diff options
Diffstat (limited to 'drivers/md/bcache/closure.h')
-rw-r--r-- | drivers/md/bcache/closure.h | 181 |
1 files changed, 21 insertions, 160 deletions
diff --git a/drivers/md/bcache/closure.h b/drivers/md/bcache/closure.h index ab011f03801f..9762f1be3304 100644 --- a/drivers/md/bcache/closure.h +++ b/drivers/md/bcache/closure.h @@ -155,21 +155,6 @@ * delayed_work embeds a work item and a timer_list. The important thing is, use * it exactly like you would a regular closure and closure_put() will magically * handle everything for you. - * - * We've got closures that embed timers, too. They're called, appropriately - * enough: - * struct closure_with_timer; - * - * This gives you access to closure_delay(). It takes a refcount for a specified - * number of jiffies - you could then call closure_sync() (for a slightly - * convoluted version of msleep()) or continue_at() - which gives you the same - * effect as using a delayed work item, except you can reuse the work_struct - * already embedded in struct closure. - * - * Lastly, there's struct closure_with_waitlist_and_timer. It does what you - * probably expect, if you happen to need the features of both. (You don't - * really want to know how all this is implemented, but if I've done my job - * right you shouldn't have to care). */ struct closure; @@ -182,16 +167,11 @@ struct closure_waitlist { enum closure_type { TYPE_closure = 0, TYPE_closure_with_waitlist = 1, - TYPE_closure_with_timer = 2, - TYPE_closure_with_waitlist_and_timer = 3, - MAX_CLOSURE_TYPE = 3, + MAX_CLOSURE_TYPE = 1, }; enum closure_state { /* - * CLOSURE_BLOCKING: Causes closure_wait_event() to block, instead of - * waiting asynchronously - * * CLOSURE_WAITING: Set iff the closure is on a waitlist. Must be set by * the thread that owns the closure, and cleared by the thread that's * waking up the closure. @@ -200,10 +180,6 @@ enum closure_state { * - indicates that cl->task is valid and closure_put() may wake it up. * Only set or cleared by the thread that owns the closure. * - * CLOSURE_TIMER: Analagous to CLOSURE_WAITING, indicates that a closure - * has an outstanding timer. Must be set by the thread that owns the - * closure, and cleared by the timer function when the timer goes off. - * * The rest are for debugging and don't affect behaviour: * * CLOSURE_RUNNING: Set when a closure is running (i.e. by @@ -218,19 +194,17 @@ enum closure_state { * closure with this flag set */ - CLOSURE_BITS_START = (1 << 19), - CLOSURE_DESTRUCTOR = (1 << 19), - CLOSURE_BLOCKING = (1 << 21), - CLOSURE_WAITING = (1 << 23), - CLOSURE_SLEEPING = (1 << 25), - CLOSURE_TIMER = (1 << 27), + CLOSURE_BITS_START = (1 << 23), + CLOSURE_DESTRUCTOR = (1 << 23), + CLOSURE_WAITING = (1 << 25), + CLOSURE_SLEEPING = (1 << 27), CLOSURE_RUNNING = (1 << 29), CLOSURE_STACK = (1 << 31), }; #define CLOSURE_GUARD_MASK \ - ((CLOSURE_DESTRUCTOR|CLOSURE_BLOCKING|CLOSURE_WAITING| \ - CLOSURE_SLEEPING|CLOSURE_TIMER|CLOSURE_RUNNING|CLOSURE_STACK) << 1) + ((CLOSURE_DESTRUCTOR|CLOSURE_WAITING|CLOSURE_SLEEPING| \ + CLOSURE_RUNNING|CLOSURE_STACK) << 1) #define CLOSURE_REMAINING_MASK (CLOSURE_BITS_START - 1) #define CLOSURE_REMAINING_INITIALIZER (1|CLOSURE_RUNNING) @@ -268,17 +242,6 @@ struct closure_with_waitlist { struct closure_waitlist wait; }; -struct closure_with_timer { - struct closure cl; - struct timer_list timer; -}; - -struct closure_with_waitlist_and_timer { - struct closure cl; - struct closure_waitlist wait; - struct timer_list timer; -}; - extern unsigned invalid_closure_type(void); #define __CLOSURE_TYPE(cl, _t) \ @@ -289,14 +252,11 @@ extern unsigned invalid_closure_type(void); ( \ __CLOSURE_TYPE(cl, closure) \ __CLOSURE_TYPE(cl, closure_with_waitlist) \ - __CLOSURE_TYPE(cl, closure_with_timer) \ - __CLOSURE_TYPE(cl, closure_with_waitlist_and_timer) \ invalid_closure_type() \ ) void closure_sub(struct closure *cl, int v); void closure_put(struct closure *cl); -void closure_queue(struct closure *cl); void __closure_wake_up(struct closure_waitlist *list); bool closure_wait(struct closure_waitlist *list, struct closure *cl); void closure_sync(struct closure *cl); @@ -305,12 +265,6 @@ bool closure_trylock(struct closure *cl, struct closure *parent); void __closure_lock(struct closure *cl, struct closure *parent, struct closure_waitlist *wait_list); -void do_closure_timer_init(struct closure *cl); -bool __closure_delay(struct closure *cl, unsigned long delay, - struct timer_list *timer); -void __closure_flush(struct closure *cl, struct timer_list *timer); -void __closure_flush_sync(struct closure *cl, struct timer_list *timer); - #ifdef CONFIG_BCACHE_CLOSURES_DEBUG void closure_debug_init(void); @@ -354,11 +308,6 @@ static inline void closure_set_stopped(struct closure *cl) atomic_sub(CLOSURE_RUNNING, &cl->remaining); } -static inline bool closure_is_stopped(struct closure *cl) -{ - return !