summaryrefslogtreecommitdiff
path: root/drivers/md
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/md')
-rw-r--r--drivers/md/Kconfig2
-rw-r--r--drivers/md/Makefile4
-rw-r--r--drivers/md/md.c2
-rw-r--r--drivers/md/raid5.c2727
-rw-r--r--drivers/md/xor.c154
5 files changed, 1685 insertions, 1204 deletions
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 466909f38d98..64bf3a81db93 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -109,6 +109,8 @@ config MD_RAID10
config MD_RAID456
tristate "RAID-4/RAID-5/RAID-6 mode"
depends on BLK_DEV_MD
+ select ASYNC_MEMCPY
+ select ASYNC_XOR
---help---
A RAID-5 set of N drives with a capacity of C MB per drive provides
the capacity of C * (N - 1) MB, and protects against a failure
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 2c45d7683ae9..c49366cdc05d 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -18,7 +18,7 @@ raid456-objs := raid5.o raid6algos.o raid6recov.o raid6tables.o \
hostprogs-y := mktables
# Note: link order is important. All raid personalities
-# and xor.o must come before md.o, as they each initialise
+# and must come before md.o, as they each initialise
# themselves, and md.o may use the personalities when it
# auto-initialised.
@@ -26,7 +26,7 @@ obj-$(CONFIG_MD_LINEAR) += linear.o
obj-$(CONFIG_MD_RAID0) += raid0.o
obj-$(CONFIG_MD_RAID1) += raid1.o
obj-$(CONFIG_MD_RAID10) += raid10.o
-obj-$(CONFIG_MD_RAID456) += raid456.o xor.o
+obj-$(CONFIG_MD_RAID456) += raid456.o
obj-$(CONFIG_MD_MULTIPATH) += multipath.o
obj-$(CONFIG_MD_FAULTY) += faulty.o
obj-$(CONFIG_BLK_DEV_MD) += md-mod.o
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1c54f3c1cca7..33beaa7da085 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5814,7 +5814,7 @@ static __exit void md_exit(void)
}
}
-module_init(md_init)
+subsys_initcall(md_init);
module_exit(md_exit)
static int get_ro(char *buffer, struct kernel_param *kp)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 061375ee6592..0b66afef2d82 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -52,6 +52,7 @@
#include "raid6.h"
#include <linux/raid/bitmap.h>
+#include <linux/async_tx.h>
/*
* Stripe cache
@@ -80,7 +81,6 @@
/*
* The following can be used to debug the driver
*/
-#define RAID5_DEBUG 0
#define RAID5_PARANOIA 1
#if RAID5_PARANOIA && defined(CONFIG_SMP)
# define CHECK_DEVLOCK() assert_spin_locked(&conf->device_lock)
@@ -88,8 +88,7 @@
# define CHECK_DEVLOCK()
#endif
-#define PRINTK(x...) ((void)(RAID5_DEBUG && printk(x)))
-#if RAID5_DEBUG
+#ifdef DEBUG
#define inline
#define __inline__
#endif
@@ -104,6 +103,23 @@ static inline int raid6_next_disk(int disk, int raid_disks)
disk++;
return (disk < raid_disks) ? disk : 0;
}
+
+static void return_io(struct bio *return_bi)
+{
+ struct bio *bi = return_bi;
+ while (bi) {
+ int bytes = bi->bi_size;
+
+ return_bi = bi->bi_next;
+ bi->bi_next = NULL;
+ bi->bi_size = 0;
+ bi->bi_end_io(bi, bytes,
+ test_bit(BIO_UPTODATE, &bi->bi_flags)
+ ? 0 : -EIO);
+ bi = return_bi;
+ }
+}
+
static void print_raid5_conf (raid5_conf_t *conf);
static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
@@ -125,6 +141,7 @@ static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
}
md_wakeup_thread(conf->mddev->thread);
} else {
+ BUG_ON(sh->ops.pending);
if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
atomic_dec(&conf->preread_active_stripes);
if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
@@ -152,7 +169,8 @@ static void release_stripe(struct stripe_head *sh)
static inline void remove_hash(struct stripe_head *sh)
{
- PRINTK("remove_hash(), stripe %llu\n", (unsigned long long)sh->sector);
+ pr_debug("remove_hash(), stripe %llu\n",
+ (unsigned long long)sh->sector);
hlist_del_init(&sh->hash);
}
@@ -161,7 +179,8 @@ static inline void insert_hash(raid5_conf_t *conf, struct stripe_head *sh)
{
struct hlist_head *hp = stripe_hash(conf, sh->sector);
- PRINTK("insert_hash(), stripe %llu\n", (unsigned long long)sh->sector);
+ pr_debug("insert_hash(), stripe %llu\n",
+ (unsigned long long)sh->sector);
CHECK_DEVLOCK();
hlist_add_head(&sh->hash, hp);
@@ -224,9 +243,10 @@ static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int
BUG_ON(atomic_read(&sh->count) != 0);
BUG_ON(test_bit(STRIPE_HANDLE, &sh->state));
-
+ BUG_ON(sh->ops.pending || sh->ops.ack || sh->ops.complete);
+
CHECK_DEVLOCK();
- PRINTK("init_stripe called, stripe %llu\n",
+ pr_debug("init_stripe called, stripe %llu\n",
(unsigned long long)sh->sector);
remove_hash(sh);
@@ -240,11 +260,11 @@ static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int
for (i = sh->disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
- if (dev->toread || dev->towrite || dev->written ||
+ if (dev->toread || dev->read || dev->towrite || dev->written ||
test_bit(R5_LOCKED, &dev->flags)) {
- printk("sector=%llx i=%d %p %p %p %d\n",
+ printk(KERN_ERR "sector=%llx i=%d %p %p %p %p %d\n",
(unsigned long long)sh->sector, i, dev->toread,
- dev->towrite, dev->written,
+ dev->read, dev->towrite, dev->written,
test_bit(R5_LOCKED, &dev->flags));
BUG();
}
@@ -260,11 +280,11 @@ static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector, in
struct hlist_node *hn;
CHECK_DEVLOCK();
- PRINTK("__find_stripe, sector %llu\n", (unsigned long long)sector);
+ pr_debug("__find_stripe, sector %llu\n", (unsigned long long)sector);
hlist_for_each_entry(sh, hn, stripe_hash(conf, sector), hash)
if (sh->sector == sector && sh->disks == disks)
return sh;
- PRINTK("__stripe %llu not in cache\n", (unsigned long long)sector);
+ pr_debug("__stripe %llu not in cache\n", (unsigned long long)sector);
return NULL;
}
@@ -276,7 +296,7 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector
{
struct stripe_head *sh;
- PRINTK("get_stripe, sector %llu\n", (unsigned long long)sector);
+ pr_debug("get_stripe, sector %llu\n", (unsigned long long)sector);
spin_lock_irq(&conf->device_lock);
@@ -324,6 +344,579 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector
return sh;
}
+/* test_and_ack_op() ensures that we only dequeue an operation once */
+#define test_and_ack_op(op, pend) \
+do { \
+ if (test_bit(op, &sh->ops.pending) && \
+ !test_bit(op, &sh->ops.complete)) { \
+ if (test_and_set_bit(op, &sh->ops.ack)) \
+ clear_bit(op, &pend); \
+ else \
+ ack++; \
+ } else \
+ clear_bit(op, &pend); \
+} while (0)
+
+/* find new work to run, do not resubmit work that is already
+ * in flight
+ */
+static unsigned long get_stripe_work(struct stripe_head *sh)
+{
+ unsigned long pending;
+ int ack = 0;
+
+ pending = sh->ops.pending;
+
+ test_and_ack_op(STRIPE_OP_BIOFILL, pending);
+ test_and_ack_op(STRIPE_OP_COMPUTE_BLK, pending);
+ test_and_ack_op(STRIPE_OP_PREXOR, pending);
+ test_and_ack_op(STRIPE_OP_BIODRAIN, pending);
+ test_and_ack_op(STRIPE_OP_POSTXOR, pending);
+ test_and_ack_op(STRIPE_OP_CHECK, pending);
+ if (test_and_clear_bit(STRIPE_OP_IO, &sh->ops.pending))
+ ack++;
+
+ sh->ops.count -= ack;
+ BUG_ON(sh->ops.count < 0);
+
+ return pending;
+}
+
+static int
+raid5_end_read_request(struct bio *bi, unsigned int bytes_done, int error);
+static int
+raid5_end_write_request (struct bio *bi, unsigned int bytes_done, int error);
+
+static void ops_run_io(struct stripe_head *sh)
+{
+ raid5_conf_t *conf = sh->raid_conf;
+ int i, disks = sh->disks;
+
+ might_sleep();
+
+ for (i = disks; i--; ) {
+ int rw;
+ struct bio *bi;
+ mdk_rdev_t *rdev;
+ if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
+ rw = WRITE;
+ else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
+ rw = READ;
+ else
+ continue;
+
+ bi = &sh->dev[i].req;
+
+ bi->bi_rw = rw;
+ if (rw == WRITE)
+ bi->bi_end_io = raid5_end_write_request;
+ else
+ bi->bi_end_io = raid5_end_read_request;
+
+ rcu_read_lock();
+ rdev = rcu_dereference(conf->disks[i].rdev);
+ if (rdev && test_bit(Faulty, &rdev->flags))
+ rdev = NULL;
+ if (rdev)
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+
+ if (rdev) {
+ if (test_bit(STRIPE_SYNCING, &sh->state) ||
+ test_bit(STRIPE_EXPAND_SOURCE, &sh->state) ||
+ test_bit(STRIPE_EXPAND_READY, &sh->state))
+ md_sync_acct(rdev->bdev, STRIPE_SECTORS);
+
+ bi->bi_bdev = rdev->bdev;
+ pr_debug("%s: for %llu schedule op %ld on disc %d\n",
+ __FUNCTION__, (unsigned long long)sh->sector,
+ bi->bi_rw, i);
+ atomic_inc(&sh->count);
+ bi->bi_sector = sh->sector + rdev->data_offset;
+ bi->bi_flags = 1 << BIO_UPTODATE;
+ bi->bi_vcnt = 1;
+ bi->bi_max_vecs = 1;
+ bi->bi_idx = 0;
+ bi->bi_io_vec = &sh->dev[i].vec;
+ bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
+ bi->bi_io_vec[0].bv_offset = 0;
+ bi->bi_size = STRIPE_SIZE;
+ bi->bi_next = NULL;
+ if (rw == WRITE &&
+ test_bit(R5_ReWrite, &sh->dev[i].flags))
+ atomic_add(STRIPE_SECTORS,
+ &rdev->corrected_errors);
+ generic_make_request(bi);
+ } else {
+ if (rw == WRITE)
+ set_bit(STRIPE_DEGRADED, &sh->state);
+ pr_debug("skip op %ld on disc %d for sector %llu\n",
+ bi->bi_rw, i, (unsigned long long)sh->sector);
+ clear_bit(R5_LOCKED, &sh->dev[i].flags);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ }
+ }
+}
+
+static struct dma_async_tx_descriptor *
+async_copy_data(int frombio, struct bio *bio, struct page *page,
+ sector_t sector, struct dma_async_tx_descriptor *tx)
+{
+ struct bio_vec *bvl;
+ struct page *bio_page;
+ int i;
+ int page_offset;
+
+ if (bio->bi_sector >= sector)
+ page_offset = (signed)(bio->bi_sector - sector) * 512;
+ else
+ page_offset = (signed)(sector - bio->bi_sector) * -512;
+ bio_for_each_segment(bvl, bio, i) {
+ int len = bio_iovec_idx(bio, i)->bv_len;
+ int clen;
+ int b_offset = 0;
+
+ if (page_offset < 0) {
+ b_offset = -page_offset;
+ page_offset += b_offset;
+ len -= b_offset;
+ }
+
+ if (len > 0 && page_offset + len > STRIPE_SIZE)
+ clen = STRIPE_SIZE - page_offset;
+ else
+ clen = len;
+
+ if (clen > 0) {
+ b_offset += bio_iovec_idx(bio, i)->bv_offset;
+ bio_page = bio_iovec_idx(bio, i)->bv_page;
+ if (frombio)
+ tx = async_memcpy(page, bio_page, page_offset,
+ b_offset, clen,
+ ASYNC_TX_DEP_ACK | ASYNC_TX_KMAP_SRC,
+ tx, NULL, NULL);
+ else
+ tx = async_memcpy(bio_page, page, b_offset,
+ page_offset, clen,
+ ASYNC_TX_DEP_ACK | ASYNC_TX_KMAP_DST,
+ tx, NULL, NULL);
+ }
+ if (clen < len) /* hit end of page */
+ break;
+ page_offset += len;
+ }
+
+ return tx;
+}
+
+static void ops_complete_biofill(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+ struct bio *return_bi = NULL;
+ raid5_conf_t *conf = sh->raid_conf;
+ int i, more_to_read = 0;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ /* clear completed biofills */
+ for (i = sh->disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ /* check if this stripe has new incoming reads */
+ if (dev->toread)
+ more_to_read++;
+
+ /* acknowledge completion of a biofill operation */
+ /* and check if we need to reply to a read request
+ */
+ if (test_bit(R5_Wantfill, &dev->flags) && !dev->toread) {
+ struct bio *rbi, *rbi2;
+ clear_bit(R5_Wantfill, &dev->flags);
+
+ /* The access to dev->read is outside of the
+ * spin_lock_irq(&conf->device_lock), but is protected
+ * by the STRIPE_OP_BIOFILL pending bit
+ */
+ BUG_ON(!dev->read);
+ rbi = dev->read;
+ dev->read = NULL;
+ while (rbi && rbi->bi_sector <
+ dev->sector + STRIPE_SECTORS) {
+ rbi2 = r5_next_bio(rbi, dev->sector);
+ spin_lock_irq(&conf->device_lock);
+ if (--rbi->bi_phys_segments == 0) {
+ rbi->bi_next = return_bi;
+ return_bi = rbi;
+ }
+ spin_unlock_irq(&conf->device_lock);
+ rbi = rbi2;
+ }
+ }
+ }
+ clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack);
+ clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending);
+
+ return_io(return_bi);
+
+ if (more_to_read)
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static void ops_run_biofill(struct stripe_head *sh)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ raid5_conf_t *conf = sh->raid_conf;
+ int i;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ for (i = sh->disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (test_bit(R5_Wantfill, &dev->flags)) {
+ struct bio *rbi;
+ spin_lock_irq(&conf->device_lock);
+ dev->read = rbi = dev->toread;
+ dev->toread = NULL;
+ spin_unlock_irq(&conf->device_lock);
