diff options
Diffstat (limited to 'drivers/input/touchscreen/ads7846.c')
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 79 |
1 files changed, 47 insertions, 32 deletions
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index b45a45ca7cc9..72cf0a26d676 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -60,7 +60,7 @@ struct ts_event { }; struct ads7846 { - struct input_dev input; + struct input_dev *input; char phys[32]; struct spi_device *spi; @@ -152,7 +152,7 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) struct ser_req *req = kzalloc(sizeof *req, SLAB_KERNEL); int status; int sample; - int i; + int i; if (!req) return -ENOMEM; @@ -236,11 +236,12 @@ SHOW(vbatt) static void ads7846_rx(void *ads) { - struct ads7846 *ts = ads; - unsigned Rt; - unsigned sync = 0; - u16 x, y, z1, z2; - unsigned long flags; + struct ads7846 *ts = ads; + struct input_dev *input_dev = ts->input; + unsigned Rt; + unsigned sync = 0; + u16 x, y, z1, z2; + unsigned long flags; /* adjust: 12 bit samples (left aligned), built from * two 8 bit values writen msb-first. @@ -276,21 +277,21 @@ static void ads7846_rx(void *ads) * won't notice that, even if nPENIRQ never fires ... */ if (!ts->pendown && Rt != 0) { - input_report_key(&ts->input, BTN_TOUCH, 1); + input_report_key(input_dev, BTN_TOUCH, 1); sync = 1; } else if (ts->pendown && Rt == 0) { - input_report_key(&ts->input, BTN_TOUCH, 0); + input_report_key(input_dev, BTN_TOUCH, 0); sync = 1; } if (Rt) { - input_report_abs(&ts->input, ABS_X, x); - input_report_abs(&ts->input, ABS_Y, y); - input_report_abs(&ts->input, ABS_PRESSURE, Rt); + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, Rt); sync = 1; } if (sync) - input_sync(&ts->input); + input_sync(input_dev); #ifdef VERBOSE if (Rt || ts->pendown) @@ -396,9 +397,11 @@ static int ads7846_resume(struct spi_device *spi) static int __devinit ads7846_probe(struct spi_device *spi) { struct ads7846 *ts; + struct input_dev *input_dev; struct ads7846_platform_data *pdata = spi->dev.platform_data; struct spi_transfer *x; int i; + int err; if (!spi->irq) { dev_dbg(&spi->dev, "no IRQ?\n"); @@ -423,13 +426,18 @@ static int __devinit ads7846_probe(struct spi_device *spi) * to discard the four garbage LSBs. */ - if (!(ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL))) - return -ENOMEM; + ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } dev_set_drvdata(&spi->dev, ts); + spi->dev.power.power_state = PMSG_ON; ts->spi = spi; - spi->dev.power.power_state = PMSG_ON; + ts->input = input_dev; init_timer(&ts->timer); ts->timer.data = (unsigned long) ts; @@ -439,28 +447,25 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; - init_input_dev(&ts->input); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id); - ts->input.dev = &spi->dev; - ts->input.name = "ADS784x Touchscreen"; - snprintf(ts->phys, sizeof ts->phys, "%s/input0", spi->dev.bus_id); - ts->input.phys = ts->phys; + input_dev->name = "ADS784x Touchscreen"; + input_dev->phys = ts->phys; + input_dev->cdev.dev = &spi->dev; - ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - input_set_abs_params(&ts->input, ABS_X, + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, pdata->x_min ? : 0, pdata->x_max ? : MAX_12BIT, 0, 0); - input_set_abs_params(&ts->input, ABS_Y, + input_set_abs_params(input_dev, ABS_Y, pdata->y_min ? : 0, pdata->y_max ? : MAX_12BIT, 0, 0); - input_set_abs_params(&ts->input, ABS_PRESSURE, + input_set_abs_params(input_dev, ABS_PRESSURE, pdata->pressure_min, pdata->pressure_max, 0, 0); - input_register_device(&ts->input); - /* set up the transfers to read touchscreen state; this assumes we * use formula #2 for pressure, not #3. */ @@ -510,9 +515,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING, spi->dev.bus_id, ts)) { dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); - input_unregister_device(&ts->input); - kfree(ts); - return -EBUSY; + err = -EBUSY; + goto err_free_mem; } dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq); @@ -534,7 +538,18 @@ static int __devinit ads7846_probe(struct spi_device *spi) device_create_file(&spi->dev, &dev_attr_vbatt); device_create_file(&spi->dev, &dev_attr_vaux); + err = input_register_device(input_dev); + if (err) + goto err_free_irq; + return 0; + + err_free_irq: + free_irq(spi->irq, ts); + err_free_mem: + input_free_device(input_dev); + kfree(ts); + return err; } static int __devexit ads7846_remove(struct spi_device *spi) @@ -554,7 +569,7 @@ static int __devexit ads7846_remove(struct spi_device *spi) device_remove_file(&spi->dev, &dev_attr_vbatt); device_remove_file(&spi->dev, &dev_attr_vaux); - input_unregister_device(&ts->input); + input_unregister_device(ts->input); kfree(ts); dev_dbg(&spi->dev, "unregistered touchscreen\n"); |