuf = NULL; - PWC_DEBUG_MEMORY("<< pwc_allocate_buffers()\n"); return 0; } @@ -311,19 +221,6 @@ static void pwc_free_buffers(struct pwc_device *pdev) pdev->sbuf[i].data = NULL; } - /* The same for frame buffers */ - if (pdev->fbuf != NULL) { - for (i = 0; i < default_fbufs; i++) { - if (pdev->fbuf[i].data != NULL) { - PWC_DEBUG_MEMORY("Freeing frame buffer %d at %p.\n", i, pdev->fbuf[i].data); - vfree(pdev->fbuf[i].data); - pdev->fbuf[i].data = NULL; - } - } - kfree(pdev->fbuf); - pdev->fbuf = NULL; - } - /* Intermediate decompression buffer & tables */ if (pdev->decompress_data != NULL) { PWC_DEBUG_MEMORY("Freeing decompression buffer at %p.\n", pdev->decompress_data); @@ -331,226 +228,23 @@ static void pwc_free_buffers(struct pwc_device *pdev) pdev->decompress_data = NULL; } - /* Release image buffers */ - if (pdev->image_data != NULL) { - PWC_DEBUG_MEMORY("Freeing image buffer at %p.\n", pdev->image_data); - pwc_rvfree(pdev->image_data, pwc_mbufs * pdev->len_per_image); - } - pdev->image_data = NULL; - PWC_DEBUG_MEMORY("Leaving free_buffers().\n"); } -/* The frame & image buffer mess. - - Yes, this is a mess. Well, it used to be simple, but alas... In this - module, 3 buffers schemes are used to get the data from the USB bus to - the user program. The first scheme involves the ISO buffers (called thus - since they transport ISO data from the USB controller), and not really - interesting. Suffices to say the data from this buffer is quickly - gathered in an interrupt handler (pwc_isoc_handler) and placed into the - frame buffer. - - The frame buffer is the second scheme, and is the central element here. - It collects the data from a single frame from the camera (hence, the - name). Frames are delimited by the USB camera with a short USB packet, - so that's easy to detect. The frame buffers form a list that is filled - by the camera+USB controller and drained by the user process through - either read() or mmap(). - - The image buffer is the third scheme, in which frames are decompressed - and converted into planar format. For mmap() there is more than - one image buffer available. - - The frame buffers provide the image buffering. In case the user process - is a bit slow, this introduces lag and some undesired side-effects. - The problem arises when the frame buffer is full. I used to drop the last - frame, which makes the data in the queue stale very quickly. But dropping - the frame at the head of the queue proved to be a litte bit more difficult. - I tried a circular linked scheme, but this introduced more problems than - it solved. - - Because filling and draining are completely asynchronous processes, this - requires some fiddling with pointers and mutexes. - - Eventually, I came up with a system with 2 lists: an 'empty' frame list - and a 'full' frame list: - * Initially, all frame buffers but one are on the 'empty' list; the one - remaining buffer is our initial fill frame. - * If a frame is needed for filling, we try to take it from the 'empty' - list, unless that list is empty, in which case we take the buffer at - the head of the 'full' list. - * When our fill buffer has been filled, it is appended to the 'full' - list. - * If a frame is needed by read() or mmap(), it is taken from the head of - the 'full' list, handled, and then appended to the 'empty' list. If no - buffer is present on the 'full' list, we wait. - The advantage is that the buffer that is currently being decompressed/ - converted, is on neither list, and thus not in our way (any other scheme - I tried had the problem of old data lingering in the queue). - - Whatever strategy you choose, it always remains a tradeoff: with more - frame buffers the chances of a missed frame are reduced. On the other - hand, on slower machines it introduces lag because the queue will - always be full. - */ - -/** - \brief Find next frame buffer to fill. Take from empty or full list, whichever comes first. - */ -static int pwc_next_fill_frame(struct pwc_device *pdev) +struct pwc_frame_buf *pwc_get_next_fill_buf(struct pwc_device *pdev) { - int ret; - unsigned long flags; - - ret = 0; - spin_lock_irqsave(&pdev->ptrlock, flags); - if (pdev->fill_frame != NULL) { - /* append to 'full' list */ - if (pdev->full_frames == NULL) { - pdev->full_frames = pdev->fill_frame; - pdev->full_frames_tail = pdev->full_frames; - } - else { - pdev->full_frames_tail->next = pdev->fill_frame; - pdev->full_frames_tail = pdev->fill_frame; - } - } - if (pdev->empty_frames != NULL) { - /* We have empty frames available. That's easy */ - pdev->fill_frame = pdev->empty_frames; - pdev->empty_frames = pdev->empty_frames->next; - } - else { - /* Hmm. Take it from the full list */ - /* sanity check */ - if (pdev->full_frames == NULL) { - PWC_ERROR("Neither empty or full frames available!