diff options
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 608 |
1 files changed, 494 insertions, 114 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 0403102e807e..02c75ea385e0 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -29,33 +29,6 @@ #include <linux/of.h> #include <asm/unaligned.h> -struct goodix_ts_data; - -struct goodix_chip_data { - u16 config_addr; - int config_len; - int (*check_config)(struct goodix_ts_data *, const struct firmware *); -}; - -struct goodix_ts_data { - struct i2c_client *client; - struct input_dev *input_dev; - const struct goodix_chip_data *chip; - struct touchscreen_properties prop; - unsigned int max_touch_num; - unsigned int int_trigger_type; - struct regulator *avdd28; - struct regulator *vddio; - struct gpio_desc *gpiod_int; - struct gpio_desc *gpiod_rst; - u16 id; - u16 version; - const char *cfg_name; - struct completion firmware_loading_complete; - unsigned long irq_flags; - unsigned int contact_size; -}; - #define GOODIX_GPIO_INT_NAME "irq" #define GOODIX_GPIO_RST_NAME "reset" @@ -65,10 +38,13 @@ struct goodix_ts_data { #define GOODIX_CONTACT_SIZE 8 #define GOODIX_MAX_CONTACT_SIZE 9 #define GOODIX_MAX_CONTACTS 10 +#define GOODIX_MAX_KEYS 7 -#define GOODIX_CONFIG_MAX_LENGTH 240 +#define GOODIX_CONFIG_MIN_LENGTH 186 #define GOODIX_CONFIG_911_LENGTH 186 #define GOODIX_CONFIG_967_LENGTH 228 +#define GOODIX_CONFIG_GT9X_LENGTH 240 +#define GOODIX_CONFIG_MAX_LENGTH 240 /* Register defines */ #define GOODIX_REG_COMMAND 0x8040 @@ -80,39 +56,118 @@ struct goodix_ts_data { #define GOODIX_REG_ID 0x8140 #define GOODIX_BUFFER_STATUS_READY BIT(7) +#define GOODIX_HAVE_KEY BIT(4) #define GOODIX_BUFFER_STATUS_TIMEOUT 20 #define RESOLUTION_LOC 1 #define MAX_CONTACTS_LOC 5 #define TRIGGER_LOC 6 +/* Our special handling for GPIO accesses through ACPI is x86 specific */ +#if defined CONFIG_X86 && defined CONFIG_ACPI +#define ACPI_GPIO_SUPPORT +#endif + +struct goodix_ts_data; + +enum goodix_irq_pin_access_method { + IRQ_PIN_ACCESS_NONE, + IRQ_PIN_ACCESS_GPIO, + IRQ_PIN_ACCESS_ACPI_GPIO, + IRQ_PIN_ACCESS_ACPI_METHOD, +}; + +struct goodix_chip_data { + u16 config_addr; + int config_len; + int (*check_config)(struct goodix_ts_data *ts, const u8 *cfg, int len); + void (*calc_config_checksum)(struct goodix_ts_data *ts); +}; + +struct goodix_chip_id { + const char *id; + const struct goodix_chip_data *data; +}; + +#define GOODIX_ID_MAX_LEN 4 + +struct goodix_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + const struct goodix_chip_data *chip; + struct touchscreen_properties prop; + unsigned int max_touch_num; + unsigned int int_trigger_type; + struct regulator *avdd28; + struct regulator *vddio; + struct gpio_desc *gpiod_int; + struct gpio_desc *gpiod_rst; + int gpio_count; + int gpio_int_idx; + char id[GOODIX_ID_MAX_LEN + 1]; + u16 version; + const char *cfg_name; + bool reset_controller_at_probe; + bool load_cfg_from_disk; + struct completion firmware_loading_complete; + unsigned long irq_flags; + enum goodix_irq_pin_access_method irq_pin_access_method; + unsigned int contact_size; + u8 config[GOODIX_CONFIG_MAX_LENGTH]; + unsigned short keymap[GOODIX_MAX_KEYS]; +}; + static int goodix_check_cfg_8(struct goodix_ts_data *ts, - const struct firmware *cfg); + const u8 *cfg, int len); static int goodix_check_cfg_16(struct goodix_ts_data *ts, - const struct firmware *cfg); + const u8 *cfg, int len); +static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts); +static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts); static const struct goodix_chip_data gt1x_chip_data = { .config_addr = GOODIX_GT1X_REG_CONFIG_DATA, - .config_len = GOODIX_CONFIG_MAX_LENGTH, + .config_len = GOODIX_CONFIG_GT9X_LENGTH, .check_config = goodix_check_cfg_16, + .calc_config_checksum = goodix_calc_cfg_checksum_16, }; static const struct goodix_chip_data gt911_chip_data = { .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, .config_len = GOODIX_CONFIG_911_LENGTH, .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, }; static const struct goodix_chip_data gt967_chip_data = { .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, .config_len = GOODIX_CONFIG_967_LENGTH, .