+ while (rbi && rbi->bi_sector <
+ dev->sector + STRIPE_SECTORS) {
+ tx = async_copy_data(0, rbi, dev->page,
+ dev->sector, tx);
+ rbi = r5_next_bio(rbi, dev->sector);
+ }
+ }
+ }
+
+ atomic_inc(&sh->count);
+ async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
+ ops_complete_biofill, sh);
+}
+
+static void ops_complete_compute5(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+ int target = sh->ops.target;
+ struct r5dev *tgt = &sh->dev[target];
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ set_bit(R5_UPTODATE, &tgt->flags);
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
+ clear_bit(R5_Wantcompute, &tgt->flags);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_compute5(struct stripe_head *sh, unsigned long pending)
+{
+ /* kernel stack size limits the total number of disks */
+ int disks = sh->disks;
+ struct page *xor_srcs[disks];
+ int target = sh->ops.target;
+ struct r5dev *tgt = &sh->dev[target];
+ struct page *xor_dest = tgt->page;
+ int count = 0;
+ struct dma_async_tx_descriptor *tx;
+ int i;
+
+ pr_debug("%s: stripe %llu block: %d\n",
+ __FUNCTION__, (unsigned long long)sh->sector, target);
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
+
+ for (i = disks; i--; )
+ if (i != target)
+ xor_srcs[count++] = sh->dev[i].page;
+
+ atomic_inc(&sh->count);
+
+ if (unlikely(count == 1))
+ tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
+ 0, NULL, ops_complete_compute5, sh);
+ else
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ ASYNC_TX_XOR_ZERO_DST, NULL,
+ ops_complete_compute5, sh);
+
+ /* ack now if postxor is not set to be run */
+ if (tx && !test_bit(STRIPE_OP_POSTXOR, &pending))
+ async_tx_ack(tx);
+
+ return tx;
+}
+
+static void ops_complete_prexor(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ set_bit(STRIPE_OP_PREXOR, &sh->ops.complete);
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_prexor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+{
+ /* kernel stack size limits the total number of disks */
+ int disks = sh->disks;
+ struct page *xor_srcs[disks];
+ int count = 0, pd_idx = sh->pd_idx, i;
+
+ /* existing parity data subtracted */
+ struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ /* Only process blocks that are known to be uptodate */
+ if (dev->towrite && test_bit(R5_Wantprexor, &dev->flags))
+ xor_srcs[count++] = dev->page;
+ }
+
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ ASYNC_TX_DEP_ACK | ASYNC_TX_XOR_DROP_DST, tx,
+ ops_complete_prexor, sh);
+
+ return tx;
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+{
+ int disks = sh->disks;
+ int pd_idx = sh->pd_idx, i;
+
+ /* check if prexor is active which means only process blocks
+ * that are part of a read-modify-write (Wantprexor)
+ */
+ int prexor = test_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ struct bio *chosen;
+ int towrite;
+
+ towrite = 0;
+ if (prexor) { /* rmw */
+ if (dev->towrite &&
+ test_bit(R5_Wantprexor, &dev->flags))
+ towrite = 1;
+ } else { /* rcw */
+ if (i != pd_idx && dev->towrite &&
+ test_bit(R5_LOCKED, &dev->flags))
+ towrite = 1;
+ }
+
+ if (towrite) {
+ struct bio *wbi;
+
+ spin_lock(&sh->lock);
+ chosen = dev->towrite;
+ dev->towrite = NULL;
+ BUG_ON(dev->written);
+ wbi = dev->written = chosen;
+ spin_unlock(&sh->lock);
+
+ while (wbi && wbi->bi_sector <
+ dev->sector + STRIPE_SECTORS) {
+ tx = async_copy_data(1, wbi, dev->page,
+ dev->sector, tx);
+ wbi = r5_next_bio(wbi, dev->sector);
+ }
+ }
+ }
+
+ return tx;
+}
+
+static void ops_complete_postxor(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ set_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static void ops_complete_write(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+ int disks = sh->disks, i, pd_idx = sh->pd_idx;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (dev->written || i == pd_idx)
+ set_bit(R5_UPTODATE, &dev->flags);
+ }
+
+ set_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete);
+ set_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
+
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static void
+ops_run_postxor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+{
+ /* kernel stack size limits the total number of disks */
+ int disks = sh->disks;
+ struct page *xor_srcs[disks];
+
+ int count = 0, pd_idx = sh->pd_idx, i;
+ struct page *xor_dest;
+ int prexor = test_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
+ unsigned long flags;
+ dma_async_tx_callback callback;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ /* check if prexor is active which means only process blocks
+ * that are part of a read-modify-write (written)
+ */
+ if (prexor) {
+ xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (dev->written)
+ xor_srcs[count++] = dev->page;
+ }
+ } else {
+ xor_dest = sh->dev[pd_idx].page;
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (i != pd_idx)
+ xor_srcs[count++] = dev->page;
+ }
+ }
+
+ /* check whether this postxor is part of a write */
+ callback = test_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending) ?
+ ops_complete_write : ops_complete_postxor;
+
+ /* 1/ if we prexor'd then the dest is reused as a source
+ * 2/ if we did not prexor then we are redoing the parity
+ * set ASYNC_TX_XOR_DROP_DST and ASYNC_TX_XOR_ZERO_DST
+ * for the synchronous xor case
+ */
+ flags = ASYNC_TX_DEP_ACK | ASYNC_TX_ACK |
+ (prexor ? ASYNC_TX_XOR_DROP_DST : ASYNC_TX_XOR_ZERO_DST);
+
+ atomic_inc(&sh->count);
+
+ if (unlikely(count == 1)) {
+ flags &= ~(ASYNC_TX_XOR_DROP_DST | ASYNC_TX_XOR_ZERO_DST);
+ tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
+ flags, tx, callback, sh);
+ } else
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ flags, tx, callback, sh);
+}
+
+static void ops_complete_check(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+ int pd_idx = sh->pd_idx;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ if (test_and_clear_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending) &&
+ sh->ops.zero_sum_result == 0)
+ set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
+
+ set_bit(STRIPE_OP_CHECK, &sh->ops.complete);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static void ops_run_check(struct stripe_head *sh)
+{
+ /* kernel stack size limits the total number of disks */
+ int disks = sh->disks;
+ struct page *xor_srcs[disks];
+ struct dma_async_tx_descriptor *tx;
+
+ int count = 0, pd_idx = sh->pd_idx, i;
+ struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
+
+ pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ (unsigned long long)sh->sector);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (i != pd_idx)
+ xor_srcs[count++] = dev->page;
+ }
+
+ tx = async_xor_zero_sum(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ &sh->ops.zero_sum_result, 0, NULL, NULL, NULL);
+
+ if (tx)
+ set_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending);
+ else
+ clear_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending);
+
+ atomic_inc(&sh->count);
+ tx = async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
+ ops_complete_check, sh);
+}
+
+static void raid5_run_ops(struct stripe_head *sh, unsigned long pending)
+{
+ int overlap_clear = 0, i, disks = sh->disks;
+ struct dma_async_tx_descriptor *tx = NULL;
+
+ if (test_bit(STRIPE_OP_BIOFILL, &pending)) {
+ ops_run_biofill(sh);
+ overlap_clear++;
+ }
+
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &pending))
+ tx = ops_run_compute5(sh, pending);
+
+ if (test_bit(STRIPE_OP_PREXOR, &pending))
+ tx = ops_run_prexor(sh, tx);
+
+ if (test_bit(STRIPE_OP_BIODRAIN, &pending)) {
+ tx = ops_run_biodrain(sh, tx);
+ overlap_clear++;
+ }
+
+ if (test_bit(STRIPE_OP_POSTXOR, &pending))
+ ops_run_postxor(sh, tx);
+
+ if (test_bit(STRIPE_OP_CHECK, &pending))
+ ops_run_check(sh);
+
+ if (test_bit(STRIPE_OP_IO, &pending))
+ ops_run_io(sh);
+
+ if (overlap_clear)
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (test_and_clear_bit(R5_Overlap, &dev->flags))
+ wake_up(&sh->raid_conf->wait_for_overlap);
+ }
+}
+
static int grow_one_stripe(raid5_conf_t *conf)
{
struct stripe_head *sh;
@@ -537,8 +1130,8 @@ static int raid5_end_read_request(struct bio * bi, unsigned int bytes_done,
if (bi == &sh->dev[i].req)
break;
- PRINTK("end_read_request %llu/%d, count: %d, uptodate %d.\n",
- (unsigned long long)sh->sector, i, atomic_read(&sh->count),
+ pr_debug("end_read_request %llu/%d, count: %d, uptodate %d.\n",
+ (unsigned long long)sh->sector, i, atomic_read(&sh->count),
uptodate);
if (i == disks) {
BUG();
@@ -613,7 +1206,7 @@ static int raid5_end_write_request (struct bio *bi, unsigned int bytes_done,
if (bi == &sh->dev[i].req)
break;
- PRINTK("end_write_request %llu/%d, count %d, uptodate: %d.\n",
+ pr_debug("end_write_request %llu/%d, count %d, uptodate: %d.\n",
(unsigned long long)sh->sector, i, atomic_read(&sh->count),
uptodate);
if (i == disks) {
@@ -658,7 +1251,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev)
{
char b[BDEVNAME_SIZE];
raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
- PRINTK("raid5: error called\n");
+ pr_debug("raid5: error called\n");
if (!test_bit(Faulty, &rdev->flags)) {
set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -916,137 +1509,13 @@ static void copy_data(int frombio, struct bio *bio,
}
}
-#define check_xor() do { \
- if (count == MAX_XOR_BLOCKS) { \
- xor_block(count, STRIPE_SIZE, ptr); \
- count = 1; \
- } \
+#define check_xor() do { \
+ if (count == MAX_XOR_BLOCKS) { \
+ xor_blocks(count, STRIPE_SIZE, dest, ptr);\
+ count = 0; \
+ } \
} while(0)
-
-static void compute_block(struct stripe_head *sh, int dd_idx)
-{
- int i, count, disks = sh->disks;
- void *ptr[MAX_XOR_BLOCKS], *p;
-
- PRINTK("compute_block, stripe %llu, idx %d\n",
- (unsigned long long)sh->sector, dd_idx);
-
- ptr[0] = page_address(sh->dev[dd_idx].page);
- memset(ptr[0], 0, STRIPE_SIZE);
- count = 1;
- for (i = disks ; i--; ) {
- if (i == dd_idx)
- continue;
- p = page_address(sh->dev[i].page);
- if (test_bit(R5_UPTODATE, &sh->dev[i].flags))
- ptr[count++] = p;
- else
- printk(KERN_ERR "compute_block() %d, stripe %llu, %d"
- " not present\n", dd_idx,
- (unsigned long long)sh->sector, i);
-
- check_xor();
- }
- if (count != 1)
- xor_block(count, STRIPE_SIZE, ptr);
- set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
-}
-
-static void compute_parity5(struct stripe_head *sh, int method)
-{
- raid5_conf_t *conf = sh->raid_conf;
- int i, pd_idx = sh->pd_idx, disks = sh->disks, count;
- void *ptr[MAX_XOR_BLOCKS];
- struct bio *chosen;
-
- PRINTK("compute_parity5, stripe %llu, method %d\n",
- (unsigned long long)sh->sector, method);
-
- count = 1;
- ptr[0] = page_address(sh->dev[pd_idx].page);
- switch(method) {
- case READ_MODIFY_WRITE:
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags));
- for (i=disks ; i-- ;) {
- if (i==pd_idx)
- continue;
- if (sh->dev[i].towrite &&
- test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
- ptr[count++] = page_address(sh->dev[i].page);
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- check_xor();
- }
- }
- break;
- case RECONSTRUCT_WRITE:
- memset(ptr[0], 0, STRIPE_SIZE);
- for (i= disks; i-- ;)
- if (i!=pd_idx && sh->dev[i].towrite) {
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- }
- break;
- case CHECK_PARITY:
- break;
- }
- if (count>1) {
- xor_block(count, STRIPE_SIZE, ptr);
- count = 1;
- }
-
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- sector_t sector = sh->dev[i].sector;
- struct bio *wbi = sh->dev[i].written;
- while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) {
- copy_data(1, wbi, sh->dev[i].page, sector);
- wbi = r5_next_bio(wbi, sector);
- }
-
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(R5_UPTODATE, &sh->dev[i].flags);
- }
-
- switch(method) {
- case RECONSTRUCT_WRITE:
- case CHECK_PARITY:
- for (i=disks; i--;)
- if (i != pd_idx) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- break;
- case READ_MODIFY_WRITE:
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- }
- if (count != 1)
- xor_block(count, STRIPE_SIZE, ptr);
-
- if (method != CHECK_PARITY) {
