diff options
Diffstat (limited to 'drivers/media/platform/davinci/vpif_display.c')
-rw-r--r-- | drivers/media/platform/davinci/vpif_display.c | 275 |
1 files changed, 183 insertions, 92 deletions
diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c index a5b88689abad..b716fbd4241f 100644 --- a/drivers/media/platform/davinci/vpif_display.c +++ b/drivers/media/platform/davinci/vpif_display.c @@ -280,12 +280,13 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) } /* clock settings */ - ret = - vpif_config_data->set_clock(ch->vpifparams.std_info.ycmux_mode, - ch->vpifparams.std_info.hd_sd); - if (ret < 0) { - vpif_err("can't set clock\n"); - return ret; + if (vpif_config_data->set_clock) { + ret = vpif_config_data->set_clock(ch->vpifparams.std_info. + ycmux_mode, ch->vpifparams.std_info.hd_sd); + if (ret < 0) { + vpif_err("can't set clock\n"); + return ret; + } } /* set the parameters and addresses */ @@ -307,7 +308,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) channel2_intr_assert(); channel2_intr_enable(1); enable_channel2(1); - if (vpif_config_data->ch2_clip_en) + if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en) channel2_clipping_enable(1); } @@ -316,7 +317,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) channel3_intr_assert(); channel3_intr_enable(1); enable_channel3(1); - if (vpif_config_data->ch3_clip_en) + if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en) channel3_clipping_enable(1); } @@ -826,9 +827,11 @@ static int vpif_querycap(struct file *file, void *priv, { struct vpif_display_config *config = vpif_dev->platform_data; - cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; - strlcpy(cap->driver, "vpif display", sizeof(cap->driver)); - strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info)); + cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + snprintf(cap->driver, sizeof(cap->driver), "%s", dev_name(vpif_dev)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + dev_name(vpif_dev)); strlcpy(cap->card, config->card_name, sizeof(cap->card)); return 0; @@ -935,6 +938,7 @@ static int vpif_reqbufs(struct file *file, void *priv, enum v4l2_field field; struct vb2_queue *q; u8 index = 0; + int ret; /* This file handle has not initialized the channel, It is not allowed to do settings */ @@ -980,8 +984,12 @@ static int vpif_reqbufs(struct file *file, void *priv, q->mem_ops = &vb2_dma_contig_memops; q->buf_struct_size = sizeof(struct vpif_disp_buffer); - vb2_queue_init(q); - + ret = vb2_queue_init(q); + if (ret) { + vpif_err("vpif_display: vb2_queue_init() failed\n"); + vb2_dma_contig_cleanup_ctx(common->alloc_ctx); + return ret; + } /* Set io allowed member of file handle to TRUE */ fh->io_allowed[index] = 1; /* Increment io usrs member of channel object to 1 */ @@ -1173,14 +1181,16 @@ static int vpif_streamoff(struct file *file, void *priv, if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { /* disable channel */ if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { - if (vpif_config_data->ch2_clip_en) + if (vpif_config_data-> + chan_config[VPIF_CHANNEL2_VIDEO].clip_en) channel2_clipping_enable(0); enable_channel2(0); channel2_intr_enable(0); } if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || (2 == common->started)) { - if (vpif_config_data->ch3_clip_en) + if (vpif_config_data-> + chan_config[VPIF_CHANNEL3_VIDEO].clip_en) channel3_clipping_enable(0); enable_channel3(0); channel3_intr_enable(0); @@ -1213,49 +1223,126 @@ static int vpif_enum_output(struct file *file, void *fh, { struct vpif_display_config *config = vpif_dev->platform_data; + struct vpif_display_chan_config *chan_cfg; + struct vpif_fh *vpif_handler = fh; + struct channel_obj *ch = vpif_handler->channel; - if (output->index >= config->output_count) { + chan_cfg = &config->chan_config[ch->channel_id]; + if (output->index >= chan_cfg->output_count) { vpif_dbg(1, debug, "Invalid output index\n"); return -EINVAL; } - strcpy(output->name, config->output[output->index]); - output->type = V4L2_OUTPUT_TYPE_ANALOG; - output->std = VPIF_V4L2_STD; + *output = chan_cfg->outputs[output->index].output; + return 0; +} + +/** + * vpif_output_to_subdev() - Maps output to sub device + * @vpif_cfg - global config ptr + * @chan_cfg - channel config ptr + * @index - Given output index from application + * + * lookup the sub device information for a given output index. + * we report all the output to application. output table also + * has sub device name for the each output + */ +static int +vpif_output_to_subdev(struct vpif_display_config *vpif_cfg, + struct