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, }; static const struct goodix_chip_data gt9x_chip_data = { .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, - .config_len = GOODIX_CONFIG_MAX_LENGTH, + .config_len = GOODIX_CONFIG_GT9X_LENGTH, .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, +}; + +static const struct goodix_chip_id goodix_chip_ids[] = { + { .id = "1151", .data = >1x_chip_data }, + { .id = "5663", .data = >1x_chip_data }, + { .id = "5688", .data = >1x_chip_data }, + { .id = "917S", .data = >1x_chip_data }, + + { .id = "911", .data = >911_chip_data }, + { .id = "9271", .data = >911_chip_data }, + { .id = "9110", .data = >911_chip_data }, + { .id = "927", .data = >911_chip_data }, + { .id = "928", .data = >911_chip_data }, + + { .id = "912", .data = >967_chip_data }, + { .id = "9147", .data = >967_chip_data }, + { .id = "967", .data = >967_chip_data }, + { } }; static const unsigned long goodix_irq_flags[] = { @@ -168,6 +223,22 @@ static const struct dmi_system_id nine_bytes_report[] = { {} }; +/* + * Those tablets have their x coordinate inverted + */ +static const struct dmi_system_id inverted_x_screen[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + .ident = "Cube I15-TC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Cube"), + DMI_MATCH(DMI_PRODUCT_NAME, "I15-TC") + }, + }, +#endif + {} +}; + /** * goodix_i2c_read - read data from a register of the i2c slave device. * @@ -235,28 +306,16 @@ static int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value) return goodix_i2c_write(client, reg, &value, sizeof(value)); } -static const struct goodix_chip_data *goodix_get_chip_data(u16 id) +static const struct goodix_chip_data *goodix_get_chip_data(const char *id) { - switch (id) { - case 1151: - case 5663: - case 5688: - return >1x_chip_data; - - case 911: - case 9271: - case 9110: - case 927: - case 928: - return >911_chip_data; - - case 912: - case 967: - return >967_chip_data; + unsigned int i; - default: - return >9x_chip_data; + for (i = 0; goodix_chip_ids[i].id; i++) { + if (!strcmp(goodix_chip_ids[i].id, id)) + return goodix_chip_ids[i].data; } + + return >9x_chip_data; } static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) @@ -264,6 +323,13 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) unsigned long max_timeout; int touch_num; int error; + u16 addr = GOODIX_READ_COOR_ADDR; + /* + * We are going to read 1-byte header, + * ts->contact_size * max(1, touch_num) bytes of coordinates + * and 1-byte footer which contains the touch-key code. + */ + const int header_contact_keycode_size = 1 + ts->contact_size + 1; /* * The 'buffer status' bit, which indicates that the data is valid, is @@ -272,8 +338,8 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) */ max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT); do { - error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, - data, ts->contact_size + 1); + error = goodix_i2c_read(ts->client, addr, data, + header_contact_keycode_size); if (error) { dev_err(&ts->client->dev, "I2C transfer error: %d\n", error); @@ -286,11 +352,10 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) return -EPROTO; if (touch_num > 1) { - data += 1 + ts->contact_size; + addr += header_contact_keycode_size; + data += header_contact_keycode_size; error = goodix_i2c_read(ts->client, - GOODIX_READ_COOR_ADDR + - 1 + ts->contact_size, - data, + addr, data, ts->contact_size * (touch_num - 1)); if (error) @@ -307,7 +372,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) * The Goodix panel will send spurious interrupts after a * 'finger up' event, which will always cause a timeout. */ - return 0; + return -ENOMSG; } static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data) @@ -340,6 +405,25 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data) input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w); } +static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data) +{ + int touch_num; + u8 key_value; + int i; + + if (data[0] & GOODIX_HAVE_KEY) { + touch_num = data[0] & 0x0f; + key_value = data[1 + ts->contact_size * touch_num]; + for (i = 0; i < GOODIX_MAX_KEYS; i++) + if (key_value & BIT(i)) + input_report_key(ts->input_dev, + ts->keymap[i], 1); + } else { + for (i = 0; i < GOODIX_MAX_KEYS; i++) + input_report_key(ts->input_dev, ts->keymap[i], 0); + } +} + /** * goodix_process_events - Process incoming events * @@ -350,7 +434,7 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data) */ static void goodix_process_events(struct goodix_ts_data *ts) { - u8 point_data[1 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; + u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; int touch_num; int i; @@ -358,11 +442,7 @@ static void goodix_process_events(struct goodix_ts_data *ts) if (touch_num < 0) return; - /* - * Bit 4 of the first byte reports the status of the capacitive - * Windows/Home button. - */ - input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4)); + goodix_ts_report_key(ts, point_data); for (i = 0; i < touch_num; i++) if (ts->contact_size == 9) @@ -406,22 +486,21 @@ static int goodix_request_irq(struct goodix_ts_data *ts) ts->irq_flags, ts->client->name, ts); } -static int goodix_check_cfg_8(struct goodix_ts_data *ts, - const struct firmware *cfg) +static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len) { - int i, raw_cfg_len = cfg->size - 2; + int i, raw_cfg_len = len - 2; u8 check_sum = 0; for (i = 0; i < raw_cfg_len; i++) - check_sum += cfg->data[i]; + check_sum += cfg[i]; check_sum = (~check_sum) + 1; - if (check_sum != cfg->data[raw_cfg_len]) { + if (check_sum != cfg[raw_cfg_len]) { dev_err(&ts->client->dev, "The checksum of the config fw is not correct"); return -EINVAL; } - if (cfg->data[raw_cfg_len + 1] != 1) { + if (cfg[raw_cfg_len + 1] != 1) { dev_err(&ts->client->dev, "Config fw must have Config_Fresh register set"); return -EINVAL; @@ -430,22 +509,35 @@ static int goodix_check_cfg_8(struct goodix_ts_data *ts, return 0; } -static int goodix_check_cfg_16(struct goodix_ts_data *ts, - const struct firmware *cfg) +static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts) { - int i, raw_cfg_len = cfg->size - 3; + int i, raw_cfg_len = ts->chip->config_len - 2; + u8 check_sum = 0; + + for (i = 0; i < raw_cfg_len; i++) + check_sum += ts->config[i]; + check_sum = (~check_sum) + 1; + + ts->config[raw_cfg_len] = check_sum; + ts->config[raw_cfg_len + 1] = 1; /* Set "config_fresh" bit */ +} + +static int goodix_check_cfg_16(struct goodix_ts_data *ts, const u8 *cfg, + int len) +{ + int i, raw_cfg_len = len - 3; u16 check_sum = 0; for (i = 0; i < raw_cfg_len; i += 2) - check_sum += get_unaligned_be16(&cfg->data[i]); + check_sum += get_unaligned_be16(&cfg[i]); check_sum = (~check_sum) + 1; - if (check_sum != get_unaligned_be16(&cfg->data[raw_cfg_len])) { + if (check_sum != get_unaligned_be16(&cfg[raw_cfg_len])) { dev_err(&ts->client->dev, "The checksum of the config fw is not correct"); return -EINVAL; } - if (cfg->data[raw_cfg_len + 2] != 1) { + if (cfg[raw_cfg_len + 2] != 1) { dev_err(&ts->client->dev, "Config fw must have Config_Fresh register set"); return -EINVAL; @@ -454,22 +546,35 @@ static int goodix_check_cfg_16(struct goodix_ts_data *ts, return 0; } +static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts) +{ + int i, raw_cfg_len = ts->chip->config_len - 3; + u16 check_sum = 0; + + for (i = 0; i < raw_cfg_len; i += 2) + check_sum += get_unaligned_be16(&ts->config[i]); + check_sum = (~check_sum) + 1; + + put_unaligned_be16(check_sum, &ts->config[raw_cfg_len]); + ts->config[raw_cfg_len + 2] = 1; /* Set "config_fresh" bit */ +} + /** * goodix_check_cfg - Checks if config fw is valid * * @ts: goodix_ts_data pointer * @cfg: firmware config data */ -static int goodix_check_cfg(struct goodix_ts_data *ts, - const struct firmware *cfg) +static int goodix_check_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len) { - if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) { + if (len < GOODIX_CONFIG_MIN_LENGTH || + len > GOODIX_CONFIG_MAX_LENGTH) { dev_err(&ts->client->dev, "The length of the config fw is not correct"); return -EINVAL; } - return ts->chip->check_config(ts, cfg); + return ts->chip->check_config(ts, cfg, len); } /** @@ -478,17 +583,15 @@ static int goodix_check_cfg(struct goodix_ts_data *ts, * @ts: goodix_ts_data pointer * @cfg: config firmware to write to device */ -static int goodix_send_cfg(struct goodix_ts_data *ts, - const struct firmware *cfg) +static int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len) { int error; - error = goodix_check_cfg(ts, cfg); + error = goodix_check_cfg(ts, cfg, len); if (error) return error; - error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg->data, - cfg->size); + error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg, len); if (error) { dev_err(&ts->client->dev, "Failed to write config data: %d", error); @@ -502,17 +605,93 @@ static int goodix_send_cfg(struct goodix_ts_data *ts, return 0; } +#ifdef ACPI_GPIO_SUPPORT +static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts) +{ + acpi_handle handle = ACPI_HANDLE(&ts->client->dev); + acpi_status status; + + status = acpi_evaluate_object(handle, "INTI", NULL, NULL); + return ACPI_SUCCESS(status) ? 0 : -EIO; +} + +static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value) +{ + acpi_handle handle = ACPI_HANDLE(&ts->client->dev); + acpi_status status; + + status = acpi_execute_simple_method(handle, "INTO", value); + return ACPI_SUCCESS(status) ? 0 : -EIO; +} +#else +static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts) +{ + dev_err(&ts->client->dev, + "%s called on device without ACPI support\n", __func__); + return -EINVAL; +} + +static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value) +{ + dev_err(&ts->client->dev, + "%s called on device without ACPI support\n", __func__); + return -EINVAL; +} +#endif + +static int goodix_irq_direction_output(struct goodix_ts_data *ts, int value) +{ + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_NONE: + dev_err(&ts->client->dev, + "%s called without an irq_pin_access_method set\n", + __func__); + return -EINVAL; + case IRQ_PIN_ACCESS_GPIO: + return gpiod_direction_output(ts->gpiod_int, value); + case IRQ_PIN_ACCESS_ACPI_GPIO: + /* + * The IRQ pin triggers on a falling edge, so its gets marked + * as active-low, use output_raw to avoid the value inversion. + */ + return gpiod_direction_output_raw(ts->gpiod_int, value); + case IRQ_PIN_ACCESS_ACPI_METHOD: + return goodix_pin_acpi_output_method(ts, value); + } + + return -EINVAL; /* Never reached */ +} + +static int goodix_irq_direction_input(struct goodix_ts_data *ts) +{ + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_NONE: + dev_err(&ts->client->dev, + "%s called without an irq_pin_access_method set\n", + __func__); + return -EINVAL; + case IRQ_PIN_ACCESS_GPIO: + return gpiod_direction_input(ts->gpiod_int); + case IRQ_PIN_ACCESS_ACPI_GPIO: + return gpiod_direction_input(ts->gpiod_int); + case IRQ_PIN_ACCESS_ACPI_METHOD: + return goodix_pin_acpi_direction_input(ts); + } + + return -EINVAL; /* Never reached */ +} + static int goodix_int_sync(struct goodix_ts_data *ts) { int error; - error = gpiod_direction_output(ts->gpiod_int, 0); + error = goodix_irq_direction_output(ts, 0); if (error) return error; msleep(50); /* T5: 50ms */ - error = gpiod_direction_input(ts->gpiod_int); + error = goodix_irq_direction_input(ts); if (error) return error; @@ -536,7 +715,7 @@ static int goodix_reset(struct goodix_ts_data *ts) msleep(20); /* T2: > 10ms */ /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */ - error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14); + error = goodix_irq_direction_output(ts, ts->client->addr == 0x14); if (error) return error; @@ -560,6 +739,124 @@ static int goodix_reset(struct goodix_ts_data *ts) return 0; } +#ifdef ACPI_GPIO_SUPPORT +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> + +static const struct x86_cpu_id baytrail_cpu_ids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, X86_FEATURE_ANY, }, + {} +}; + +static inline bool is_byt(void) +{ + const struct x86_cpu_id *id = x86_match_cpu(baytrail_cpu_ids); + + return !!id; +} + +static const struct acpi_gpio_params first_gpio = { 0, 0, false }; +static const struct acpi_gpio_params second_gpio = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_goodix_int_first_gpios[] = { + { GOODIX_GPIO_INT_NAME "-gpios", &first_gpio, 1 }, + { GOODIX_GPIO_RST_NAME "-gpios", &second_gpio, 1 }, + { }, +}; + +static const struct acpi_gpio_mapping acpi_goodix_int_last_gpios[] = { + { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 }, + { GOODIX_GPIO_INT_NAME "-gpios", &second_gpio, 1 }, + { }, +}; + +static const struct acpi_gpio_mapping acpi_goodix_reset_only_gpios[] = { + { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 }, + { }, +}; + +static int goodix_resource(struct acpi_resource *ares, void *data) +{ + struct goodix_ts_data *ts = data; + struct device *dev = &ts->client->dev; + struct acpi_resource_gpio *gpio; + + switch (ares->type) { + case ACPI_RESOURCE_TYPE_GPIO: + gpio = &ares->data.gpio; + if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) { + if (ts->gpio_int_idx == -1) { + ts->gpio_int_idx = ts->gpio_count; + } else { + dev_err(dev, "More then one GpioInt resource, ignoring ACPI GPIO resources\n"); + ts->gpio_int_idx = -2; + } + } + ts->gpio_count++; + break; + default: + break; + } + + return 0; +} + +/* + * This function gets called in case we fail to get the irq GPIO directly + * because the ACPI tables lack GPIO-name to APCI _CRS index mappings + * (no _DSD UUID daffd814-6eba-4d8c-8a91-bc9bbf4aa301 data). + * In that case we add our own mapping and then goodix_get_gpio_config() + * retries to get the GPIOs based on the added mapping. + */ +static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) +{ + const struct acpi_gpio_mapping *gpio_mapping = NULL; + struct device *dev = &ts->client->dev; + LIST_HEAD(resources); + int ret; + + ts->gpio_count = 0; + ts->gpio_int_idx = -1; + ret = acpi_dev_get_resources(ACPI_COMPANION(dev), &resources, + goodix_resource, ts); + if (ret < 0) { + dev_err(dev, "Error getting ACPI resources: %d\n", ret); + return ret; + } + + acpi_dev_free_resource_list(&resources); + + if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) { + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_first_gpios; + } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) { + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_last_gpios; + } else if (ts->gpio_count == 1 && ts->gpio_int_idx == -1 && + acpi_has_method(ACPI_HANDLE(dev), "INTI") && + acpi_has_method(ACPI_HANDLE(dev), "INTO")) { + dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n"); + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD; + gpio_mapping = acpi_goodix_reset_only_gpios; + } else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { + dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_last_gpios; + } else { + dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n", + ts->gpio_count, ts->gpio_int_idx); + return -EINVAL; + } + + return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping); +} +#else +static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) +{ + return -EINVAL; +} +#endif /* CONFIG_X86 && CONFIG_ACPI */ + /** * goodix_get_gpio_config - Get GPIO config from ACPI/DT * @@ -570,6 +867,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) int error; struct device *dev; struct gpio_desc *gpiod; + bool added_acpi_mappings = false; if (!ts->client) return -EINVAL; @@ -593,6 +891,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) return error; } +retry_get_irq_gpio: /* Get the interrupt GPIO pin number */ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); if (IS_ERR(gpiod)) { @@ -602,6 +901,11 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) GOODIX_GPIO_INT_NAME, error); return error; } + if (!gpiod && has_acpi_companion(dev) && !added_acpi_mappings) { + added_acpi_mappings = true; + if (goodix_add_acpi_gpio_mappings(ts) == 0) + goto retry_get_irq_gpio; + } ts->gpiod_int = gpiod; @@ -617,6 +921,31 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) ts->gpiod_rst = gpiod; + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_ACPI_GPIO: + /* + * We end up here if goodix_add_acpi_gpio_mappings() has + * called devm_acpi_dev_add_driver_gpios() because the ACPI + * tables did not contain name to index mappings. + * Check that we successfully got both GPIOs after we've + * added our own