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
- } else
- clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
-}
-
static void compute_parity6(struct stripe_head *sh, int method)
{
raid6_conf_t *conf = sh->raid_conf;
@@ -1058,7 +1527,7 @@ static void compute_parity6(struct stripe_head *sh, int method)
qd_idx = raid6_next_disk(pd_idx, disks);
d0_idx = raid6_next_disk(qd_idx, disks);
- PRINTK("compute_parity, stripe %llu, method %d\n",
+ pr_debug("compute_parity, stripe %llu, method %d\n",
(unsigned long long)sh->sector, method);
switch(method) {
@@ -1132,20 +1601,20 @@ static void compute_parity6(struct stripe_head *sh, int method)
static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero)
{
int i, count, disks = sh->disks;
- void *ptr[MAX_XOR_BLOCKS], *p;
+ void *ptr[MAX_XOR_BLOCKS], *dest, *p;
int pd_idx = sh->pd_idx;
int qd_idx = raid6_next_disk(pd_idx, disks);
- PRINTK("compute_block_1, stripe %llu, idx %d\n",
+ pr_debug("compute_block_1, stripe %llu, idx %d\n",
(unsigned long long)sh->sector, dd_idx);
if ( dd_idx == qd_idx ) {
/* We're actually computing the Q drive */
compute_parity6(sh, UPDATE_PARITY);
} else {
- ptr[0] = page_address(sh->dev[dd_idx].page);
- if (!nozero) memset(ptr[0], 0, STRIPE_SIZE);
- count = 1;
+ dest = page_address(sh->dev[dd_idx].page);
+ if (!nozero) memset(dest, 0, STRIPE_SIZE);
+ count = 0;
for (i = disks ; i--; ) {
if (i == dd_idx || i == qd_idx)
continue;
@@ -1159,8 +1628,8 @@ static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero)
check_xor();
}
- if (count != 1)
- xor_block(count, STRIPE_SIZE, ptr);
+ if (count)
+ xor_blocks(count, STRIPE_SIZE, dest, ptr);
if (!nozero) set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
else clear_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
}
@@ -1183,7 +1652,7 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
BUG_ON(faila == failb);
if ( failb < faila ) { int tmp = faila; faila = failb; failb = tmp; }
- PRINTK("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n",
+ pr_debug("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n",
(unsigned long long)sh->sector, dd_idx1, dd_idx2, faila, failb);
if ( failb == disks-1 ) {
@@ -1229,7 +1698,79 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
}
}
+static int
+handle_write_operations5(struct stripe_head *sh, int rcw, int expand)
+{
+ int i, pd_idx = sh->pd_idx, disks = sh->disks;
+ int locked = 0;
+ if (rcw) {
+ /* if we are not expanding this is a proper write request, and
+ * there will be bios with new data to be drained into the
+ * stripe cache
+ */
+ if (!expand) {
+ set_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending);
+ sh->ops.count++;
+ }
+
+ set_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
+ sh->ops.count++;
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+
+ if (dev->towrite) {
+ set_bit(R5_LOCKED, &dev->flags);
+ if (!expand)
+ clear_bit(R5_UPTODATE, &dev->flags);
+ locked++;
+ }
+ }
+ } else {
+ BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
+ test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
+
+ set_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
+ set_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending);
+ set_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
+
+ sh->ops.count += 3;
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (i == pd_idx)
+ continue;
+
+ /* For a read-modify write there may be blocks that are
+ * locked for reading while others are ready to be
+ * written so we distinguish these blocks by the
+ * R5_Wantprexor bit
+ */
+ if (dev->towrite &&
+ (test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ set_bit(R5_Wantprexor, &dev->flags);
+ set_bit(R5_LOCKED, &dev->flags);
+ clear_bit(R5_UPTODATE, &dev->flags);
+ locked++;
+ }
+ }
+ }
+
+ /* keep the parity disk locked while asynchronous operations
+ * are in flight
+ */
+ set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
+ locked++;
+
+ pr_debug("%s: stripe %llu locked: %d pending: %lx\n",
+ __FUNCTION__, (unsigned long long)sh->sector,
+ locked, sh->ops.pending);
+
+ return locked;
+}
/*
* Each stripe/dev can have one or more bion attached.
@@ -1242,7 +1783,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
raid5_conf_t *conf = sh->raid_conf;
int firstwrite=0;
- PRINTK("adding bh b#%llu to stripe s#%llu\n",
+ pr_debug("adding bh b#%llu to stripe s#%llu\n",
(unsigned long long)bi->bi_sector,
(unsigned long long)sh->sector);
@@ -1271,7 +1812,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
spin_unlock_irq(&conf->device_lock);
spin_unlock(&sh->lock);
- PRINTK("added bi b#%llu to stripe s#%llu, disk %d.\n",
+ pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n",
(unsigned long long)bi->bi_sector,
(unsigned long long)sh->sector, dd_idx);
@@ -1326,6 +1867,729 @@ static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks)
return pd_idx;
}
+static void
+handle_requests_to_failed_array(raid5_conf_t *conf, struct stripe_head *sh,
+ struct stripe_head_state *s, int disks,
+ struct bio **return_bi)
+{
+ int i;
+ for (i = disks; i--; ) {
+ struct bio *bi;
+ int bitmap_end = 0;
+
+ if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
+ mdk_rdev_t *rdev;
+ rcu_read_lock();
+ rdev = rcu_dereference(conf->disks[i].rdev);
+ if (rdev && test_bit(In_sync, &rdev->flags))
+ /* multiple read failures in one stripe */
+ md_error(conf->mddev, rdev);
+ rcu_read_unlock();
+ }
+ spin_lock_irq(&conf->device_lock);
+ /* fail all writes first */
+ bi = sh->dev[i].towrite;
+ sh->dev[i].towrite = NULL;
+ if (bi) {
+ s->to_write--;
+ bitmap_end = 1;
+ }
+
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
+ wake_up(&conf->wait_for_overlap);
+
+ while (bi && bi->bi_sector <
+ sh->dev[i].sector + STRIPE_SECTORS) {
+ struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
+ clear_bit(BIO_UPTODATE, &bi->bi_flags);
+ if (--bi->bi_phys_segments == 0) {
+ md_write_end(conf->mddev);
+ bi->bi_next = *return_bi;
+ *return_bi = bi;
+ }
+ bi = nextbi;
+ }
+ /* and fail all 'written' */
+ bi = sh->dev[i].written;
+ sh->dev[i].written = NULL;
+ if (bi) bitmap_end = 1;
+ while (bi && bi->bi_sector <
+ sh->dev[i].sector + STRIPE_SECTORS) {
+ struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
+ clear_bit(BIO_UPTODATE, &bi->bi_flags);
+ if (--bi->bi_phys_segments == 0) {
+ md_write_end(conf->mddev);
+ bi->bi_next = *return_bi;
+ *return_bi = bi;
+ }
+ bi = bi2;
+ }
+
+ /* fail any reads if this device is non-operational and
+ * the data has not reached the cache yet.
+ */
+ if (!test_bit(R5_Wantfill, &sh->dev[i].flags) &&
+ (!test_bit(R5_Insync, &sh->dev[i].flags) ||
+ test_bit(R5_ReadError, &sh->dev[i].flags))) {
+ bi = sh->dev[i].toread;
+ sh->dev[i].toread = NULL;
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
+ wake_up(&conf->wait_for_overlap);
+ if (bi) s->to_read--;
+ while (bi && bi->bi_sector <
+ sh->dev[i].sector + STRIPE_SECTORS) {
+ struct bio *nextbi =
+ r5_next_bio(bi, sh->dev[i].sector);
+ clear_bit(BIO_UPTODATE, &bi->bi_flags);
+ if (--bi->bi_phys_segments == 0) {
+ bi->bi_next = *return_bi;
+ *return_bi = bi;
+ }
+ bi = nextbi;
+ }
+ }
+ spin_unlock_irq(&conf->device_lock);
+ if (bitmap_end)
+ bitmap_endwrite(conf->mddev->bitmap, sh->sector,
+ STRIPE_SECTORS, 0, 0);
+ }
+
+}
+
+/* __handle_issuing_new_read_requests5 - returns 0 if there are no more disks
+ * to process
+ */
+static int __handle_issuing_new_read_requests5(struct stripe_head *sh,
+ struct stripe_head_state *s, int disk_idx, int disks)
+{
+ struct r5dev *dev = &sh->dev[disk_idx];
+ struct r5dev *failed_dev = &sh->dev[s->failed_num];
+
+ /* don't schedule compute operations or reads on the parity block while
+ * a check is in flight
+ */
+ if ((disk_idx == sh->pd_idx) &&
+ test_bit(STRIPE_OP_CHECK, &sh->ops.pending))
+ return ~0;
+
+ /* is the data in this block needed, and can we get it? */
+ if (!test_bit(R5_LOCKED, &dev->flags) &&
+ !test_bit(R5_UPTODATE, &dev->flags) && (dev->toread ||
+ (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
+ s->syncing || s->expanding || (s->failed &&
+ (failed_dev->toread || (failed_dev->towrite &&
+ !test_bit(R5_OVERWRITE, &failed_dev->flags)
+ ))))) {
+ /* 1/ We would like to get this block, possibly by computing it,
+ * but we might not be able to.
+ *
+ * 2/ Since parity check operations potentially make the parity
+ * block !uptodate it will need to be refreshed before any
+ * compute operations on data disks are scheduled.
+ *
+ * 3/ We hold off parity block re-reads until check operations
+ * have quiesced.
+ */
+ if ((s->uptodate == disks - 1) &&
+ !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
+ set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
+ set_bit(R5_Wantcompute, &dev->flags);
+ sh->ops.target = disk_idx;
+ s->req_compute = 1;
+ sh->ops.count++;
+ /* Careful: from this point on 'uptodate' is in the eye
+ * of raid5_run_ops which services 'compute' operations
+ * before writes. R5_Wantcompute flags a block that will
+ * be R5_UPTODATE by the time it is needed for a
+ * subsequent operation.
+ */
+ s->uptodate++;
+ return 0; /* uptodate + compute == disks */
+ } else if ((s->uptodate < disks - 1) &&
+ test_bit(R5_Insync, &dev->flags)) {
+ /* Note: we hold off compute operations while checks are
+ * in flight, but we still prefer 'compute' over 'read'
+ * hence we only read if (uptodate < * disks-1)
+ */
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
+ sh->ops.count++;
+ s->locked++;
+ pr_debug("Reading block %d (sync=%d)\n", disk_idx,
+ s->syncing);
+ }
+ }
+
+ return ~0;
+}
+
+static void handle_issuing_new_read_requests5(struct stripe_head *sh,
+ struct stripe_head_state *s, int disks)
+{
+ int i;
+
+ /* Clear completed compute operations. Parity recovery
+ * (STRIPE_OP_MOD_REPAIR_PD) implies a write-back which is handled
+ * later on in this routine
+ */
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
+ !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
+ }
+
+ /* look for blocks to read/compute, skip this if a compute
+ * is already in flight, or if the stripe contents are in the
+ * midst of changing due to a write
+ */
+ if (!test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending) &&
+ !test_bit(STRIPE_OP_PREXOR, &sh->ops.pending) &&
+ !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
+ for (i = disks; i--; )
+ if (__handle_issuing_new_read_requests5(
+ sh, s, i, disks) == 0)
+ break;
+ }
+ set_bit(STRIPE_HANDLE, &sh->state);
+}
+
+static void handle_issuing_new_read_requests6(struct stripe_head *sh,
+ struct stripe_head_state *s, struct r6_state *r6s,
+ int disks)
+{
+ int i;
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (!test_bit(R5_LOCKED, &dev->flags) &&
+ !test_bit(R5_UPTODATE, &dev->flags) &&
+ (dev->toread || (dev->towrite &&
+ !test_bit(R5_OVERWRITE, &dev->flags)) ||
+ s->syncing || s->expanding ||
+ (s->failed >= 1 &&
+ (sh->dev[r6s->failed_num[0]].toread ||
+ s->to_write)) ||
+ (s->failed >= 2 &&
+ (sh->dev[r6s->failed_num[1]].toread ||
+ s->to_write)))) {
+ /* we would like to get this block, possibly
+ * by computing it, but we might not be able to
+ */
+ if (s->uptodate == disks-1) {
+ pr_debug("Computing stripe %llu block %d\n",
+ (unsigned long long)sh->sector, i);
+ compute_block_1(sh, i, 0);
+ s->uptodate++;
+ } else if ( s->uptodate == disks-2 && s->failed >= 2 ) {
+ /* Computing 2-failure is *very* expensive; only
+ * do it if failed >= 2
+ */
+ int other;
+ for (other = disks; other--; ) {
+ if (other == i)
+ continue;
+ if (!test_bit(R5_UPTODATE,
+ &sh->dev[other].flags))
+ break;
+ }
+ BUG_ON(other < 0);
+ pr_debug("Computing stripe %llu blocks %d,%d\n",
+ (unsigned long long)sh->sector,
+ i, other);
+ compute_block_2(sh, i, other);
+ s->uptodate += 2;
+ } else if (test_bit(R5_Insync, &dev->flags)) {
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ pr_debug("Reading block %d (sync=%d)\n",
+ i, s->syncing);
+ }
+ }
+ }
+ set_bit(STRIPE_HANDLE, &sh->state);
+}
+
+
+/* handle_completed_write_requests
+ * any written block on an uptodate or failed drive can be returned.
+ * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but
+ * never LOCKED, so we don't need to test 'failed' directly.
+ */
+static void handle_completed_write_requests(raid5_conf_t *conf,
+ struct stripe_head *sh, int disks, struct bio **return_bi)
+{
+ int i;
+ struct r5dev *dev;
+
+ for (i = disks; i--; )
+ if (sh->dev[i].written) {
+ dev = &sh->dev[i];
+ if (!test_bit(R5_LOCKED, &dev->flags) &&
+ test_bit(R5_UPTODATE, &dev->flags)) {
+ /* We can return any write requests */
+ struct bio *wbi, *wbi2;
+ int bitmap_end = 0;
+ pr_debug("Return write for disc %d\n", i);
+ spin_lock_irq(&conf->device_lock);
+ wbi = dev->written;
+ dev->written = NULL;
+ while (wbi && wbi->bi_sector <
+ dev->sector + STRIPE_SECTORS) {
+ wbi2 = r5_next_bio(wbi, dev->sector);
+ if (--wbi->bi_phys_segments == 0) {
+ md_write_end(conf->mddev);
+ wbi->bi_next = *return_bi;
+ *return_bi = wbi;
+ }
+ wbi = wbi2;
+ }
+ if (dev->towrite == NULL)
+ bitmap_end = 1;
+ spin_unlock_irq(&conf->device_lock);
+ if (bitmap_end)
+ bitmap_endwrite(conf->mddev->bitmap,
+ sh->sector,
+ STRIPE_SECTORS,
+ !test_bit(STRIPE_DEGRADED, &sh->state),
+ 0);
+ }
+ }
+}
+
+static void handle_issuing_new_write_requests5(raid5_conf_t *conf,
+ struct stripe_head *sh, struct stripe_head_state *s, int disks)
+{
+ int rmw = 0, rcw = 0, i;
+ for (i = disks; i--; ) {
+ /* would I have to read this buffer for read_modify_write */
+ struct r5dev *dev = &sh->dev[i];
+ if ((dev->towrite || i == sh->pd_idx) &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ if (test_bit(R5_Insync, &dev->flags))
+ rmw++;
+ else
+ rmw += 2*disks; /* cannot read it */
+ }
+ /* Would I have to read this buffer for reconstruct_write */
+ if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ if (test_bit(R5_Insync, &dev->flags)) rcw++;
+ else
+ rcw += 2*disks;
+ }
+ }
+ pr_debug("for sector %llu, rmw=%d rcw=%d\n",
+ (unsigned long long)sh->sector, rmw, rcw);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ if (rmw < rcw && rmw > 0)
+ /* prefer read-modify-write, but need to get some data */
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if ((dev->towrite || i == sh->pd_idx) &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags)) &&
+ test_bit(R5_Insync, &dev->flags)) {
+ if (
+ test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ pr_debug("Read_old block "
+ "%d for r-m-w\n", i);
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ if (!test_and_set_bit(
+ STRIPE_OP_IO, &sh->ops.pending))
+ sh->ops.count++;
+ s->locked++;
+ } else {
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ }
+ }
+ }
+ if (rcw <= rmw && rcw > 0)
+ /* want reconstruct write, but need to get some data */
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (!test_bit(R5_OVERWRITE, &dev->flags) &&
+ i != sh->pd_idx &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags)) &&
+ test_bit(R5_Insync, &dev->flags)) {
+ if (
+ test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ pr_debug("Read_old block "
+ "%d for Reconstruct\n", i);
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ if (!test_and_set_bit(
+ STRIPE_OP_IO, &sh->ops.pending))
+ sh->ops.count++;
+ s->locked++;
+ } else {
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ }
+ }
+ }
+ /* now if nothing is locked, and if we have enough data,
+ * we can start a write request
+ */
+ /* since handle_stripe can be called at any time we need to handle the
+ * case where a compute block operation has been submitted and then a
+ * subsequent call wants to start a write request. raid5_run_ops only
+ * handles the case where compute block and postxor are requested
+ * simultaneously. If this is not the case then new writes need to be
+ * held off until the compute completes.
+ */
+ if ((s->req_compute ||
+ !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) &&
+ (s->locked == 0 && (rcw == 0 || rmw == 0) &&
+ !test_bit(STRIPE_BIT_DELAY, &sh->state)))
+ s->locked += handle_write_operations5(sh, rcw == 0, 0);
+}
+
+static void handle_issuing_new_write_requests6(raid5_conf_t *conf,
+ struct stripe_head *sh, struct stripe_head_state *s,
+ struct r6_state *r6s, int disks)
+{
+ int rcw = 0, must_compute = 0, pd_idx = sh->pd_idx, i;
+ int qd_idx = r6s->qd_idx;
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ /* Would I have to read this buffer for reconstruct_write */
+ if (!test_bit(R5_OVERWRITE, &dev->flags)
+ && i != pd_idx && i != qd_idx
+ && (!test_bit(R5_LOCKED, &dev->flags)
+ ) &&
+ !test_bit(R5_UPTODATE, &dev->flags)) {
+ if (test_bit(R5_Insync, &dev->flags)) rcw++;
+ else {
+ pr_debug("raid6: must_compute: "
+ "disk %d flags=%#lx\n", i, dev->flags);
+ must_compute++;
+ }
+ }
+ }
+ pr_debug("for sector %llu, rcw=%d, must_compute=%d\n",
+ (unsigned long long)sh->sector, rcw, must_compute);
+ set_bit(STRIPE_HANDLE, &sh->state);
+
+ if (rcw > 0)
+ /* want reconstruct write, but need to get some data */
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (!test_bit(R5_OVERWRITE, &dev->flags)
+ && !(s->failed == 0 && (i == pd_idx || i == qd_idx))
+ && !test_bit(R5_LOCKED, &dev->flags) &&
+ !test_bit(R5_UPTODATE, &dev->flags) &&
+ test_bit(R5_Insync, &dev->flags)) {
+ if (
+ test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ pr_debug("Read_old stripe %llu "
+ "block %d for Reconstruct\n",
+ (unsigned long long)sh->sector, i);
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ } else {
+ pr_debug("Request delayed stripe %llu "
+ "block %d for Reconstruct\n",
+ (unsigned long long)sh->sector, i);
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ }
+ }
+ }
+ /* now if nothing is locked, and if we have enough data, we can start a
+ * write request
+ */
+ if (s->locked == 0 && rcw == 0 &&
+ !test_bit(STRIPE_BIT_DELAY, &sh->state)) {
+ if (must_compute > 0) {
+ /* We have failed blocks and need to compute them */
+ switch (s->failed) {
+ case 0:
+ BUG();
+ case 1:
+ compute_block_1(sh, r6s->failed_num[0], 0);
+ break;
+ case 2:
+ compute_block_2(sh, r6s->failed_num[0],
+ r6s->failed_num[1]);
+ break;
+ default: /* This request should have been failed? */
+ BUG();
+ }
+ }
+
+ pr_debug("Computing parity for stripe %llu\n",
+ (unsigned long long)sh->sector);
+ compute_parity6(sh, RECONSTRUCT_WRITE);
+ /* now every locked buffer is ready to be written */
+ for (i = disks; i--; )
+ if (test_bit(R5_LOCKED, &sh->dev[i].flags)) {
+ pr_debug("Writing stripe %llu block %d\n",
+ (unsigned long long)sh->sector, i);
+ s->locked++;
+ set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ }
+ /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
+ set_bit(STRIPE_INSYNC, &sh->state);
+
+ if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ atomic_dec(&conf->preread_active_stripes);
+ if (atomic_read(&conf->preread_active_stripes) <
+ IO_THRESHOLD)
+ md_wakeup_thread(conf->mddev->thread);
+ }
+ }
+}
+
+static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
+ struct stripe_head_state *s, int disks)
+{
+ set_bit(STRIPE_HANDLE, &sh->state);
+ /* Take one of the following actions:
+ * 1/ start a check parity operation if (uptodate == disks)
+ * 2/ finish a check parity operation and act on the result
+ * 3/ skip to the writeback section if we previously
+ * initiated a recovery operation
+ */
+ if (s->failed == 0 &&
+ !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+ if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
+ BUG_ON(s->uptodate != disks);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
+ sh->ops.count++;
+ s->uptodate--;
+ } else if (
+ test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+
+ if (sh->ops.zero_sum_result == 0)
+ /* parity is correct (on disc,
+ * not in buffer any more)
+ */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ conf->mddev->resync_mismatches +=
+ STRIPE_SECTORS;
+ if (test_bit(
+ MD_RECOVERY_CHECK, &conf->mddev->recovery))
+ /* don't try to repair!! */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ set_bit(STRIPE_OP_COMPUTE_BLK,
+ &sh->ops.pending);
+ set_bit(STRIPE_OP_MOD_REPAIR_PD,
+ &sh->ops.pending);
+ set_bit(R5_Wantcompute,
+ &sh->dev[sh->pd_idx].flags);
+ sh->ops.target = sh->pd_idx;
+ sh->ops.count++;
+ s->uptodate++;
+ }
+ }
+ }
+ }
+
+ /* check if we can clear a parity disk reconstruct */
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
+ test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+
+ clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
+ }
+
+ /* Wait for check parity and compute block operations to complete
+ * before write-back
+ */
+ if (!test_bit(STRIPE_INSYNC, &sh->state) &&
+ !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
+ !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
+ struct r5dev *dev;
+ /* either failed parity check, or recovery is happening */
+ if (s->failed == 0)
+ s->failed_num = sh->pd_idx;
+ dev = &sh->dev[s->failed_num];
+ BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
+ BUG_ON(s->uptodate != disks);
+
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
+ sh->ops.count++;
+
+ clear_bit(STRIPE_DEGRADED, &sh->state);
+ s->locked++;
+ set_bit(STRIPE_INSYNC, &sh->state);
+ }
+}
+
+
+static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh,
+ struct stripe_head_state *s,
+ struct r6_state *r6s, struct page *tmp_page,
+ int disks)
+{
+ int update_p = 0, update_q = 0;
+ struct r5dev *dev;
+ int pd_idx = sh->pd_idx;
+ int qd_idx = r6s->qd_idx;
+
+ set_bit(STRIPE_HANDLE, &sh->state);
+
+ BUG_ON(s->failed > 2);
+ BUG_ON(s->uptodate < disks);
+ /* Want to check and possibly repair P and Q.
+ * However there could be one 'failed' device, in which
+ * case we can only check one of them, possibly using the
+ * other to generate missing data
+ */
+
+ /* If !tmp_page, we cannot do the calculations,
+ * but as we have set STRIPE_HANDLE, we will soon be called
+ * by stripe_handle with a tmp_page - just wait until then.
+ */
+ if (tmp_page) {
+ if (s->failed == r6s->q_failed) {
+ /* The only possible failed device holds 'Q', so it
+ * makes sense to check P (If anything else were failed,
+ * we would have used P to recreate it).
+ */
+ compute_block_1(sh, pd_idx, 1);
+ if (!page_is_zero(sh->dev[pd_idx].page)) {
+ compute_block_1(sh, pd_idx, 0);
+ update_p = 1;
+ }
+ }
+ if (!r6s->q_failed && s->failed < 2) {
+ /* q is not failed, and we didn't use it to generate
+ * anything, so it makes sense to check it
+ */
+ memcpy(page_address(tmp_page),
+ page_address(sh->dev[qd_idx].page),
+ STRIPE_SIZE);
+ compute_parity6(sh, UPDATE_PARITY);
+ if (memcmp(page_address(tmp_page),
+ page_address(sh->dev[qd_idx].page),
+ STRIPE_SIZE) != 0) {
+ clear_bit(STRIPE_INSYNC, &sh->state);
+ update_q = 1;
+ }
+ }
+ if (update_p || update_q) {
+ conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
+ /* don't try to repair!! */
+ update_p = update_q = 0;
+ }
+
+ /* now write out any block on a failed drive,
+ * or P or Q if they need it
+ */
+
+ if (s->failed == 2) {
+ dev = &sh->dev[r6s->failed_num[1]];
+ s->locked++;
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ }
+ if (s->failed >= 1) {
+ dev = &sh->dev[r6s->failed_num[0]];
+ s->locked++;
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ }
+
+ if (update_p) {
+ dev = &sh->dev[pd_idx];
+ s->locked++;
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ }
+ if (update_q) {
+ dev = &sh->dev[qd_idx];
+ s->locked++;
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ }
+ clear_bit(STRIPE_DEGRADED, &sh->state);
+
+ set_bit(STRIPE_INSYNC, &sh->state);
+ }
+}
+
+static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh,
+ struct r6_state *r6s)
+{
+ int i;
+
+ /* We have read all the blocks in this stripe and now we need to
+ * copy some of them into a target stripe for expand.