\n"); - spin_unlock_irqrestore(&pdev->ptrlock, flags); - return -EINVAL; - } - pdev->fill_frame = pdev->full_frames; - pdev->full_frames = pdev->full_frames->next; - ret = 1; - } - pdev->fill_frame->next = NULL; - spin_unlock_irqrestore(&pdev->ptrlock, flags); - return ret; -} - - -/** - \brief Reset all buffers, pointers and lists, except for the image_used[] buffer. - - If the image_used[] buffer is cleared too, mmap()/VIDIOCSYNC will run into trouble. - */ -static void pwc_reset_buffers(struct pwc_device *pdev) -{ - int i; - unsigned long flags; - - PWC_DEBUG_MEMORY(">> %s __enter__\n", __func__); - - spin_lock_irqsave(&pdev->ptrlock, flags); - pdev->full_frames = NULL; - pdev->full_frames_tail = NULL; - for (i = 0; i < default_fbufs; i++) { - pdev->fbuf[i].filled = 0; - if (i > 0) - pdev->fbuf[i].next = &pdev->fbuf[i - 1]; - else - pdev->fbuf->next = NULL; - } - pdev->empty_frames = &pdev->fbuf[default_fbufs - 1]; - pdev->empty_frames_tail = pdev->fbuf; - pdev->read_frame = NULL; - pdev->fill_frame = pdev->empty_frames; - pdev->empty_frames = pdev->empty_frames->next; - - pdev->image_read_pos = 0; - pdev->fill_image = 0; - spin_unlock_irqrestore(&pdev->ptrlock, flags); - - PWC_DEBUG_MEMORY("<< %s __leaving__\n", __func__); -} - - -/** - \brief Do all the handling for getting one frame: get pointer, decompress, advance pointers. - */ -int pwc_handle_frame(struct pwc_device *pdev) -{ - int ret = 0; - unsigned long flags; - - spin_lock_irqsave(&pdev->ptrlock, flags); - /* First grab our read_frame; this is removed from all lists, so - we can release the lock after this without problems */ - if (pdev->read_frame != NULL) { - /* This can't theoretically happen */ - PWC_ERROR("Huh? Read frame still in use?\n"); - spin_unlock_irqrestore(&pdev->ptrlock, flags); - return ret; - } - - - if (pdev->full_frames == NULL) { - PWC_ERROR("Woops. No frames ready.\n"); - } - else { - pdev->read_frame = pdev->full_frames; - pdev->full_frames = pdev->full_frames->next; - pdev->read_frame->next = NULL; - } - - if (pdev->read_frame != NULL) { - /* Decompression is a lengthy process, so it's outside of the lock. - This gives the isoc_handler the opportunity to fill more frames - in the mean time. - */ - spin_unlock_irqrestore(&pdev->ptrlock, flags); - ret = pwc_decompress(pdev); - spin_lock_irqsave(&pdev->ptrlock, flags); - - /* We're done with read_buffer, tack it to the end of the empty buffer list */ - if (pdev->empty_frames == NULL) { - pdev->empty_frames = pdev->read_frame; - pdev->empty_frames_tail = pdev->empty_frames; - } - else { - pdev->empty_frames_tail->next = pdev->read_frame; - pdev->empty_frames_tail = pdev->read_frame; - } - pdev->read_frame = NULL; - } - spin_unlock_irqrestore(&pdev->ptrlock, flags); - return ret; -} - -/** - \brief Advance pointers of image buffer (after each user request) -*/ -void pwc_next_image(struct pwc_device *pdev) -{ - pdev->image_used[pdev->fill_image] = 0; - pdev->fill_image = (pdev->fill_image + 1) % pwc_mbufs; -} - -/** - * Print debug information when a frame is discarded because all of our buffer - * is full - */ -static void pwc_frame_dumped(struct pwc_device *pdev) -{ - pdev->vframes_dumped++; - if (pdev->vframe_count < FRAME_LOWMARK) - return; - - if (pdev->vframes_dumped < 20) - PWC_DEBUG_FLOW("Dumping frame %d\n", pdev->vframe_count); - else if (pdev->vframes_dumped == 20) - PWC_DEBUG_FLOW("Dumping frame %d (last message)\n", - pdev->vframe_count); + unsigned long flags = 0; + struct pwc_frame_buf *buf = NULL; + + spin_lock_irqsave(&pdev->queued_bufs_lock, flags); + if (list_empty(&pdev->queued_bufs)) + goto leave; + + buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf, list); + list_del(&buf->list); +leave: + spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags); + return buf; } static void pwc_snapshot_button(struct pwc_device *pdev, int down) @@ -570,9 +264,9 @@ static void pwc_snapshot_button(struct pwc_device *pdev, int down) #endif } -static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_buf *fbuf) +static void pwc_frame_complete(struct pwc_device *pdev) { - int awake = 0; + struct pwc_frame_buf *fbuf = pdev->fill_buf; /* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus frames on the USB wire after an exposure change. This conditition is @@ -584,7 +278,6 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_ if (ptr[1] == 1 && ptr[0] & 0x10) { PWC_TRACE("Hyundai CMOS sensor bug. Dropping frame.\n"); pdev->drop_frames += 2; - pdev->vframes_error++; } if ((ptr[0] ^ pdev->vmirror) & 0x01) { pwc_snapshot_button(pdev, ptr[0] & 0x01); @@ -607,8 +300,7 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_ */ if (fbuf->filled == 4) pdev->drop_frames++; - } - else if (pdev->type == 740 || pdev->type == 720) { + } else if (pdev->type == 740 || pdev->type == 720) { unsigned char *ptr = (unsigned char *)fbuf->data; if ((ptr[0] ^ pdev->vmirror) & 0x01) { pwc_snapshot_button(pdev, ptr[0] & 0x01); @@ -616,33 +308,23 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_ pdev->vmirror = ptr[0] & 0x03; } - /* In case we were instructed to drop the frame, do so silently. - The buffer pointers are not updated either (but the counters are reset below). - */ - if (pdev->drop_frames > 0) + /* In case we were instructed to drop the frame, do so silently. */ + if (pdev->drop_frames > 0) { pdev->drop_frames--; - else { + } else { /* Check for underflow first */ if (fbuf->filled < pdev->frame_total_size) { PWC_DEBUG_FLOW("Frame buffer underflow (%d bytes);" " discarded.