vpif_display_chan_config *chan_cfg, int index) +{ + struct vpif_subdev_info *subdev_info; + const char *subdev_name; + int i; + + vpif_dbg(2, debug, "vpif_output_to_subdev\n"); + + if (chan_cfg->outputs == NULL) + return -1; + + subdev_name = chan_cfg->outputs[index].subdev_name; + if (subdev_name == NULL) + return -1; + + /* loop through the sub device list to get the sub device info */ + for (i = 0; i < vpif_cfg->subdev_count; i++) { + subdev_info = &vpif_cfg->subdevinfo[i]; + if (!strcmp(subdev_info->name, subdev_name)) + return i; + } + return -1; +} + +/** + * vpif_set_output() - Select an output + * @vpif_cfg - global config ptr + * @ch - channel + * @index - Given output index from application + * + * Select the given output. + */ +static int vpif_set_output(struct vpif_display_config *vpif_cfg, + struct channel_obj *ch, int index) +{ + struct vpif_display_chan_config *chan_cfg = + &vpif_cfg->chan_config[ch->channel_id]; + struct vpif_subdev_info *subdev_info = NULL; + struct v4l2_subdev *sd = NULL; + u32 input = 0, output = 0; + int sd_index; + int ret; + + sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index); + if (sd_index >= 0) { + sd = vpif_obj.sd[sd_index]; + subdev_info = &vpif_cfg->subdevinfo[sd_index]; + } + + if (sd) { + input = chan_cfg->outputs[index].input_route; + output = chan_cfg->outputs[index].output_route; + ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0); + if (ret < 0 && ret != -ENOIOCTLCMD) { + vpif_err("Failed to set output\n"); + return ret; + } + } + ch->output_idx = index; + ch->sd = sd; + if (chan_cfg->outputs != NULL) + /* update tvnorms from the sub device output info */ + ch->video_dev->tvnorms = chan_cfg->outputs[index].output.std; return 0; } static int vpif_s_output(struct file *file, void *priv, unsigned int i) { + struct vpif_display_config *config = vpif_dev->platform_data; + struct vpif_display_chan_config *chan_cfg; struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; - struct video_obj *vid_ch = &ch->video; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; - int ret = 0; + + chan_cfg = &config->chan_config[ch->channel_id]; + + if (i >= chan_cfg->output_count) + return -EINVAL; if (common->started) { vpif_err("Streaming in progress\n"); return -EBUSY; } - ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, - s_routing, 0, i, 0); - - if (ret < 0) - vpif_err("Failed to set output standard\n"); - - vid_ch->output_id = i; - return ret; + return vpif_set_output(config, ch, i); } static int vpif_g_output(struct file *file, void *priv, unsigned int *i) { struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; - struct video_obj *vid_ch = &ch->video; - *i = vid_ch->output_id; + *i = ch->output_idx; return 0; } @@ -1290,10 +1377,12 @@ vpif_enum_dv_timings(struct file *file, void *priv, { struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; - struct video_obj *vid_ch = &ch->video; + int ret; - return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], - video, enum_dv_timings, timings); + ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings); + if (ret == -ENOIOCTLCMD && ret == -ENODEV) + return -EINVAL; + return ret; } /** @@ -1319,13 +1408,9 @@ static int vpif_s_dv_timings(struct file *file, void *priv, } /* Configure subdevice timings, if any */ - ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], - video, s_dv_timings, timings); - if (ret == -ENOIOCTLCMD) { - vpif_dbg(2, debug, "Custom DV timings not supported by " - "subdevice\n"); - return -EINVAL; - } + ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD || ret == -ENODEV) + ret = 0; if (ret < 0) { vpif_dbg(2, debug, "Error setting custom DV timings\n"); return ret; @@ -1450,10 +1535,8 @@ static int vpif_dbg_g_register(struct file *file, void *priv, struct v4l2_dbg_register *reg){ struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; - struct video_obj *vid_ch = &ch->video; - return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core, - g_register, reg); + return v4l2_subdev_call(ch->sd, core, g_register, reg); } /* @@ -1469,10 +1552,8 @@ static int vpif_dbg_s_register(struct file *file, void *priv, struct v4l2_dbg_register *reg){ struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; - struct video_obj *vid_ch = &ch->video; - return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core, - s_register, reg); + return v4l2_subdev_call(ch->sd, core, s_register, reg); } #endif @@ -1536,9 +1617,6 @@ static struct video_device vpif_video_template = { .name = "vpif", .fops = &vpif_fops, .ioctl_ops = &vpif_ioctl_ops, - .tvnorms = VPIF_V4L2_STD, - .current_norm = V4L2_STD_625_50, - }; /*Configure the channels, buffer sizei, request irq */ @@ -1611,7 +1689,8 @@ static __init int vpif_probe(struct platform_device *pdev) { struct vpif_subdev_info *subdevdata; struct vpif_display_config *config; - int i, j = 0, k, q, m, err = 0; + int i, j = 0, k, err = 0; + int res_idx = 0; struct i2c_adapter *i2c_adap; struct common_obj *common; struct channel_obj *ch; @@ -1634,21 +1713,22 @@ static __init int vpif_probe(struct platform_device *pdev) return err; } - k = 0; - while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) { + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, res_idx))) { for (i = res->start; i <= res->end; i++) { if (request_irq(i, vpif_channel_isr, IRQF_SHARED, - "VPIF_Display", - (void *)(&vpif_obj.dev[k]->channel_id))) { + "VPIF_Display", (void *) + (&vpif_obj.dev[res_idx]->channel_id))) { err = -EBUSY; + for (j = 0; j < i; j++) + free_irq(j, (void *) + (&vpif_obj.dev[res_idx]->channel_id)); goto vpif_int_err; } } - k++; + res_idx++; } for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { - /* Get the pointer to the channel object */ ch = vpif_obj.dev[i]; @@ -1694,6 +1774,32 @@ static __init int vpif_probe(struct platform_device *pdev) } } + i2c_adap = i2c_get_adapter(1); + config = pdev->dev.platform_data; + subdev_count = config->subdev_count; + subdevdata = config->subdevinfo; + vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count, + GFP_KERNEL); + if (vpif_obj.sd == NULL) { + vpif_err("unable to allocate memory for subdevice pointers\n"); + err = -ENOMEM; + goto vpif_sd_error; + } + + for (i = 0; i < subdev_count; i++) { + vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, + i2c_adap, + &subdevdata[i].board_info, + NULL); + if (!vpif_obj.sd[i]) { + vpif_err("Error registering v4l2 subdevice\n"); + goto probe_subdev_out; + } + + if (vpif_obj.sd[i]) + vpif_obj.sd[i]->grp_id = 1 << i; + } + for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) { ch = vpif_obj.dev[j]; /* Initialize field of the channel objects */ @@ -1715,6 +1821,8 @@ static __init int vpif_probe(struct platform_device *pdev) } ch->initialized = 0; + if (subdev_count) + ch->sd = vpif_obj.sd[0]; ch->channel_id = j; if (j < 2) ch->common[VPIF_VIDEO_INDEX].numbuffers = @@ -1729,6 +1837,12 @@ static __init int vpif_probe(struct platform_device *pdev) ch->common[VPIF_VIDEO_INDEX].fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; ch->video_dev->lock = &common->lock; + video_set_drvdata(ch->video_dev, ch); + + /* select output 0 */ + err = vpif_set_output(config, ch, 0); + if (err) + goto probe_out; /* register video device */ vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n", @@ -1738,42 +1852,12 @@ static __init int vpif_probe(struct platform_device *pdev) VFL_TYPE_GRABBER, (j ? 3 : 2)); if (err < 0) goto probe_out; - - video_set_drvdata(ch->video_dev, ch); - } - - i2c_adap = i2c_get_adapter(1); - config = pdev->dev.platform_data; - subdev_count = config->subdev_count; - subdevdata = config->subdevinfo; - vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count, - GFP_KERNEL); - if (vpif_obj.sd == NULL) { - vpif_err("unable to allocate memory for subdevice pointers\n"); - err = -ENOMEM; - goto probe_out; - } - - for (i = 0; i < subdev_count; i++) { - vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, - i2c_adap, - &subdevdata[i].board_info, - NULL); - if (!vpif_obj.sd[i]) { - vpif_err("Error registering v4l2 subdevice\n"); - goto probe_subdev_out; - } - - if (vpif_obj.sd[i]) - vpif_obj.sd[i]->grp_id = 1 << i; } v4l2_info(&vpif_obj.v4l2_dev, " VPIF display driver initialized\n"); return 0; -probe_subdev_out: - kfree(vpif_obj.sd); probe_out: for (k = 0; k < j; k++) { ch = vpif_obj.dev[k]; @@ -1781,14 +1865,21 @@ probe_out: video_device_release(ch->video_dev); ch->video_dev = NULL; } +probe_subdev_out: + kfree(vpif_obj.sd); +vpif_sd_error: + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + ch = vpif_obj.dev[i]; + /* Note: does nothing if ch->video_dev == NULL */ + video_device_release(ch->video_dev); + } vpif_int_err: v4l2_device_unregister(&vpif_obj.v4l2_dev); vpif_err("VPIF IRQ request failed\n"); - for (q = k; k >= 0; k--) { - for (m = i; m >= res->start; m--) - free_irq(m, (void *)(&vpif_obj.dev[k]->channel_id)); - res = platform_get_resource(pdev, IORESOURCE_IRQ, k-1); - m = res->end; + for (i = 0; i < res_idx; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + for (j = res->start; j <= res->end; j++) + free_irq(j, (void *)(&vpif_obj.dev[i]->channel_id)); } return err; |