+ */
+ struct dma_async_tx_descriptor *tx = NULL;
+ clear_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ for (i = 0; i < sh->disks; i++)
+ if (i != sh->pd_idx && (r6s && i != r6s->qd_idx)) {
+ int dd_idx, pd_idx, j;
+ struct stripe_head *sh2;
+
+ sector_t bn = compute_blocknr(sh, i);
+ sector_t s = raid5_compute_sector(bn, conf->raid_disks,
+ conf->raid_disks -
+ conf->max_degraded, &dd_idx,
+ &pd_idx, conf);
+ sh2 = get_active_stripe(conf, s, conf->raid_disks,
+ pd_idx, 1);
+ if (sh2 == NULL)
+ /* so far only the early blocks of this stripe
+ * have been requested. When later blocks
+ * get requested, we will try again
+ */
+ continue;
+ if (!test_bit(STRIPE_EXPANDING, &sh2->state) ||
+ test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) {
+ /* must have already done this block */
+ release_stripe(sh2);
+ continue;
+ }
+
+ /* place all the copies on one channel */
+ tx = async_memcpy(sh2->dev[dd_idx].page,
+ sh->dev[i].page, 0, 0, STRIPE_SIZE,
+ ASYNC_TX_DEP_ACK, tx, NULL, NULL);
+
+ set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
+ set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
+ for (j = 0; j < conf->raid_disks; j++)
+ if (j != sh2->pd_idx &&
+ (r6s && j != r6s->qd_idx) &&
+ !test_bit(R5_Expanded, &sh2->dev[j].flags))
+ break;
+ if (j == conf->raid_disks) {
+ set_bit(STRIPE_EXPAND_READY, &sh2->state);
+ set_bit(STRIPE_HANDLE, &sh2->state);
+ }
+ release_stripe(sh2);
+
+ /* done submitting copies, wait for them to complete */
+ if (i + 1 >= sh->disks) {
+ async_tx_ack(tx);
+ dma_wait_for_async_tx(tx);
+ }
+ }
+}
/*
* handle_stripe - do things to a stripe.
@@ -1339,81 +2603,70 @@ static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks)
* schedule a write of some buffers
* return confirmation of parity correctness
*
- * Parity calculations are done inside the stripe lock
* buffers are taken off read_list or write_list, and bh_cache buffers
* get BH_Lock set before the stripe lock is released.
*
*/
-
+
static void handle_stripe5(struct stripe_head *sh)
{
raid5_conf_t *conf = sh->raid_conf;
- int disks = sh->disks;
- struct bio *return_bi= NULL;
- struct bio *bi;
- int i;
- int syncing, expanding, expanded;
- int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0;
- int non_overwrite = 0;
- int failed_num=0;
+ int disks = sh->disks, i;
+ struct bio *return_bi = NULL;
+ struct stripe_head_state s;
struct r5dev *dev;
+ unsigned long pending = 0;
- PRINTK("handling stripe %llu, cnt=%d, pd_idx=%d\n",
- (unsigned long long)sh->sector, atomic_read(&sh->count),
- sh->pd_idx);
+ memset(&s, 0, sizeof(s));
+ pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d "
+ "ops=%lx:%lx:%lx\n", (unsigned long long)sh->sector, sh->state,
+ atomic_read(&sh->count), sh->pd_idx,
+ sh->ops.pending, sh->ops.ack, sh->ops.complete);
spin_lock(&sh->lock);
clear_bit(STRIPE_HANDLE, &sh->state);
clear_bit(STRIPE_DELAYED, &sh->state);
- syncing = test_bit(STRIPE_SYNCING, &sh->state);
- expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
- expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
+ s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
+ s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
/* Now to look around and see what can be done */
rcu_read_lock();
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
- dev = &sh->dev[i];
+ struct r5dev *dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
- PRINTK("check %d: state 0x%lx read %p write %p written %p\n",
- i, dev->flags, dev->toread, dev->towrite, dev->written);
- /* maybe we can reply to a read */
- if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
- struct bio *rbi, *rbi2;
- PRINTK("Return read for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
- rbi = dev->toread;
- dev->toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &dev->flags))
- wake_up(&conf->wait_for_overlap);
- spin_unlock_irq(&conf->device_lock);
- while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- copy_data(0, rbi, dev->page, dev->sector);
- rbi2 = r5_next_bio(rbi, dev->sector);
- spin_lock_irq(&conf->device_lock);
- if (--rbi->bi_phys_segments == 0) {
- rbi->bi_next = return_bi;
- return_bi = rbi;
- }
- spin_unlock_irq(&conf->device_lock);
- rbi = rbi2;
- }
- }
+ pr_debug("check %d: state 0x%lx toread %p read %p write %p "
+ "written %p\n", i, dev->flags, dev->toread, dev->read,
+ dev->towrite, dev->written);
- /* now count some things */
- if (test_bit(R5_LOCKED, &dev->flags)) locked++;
- if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++;
+ /* maybe we can request a biofill operation
+ *
+ * new wantfill requests are only permitted while
+ * STRIPE_OP_BIOFILL is clear
+ */
+ if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread &&
+ !test_bit(STRIPE_OP_BIOFILL, &sh->ops.pending))
+ set_bit(R5_Wantfill, &dev->flags);
-
- if (dev->toread) to_read++;
+ /* now count some things */
+ if (test_bit(R5_LOCKED, &dev->flags)) s.locked++;
+ if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++;
+ if (test_bit(R5_Wantcompute, &dev->flags)) s.compute++;
+
+ if (test_bit(R5_Wantfill, &dev->flags))
+ s.to_fill++;
+ else if (dev->toread)
+ s.to_read++;
if (dev->towrite) {
- to_write++;
+ s.to_write++;
if (!test_bit(R5_OVERWRITE, &dev->flags))
- non_overwrite++;
+ s.non_overwrite++;
}
- if (dev->written) written++;
+ if (dev->written)
+ s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
@@ -1422,306 +2675,131 @@ static void handle_stripe5(struct stripe_head *sh)
}
if (!rdev || !test_bit(In_sync, &rdev->flags)
|| test_bit(R5_ReadError, &dev->flags)) {
- failed++;
- failed_num = i;
+ s.failed++;
+ s.failed_num = i;
} else
set_bit(R5_Insync, &dev->flags);
}
rcu_read_unlock();
- PRINTK("locked=%d uptodate=%d to_read=%d"
+
+ if (s.to_fill && !test_and_set_bit(STRIPE_OP_BIOFILL, &sh->ops.pending))
+ sh->ops.count++;
+
+ pr_debug("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d\n",
- locked, uptodate, to_read, to_write, failed, failed_num);
+ s.locked, s.uptodate, s.to_read, s.to_write,
+ s.failed, s.failed_num);
/* check if the array has lost two devices and, if so, some requests might
* need to be failed
*/
- if (failed > 1 && to_read+to_write+written) {
- for (i=disks; i--; ) {
- int bitmap_end = 0;
-
- if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
- mdk_rdev_t *rdev;
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(In_sync, &rdev->flags))
- /* multiple read failures in one stripe */
- md_error(conf->mddev, rdev);
- rcu_read_unlock();
- }
-
- spin_lock_irq(&conf->device_lock);
- /* fail all writes first */
- bi = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
- if (bi) { to_write--; bitmap_end = 1; }
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){
- struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = nextbi;
- }
- /* and fail all 'written' */
- bi = sh->dev[i].written;
- sh->dev[i].written = NULL;
- if (bi) bitmap_end = 1;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) {
- struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = bi2;
- }
-
- /* fail any reads if this device is non-operational */
- if (!test_bit(R5_Insync, &sh->dev[i].flags) ||
- test_bit(R5_ReadError, &sh->dev[i].flags)) {
- bi = sh->dev[i].toread;
- sh->dev[i].toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
- if (bi) to_read--;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){
- struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = nextbi;
- }
- }
- spin_unlock_irq(&conf->device_lock);
- if (bitmap_end)
- bitmap_endwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS, 0, 0);
- }
- }
- if (failed > 1 && syncing) {
+ if (s.failed > 1 && s.to_read+s.to_write+s.written)
+ handle_requests_to_failed_array(conf, sh, &s, disks,
+ &return_bi);
+ if (s.failed > 1 && s.syncing) {
md_done_sync(conf->mddev, STRIPE_SECTORS,0);
clear_bit(STRIPE_SYNCING, &sh->state);
- syncing = 0;
+ s.syncing = 0;
}
/* might be able to return some write requests if the parity block
* is safe, or on a failed drive
*/
dev = &sh->dev[sh->pd_idx];
- if ( written &&
- ( (test_bit(R5_Insync, &dev->flags) && !test_bit(R5_LOCKED, &dev->flags) &&
- test_bit(R5_UPTODATE, &dev->flags))
- || (failed == 1 && failed_num == sh->pd_idx))
- ) {
- /* any written block on an uptodate or failed drive can be returned.
- * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but
- * never LOCKED, so we don't need to test 'failed' directly.
- */
- for (i=disks; i--; )
- if (sh->dev[i].written) {
- dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) &&
- test_bit(R5_UPTODATE, &dev->flags) ) {
- /* We can return any write requests */
- struct bio *wbi, *wbi2;
- int bitmap_end = 0;
- PRINTK("Return write for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
- wbi = dev->written;
- dev->written = NULL;
- while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- wbi2 = r5_next_bio(wbi, dev->sector);
- if (--wbi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- wbi->bi_next = return_bi;
- return_bi = wbi;
- }
- wbi = wbi2;
- }
- if (dev->towrite == NULL)
- bitmap_end = 1;
- spin_unlock_irq(&conf->device_lock);
- if (bitmap_end)
- bitmap_endwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS,
- !test_bit(STRIPE_DEGRADED, &sh->state), 0);
- }
- }
- }
+ if ( s.written &&
+ ((test_bit(R5_Insync, &dev->flags) &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ test_bit(R5_UPTODATE, &dev->flags)) ||
+ (s.failed == 1 && s.failed_num == sh->pd_idx)))
+ handle_completed_write_requests(conf, sh, disks, &return_bi);
/* Now we might consider reading some blocks, either to check/generate
* parity, or to satisfy requests
* or to load a block that is being partially written.