(atomic_read(&cl->remaining) & CLOSURE_RUNNING); -} - static inline bool closure_is_unlocked(struct closure *cl) { return atomic_read(&cl->remaining) == -1; @@ -367,14 +316,6 @@ static inline bool closure_is_unlocked(struct closure *cl) static inline void do_closure_init(struct closure *cl, struct closure *parent, bool running) { - switch (cl->type) { - case TYPE_closure_with_timer: - case TYPE_closure_with_waitlist_and_timer: - do_closure_timer_init(cl); - default: - break; - } - cl->parent = parent; if (parent) closure_get(parent); @@ -429,8 +370,7 @@ do { \ static inline void closure_init_stack(struct closure *cl) { memset(cl, 0, sizeof(struct closure)); - atomic_set(&cl->remaining, CLOSURE_REMAINING_INITIALIZER| - CLOSURE_BLOCKING|CLOSURE_STACK); + atomic_set(&cl->remaining, CLOSURE_REMAINING_INITIALIZER|CLOSURE_STACK); } /** @@ -461,24 +401,6 @@ do { \ #define closure_lock(cl, parent) \ __closure_lock(__to_internal_closure(cl), parent, &(cl)->wait) -/** - * closure_delay() - delay some number of jiffies - * @cl: the closure that will sleep - * @delay: the delay in jiffies - * - * Takes a refcount on @cl which will be released after @delay jiffies; this may - * be used to have a function run after a delay with continue_at(), or - * closure_sync() may be used for a convoluted version of msleep(). - */ -#define closure_delay(cl, delay) \ - __closure_delay(__to_internal_closure(cl), delay, &(cl)->timer) - -#define closure_flush(cl) \ - __closure_flush(__to_internal_closure(cl), &(cl)->timer) - -#define closure_flush_sync(cl) \ - __closure_flush_sync(__to_internal_closure(cl), &(cl)->timer) - static inline void __closure_end_sleep(struct closure *cl) { __set_current_state(TASK_RUNNING); @@ -498,40 +420,6 @@ static inline void __closure_start_sleep(struct closure *cl) } /** - * closure_blocking() - returns true if the closure is in blocking mode. - * - * If a closure is in blocking mode, closure_wait_event() will sleep until the - * condition is true instead of waiting asynchronously. - */ -static inline bool closure_blocking(struct closure *cl) -{ - return atomic_read(&cl->remaining) & CLOSURE_BLOCKING; -} - -/** - * set_closure_blocking() - put a closure in blocking mode. - * - * If a closure is in blocking mode, closure_wait_event() will sleep until the - * condition is true instead of waiting asynchronously. - * - * Not thread safe - can only be called by the thread running the closure. - */ -static inline void set_closure_blocking(struct closure *cl) -{ - if (!closure_blocking(cl)) - atomic_add(CLOSURE_BLOCKING, &cl->remaining); -} - -/* - * Not thread safe - can only be called by the thread running the closure. - */ -static inline void clear_closure_blocking(struct closure *cl) -{ - if (closure_blocking(cl)) - atomic_sub(CLOSURE_BLOCKING, &cl->remaining); -} - -/** * closure_wake_up() - wake up all closures on a wait list. */ static inline void closure_wake_up(struct closure_waitlist *list) @@ -561,63 +449,36 @@ static inline void closure_wake_up(struct closure_waitlist *list) * refcount on our closure. If this was a stack allocated closure, that would be * bad. */ -#define __closure_wait_event(list, cl, condition, _block) \ +#define closure_wait_event(list, cl, condition) \ ({ \ - bool block = _block; \ typeof(condition) ret; \ \ while (1) { \ ret = (condition); \ if (ret) { \ __closure_wake_up(list); \ - if (block) \ - closure_sync(cl); \ - \ + closure_sync(cl); \ break; \ } \ \ - if (block) \ - __closure_start_sleep(cl); \ - \ - if (!closure_wait(list, cl)) { \ - if (!block) \ - break; \ + __closure_start_sleep(cl); \ \ + if (!closure_wait(list, cl)) \ schedule(); \ - } \ } \ \ ret; \ }) -/** - * closure_wait_event() - wait on a condition, synchronously or asynchronously. - * @list: the wait list to wait on - * @cl: the closure that is doing the waiting - * @condition: a C expression for the event to wait for - * - * If the closure is in blocking mode, sleeps until the @condition evaluates to - * true - exactly like wait_event(). - * - * If the closure is not in blocking mode, waits asynchronously; if the - * condition is currently false the @cl is put onto @list and returns. @list - * owns a refcount on @cl; closure_sync() or continue_at() may be used later to - * wait for another thread to wake up @list, which drops the refcount on @cl. - * - * Returns the value of @condition; @cl will be on @list iff @condition was - * false. - * - * closure_wake_up(@list) must be called after changing any variable that could - * cause @condition to become true. - */ -#define closure_wait_event(list, cl, condition) \ - __closure_wait_event(list, cl, condition, closure_blocking(cl)) - -#define closure_wait_event_async(list, cl, condition) \ - __closure_wait_event(list, cl, condition, false) - -#define closure_wait_event_sync(list, cl, condition) \ - __closure_wait_event(list, cl, condition, true) +static inline void closure_queue(struct closure *cl) +{ + struct workqueue_struct *wq = cl->wq; + if (wq) { + INIT_WORK(&cl->work, cl->work.func); + BUG_ON(!queue_work(wq, &cl->work)); + } else + cl->fn(cl); +} static inline void set_closure_fn(struct closure *cl, closure_fn *fn, struct workqueue_struct *wq) |