\n", fbuf->filled); - pdev->vframes_error++; - } - else { - /* Send only once per EOF */ - awake = 1; /* delay wake_ups */ - - /* Find our next frame to fill. This will always succeed, since we - * nick a frame from either empty or full list, but if we had to - * take it from the full list, it means a frame got dropped. - */ - if (pwc_next_fill_frame(pdev)) - pwc_frame_dumped(pdev); - + } else { + fbuf->vb.v4l2_buf.field = V4L2_FIELD_NONE; + fbuf->vb.v4l2_buf.sequence = pdev->vframe_count; + vb2_buffer_done(&fbuf->vb, VB2_BUF_STATE_DONE); + pdev->fill_buf = NULL; + pdev->vsync = 0; } } /* !drop_frames */ pdev->vframe_count++; - return awake; } /* This gets called for the Isochronous pipe (video). This is done in @@ -650,24 +332,20 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_ */ static void pwc_isoc_handler(struct urb *urb) { - struct pwc_device *pdev; + struct pwc_device *pdev = (struct pwc_device *)urb->context; int i, fst, flen; - int awake; - struct pwc_frame_buf *fbuf; - unsigned char *fillptr = NULL, *iso_buf = NULL; - - awake = 0; - pdev = (struct pwc_device *)urb->context; - if (pdev == NULL) { - PWC_ERROR("isoc_handler() called with NULL device?!\n"); - return; - } + unsigned char *iso_buf = NULL; - if (urb->status == -ENOENT || urb->status == -ECONNRESET) { + if (urb->status == -ENOENT || urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN) { PWC_DEBUG_OPEN("URB (%p) unlinked %ssynchronuously.\n", urb, urb->status == -ENOENT ? "" : "a"); return; } - if (urb->status != -EINPROGRESS && urb->status != 0) { + + if (pdev->fill_buf == NULL) + pdev->fill_buf = pwc_get_next_fill_buf(pdev); + + if (urb->status != 0) { const char *errmsg; errmsg = "Unknown"; @@ -679,29 +357,21 @@ static void pwc_isoc_handler(struct urb *urb) case -EILSEQ: errmsg = "CRC/Timeout (could be anything)"; break; case -ETIME: errmsg = "Device does not respond"; break; } - PWC_DEBUG_FLOW("pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg); - /* Give up after a number of contiguous errors on the USB bus. - Appearantly something is wrong so we simulate an unplug event. - */ + PWC_ERROR("pwc_isoc_handler() called with status %d [%s].\n", + urb->status, errmsg); + /* Give up after a number of contiguous errors */ if (++pdev->visoc_errors > MAX_ISOC_ERRORS) { - PWC_INFO("Too many ISOC errors, bailing out.\n"); - pdev->error_status = EIO; - awake = 1; - wake_up_interruptible(&pdev->frameq); + PWC_ERROR("Too many ISOC errors, bailing out.\n"); + if (pdev->fill_buf) { + vb2_buffer_done(&pdev->fill_buf->vb, + VB2_BUF_STATE_ERROR); + pdev->fill_buf = NULL; + } } - goto handler_end; // ugly, but practical - } - - fbuf = pdev->fill_frame; - if (fbuf == NULL) { - PWC_ERROR("pwc_isoc_handler without valid fill frame.\n"); - awake = 1; + pdev->vsync = 0; /* Drop the current frame */ goto handler_end; } - else { - fillptr = fbuf->data + fbuf->filled; - } /* Reset ISOC error counter. We did get here, after all. */ pdev->visoc_errors = 0; @@ -715,65 +385,50 @@ static void pwc_isoc_handler(struct urb *urb) fst = urb->iso_frame_desc[i].status; flen = urb->iso_frame_desc[i].actual_length; iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset; - if (fst == 0) { - if (flen > 0) { /* if valid data... */ - if (pdev->vsync > 0) { /* ...and we are not sync-hunting... */ - pdev->vsync = 2; - - /* ...copy data to frame buffer, if possible */ - if (flen + fbuf->filled > pdev->frame_total_size) { - PWC_DEBUG_FLOW("Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size); - pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */ - pdev->vframes_error++; - } - else { - memmove(fillptr, iso_buf, flen); - fillptr += flen; - } - } + if (fst != 0) { + PWC_ERROR("Iso frame %d has error %d\n", i, fst); + continue; + } + if (flen > 0 && pdev->vsync) { + struct pwc_frame_buf *fbuf = pdev->fill_buf; + + if (pdev->vsync == 1) { + do_gettimeofday(&fbuf->vb.v4l2_buf.timestamp); + pdev->vsync = 2; + } + + if (flen + fbuf->filled > pdev->frame_total_size) { + PWC_ERROR("Frame overflow (%d > %d)\n", + flen + fbuf->filled, + pdev->frame_total_size); + pdev->vsync = 0; /* Let's wait for an EOF */ + } else { + memcpy(fbuf->data + fbuf->filled, iso_buf, + flen); fbuf->filled += flen; - } /* ..flen > 0 */ - - if (flen < pdev->vlast_packet_size) { - /* Shorter packet... We probably have the end of an image-frame; - wake up read() process and let select()/poll() do something. - Decompression is done in user time over there. - */ - if (pdev->vsync == 2) { - if (pwc_rcv_short_packet(pdev, fbuf)) { - awake = 1; - fbuf = pdev->fill_frame; - } - } - fbuf->filled = 0; - fillptr = fbuf->data; + } + } + if (flen < pdev->vlast_packet_size) { + /* Shorter packet... end of frame */ + if (pdev->vsync == 2) + pwc_frame_complete(pdev); + if (pdev->fill_buf == NULL) + pdev->fill_buf = pwc_get_next_fill_buf(pdev); + if (pdev->fill_buf) { + pdev->fill_buf->filled = 0; pdev->vsync = 1; } - - pdev->vlast_packet_size = flen; - } /* ..status == 0 */ - else { - /* This is normally not interesting to the user, unless - * you are really debugging something, default = 0 */ - static int iso_error; - iso_error++; - if (iso_error < 20) - PWC_DEBUG_FLOW("Iso frame %d of USB has error %d\n", i, fst); } + pdev->vlast_packet_size = flen; } handler_end: - if (awake) - wake_up_interruptible(&pdev->frameq); - - urb->dev = pdev->udev; i = usb_submit_urb(urb, GFP_ATOMIC); if (i != 0) PWC_ERROR("Error (%d) re-submitting urb in pwc_isoc_handler.