*/
- if (to_read || non_overwrite || (syncing && (uptodate < disks)) || expanding) {
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- (dev->toread ||
- (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
- syncing ||
- expanding ||
- (failed && (sh->dev[failed_num].toread ||
- (sh->dev[failed_num].towrite && !test_bit(R5_OVERWRITE, &sh->dev[failed_num].flags))))
- )
- ) {
- /* we would like to get this block, possibly
- * by computing it, but we might not be able to
- */
- if (uptodate == disks-1) {
- PRINTK("Computing block %d\n", i);
- compute_block(sh, i);
- uptodate++;
- } else if (test_bit(R5_Insync, &dev->flags)) {
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- locked++;
- PRINTK("Reading block %d (sync=%d)\n",
- i, syncing);
- }
- }
- }
- set_bit(STRIPE_HANDLE, &sh->state);
+ if (s.to_read || s.non_overwrite ||
+ (s.syncing && (s.uptodate + s.compute < disks)) || s.expanding ||
+ test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending))
+ handle_issuing_new_read_requests5(sh, &s, disks);
+
+ /* Now we check to see if any write operations have recently
+ * completed
+ */
+
+ /* leave prexor set until postxor is done, allows us to distinguish
+ * a rmw from a rcw during biodrain
+ */
+ if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) &&
+ test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) {
+
+ clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete);
+ clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack);
+ clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
+
+ for (i = disks; i--; )
+ clear_bit(R5_Wantprexor, &sh->dev[i].flags);
}
- /* now to consider writing and what else, if anything should be read */
- if (to_write) {
- int rmw=0, rcw=0;
- for (i=disks ; i--;) {
- /* would I have to read this buffer for read_modify_write */
+ /* if only POSTXOR is set then this is an 'expand' postxor */
+ if (test_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete) &&
+ test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) {
+
+ clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete);
+ clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.ack);
+ clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending);
+
+ clear_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
+ clear_bit(STRIPE_OP_POSTXOR, &sh->ops.ack);
+ clear_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
+
+ /* All the 'written' buffers and the parity block are ready to
+ * be written back to disk
+ */
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
+ for (i = disks; i--; ) {
dev = &sh->dev[i];
- if ((dev->towrite || i == sh->pd_idx) &&
- (!test_bit(R5_LOCKED, &dev->flags)
- ) &&
- !test_bit(R5_UPTODATE, &dev->flags)) {
- if (test_bit(R5_Insync, &dev->flags)
-/* && !(!mddev->insync && i == sh->pd_idx) */
- )
- rmw++;
- else rmw += 2*disks; /* cannot read it */
- }
- /* Would I have to read this buffer for reconstruct_write */
- if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx &&
- (!test_bit(R5_LOCKED, &dev->flags)
- ) &&
- !test_bit(R5_UPTODATE, &dev->flags)) {
- if (test_bit(R5_Insync, &dev->flags)) rcw++;
- else rcw += 2*disks;
+ if (test_bit(R5_LOCKED, &dev->flags) &&
+ (i == sh->pd_idx || dev->written)) {
+ pr_debug("Writing block %d\n", i);
+ set_bit(R5_Wantwrite, &dev->flags);
+ if (!test_and_set_bit(
+ STRIPE_OP_IO, &sh->ops.pending))
+ sh->ops.count++;
+ if (!test_bit(R5_Insync, &dev->flags) ||
+ (i == sh->pd_idx && s.failed == 0))
+ set_bit(STRIPE_INSYNC, &sh->state);
}
}
- PRINTK("for sector %llu, rmw=%d rcw=%d\n",
- (unsigned long long)sh->sector, rmw, rcw);
- set_bit(STRIPE_HANDLE, &sh->state);
- if (rmw < rcw && rmw > 0)
- /* prefer read-modify-write, but need to get some data */
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if ((dev->towrite || i == sh->pd_idx) &&
- !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- test_bit(R5_Insync, &dev->flags)) {
- if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- {
- PRINTK("Read_old block %d for r-m-w\n", i);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- locked++;
- } else {
- set_bit(STRIPE_DELAYED, &sh->state);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
- }
- if (rcw <= rmw && rcw > 0)
- /* want reconstruct write, but need to get some data */
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx &&
- !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- test_bit(R5_Insync, &dev->flags)) {
- if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- {
- PRINTK("Read_old block %d for Reconstruct\n", i);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- locked++;
- } else {
- set_bit(STRIPE_DELAYED, &sh->state);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
- }
- /* now if nothing is locked, and if we have enough data, we can start a write request */
- if (locked == 0 && (rcw == 0 ||rmw == 0) &&
- !test_bit(STRIPE_BIT_DELAY, &sh->state)) {
- PRINTK("Computing parity...\n");
- compute_parity5(sh, rcw==0 ? RECONSTRUCT_WRITE : READ_MODIFY_WRITE);
- /* now every locked buffer is ready to be written */
- for (i=disks; i--;)
- if (test_bit(R5_LOCKED, &sh->dev[i].flags)) {
- PRINTK("Writing block %d\n", i);
- locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
- if (!test_bit(R5_Insync, &sh->dev[i].flags)
- || (i==sh->pd_idx && failed == 0))
- set_bit(STRIPE_INSYNC, &sh->state);
- }
- if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- atomic_dec(&conf->preread_active_stripes);
- if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
- md_wakeup_thread(conf->mddev->thread);
- }
+ if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ atomic_dec(&conf->preread_active_stripes);
+ if (atomic_read(&conf->preread_active_stripes) <
+ IO_THRESHOLD)
+ md_wakeup_thread(conf->mddev->thread);
}
}
- /* maybe we need to check and possibly fix the parity for this stripe
- * Any reads will already have been scheduled, so we just see if enough data
- * is available
+ /* Now to consider new write requests and what else, if anything
+ * should be read. We do not handle new writes when:
+ * 1/ A 'write' operation (copy+xor) is already in flight.
+ * 2/ A 'check' operation is in flight, as it may clobber the parity
+ * block.
*/
- if (syncing && locked == 0 &&
- !test_bit(STRIPE_INSYNC, &sh->state)) {
- set_bit(STRIPE_HANDLE, &sh->state);
- if (failed == 0) {
- BUG_ON(uptodate != disks);
- compute_parity5(sh, CHECK_PARITY);
- uptodate--;
- if (page_is_zero(sh->dev[sh->pd_idx].page)) {
- /* parity is correct (on disc, not in buffer any more) */
- set_bit(STRIPE_INSYNC, &sh->state);
- } else {
- conf->mddev->resync_mismatches += STRIPE_SECTORS;
- if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
- /* don't try to repair!! */
- set_bit(STRIPE_INSYNC, &sh->state);
- else {
- compute_block(sh, sh->pd_idx);
- uptodate++;
- }
- }
- }
- if (!test_bit(STRIPE_INSYNC, &sh->state)) {
- /* either failed parity check, or recovery is happening */
- if (failed==0)
- failed_num = sh->pd_idx;
- dev = &sh->dev[failed_num];
- BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
- BUG_ON(uptodate != disks);
+ if (s.to_write && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending) &&
+ !test_bit(STRIPE_OP_CHECK, &sh->ops.pending))
+ handle_issuing_new_write_requests5(conf, sh, &s, disks);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- clear_bit(STRIPE_DEGRADED, &sh->state);
- locked++;
- set_bit(STRIPE_INSYNC, &sh->state);
- }
- }
- if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
+ /* maybe we need to check and possibly fix the parity for this stripe
+ * Any reads will already have been scheduled, so we just see if enough
+ * data is available. The parity check is held off while parity
+ * dependent operations are in flight.
+ */
+ if ((s.syncing && s.locked == 0 &&
+ !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending) &&
+ !test_bit(STRIPE_INSYNC, &sh->state)) ||
+ test_bit(STRIPE_OP_CHECK, &sh->ops.pending) ||
+ test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending))
+ handle_parity_checks5(conf, sh, &s, disks);
+
+ if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS,1);
clear_bit(STRIPE_SYNCING, &sh->state);
}
@@ -1729,186 +2807,102 @@ static void handle_stripe5(struct stripe_head *sh)
/* If the failed drive is just a ReadError, then we might need to progress
* the repair/check process
*/
- if (failed == 1 && ! conf->mddev->ro &&
- test_bit(R5_ReadError, &sh->dev[failed_num].flags)
- && !test_bit(R5_LOCKED, &sh->dev[failed_num].flags)
- && test_bit(R5_UPTODATE, &sh->dev[failed_num].flags)
+ if (s.failed == 1 && !conf->mddev->ro &&
+ test_bit(R5_ReadError, &sh->dev[s.failed_num].flags)
+ && !test_bit(R5_LOCKED, &sh->dev[s.failed_num].flags)
+ && test_bit(R5_UPTODATE, &sh->dev[s.failed_num].flags)
) {
- dev = &sh->dev[failed_num];
+ dev = &sh->dev[s.failed_num];
if (!test_bit(R5_ReWrite, &dev->flags)) {
set_bit(R5_Wantwrite, &dev->flags);
+ if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
+ sh->ops.count++;
set_bit(R5_ReWrite, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
- locked++;
+ s.locked++;
} else {
/* let's read it back */
set_bit(R5_Wantread, &dev->flags);
+ if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
+ sh->ops.count++;
set_bit(R5_LOCKED, &dev->flags);
- locked++;
+ s.locked++;
}
}
- if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
- /* Need to write out all blocks after computing parity */
- sh->disks = conf->raid_disks;
- sh->pd_idx = stripe_to_pdidx(sh->sector, conf, conf->raid_disks);
- compute_parity5(sh, RECONSTRUCT_WRITE);
- for (i= conf->raid_disks; i--;) {
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- locked++;
+ /* Finish postxor operations initiated by the expansion
+ * process
+ */
+ if (test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete) &&
+ !test_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending)) {
+
+ clear_bit(STRIPE_EXPANDING, &sh->state);
+
+ clear_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
+ clear_bit(STRIPE_OP_POSTXOR, &sh->ops.ack);
+ clear_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
+
+ for (i = conf->raid_disks; i--; ) {
set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
+ sh->ops.count++;
}
- clear_bit(STRIPE_EXPANDING, &sh->state);
- } else if (expanded) {
+ }
+
+ if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
+ !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
+ /* Need to write out all blocks after computing parity */
+ sh->disks = conf->raid_disks;
+ sh->pd_idx = stripe_to_pdidx(sh->sector, conf,
+ conf->raid_disks);
+ s.locked += handle_write_operations5(sh, 0, 1);
+ } else if (s.expanded &&
+ !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
wake_up(&conf->wait_for_overlap);
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
}
- if (expanding && locked == 0) {
- /* We have read all the blocks in this stripe and now we need to
- * copy some of them into a target stripe for expand.
- */
- clear_bit(STRIPE_EXPAND_SOURCE, &sh->state);
- for (i=0; i< sh->disks; i++)
- if (i != sh->pd_idx) {
- int dd_idx, pd_idx, j;
- struct stripe_head *sh2;
-
- sector_t bn = compute_blocknr(sh, i);
- sector_t s = raid5_compute_sector(bn, conf->raid_disks,
- conf->raid_disks-1,
- &dd_idx, &pd_idx, conf);
- sh2 = get_active_stripe(conf, s, conf->raid_disks, pd_idx, 1);
- if (sh2 == NULL)
- /* so far only the early blocks of this stripe
- * have been requested. When later blocks
- * get requested, we will try again
- */
- continue;
- if(!test_bit(STRIPE_EXPANDING, &sh2->state) ||
- test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) {
- /* must have already done this block */
- release_stripe(sh2);
- continue;
- }
- memcpy(page_address(sh2->dev[dd_idx].page),
- page_address(sh->dev[i].page),
- STRIPE_SIZE);
- set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
- set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
- for (j=0; j<conf->raid_disks; j++)
- if (j != sh2->pd_idx &&
- !test_bit(R5_Expanded, &sh2->dev[j].flags))
- break;
- if (j == conf->raid_disks) {
- set_bit(STRIPE_EXPAND_READY, &sh2->state);
- set_bit(STRIPE_HANDLE, &sh2->state);
- }
- release_stripe(sh2);
- }
- }
+ if (s.expanding && s.locked == 0)
+ handle_stripe_expansion(conf, sh, NULL);
+
+ if (sh->ops.count)
+ pending = get_stripe_work(sh);
spin_unlock(&sh->lock);
- while ((bi=return_bi)) {
- int bytes = bi->bi_size;
+ if (pending)
+ raid5_run_ops(sh, pending);
- return_bi = bi->bi_next;
- bi->bi_next = NULL;
- bi->bi_size = 0;
- bi->bi_end_io(bi, bytes,
- test_bit(BIO_UPTODATE, &bi->bi_flags)
- ? 0 : -EIO);
- }
- for (i=disks; i-- ;) {
- int rw;
- struct bio *bi;
- mdk_rdev_t *rdev;
- if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
- rw = WRITE;
- else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
- rw = READ;
- else
- continue;
-
- bi = &sh->dev[i].req;
-
- bi->bi_rw = rw;
- if (rw == WRITE)
- bi->bi_end_io = raid5_end_write_request;
- else
- bi->bi_end_io = raid5_end_read_request;
-
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(Faulty, &rdev->flags))
- rdev = NULL;
- if (rdev)
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
-
- if (rdev) {
- if (syncing || expanding || expanded)
- md_sync_acct(rdev->bdev, STRIPE_SECTORS);
+ return_io(return_bi);
- bi->bi_bdev = rdev->bdev;
- PRINTK("for %llu schedule op %ld on disc %d\n",
- (unsigned long long)sh->sector, bi->bi_rw, i);
- atomic_inc(&sh->count);
- bi->bi_sector = sh->sector + rdev->data_offset;
- bi->bi_flags = 1 << BIO_UPTODATE;
- bi->bi_vcnt = 1;
- bi->bi_max_vecs = 1;
- bi->bi_idx = 0;