acpi_gpio_mapping and if we did not get both + * GPIOs reset irq_pin_access_method to IRQ_PIN_ACCESS_NONE. + */ + if (!ts->gpiod_int || !ts->gpiod_rst) + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + break; + case IRQ_PIN_ACCESS_ACPI_METHOD: + if (!ts->gpiod_rst) + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + break; + default: + if (ts->gpiod_int && ts->gpiod_rst) { + ts->reset_controller_at_probe = true; + ts->load_cfg_from_disk = true; + ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO; + } + } + return 0; } @@ -629,12 +958,11 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) */ static void goodix_read_config(struct goodix_ts_data *ts) { - u8 config[GOODIX_CONFIG_MAX_LENGTH]; int x_max, y_max; int error; error = goodix_i2c_read(ts->client, ts->chip->config_addr, - config, ts->chip->config_len); + ts->config, ts->chip->config_len); if (error) { dev_warn(&ts->client->dev, "Error reading config: %d\n", error); @@ -643,15 +971,17 @@ static void goodix_read_config(struct goodix_ts_data *ts) return; } - ts->int_trigger_type = config[TRIGGER_LOC] & 0x03; - ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f; + ts->int_trigger_type = ts->config[TRIGGER_LOC] & 0x03; + ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; - x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); - y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); + x_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC]); + y_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC + 2]); if (x_max && y_max) { input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1); input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1); } + + ts->chip->calc_config_checksum(ts); } /** @@ -663,7 +993,7 @@ static int goodix_read_version(struct goodix_ts_data *ts) { int error; u8 buf[6]; - char id_str[5]; + char id_str[GOODIX_ID_MAX_LEN + 1]; error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf)); if (error) { @@ -671,14 +1001,13 @@ static int goodix_read_version(struct goodix_ts_data *ts) return error; } - memcpy(id_str, buf, 4); - id_str[4] = 0; - if (kstrtou16(id_str, 10, &ts->id)) - ts->id = 0x1001; + memcpy(id_str, buf, GOODIX_ID_MAX_LEN); + id_str[GOODIX_ID_MAX_LEN] = 0; + strscpy(ts->id, id_str, GOODIX_ID_MAX_LEN + 1); ts->version = get_unaligned_le16(&buf[4]); - dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id, + dev_info(&ts->client->dev, "ID %s, version: %04x\n", ts->id, ts->version); return 0; @@ -722,6 +1051,7 @@ static int goodix_i2c_test(struct i2c_client *client) static int goodix_configure_dev(struct goodix_ts_data *ts) { int error; + int i; ts->int_trigger_type = GOODIX_INT_TRIGGER; ts->max_touch_num = GOODIX_MAX_CONTACTS; @@ -736,11 +1066,23 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) ts->input_dev->phys = "input/ts"; ts->input_dev->id.bustype = BUS_I2C; ts->input_dev->id.vendor = 0x0416; - ts->input_dev->id.product = ts->id; + if (kstrtou16(ts->id, 10, &ts->input_dev->id.product)) + ts->input_dev->id.product = 0x1001; ts->input_dev->id.version = ts->version; + ts->input_dev->keycode = ts->keymap; + ts->input_dev->keycodesize = sizeof(ts->keymap[0]); + ts->input_dev->keycodemax = GOODIX_MAX_KEYS; + /* Capacitive Windows/Home button on some devices */ - input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA); + for (i = 0; i < GOODIX_MAX_KEYS; ++i) { + if (i == 0) + ts->keymap[i] = KEY_LEFTMETA; + else + ts->keymap[i] = KEY_F1 + (i - 1); + + input_set_capability(ts->input_dev, EV_KEY, ts->keymap[i]); + } input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y); @@ -780,6 +1122,12 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) "Non-standard 9-bytes report format quirk\n"); } + if (dmi_check_system(inverted_x_screen)) { + ts->prop.invert_x = true; + dev_dbg(&ts->client->dev, + "Applying 'inverted x screen' quirk\n"); + } + error = input_mt_init_slots(ts->input_dev, ts->max_touch_num, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); if (error) { @@ -820,7 +1168,7 @@ static void goodix_config_cb(const struct firmware *cfg, void *ctx) if (cfg) { /* send device configuration to the firmware */ - error = goodix_send_cfg(ts, cfg); + error = goodix_send_cfg(ts, cfg->data, cfg->size); if (error) goto err_release_cfg; } @@ -889,7 +1237,8 @@ static int goodix_ts_probe(struct i2c_client *client, if (error) return error; - if (ts->gpiod_int && ts->gpiod_rst) { +reset: + if (ts->reset_controller_at_probe) { /* reset the controller */ error = goodix_reset(ts); if (error) { @@ -900,6 +1249,12 @@ static int goodix_ts_probe(struct i2c_client *client, error = goodix_i2c_test(client); if (error) { + if (!ts->reset_controller_at_probe && + ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) { + /* Retry after a controller reset */ + ts->reset_controller_at_probe = true; + goto reset; + } dev_err(&client->dev, "I2C communication failure: %d\n", error); return error; } @@ -912,10 +1267,10 @@ static int goodix_ts_probe(struct i2c_client *client, ts->chip = goodix_get_chip_data(ts->id); - if (ts->gpiod_int && ts->gpiod_rst) { + if (ts->load_cfg_from_disk) { /* update device config */ ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL, - "goodix_%d_cfg.bin", ts->id); + "goodix_%s_cfg.bin", ts->id); if (!ts->cfg_name) return -ENOMEM; @@ -943,7 +1298,7 @@ static int goodix_ts_remove(struct i2c_client *client) { struct goodix_ts_data *ts = i2c_get_clientdata(client); - if (ts->gpiod_int && ts->gpiod_rst) + if (ts->load_cfg_from_disk) wait_for_completion(&ts->firmware_loading_complete); return 0; @@ -955,19 +1310,20 @@ static int __maybe_unused goodix_suspend(struct device *dev) struct goodix_ts_data *ts = i2c_get_clientdata(client); int error; + if (ts->load_cfg_from_disk) + wait_for_completion(&ts->firmware_loading_complete); + /* We need gpio pins to suspend/resume */ - if (!ts->gpiod_int || !ts->gpiod_rst) { + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { disable_irq(client->irq); return 0; } - wait_for_completion(&ts->firmware_loading_complete); - /* Free IRQ as IRQ pin is used as output in the suspend sequence */ goodix_free_irq(ts); /* Output LOW on the INT pin for 5 ms */ - error = gpiod_direction_output(ts->gpiod_int, 0); + error = goodix_irq_direction_output(ts, 0); if (error) { goodix_request_irq(ts); return error; @@ -979,7 +1335,7 @@ static int __maybe_unused goodix_suspend(struct device *dev) GOODIX_CMD_SCREEN_OFF); if (error) { dev_err(&ts->client->dev, "Screen off command failed\n"); - gpiod_direction_input(ts->gpiod_int); + goodix_irq_direction_input(ts); goodix_request_irq(ts); return -EAGAIN; } @@ -997,9 +1353,10 @@ static int __maybe_unused goodix_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct goodix_ts_data *ts = i2c_get_clientdata(client); + u8 config_ver; int error; - if (!ts->gpiod_int || !ts->gpiod_rst) { + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { enable_irq(client->irq); return 0; } @@ -1008,7 +1365,7 @@ static int __maybe_unused goodix_resume(struct device *dev) * Exit sleep mode by outputting HIGH level to INT pin * for 2ms~5ms. */ - error = gpiod_direction_output(ts->gpiod_int, 1); + error = goodix_irq_direction_output(ts, 1); if (error) return error; @@ -1018,6 +1375,27 @@ static int __maybe_unused goodix_resume(struct device *dev) if (error) return error; + error = goodix_i2c_read(ts->client, ts->chip->config_addr, + &config_ver, 1); + if (error) + dev_warn(dev, "Error reading config version: %d, resetting controller\n", + error); + else if (config_ver != ts->config[0]) + dev_info(dev, "Config version mismatch %d != %d, resetting controller\n", + config_ver, ts->config[0]); + + if (error != 0 || config_ver != ts->config[0]) { + error = goodix_reset(ts); + if (error) { + dev_err(dev, "Controller reset failed.\n"); + return error; + } + + error = goodix_send_cfg(ts, ts->config, ts->chip->config_len); + if (error) + return error; + } + error = goodix_request_irq(ts); if (error) return error; @@ -1050,6 +1428,8 @@ static const struct of_device_id goodix_of_match[] = { { .compatible = "goodix,gt911" }, { .compatible = "goodix,gt9110" }, { .compatible = "goodix,gt912" }, + { .compatible = "goodix,gt9147" }, + { .compatible = "goodix,gt917s" }, { .compatible = "goodix,gt927" }, { .compatible = "goodix,gt9271" }, { .compatible = "goodix,gt928" }, |