\n", i); } - -int pwc_isoc_init(struct pwc_device *pdev) +static int pwc_isoc_init(struct pwc_device *pdev) { struct usb_device *udev; struct urb *urb; @@ -784,6 +439,8 @@ int pwc_isoc_init(struct pwc_device *pdev) if (pdev->iso_init) return 0; pdev->vsync = 0; + pdev->fill_buf = NULL; + pdev->vframe_count = 0; udev = pdev->udev; /* Get the current alternate interface, adjust packet size */ @@ -904,7 +561,7 @@ static void pwc_iso_free(struct pwc_device *pdev) } } -void pwc_isoc_cleanup(struct pwc_device *pdev) +static void pwc_isoc_cleanup(struct pwc_device *pdev) { PWC_DEBUG_OPEN(">> pwc_isoc_cleanup()\n"); @@ -926,6 +583,22 @@ void pwc_isoc_cleanup(struct pwc_device *pdev) PWC_DEBUG_OPEN("<< pwc_isoc_cleanup()\n"); } +/* + * Release all queued buffers, no need to take queued_bufs_lock, since all + * iso urbs have been killed when we're called so pwc_isoc_handler won't run. + */ +static void pwc_cleanup_queued_bufs(struct pwc_device *pdev) +{ + while (!list_empty(&pdev->queued_bufs)) { + struct pwc_frame_buf *buf; + + buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf, + list); + list_del(&buf->list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } +} + /********* * sysfs *********/ @@ -1086,12 +759,6 @@ static int pwc_video_open(struct file *file) } /* Reset buffers & parameters */ - pwc_reset_buffers(pdev); - for (i = 0; i < pwc_mbufs; i++) - pdev->image_used[i] = 0; - pdev->vframe_count = 0; - pdev->vframes_dumped = 0; - pdev->vframes_error = 0; pdev->visoc_errors = 0; pdev->error_status = 0; pwc_construct(pdev); /* set min/max sizes correct */ @@ -1161,19 +828,12 @@ static int pwc_video_close(struct file *file) if (pdev->vopen == 0) PWC_DEBUG_MODULE("video_close() called on closed device?\n"); - /* Dump statistics, but only if a reasonable amount of frames were - processed (to prevent endless log-entries in case of snap-shot - programs) - */ - if (pdev->vframe_count > 20) - PWC_DEBUG_MODULE("Closing video device: %d frames received, dumped %d frames, %d frames with errors.\n", pdev->vframe_count, pdev->vframes_dumped, pdev->vframes_error); - if (DEVICE_USE_CODEC1(pdev->type)) pwc_dec1_exit(); else pwc_dec23_exit(); - pwc_isoc_cleanup(pdev); + vb2_queue_release(&pdev->vb_queue); pwc_free_buffers(pdev); /* Turn off LEDS and power down camera, but only when not unplugged */ @@ -1193,182 +853,155 @@ static int pwc_video_close(struct file *file) return 0; } -/* - * FIXME: what about two parallel reads ???? - * ANSWER: Not supported. You can't open the device more than once, - despite what the V4L1 interface says. First, I don't see - the need, second there's no mechanism of alerting the - 2nd/3rd/... process of events like changing image size. - And I don't see the point of blocking that for the - 2nd/3rd/... process. - In multi-threaded environments reading parallel from any - device is tricky anyhow. - */ - static ssize_t pwc_video_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) + size_t count, loff_t *ppos) { struct video_device *vdev = file->private_data; - struct pwc_device *pdev; - int noblock = file->f_flags & O_NONBLOCK; - DECLARE_WAITQUEUE(wait, current); - int bytes_to_read, rv = 0; - void *image_buffer_addr; + struct pwc_device *pdev = video_get_drvdata(vdev); - PWC_DEBUG_READ("pwc_video_read(vdev=0x%p, buf=%p, count=%zd) called.\n", - vdev, buf, count); - pdev = video_get_drvdata(vdev); + if (pdev->error_status) + return -pdev->error_status; - if (pdev->error_status) { - rv = -pdev->error_status; /* Something happened, report what. */ - goto err_out; - } + return vb2_read(&pdev->vb_queue, buf, count, ppos, + file->f_flags & O_NONBLOCK); +} - /* Start the stream (if not already started) */ - rv = pwc_isoc_init(pdev); - if (rv) - goto err_out; - - /* In case we're doing partial reads, we don't have to wait for a frame */ - if (pdev->image_read_pos == 0) { - /* Do wait queueing according to the (doc)book */ - add_wait_queue(&pdev->frameq, &wait); - while (pdev->full_frames == NULL) { - /* Check for unplugged/etc. here */ - if (pdev->error_status) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - rv = -pdev->error_status ; - goto err_out; - } - if (noblock) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - rv = -EWOULDBLOCK; - goto err_out; - } - if (signal_pending(current)) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - rv = -ERESTARTSYS; - goto err_out; - } - mutex_unlock(&pdev->modlock); - schedule(); - set_current_state(TASK_INTERRUPTIBLE); - mutex_lock(&pdev->modlock); - } - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); +static unsigned int pwc_video_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev = video_get_drvdata(vdev); - /* Decompress and release frame */ - rv = pwc_handle_frame(pdev); - if (rv) - goto err_out; - } + if (pdev->error_status) + return POLL_ERR; - PWC_DEBUG_READ("Copying data to user space.