- bi->bi_io_vec = &sh->dev[i].vec;
- bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
- bi->bi_io_vec[0].bv_offset = 0;
- bi->bi_size = STRIPE_SIZE;
- bi->bi_next = NULL;
- if (rw == WRITE &&
- test_bit(R5_ReWrite, &sh->dev[i].flags))
- atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
- generic_make_request(bi);
- } else {
- if (rw == WRITE)
- set_bit(STRIPE_DEGRADED, &sh->state);
- PRINTK("skip op %ld on disc %d for sector %llu\n",
- bi->bi_rw, i, (unsigned long long)sh->sector);
- clear_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
}
static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
{
raid6_conf_t *conf = sh->raid_conf;
int disks = sh->disks;
- struct bio *return_bi= NULL;
- struct bio *bi;
- int i;
- int syncing, expanding, expanded;
- int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0;
- int non_overwrite = 0;
- int failed_num[2] = {0, 0};
+ struct bio *return_bi = NULL;
+ int i, pd_idx = sh->pd_idx;
+ struct stripe_head_state s;
+ struct r6_state r6s;
struct r5dev *dev, *pdev, *qdev;
- int pd_idx = sh->pd_idx;
- int qd_idx = raid6_next_disk(pd_idx, disks);
- int p_failed, q_failed;
- PRINTK("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d, qd_idx=%d\n",
- (unsigned long long)sh->sector, sh->state, atomic_read(&sh->count),
- pd_idx, qd_idx);
+ r6s.qd_idx = raid6_next_disk(pd_idx, disks);
+ pr_debug("handling stripe %llu, state=%#lx cnt=%d, "
+ "pd_idx=%d, qd_idx=%d\n",
+ (unsigned long long)sh->sector, sh->state,
+ atomic_read(&sh->count), pd_idx, r6s.qd_idx);
+ memset(&s, 0, sizeof(s));
spin_lock(&sh->lock);
clear_bit(STRIPE_HANDLE, &sh->state);
clear_bit(STRIPE_DELAYED, &sh->state);
- syncing = test_bit(STRIPE_SYNCING, &sh->state);
- expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
- expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
+ s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
+ s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
/* Now to look around and see what can be done */
rcu_read_lock();
@@ -1917,12 +2911,12 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
- PRINTK("check %d: state 0x%lx read %p write %p written %p\n",
+ pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
i, dev->flags, dev->toread, dev->towrite, dev->written);
/* maybe we can reply to a read */
if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
struct bio *rbi, *rbi2;
- PRINTK("Return read for disc %d\n", i);
+ pr_debug("Return read for disc %d\n", i);
spin_lock_irq(&conf->device_lock);
rbi = dev->toread;
dev->toread = NULL;
@@ -1943,17 +2937,19 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
}
/* now count some things */
- if (test_bit(R5_LOCKED, &dev->flags)) locked++;
- if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++;
+ if (test_bit(R5_LOCKED, &dev->flags)) s.locked++;
+ if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++;
- if (dev->toread) to_read++;
+ if (dev->toread)
+ s.to_read++;
if (dev->towrite) {
- to_write++;
+ s.to_write++;
if (!test_bit(R5_OVERWRITE, &dev->flags))
- non_overwrite++;
+ s.non_overwrite++;
}
- if (dev->written) written++;
+ if (dev->written)
+ s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
@@ -1962,96 +2958,27 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
}
if (!rdev || !test_bit(In_sync, &rdev->flags)
|| test_bit(R5_ReadError, &dev->flags)) {
- if ( failed < 2 )
- failed_num[failed] = i;
- failed++;
+ if (s.failed < 2)
+ r6s.failed_num[s.failed] = i;
+ s.failed++;
} else
set_bit(R5_Insync, &dev->flags);
}
rcu_read_unlock();
- PRINTK("locked=%d uptodate=%d to_read=%d"
+ pr_debug("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d,%d\n",
- locked, uptodate, to_read, to_write, failed,
- failed_num[0], failed_num[1]);
- /* check if the array has lost >2 devices and, if so, some requests might
- * need to be failed
+ s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
+ r6s.failed_num[0], r6s.failed_num[1]);
+ /* check if the array has lost >2 devices and, if so, some requests
+ * might need to be failed
*/
- if (failed > 2 && to_read+to_write+written) {
- for (i=disks; i--; ) {
- int bitmap_end = 0;
-
- if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
- mdk_rdev_t *rdev;
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(In_sync, &rdev->flags))
- /* multiple read failures in one stripe */
- md_error(conf->mddev, rdev);
- rcu_read_unlock();
- }
-
- spin_lock_irq(&conf->device_lock);
- /* fail all writes first */
- bi = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
- if (bi) { to_write--; bitmap_end = 1; }
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){
- struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = nextbi;
- }
- /* and fail all 'written' */
- bi = sh->dev[i].written;
- sh->dev[i].written = NULL;
- if (bi) bitmap_end = 1;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) {
- struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = bi2;
- }
-
- /* fail any reads if this device is non-operational */
- if (!test_bit(R5_Insync, &sh->dev[i].flags) ||
- test_bit(R5_ReadError, &sh->dev[i].flags)) {
- bi = sh->dev[i].toread;
- sh->dev[i].toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
- if (bi) to_read--;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){
- struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = nextbi;
- }
- }
- spin_unlock_irq(&conf->device_lock);
- if (bitmap_end)
- bitmap_endwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS, 0, 0);
- }
- }
- if (failed > 2 && syncing) {
+ if (s.failed > 2 && s.to_read+s.to_write+s.written)
+ handle_requests_to_failed_array(conf, sh, &s, disks,
+ &return_bi);
+ if (s.failed > 2 && s.syncing) {
md_done_sync(conf->mddev, STRIPE_SECTORS,0);
clear_bit(STRIPE_SYNCING, &sh->state);
- syncing = 0;
+ s.syncing = 0;
}
/*
@@ -2059,279 +2986,41 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
* are safe, or on a failed drive
*/
pdev = &sh->dev[pd_idx];
- p_failed = (failed >= 1 && failed_num[0] == pd_idx)
- || (failed >= 2 && failed_num[1] == pd_idx);
- qdev = &sh->dev[qd_idx];
- q_failed = (failed >= 1 && failed_num[0] == qd_idx)
- || (failed >= 2 && failed_num[1] == qd_idx);
-
- if ( written &&
- ( p_failed || ((test_bit(R5_Insync, &pdev->flags)
+ r6s.p_failed = (s.failed >= 1 && r6s.failed_num[0] == pd_idx)
+ || (s.failed >= 2 && r6s.failed_num[1] == pd_idx);
+ qdev = &sh->dev[r6s.qd_idx];
+ r6s.q_failed = (s.failed >= 1 && r6s.failed_num[0] == r6s.qd_idx)
+ || (s.failed >= 2 && r6s.failed_num[1] == r6s.qd_idx);
+
+ if ( s.written &&
+ ( r6s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
&& !test_bit(R5_LOCKED, &pdev->flags)
- && test_bit(R5_UPTODATE, &pdev->flags))) ) &&
- ( q_failed || ((test_bit(R5_Insync, &qdev->flags)
+ && test_bit(R5_UPTODATE, &pdev->flags)))) &&
+ ( r6s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
&& !test_bit(R5_LOCKED, &qdev->flags)
- && test_bit(R5_UPTODATE, &qdev->flags))) ) ) {
- /* any written block on an uptodate or failed drive can be
- * returned. Note that if we 'wrote' to a failed drive,
- * it will be UPTODATE, but never LOCKED, so we don't need
- * to test 'failed' directly.
- */
- for (i=disks; i--; )
- if (sh->dev[i].written) {
- dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) &&
- test_bit(R5_UPTODATE, &dev->flags) ) {
- /* We can return any write requests */
- int bitmap_end = 0;
- struct bio *wbi, *wbi2;
- PRINTK("Return write for stripe %llu disc %d\n",
- (unsigned long long)sh->sector, i);
- spin_lock_irq(&conf->device_lock);
- wbi = dev->written;
- dev->written = NULL;
- while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- wbi2 = r5_next_bio(wbi, dev->sector);
- if (--wbi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- wbi->bi_next = return_bi;
- return_bi = wbi;
- }
- wbi = wbi2;
- }
- if (dev->towrite == NULL)
- bitmap_end = 1;
- spin_unlock_irq(&conf->device_lock);
- if (bitmap_end)
- bitmap_endwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS,
- !test_bit(STRIPE_DEGRADED, &sh->state), 0);
- }
- }
- }
+ && test_bit(R5_UPTODATE, &qdev->flags)))))
+ handle_completed_write_requests(conf, sh, disks, &return_bi);
/* Now we might consider reading some blocks, either to check/generate
* parity, or to satisfy requests
* or to load a block that is being partially written.
*/
- if (to_read || non_overwrite || (to_write && failed) ||
- (syncing && (uptodate < disks)) || expanding) {
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- (dev->toread ||
- (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
- syncing ||
- expanding ||
- (failed >= 1 && (sh->dev[failed_num[0]].toread || to_write)) ||
- (failed >= 2 && (sh->dev[failed_num[1]].toread || to_write))
- )
- ) {
- /* we would like to get this block, possibly
- * by computing it, but we might not be able to
- */
- if (uptodate == disks-1) {
- PRINTK("Computing stripe %llu block %d\n",
- (unsigned long long)sh->sector, i);
- compute_block_1(sh, i, 0);
- uptodate++;
- } else if ( uptodate == disks-2 && failed >= 2 ) {
- /* Computing 2-failure is *very* expensive; only do it if failed >= 2 */
- int other;
- for (other=disks; other--;) {
- if ( other == i )
- continue;
- if ( !test_bit(R5_UPTODATE, &sh->dev[other].flags) )
- break;
- }
- BUG_ON(other < 0);
- PRINTK("Computing stripe %llu blocks %d,%d\n",
- (unsigned long long)sh->sector, i, other);
- compute_block_2(sh, i, other);
- uptodate += 2;
- } else if (test_bit(R5_Insync, &dev->flags)) {
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- locked++;
- PRINTK("Reading block %d (sync=%d)\n",
- i, syncing);
- }
- }
- }
- set_bit(STRIPE_HANDLE, &sh->state);
- }
+ if (s.to_read || s.non_overwrite || (s.to_write && s.failed) ||
+ (s.syncing && (s.uptodate < disks)) || s.expanding)
+ handle_issuing_new_read_requests6(sh, &s, &r6s, disks);
/* now to consider writing and what else, if anything should be read */
- if (to_write) {
- int rcw=0, must_compute=0;
- for (i=disks ; i--;) {
- dev = &sh->dev[i];
- /* Would I have to read this buffer for reconstruct_write */
- if (!test_bit(R5_OVERWRITE, &dev->flags)
- && i != pd_idx && i != qd_idx
- && (!test_bit(R5_LOCKED, &dev->flags)
- ) &&
- !test_bit(R5_UPTODATE, &dev->flags)) {
- if (test_bit(R5_Insync, &dev->flags)) rcw++;
- else {
- PRINTK("raid6: must_compute: disk %d flags=%#lx\n", i, dev->flags);
- must_compute++;
- }
- }
- }
- PRINTK("for sector %llu, rcw=%d, must_compute=%d\n",
- (unsigned long long)sh->sector, rcw, must_compute);
- set_bit(STRIPE_HANDLE, &sh->state);
-
- if (rcw > 0)
- /* want reconstruct write, but need to get some data */
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if (!test_bit(R5_OVERWRITE, &dev->flags)
- && !(failed == 0 && (i == pd_idx || i == qd_idx))
- && !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- test_bit(R5_Insync, &dev->flags)) {
- if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- {
- PRINTK("Read_old stripe %llu block %d for Reconstruct\n",
- (unsigned long long)sh->sector, i);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- locked++;
- } else {
- PRINTK("Request delayed stripe %llu block %d for Reconstruct\n",
- (unsigned long long)sh->sector, i);
- set_bit(STRIPE_DELAYED, &sh->state);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
- }
- /* now if nothing is locked, and if we have enough data, we can start a write request */
- if (locked == 0 && rcw == 0 &&
- !test_bit(STRIPE_BIT_DELAY, &sh->state)) {
- if ( must_compute > 0 ) {
- /* We have failed blocks and need to compute them */
- switch ( failed ) {
- case 0: BUG();
- case 1: compute_block_1(sh, failed_num[0], 0); break;
- case 2: compute_block_2(sh, failed_num[0], failed_num[1]); break;
- default: BUG(); /* This request should have been failed? */
- }
- }
-
- PRINTK("Computing parity for stripe %llu\n", (unsigned long long)sh->sector);
- compute_parity6(sh, RECONSTRUCT_WRITE);
- /* now every locked buffer is ready to be written */
- for (i=disks; i--;)
- if (test_bit(R5_LOCKED, &sh->dev[i].flags)) {
- PRINTK("Writing stripe %llu block %d\n",
- (unsigned long long)sh->sector, i);
- locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
- }
- /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
- set_bit(STRIPE_INSYNC, &sh->state);
-
- if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- atomic_dec(&conf->preread_active_stripes);
- if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
- md_wakeup_thread(conf->mddev->thread);
- }
- }
- }
+ if (s.to_write)
+ handle_issuing_new_write_requests6(conf, sh, &s, &r6s, disks);
/* maybe we need to check and possibly fix the parity for this stripe
- * Any reads will already have been scheduled, so we just see if enough data
- * is available
+ * Any reads will already have been scheduled, so we just see if enough
+ * data is available
*/
- if (syncing && locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state)) {
- int update_p = 0, update_q = 0;
- struct r5dev *dev;
-
- set_bit(STRIPE_HANDLE, &sh->state);
-
- BUG_ON(failed>2);
- BUG_ON(uptodate < disks);
- /* Want to check and possibly repair P and Q.
- * However there could be one 'failed' device, in which
- * case we can only check one of them, possibly using the
- * other to generate missing data
- */
-
- /* If !tmp_page, we cannot do the calculations,
- * but as we have set STRIPE_HANDLE, we will soon be called
- * by stripe_handle with a tmp_page - just wait until then.
- */
- if (tmp_page) {
- if (failed == q_failed) {
- /* The only possible failed device holds 'Q', so it makes
- * sense to check P (If anything else were failed, we would
- * have used P to recreate it).