\n"); - if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) - bytes_to_read = pdev->frame_size + sizeof(struct pwc_raw_frame); - else - bytes_to_read = pdev->view.size; - - /* copy bytes to user space; we allow for partial reads */ - if (count + pdev->image_read_pos > bytes_to_read) - count = bytes_to_read - pdev->image_read_pos; - image_buffer_addr = pdev->image_data; - image_buffer_addr += pdev->images[pdev->fill_image].offset; - image_buffer_addr += pdev->image_read_pos; - if (copy_to_user(buf, image_buffer_addr, count)) { - rv = -EFAULT; - goto err_out; - } - pdev->image_read_pos += count; - if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */ - pdev->image_read_pos = 0; - pwc_next_image(pdev); - } - return count; -err_out: - return rv; + return vb2_poll(&pdev->vb_queue, file, wait); } -static unsigned int pwc_video_poll(struct file *file, poll_table *wait) +static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) { struct video_device *vdev = file->private_data; - struct pwc_device *pdev; - int ret; + struct pwc_device *pdev = video_get_drvdata(vdev); - pdev = video_get_drvdata(vdev); + return vb2_mmap(&pdev->vb_queue, vma); +} - /* Start the stream (if not already started) */ - ret = pwc_isoc_init(pdev); - if (ret) - return ret; +/***************************************************************************/ +/* Videobuf2 operations */ + +static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned long sizes[], + void *alloc_ctxs[]) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); - poll_wait(file, &pdev->frameq, wait); + if (*nbuffers < MIN_FRAMES) + *nbuffers = MIN_FRAMES; + else if (*nbuffers > MAX_FRAMES) + *nbuffers = MAX_FRAMES; + + *nplanes = 1; + + sizes[0] = PAGE_ALIGN((pdev->abs_max.x * pdev->abs_max.y * 3) / 2); + + return 0; +} + +static int buffer_init(struct vb2_buffer *vb) +{ + struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb); + + /* need vmalloc since frame buffer > 128K */ + buf->data = vzalloc(PWC_FRAME_SIZE); + if (buf->data == NULL) + return -ENOMEM; + + return 0; +} + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue); + + /* Don't allow queing new buffers after device disconnection */ if (pdev->error_status) - return POLLERR; - if (pdev->full_frames != NULL) /* we have frames waiting */ - return (POLLIN | POLLRDNORM); + return -pdev->error_status; return 0; } -static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) +static int buffer_finish(struct vb2_buffer *vb) { - struct video_device *vdev = file->private_data; - struct pwc_device *pdev; - unsigned long start; - unsigned long size; - unsigned long page, pos = 0; - int index; + struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue); + struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb); - PWC_DEBUG_MEMORY(">> %s\n", __func__); - pdev = video_get_drvdata(vdev); - size = vma->vm_end - vma->vm_start; - start = vma->vm_start; + /* + * Application has called dqbuf and is getting back a buffer we've + * filled, take the pwc data we've stored in buf->data and decompress + * it into a usable format, storing the result in the vb2_buffer + */ + return pwc_decompress(pdev, buf); +} + +static void buffer_cleanup(struct vb2_buffer *vb) +{ + struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb); + + vfree(buf->data); +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue); + struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb); + unsigned long flags = 0; + + spin_lock_irqsave(&pdev->queued_bufs_lock, flags); + list_add_tail(&buf->list, &pdev->queued_bufs); + spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags); +} + +static int start_streaming(struct vb2_queue *vq) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + + return pwc_isoc_init(pdev); +} + +static int stop_streaming(struct vb2_queue *vq) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + + pwc_isoc_cleanup(pdev); + pwc_cleanup_queued_bufs(pdev); - /* Find the idx buffer for this mapping */ - for (index = 0; index < pwc_mbufs; index++) { - pos = pdev->images[index].offset; - if ((pos>>PAGE_SHIFT) == vma->vm_pgoff) - break; - } - if (index == MAX_IMAGES) - return -EINVAL; - if (index == 0) { - /* - * Special case for v4l1. In v4l1, we map only one big buffer, - * but in v4l2 each buffer is mapped - */ - unsigned long total_size; - total_size = pwc_mbufs * pdev->len_per_image; - if (size != pdev->len_per_image && size != total_size) { - PWC_ERROR("Wrong size (%lu) needed to be len_per_image=%d or total_size=%lu\n", - size, pdev->len_per_image, total_size); - return -EINVAL; - } - } else if (size > pdev->len_per_image) - return -EINVAL; - - vma->vm_flags |= VM_IO; /* from 2.6.9-acX */ - - pos += (unsigned long)pdev->image_data; - while (size > 0) { - page = vmalloc_to_pfn((void *)pos); - if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) - return -EAGAIN; - start += PAGE_SIZE; - pos += PAGE_SIZE; - if (size > PAGE_SIZE) - size -= PAGE_SIZE; - else - size = 0; - } return 0; } +static void pwc_lock(struct vb2_queue *vq) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + mutex_lock(&pdev->modlock); +} + +static void pwc_unlock(struct vb2_queue *vq) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + mutex_unlock(&pdev->modlock); +} + +static struct vb2_ops pwc_vb_queue_ops = { + .queue_setup = queue_setup, + .buf_init = buffer_init, + .buf_prepare = buffer_prepare, + .buf_finish = buffer_finish, + .buf_cleanup = buffer_cleanup, + .buf_queue = buffer_queue, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, + .wait_prepare = pwc_unlock, + .wait_finish = pwc_lock, +}; + /***************************************************************************/ /* USB functions */ @@ -1648,12 +1281,22 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id } mutex_init(&pdev->modlock); - spin_lock_init(&pdev->ptrlock); + spin_lock_init(&pdev->queued_bufs_lock); + INIT_LIST_HEAD(&pdev->queued_bufs); pdev->udev = udev; - init_waitqueue_head(&pdev->frameq); pdev->vcompression = pwc_preferred_compression; + /* Init videobuf2 queue structure */ + memset(&pdev->vb_queue, 0, sizeof(pdev->vb_queue)); + pdev->vb_queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + pdev->vb_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; + pdev->vb_queue.drv_priv = pdev; + pdev->vb_queue.buf_struct_size = sizeof(struct pwc_frame_buf); + pdev->vb_queue.ops = &pwc_vb_queue_ops; + pdev->vb_queue.mem_ops = &vb2_vmalloc_memops; + vb2_queue_init(&pdev->vb_queue); + /* Init video_device structure */ memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template)); pdev->vdev.parent = &intf->dev; @@ -1752,11 +1395,9 @@ static void usb_pwc_disconnect(struct usb_interface *intf) pdev->error_status = EPIPE; pdev->unplugged = 1; - /* Alert waiting processes */ - wake_up_interruptible(&pdev->frameq); - /* No need to keep the urbs around after disconnection */ pwc_isoc_cleanup(pdev); + pwc_cleanup_queued_bufs(pdev); mutex_unlock(&pdev->modlock); @@ -1776,8 +1417,6 @@ static void usb_pwc_disconnect(struct usb_interface *intf) static char *size; static int fps; -static int fbufs; -static int mbufs; static int compression = -1; static int leds[2] = { -1, -1 }; static unsigned int leds_nargs; @@ -1786,8 +1425,6 @@ static unsigned int dev_hint_nargs; module_param(size, charp, 0444); module_param(fps, int, 0444); -module_param(fbufs, int, 0444); -module_param(mbufs, int, 0444); #ifdef CONFIG_USB_PWC_DEBUG module_param_named(trace, pwc_trace, int, 0644); #endif @@ -1798,8 +1435,6 @@ module_param_array(dev_hint, charp, &dev_hint_nargs, 0444); MODULE_PARM_DESC(size, "Initial image size. One of sqcif, qsif, qcif, sif, cif, vga"); MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful range 5-30"); -MODULE_PARM_DESC(fbufs, "Number of internal frame buffers to reserve"); -MODULE_PARM_DESC(mbufs, "Number of external (mmap()ed) image buffers"); #ifdef CONFIG_USB_PWC_DEBUG MODULE_PARM_DESC(trace, "For debugging purposes"); #endif @@ -1847,22 +1482,6 @@ static int __init usb_pwc_init(void) } PWC_DEBUG_MODULE("Default image size set to %s [%dx%d].\n", sizenames[default_size], pwc_image_sizes[default_size].x, pwc_image_sizes[default_size].y); } - if (mbufs) { - if (mbufs < 1 || mbufs > MAX_IMAGES) { - PWC_ERROR("Illegal number of mmap() buffers; use a number between 1 and %d.\n", MAX_IMAGES); - return -EINVAL; - } - pwc_mbufs = mbufs; - PWC_DEBUG_MODULE("Number of image buffers set to %d.\n", pwc_mbufs); - } - if (fbufs) { - if (fbufs < 2 || fbufs > MAX_FRAMES) { - PWC_ERROR("Illegal number of frame buffers; use a number between 2 and %d.\n", MAX_FRAMES); - return -EINVAL; - } - default_fbufs = fbufs; - PWC_DEBUG_MODULE("Number of frame buffers set to %d.\n", default_fbufs); - } #ifdef CONFIG_USB_PWC_DEBUG if (pwc_trace >= 0) { PWC_DEBUG_MODULE("Trace options: 0x%04x\n", pwc_trace); diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/video/pwc/pwc-misc.c index 6af5bb538358..0b031336eab8 100644 --- a/drivers/media/video/pwc/pwc-misc.c +++ b/drivers/media/video/pwc/pwc-misc.c @@ -126,8 +126,4 @@ void pwc_construct(struct pwc_device *pdev) pdev->pixfmt = V4L2_PIX_FMT_YUV420; /* default */ pdev->view_min.size = pdev->view_min.x * pdev->view_min.y; pdev->view_max.size = pdev->view_max.x * pdev->view_max.y; - /* length of image, in YUV format; always allocate enough memory. */ - pdev->len_per_image = PAGE_ALIGN((pdev->abs_max.x * pdev->abs_max.y * 3) / 2); } - - diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/video/pwc/pwc-uncompress.c index 4118184951ee..d110e38c4de0 100644 --- a/drivers/media/video/pwc/pwc-uncompress.c +++ b/drivers/media/video/pwc/pwc-uncompress.c @@ -34,17 +34,14 @@ #include "pwc-dec1.h" #include "pwc-dec23.h" -int pwc_decompress(struct pwc_device *pdev) +int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf) { - struct pwc_frame_buf *fbuf; int n, line, col, stride; void *yuv, *image; u16 *src; u16 *dsty, *dstu, *dstv; - fbuf = pdev->read_frame; - image = pdev->image_data; - image += pdev->images[pdev->fill_image].offset; + image = vb2_plane_vaddr(&fbuf->vb, 0); yuv = fbuf->data + pdev->frame_header_size; /* Skip header */ @@ -59,9 +56,13 @@ int pwc_decompress(struct pwc_device *pdev) * determine this using the type of the webcam */ memcpy(raw_frame->cmd, pdev->cmd_buf, 4); memcpy(raw_frame+1, yuv, pdev->frame_size); + vb2_set_plane_payload(&fbuf->vb, 0, + pdev->frame_size + sizeof(struct pwc_raw_frame)); return 0; } + vb2_set_plane_payload(&fbuf->vb, 0, pdev->view.size); + if (pdev->vbandlength == 0) { /* Uncompressed mode. * We copy the data into the output buffer, using the viewport diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index 8e72e0f56550..cda38837adcd 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -309,7 +309,7 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f) pixelformat != V4L2_PIX_FMT_PWC2) return -EINVAL; - if (pdev->iso_init) + if (vb2_is_streaming(&pdev->vb_queue)) return -EBUSY; PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d " @@ -673,150 +673,47 @@ static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) return pwc_vidioc_set_fmt(pdev, f); } -static int pwc_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *rb) +static int pwc_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *rb) { - int nbuffers; - - PWC_DEBUG_IOCTL("ioctl(VIDIOC_REQBUFS) count=%d\n", rb->count); - if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (rb->memory != V4L2_MEMORY_MMAP) - return -EINVAL; + struct pwc_device *pdev = video_drvdata(file); - nbuffers = rb->count; - if (nbuffers < 2) - nbuffers = 2; - else if (nbuffers > pwc_mbufs) - nbuffers = pwc_mbufs; - /* Force to use our # of buffers */ - rb->count = pwc_mbufs; - return 0; + return vb2_reqbufs(&pdev->vb_queue, rb); } static int pwc_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf) { struct pwc_device *pdev = video_drvdata(file); - int index; - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) index=%d\n", buf->index); - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad type\n"); - return -EINVAL; - } - index = buf->index; - if (index < 0 || index >= pwc_mbufs) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad index %d\n", buf->index); - return -EINVAL; - } - - buf->m.offset = index * pdev->len_per_image; - if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) - buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame); - else - buf->bytesused = pdev->view.size; - buf->field = V4L2_FIELD_NONE; - buf->memory = V4L2_MEMORY_MMAP; - /*buf->flags = V4L2_BUF_FLAG_MAPPED;*/ - buf->length = pdev->len_per_image; - - PWC_DEBUG_READ("VIDIOC_QUERYBUF: index=%d\n", buf->index); - PWC_DEBUG_READ("VIDIOC_QUERYBUF: m.offset=%d\n", buf->m.offset); - PWC_DEBUG_READ("VIDIOC_QUERYBUF: bytesused=%d\n", buf->bytesused); - - return 0; + return vb2_querybuf(&pdev->vb_queue, buf); } static int pwc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QBUF) index=%d\n", buf->index); - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - if (buf->index >= pwc_mbufs) - return -EINVAL; - - buf->flags |= V4L2_BUF_FLAG_QUEUED; - buf->flags &= ~V4L2_BUF_FLAG_DONE; + struct pwc_device *pdev = video_drvdata(file); - return 0; + return vb2_qbuf(&pdev->vb_queue, buf); } static int pwc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) { - DECLARE_WAITQUEUE(wait, current); struct pwc_device *pdev = video_drvdata(file); - int ret; - - PWC_DEBUG_IOCTL("ioctl(VIDIOC_DQBUF)\n"); - - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - add_wait_queue(&pdev->frameq, &wait); - while (pdev->full_frames == NULL) { - if (pdev->error_status) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - return -pdev->error_status; - } - - if (signal_pending(current)) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - return -ERESTARTSYS; - } - mutex_unlock(&pdev->modlock); - schedule(); - set_current_state(TASK_INTERRUPTIBLE); - mutex_lock(&pdev->modlock); - } - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: frame ready.\n"); - /* Decompress data in pdev->images[pdev->fill_image] */ - ret = pwc_handle_frame(pdev); - if (ret) - return ret; - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: after pwc_handle_frame\n"); - - buf->index = pdev->fill_image; - if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) - buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame); - else - buf->bytesused = pdev->view.size; - buf->flags = V4L2_BUF_FLAG_MAPPED; - buf->field = V4L2_FIELD_NONE; - do_gettimeofday(&buf->timestamp); - buf->sequence = 0; - buf->memory = V4L2_MEMORY_MMAP; - buf->m.offset = pdev->fill_image * pdev->len_per_image; - buf->length = pdev->len_per_image; - pwc_next_image(pdev); - - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->index=%d\n", buf->index); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->length=%d\n", buf->length); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: m.offset=%d\n", buf->m.offset); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: bytesused=%d\n", buf->bytesused); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: leaving\n"); - return 0; + return vb2_dqbuf(&pdev->vb_queue, buf, file->f_flags & O_NONBLOCK); } static int pwc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) { struct pwc_device *pdev = video_drvdata(file); - return pwc_isoc_init(pdev); + return vb2_streamon(&pdev->vb_queue, i); } static int pwc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) { struct pwc_device *pdev = video_drvdata(file); - pwc_isoc_cleanup(pdev); - return 0; + return vb2_streamoff(&pdev->vb_queue, i); } static int pwc_enum_framesizes(struct file *file, void *fh, diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index 421e75b69f29..ae92fe211f6d 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -36,6 +36,7 @@ #include <linux/videodev2.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> +#include <media/videobuf2-vmalloc.h> #ifdef CONFIG_USB_PWC_INPUT_EVDEV #include <linux/input.h> #endif @@ -112,18 +113,17 @@ #define FRAME_LOWMARK 5 /* Size and number of buffers for the ISO pipe. */ -#define MAX_ISO_BUFS 2 +#define MAX_ISO_BUFS 3 #define ISO_FRAMES_PER_DESC 10 #define ISO_MAX_FRAME_SIZE 960 #define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE) -/* Frame buffers: contains compressed or uncompressed video data. */ -#define MAX_FRAMES 5 /* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */ #define PWC_FRAME_SIZE (460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE) -/* Absolute maximum number of buffers available for mmap() */ -#define MAX_IMAGES 10 +/* Absolute minimum and maximum number of buffers available for mmap() */ +#define MIN_FRAMES 2 +#define MAX_FRAMES 16 /* Some macros to quickly find the type of a webcam */ #define DEVICE_USE_CODEC1(x) ((x)<675) @@ -143,16 +143,10 @@ struct pwc_iso_buf /* intermediate buffers with raw data from the USB cam */ struct pwc_frame_buf { - void *data; - volatile int filled; /* number of bytes filled */ - struct pwc_frame_buf *next; /* list */ -}; - -/* additionnal informations used when dealing image between kernel and userland */ -struct pwc_imgbuf -{ - unsigned long offset; /* offset of this buffer in the big array of image_data */ - int vma_use_count; /* count the number of time this memory is mapped */ + struct vb2_buffer vb; /* common v4l buffer stuff -- must be first */ + struct list_head list; + void *data; + int filled; /* number of bytes filled */ }; struct pwc_device @@ -177,8 +171,6 @@ struct pwc_device int vframes, vsize; /* frames-per-second & size (see PSZ_*) */ int pixfmt; /* pixelformat: V4L2_PIX_FMT_YUV420 or raw: _PWC1, _PWC2 */ int vframe_count; /* received frames */ - int vframes_dumped; /* counter for dumped frames */ - int vframes_error; /* frames received in error */ int vmax_packet_size; /* USB maxpacket size */ int vlast_packet_size; /* for frame synchronisation */ int visoc_errors; /* number of contiguous ISOC errors */ @@ -192,35 +184,29 @@ struct pwc_device int cmd_len; unsigned char cmd_buf[13]; - /* The image acquisition requires 3 to 4 steps: - 1. data is gathered in short packets from the USB controller - 2. data is synchronized and packed into a frame buffer - 3a. in case data is compressed, decompress it directly into image buffer - 3b. in case data is uncompressed, copy into image buffer with viewport - 4. data is transferred to the user process - - Note that MAX_ISO_BUFS != MAX_FRAMES != MAX_IMAGES.... - We have in effect a back-to-back-double-buffer system. - */ - /* 1: isoc */ struct pwc_iso_buf sbuf[MAX_ISO_BUFS]; char iso_init; - /* 2: frame */ - struct pwc_frame_buf *fbuf; /* all frames */ - struct pwc_frame_buf *empty_frames, *empty_frames_tail; /* all empty frames */ - struct pwc_frame_buf *full_frames, *full_frames_tail; /* all filled frames */ - struct pwc_frame_buf *fill_frame; /* frame currently being filled */ - struct pwc_frame_buf *read_frame; /* frame currently read by user process */ + /* videobuf2 queue and queued buffers list */ + struct vb2_queue vb_queue; + struct list_head queued_bufs; + spinlock_t queued_bufs_lock; + + /* + * Frame currently being filled, this only gets touched by the + * isoc urb complete handler, and by stream start / stop since + * start / stop touch it before / after starting / killing the urbs + * no locking is needed around this + */ + struct pwc_frame_buf *fill_buf; + int frame_header_size, frame_trailer_size; int frame_size; int frame_total_size; /* including header & trailer */ int drop_frames; - /* 3: decompression */ void *decompress_data; /* private data for decompression engine */ - /* 4: image */ /* We have an 'image' and a 'view', where 'image' is the fixed-size image as delivered by the camera, and 'view' is the size requested by the program. The camera image is centered in this viewport, laced with @@ -232,15 +218,7 @@ struct pwc_device struct pwc_coord image, view; /* image and viewport size */ struct pwc_coord offset; /* offset within the viewport */ - void *image_data; /* total buffer, which is subdivided into ... */ - struct pwc_imgbuf images[MAX_IMAGES];/* ...several images... */ - int fill_image; /* ...which are rotated. */ - int len_per_image; /* length per image */ - int image_read_pos; /* In case we read data in pieces, keep track of were we are in the imagebuffer */ - int image_used[MAX_IMAGES]; /* For MCAPTURE and SYNC */ - struct mutex modlock; /* to prevent races in video_open(), etc */ - spinlock_t ptrlock; /* for manipulating the buffer pointers */ /*** motorized pan/tilt feature */ struct pwc_mpt_range angle_range; @@ -253,7 +231,6 @@ struct pwc_device #endif /*** Misc. data ***/ - wait_queue_head_t frameq; /* When waiting for a frame to finish... */ #if PWC_INT_PIPE void *usb_int_handler; /* for the interrupt endpoint */ #endif @@ -263,13 +240,6 @@ struct pwc_device #ifdef CONFIG_USB_PWC_DEBUG extern int pwc_trace; #endif -extern int pwc_mbufs; - -/** functions in pwc-if.c */ -int pwc_handle_frame(struct pwc_device *pdev); -void pwc_next_image(struct pwc_device *pdev); -int pwc_isoc_init(struct pwc_device *pdev); -void pwc_isoc_cleanup(struct pwc_device *pdev); /** Functions in pwc-misc.c */ /* sizes in pixels */ @@ -334,6 +304,6 @@ extern const struct v4l2_ioctl_ops pwc_ioctl_ops; /** pwc-uncompress.c */ /* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */ -extern int pwc_decompress(struct pwc_device *pdev); +int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf); #endif |