- */
- compute_block_1(sh, pd_idx, 1);
- if (!page_is_zero(sh->dev[pd_idx].page)) {
- compute_block_1(sh,pd_idx,0);
- update_p = 1;
- }
- }
- if (!q_failed && failed < 2) {
- /* q is not failed, and we didn't use it to generate
- * anything, so it makes sense to check it
- */
- memcpy(page_address(tmp_page),
- page_address(sh->dev[qd_idx].page),
- STRIPE_SIZE);
- compute_parity6(sh, UPDATE_PARITY);
- if (memcmp(page_address(tmp_page),
- page_address(sh->dev[qd_idx].page),
- STRIPE_SIZE)!= 0) {
- clear_bit(STRIPE_INSYNC, &sh->state);
- update_q = 1;
- }
- }
- if (update_p || update_q) {
- conf->mddev->resync_mismatches += STRIPE_SECTORS;
- if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
- /* don't try to repair!! */
- update_p = update_q = 0;
- }
-
- /* now write out any block on a failed drive,
- * or P or Q if they need it
- */
+ if (s.syncing && s.locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state))
+ handle_parity_checks6(conf, sh, &s, &r6s, tmp_page, disks);
- if (failed == 2) {
- dev = &sh->dev[failed_num[1]];
- locked++;
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- }
- if (failed >= 1) {
- dev = &sh->dev[failed_num[0]];
- locked++;
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- }
-
- if (update_p) {
- dev = &sh->dev[pd_idx];
- locked ++;
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- }
- if (update_q) {
- dev = &sh->dev[qd_idx];
- locked++;
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- }
- clear_bit(STRIPE_DEGRADED, &sh->state);
-
- set_bit(STRIPE_INSYNC, &sh->state);
- }
- }
-
- if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
+ if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS,1);
clear_bit(STRIPE_SYNCING, &sh->state);
}
@@ -2339,9 +3028,9 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
/* If the failed drives are just a ReadError, then we might need
* to progress the repair/check process
*/
- if (failed <= 2 && ! conf->mddev->ro)
- for (i=0; i<failed;i++) {
- dev = &sh->dev[failed_num[i]];
+ if (s.failed <= 2 && !conf->mddev->ro)
+ for (i = 0; i < s.failed; i++) {
+ dev = &sh->dev[r6s.failed_num[i]];
if (test_bit(R5_ReadError, &dev->flags)
&& !test_bit(R5_LOCKED, &dev->flags)
&& test_bit(R5_UPTODATE, &dev->flags)
@@ -2358,7 +3047,7 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
}
}
- if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
+ if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
/* Need to write out all blocks after computing P&Q */
sh->disks = conf->raid_disks;
sh->pd_idx = stripe_to_pdidx(sh->sector, conf,
@@ -2366,82 +3055,24 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
compute_parity6(sh, RECONSTRUCT_WRITE);
for (i = conf->raid_disks ; i-- ; ) {
set_bit(R5_LOCKED, &sh->dev[i].flags);
- locked++;
+ s.locked++;
set_bit(R5_Wantwrite, &sh->dev[i].flags);
}
clear_bit(STRIPE_EXPANDING, &sh->state);
- } else if (expanded) {
+ } else if (s.expanded) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
wake_up(&conf->wait_for_overlap);
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
}
- if (expanding && locked == 0) {
- /* We have read all the blocks in this stripe and now we need to
- * copy some of them into a target stripe for expand.
- */
- clear_bit(STRIPE_EXPAND_SOURCE, &sh->state);
- for (i = 0; i < sh->disks ; i++)
- if (i != pd_idx && i != qd_idx) {
- int dd_idx2, pd_idx2, j;
- struct stripe_head *sh2;
-
- sector_t bn = compute_blocknr(sh, i);
- sector_t s = raid5_compute_sector(
- bn, conf->raid_disks,
- conf->raid_disks - conf->max_degraded,
- &dd_idx2, &pd_idx2, conf);
- sh2 = get_active_stripe(conf, s,
- conf->raid_disks,
- pd_idx2, 1);
- if (sh2 == NULL)
- /* so for only the early blocks of
- * this stripe have been requests.
- * When later blocks get requests, we
- * will try again
- */
- continue;
- if (!test_bit(STRIPE_EXPANDING, &sh2->state) ||
- test_bit(R5_Expanded,
- &sh2->dev[dd_idx2].flags)) {
- /* must have already done this block */
- release_stripe(sh2);
- continue;
- }
- memcpy(page_address(sh2->dev[dd_idx2].page),
- page_address(sh->dev[i].page),
- STRIPE_SIZE);
- set_bit(R5_Expanded, &sh2->dev[dd_idx2].flags);
- set_bit(R5_UPTODATE, &sh2->dev[dd_idx2].flags);
- for (j = 0 ; j < conf->raid_disks ; j++)
- if (j != sh2->pd_idx &&
- j != raid6_next_disk(sh2->pd_idx,
- sh2->disks) &&
- !test_bit(R5_Expanded,
- &sh2->dev[j].flags))
- break;
- if (j == conf->raid_disks) {
- set_bit(STRIPE_EXPAND_READY,
- &sh2->state);
- set_bit(STRIPE_HANDLE, &sh2->state);
- }
- release_stripe(sh2);
- }
- }
+ if (s.expanding && s.locked == 0)
+ handle_stripe_expansion(conf, sh, &r6s);
spin_unlock(&sh->lock);
- while ((bi=return_bi)) {
- int bytes = bi->bi_size;
+ return_io(return_bi);
- return_bi = bi->bi_next;
- bi->bi_next = NULL;
- bi->bi_size = 0;
- bi->bi_end_io(bi, bytes,
- test_bit(BIO_UPTODATE, &bi->bi_flags)
- ? 0 : -EIO);
- }
for (i=disks; i-- ;) {
int rw;
struct bio *bi;
@@ -2470,11 +3101,11 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
rcu_read_unlock();
if (rdev) {
- if (syncing || expanding || expanded)
+ if (s.syncing || s.expanding || s.expanded)
md_sync_acct(rdev->bdev, STRIPE_SECTORS);
bi->bi_bdev = rdev->bdev;
- PRINTK("for %llu schedule op %ld on disc %d\n",
+ pr_debug("for %llu schedule op %ld on disc %d\n",
(unsigned long long)sh->sector, bi->bi_rw, i);
atomic_inc(&sh->count);
bi->bi_sector = sh->sector + rdev->data_offset;
@@ -2494,7 +3125,7 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
} else {
if (rw == WRITE)
set_bit(STRIPE_DEGRADED, &sh->state);
- PRINTK("skip op %ld on disc %d for sector %llu\n",
+ pr_debug("skip op %ld on disc %d for sector %llu\n",
bi->bi_rw, i, (unsigned long long)sh->sector);
clear_bit(R5_LOCKED, &sh->dev[i].flags);
set_bit(STRIPE_HANDLE, &sh->state);
@@ -2738,7 +3369,7 @@ static int raid5_align_endio(struct bio *bi, unsigned int bytes, int error)
}
- PRINTK("raid5_align_endio : io error...handing IO for a retry\n");
+ pr_debug("raid5_align_endio : io error...handing IO for a retry\n");
add_bio_to_retry(raid_bi, conf);
return 0;
@@ -2776,7 +3407,7 @@ static int chunk_aligned_read(request_queue_t *q, struct bio * raid_bio)
mdk_rdev_t *rdev;
if (!in_chunk_boundary(mddev, raid_bio)) {
- PRINTK("chunk_aligned_read : non aligned\n");
+ pr_debug("chunk_aligned_read : non aligned\n");
return 0;
}
/*
@@ -2900,7 +3531,7 @@ static int make_request(request_queue_t *q, struct bio * bi)
new_sector = raid5_compute_sector(logical_sector, disks, data_disks,
&dd_idx, &pd_idx, conf);
- PRINTK("raid5: make_request, sector %llu logical %llu\n",
+ pr_debug("raid5: make_request, sector %llu logical %llu\n",
(unsigned long long)new_sector,
(unsigned long long)logical_sector);
@@ -3273,7 +3904,7 @@ static void raid5d (mddev_t *mddev)
raid5_conf_t *conf = mddev_to_conf(mddev);
int handled;
- PRINTK("+++ raid5d active\n");
+ pr_debug("+++ raid5d active\n");
md_check_recovery(mddev);
@@ -3308,8 +3939,10 @@ static void raid5d (mddev_t *mddev)
handled++;
}
- if (list_empty(&conf->handle_list))
+ if (list_empty(&conf->handle_list)) {
+ async_tx_issue_pending_all();
break;
+ }
first = conf->handle_list.next;
sh = list_entry(first, struct stripe_head, lru);
@@ -3325,13 +3958,13 @@ static void raid5d (mddev_t *mddev)
spin_lock_irq(&conf->device_lock);
}
- PRINTK("%d stripes handled\n", handled);
+ pr_debug("%d stripes handled\n", handled);
spin_unlock_irq(&conf->device_lock);
unplug_slaves(mddev);
- PRINTK("--- raid5d inactive\n");
+ pr_debug("--- raid5d inactive\n");
}
static ssize_t
@@ -3507,7 +4140,7 @@ static int run(mddev_t *mddev)
atomic_set(&conf->preread_active_stripes, 0);
atomic_set(&conf->active_aligned_reads, 0);
- PRINTK("raid5: run(%s) called.\n", mdname(mddev));
+ pr_debug("raid5: run(%s) called.\n", mdname(mddev));
ITERATE_RDEV(mddev,rdev,tmp) {
raid_disk = rdev->raid_disk;
@@ -3690,7 +4323,7 @@ static int stop(mddev_t *mddev)
return 0;
}
-#if RAID5_DEBUG
+#ifdef DEBUG
static void print_sh (struct seq_file *seq, struct stripe_head *sh)
{
int i;
@@ -3737,7 +4370,7 @@ static void status (struct seq_file *seq, mddev_t *mddev)
conf->disks[i].rdev &&
test_bit(In_sync, &conf->disks[i].rdev->flags) ? "U" : "_");
seq_printf (seq, "]");
-#if RAID5_DEBUG
+#ifdef DEBUG
seq_printf (seq, "\n");
printall(seq, conf);
#endif
diff --git a/drivers/md/xor.c b/drivers/md/xor.c
deleted file mode 100644
index 324897c4be4e..000000000000
--- a/drivers/md/xor.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * xor.c : Multiple Devices driver for Linux
- *
- * Copyright (C) 1996, 1997, 1998, 1999, 2000,
- * Ingo Molnar, Matti Aarnio, Jakub Jelinek, Richard Henderson.
- *
- * Dispatch optimized RAID-5 checksumming functions.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define BH_TRACE 0
-#include <linux/module.h>
-#include <linux/raid/md.h>
-#include <linux/raid/xor.h>
-#include <asm/xor.h>
-
-/* The xor routines to use. */
-static struct xor_block_template *active_template;
-
-void
-xor_block(unsigned int count, unsigned int bytes, void **ptr)
-{
- unsigned long *p0, *p1, *p2, *p3, *p4;
-
- p0 = (unsigned long *) ptr[0];
- p1 = (unsigned long *) ptr[1];
- if (count == 2) {
- active_template->do_2(bytes, p0, p1);
- return;
- }
-
- p2 = (unsigned long *) ptr[2];
- if (count == 3) {
- active_template->do_3(bytes, p0, p1, p2);
- return;
- }
-
- p3 = (unsigned long *) ptr[3];
- if (count == 4) {
- active_template->do_4(bytes, p0, p1, p2, p3);
- return;
- }
-
- p4 = (unsigned long *) ptr[4];
- active_template->do_5(bytes, p0, p1, p2, p3, p4);
-}
-
-/* Set of all registered templates. */
-static struct xor_block_template *template_list;
-
-#define BENCH_SIZE (PAGE_SIZE)
-
-static void
-do_xor_speed(struct xor_block_template *tmpl, void *b1, void *b2)
-{
- int speed;
- unsigned long now;
- int i, count, max;
-
- tmpl->next = template_list;
- template_list = tmpl;
-
- /*
- * Count the number of XORs done during a whole jiffy, and use
- * this to calculate the speed of checksumming. We use a 2-page
- * allocation to have guaranteed color L1-cache layout.
- */
- max = 0;
- for (i = 0; i < 5; i++) {
- now = jiffies;
- count = 0;
- while (jiffies == now) {
- mb();
- tmpl->do_2(BENCH_SIZE, b1, b2);
- mb();
- count++;
- mb();
- }
- if (count > max)
- max = count;
- }
-
- speed = max * (HZ * BENCH_SIZE / 1024);
- tmpl->speed = speed;
-
- printk(" %-10s: %5d.%03d MB/sec\n", tmpl->name,
- speed / 1000, speed % 1000);
-}
-
-static int
-calibrate_xor_block(void)
-{
- void *b1, *b2;
- struct xor_block_template *f, *fastest;
-
- b1 = (void *) __get_free_pages(GFP_KERNEL, 2);
- if (! b1) {
- printk("raid5: Yikes! No memory available.\n");
- return -ENOMEM;
- }
- b2 = b1 + 2*PAGE_SIZE + BENCH_SIZE;
-
- /*
- * If this arch/cpu has a short-circuited selection, don't loop through all
- * the possible functions, just test the best one
- */
-
- fastest = NULL;
-
-#ifdef XOR_SELECT_TEMPLATE
- fastest = XOR_SELECT_TEMPLATE(fastest);
-#endif
-
-#define xor_speed(templ) do_xor_speed((templ), b1, b2)
-
- if (fastest) {
- printk(KERN_INFO "raid5: automatically using best checksumming function: %s\n",
- fastest->name);
- xor_speed(fastest);
- } else {
- printk(KERN_INFO "raid5: measuring checksumming speed\n");
- XOR_TRY_TEMPLATES;
- fastest = template_list;
- for (f = fastest; f; f = f->next)
- if (f->speed > fastest->speed)
- fastest = f;
- }
-
- printk("raid5: using function: %s (%d.%03d MB/sec)\n",
- fastest->name, fastest->speed / 1000, fastest->speed % 1000);
-
-#undef xor_speed
-
- free_pages((unsigned long)b1, 2);
-
- active_template = fastest;
- return 0;
-}
-
-static __exit void xor_exit(void) { }
-
-EXPORT_SYMBOL(xor_block);
-MODULE_LICENSE("GPL");
-
-module_init(calibrate_xor_block);
-module_exit(xor_exit);