1 files changed, 557 insertions, 0 deletions
diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c
new file mode 100644
index 000000000000..3c5eaaa5d154
--- /dev/null
+++ b/drivers/input/mouse/synaptics_usb.c
@@ -0,0 +1,557 @@
+/*
+ * USB Synaptics device driver
+ *
+ *  Copyright (c) 2002 Rob Miller (rob@inpharmatica . co . uk)
+ *  Copyright (c) 2003 Ron Lee (ron@debian.org)
+ *	cPad driver for kernel 2.4
+ *
+ *  Copyright (c) 2004 Jan Steinhoff (cpad@jan-steinhoff . de)
+ *  Copyright (c) 2004 Ron Lee (ron@debian.org)
+ *	rewritten for kernel 2.6
+ *
+ *  cPad display character device part is not included. It can be found at
+ *  http://jan-steinhoff.de/linux/synaptics-usb.html
+ *
+ * Bases on:	usb_skeleton.c v2.2 by Greg Kroah-Hartman
+ *		drivers/hid/usbhid/usbmouse.c by Vojtech Pavlik
+ *		drivers/input/mouse/synaptics.c by Peter Osterlund
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * Trademarks are the property of their respective owners.
+ */
+
+/*
+ * There are three different types of Synaptics USB devices: Touchpads,
+ * touchsticks (or trackpoints), and touchscreens. Touchpads are well supported
+ * by this driver, touchstick support has not been tested much yet, and
+ * touchscreens have not been tested at all.
+ *
+ * Up to three alternate settings are possible:
+ *	setting 0: one int endpoint for relative movement (used by usbhid.ko)
+ *	setting 1: one int endpoint for absolute finger position
+ *	setting 2 (cPad only): one int endpoint for absolute finger position and
+ *		   two bulk endpoints for the display (in/out)
+ * This driver uses setting 1.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <linux/usb/input.h>
+
+#define USB_VENDOR_ID_SYNAPTICS	0x06cb
+#define USB_DEVICE_ID_SYNAPTICS_TP	0x0001	/* Synaptics USB TouchPad */
+#define USB_DEVICE_ID_SYNAPTICS_INT_TP	0x0002	/* Integrated USB TouchPad */
+#define USB_DEVICE_ID_SYNAPTICS_CPAD	0x0003	/* Synaptics cPad */
+#define USB_DEVICE_ID_SYNAPTICS_TS	0x0006	/* Synaptics TouchScreen */
+#define USB_DEVICE_ID_SYNAPTICS_STICK	0x0007	/* Synaptics USB Styk */
+#define USB_DEVICE_ID_SYNAPTICS_WP	0x0008	/* Synaptics USB WheelPad */
+#define USB_DEVICE_ID_SYNAPTICS_COMP_TP	0x0009	/* Composite USB TouchPad */
+#define USB_DEVICE_ID_SYNAPTICS_WTP	0x0010	/* Wireless TouchPad */
+#define USB_DEVICE_ID_SYNAPTICS_DPAD	0x0013	/* DisplayPad */
+
+#define SYNUSB_TOUCHPAD			(1 << 0)
+#define SYNUSB_STICK			(1 << 1)
+#define SYNUSB_TOUCHSCREEN		(1 << 2)
+#define SYNUSB_AUXDISPLAY		(1 << 3) /* For cPad */
+#define SYNUSB_COMBO			(1 << 4) /* Composite device (TP + stick) */
+#define SYNUSB_IO_ALWAYS		(1 << 5)
+
+#define USB_DEVICE_SYNAPTICS(prod, kind)		\
+	USB_DEVICE(USB_VENDOR_ID_SYNAPTICS,		\
+		   USB_DEVICE_ID_SYNAPTICS_##prod),	\
+	.driver_info = (kind),
+
+#define SYNUSB_RECV_SIZE	8
+
+#define XMIN_NOMINAL		1472
+#define XMAX_NOMINAL		5472
+#define YMIN_NOMINAL		1408
+#define YMAX_NOMINAL		4448
+
+struct synusb {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	struct urb *urb;
+	unsigned char *data;
+
+	/* input device related data structures */
+	struct input_dev *input;
+	char name[128];
+	char phys[64];
+
+	/* characteristics of the device */
+	unsigned long flags;
+};
+
+static void synusb_report_buttons(struct synusb *synusb)
+{
+	struct input_dev *input_dev = synusb->input;
+
+	input_report_key(input_dev, BTN_LEFT, synusb->data[1] & 0x04);
+	input_report_key(input_dev, BTN_RIGHT, synusb->data[1] & 0x01);
+	input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x02);
+}
+
+static void synusb_report_stick(struct synusb *synusb)
+{
+	struct input_dev *input_dev = synusb->input;
+	int x, y;
+	unsigned int pressure;
+
+	pressure = synusb->data[6];
+	x = (s16)(be16_to_cpup((__be16 *)&synusb->data[2]) << 3) >> 7;
+	y = (s16)(be16_to_cpup((__be16 *)&synusb->data[4]) << 3) >> 7;
+
+	if (pressure > 0) {
+		input_report_rel(input_dev, REL_X, x);
+		input_report_rel(input_dev, REL_Y, -y);
+	}
+
+	input_report_abs(input_dev, ABS_PRESSURE, pressure);
+
+	synusb_report_buttons(synusb);
+
+	input_sync(input_dev);
+}
+
+static void synusb_report_touchpad(struct synusb *synusb)
+{
+	struct input_dev *input_dev = synusb->input;
+	unsigned int num_fingers, tool_width;
+	unsigned int x, y;
+	unsigned int pressure, w;
+
+	pressure = synusb->data[6];
+	x = be16_to_cpup((__be16 *)&synusb->data[2]);
+	y = be16_to_cpup((__be16 *)&synusb->data[4]);
+	w = synusb->data[0] & 0x0f;
+
+	if (pressure > 0) {
+		num_fingers = 1;
+		tool_width = 5;
+		switch (w) {
+		case 0 ... 1:
+			num_fingers = 2 + w;
+			break;
+
+		case 2:	                /* pen, pretend its a finger */
+			break;
+
+		case 4 ... 15:
+			tool_width = w;
+			break;
+		}
+	} else {
+		num_fingers = 0;
+		tool_width = 0;
+	}
+
+	/*
+	 * Post events
+	 * BTN_TOUCH has to be first as mousedev relies on it when doing
+	 * absolute -> relative conversion
+	 */
+
+	if (pressure > 30)
+		input_report_key(input_dev, BTN_TOUCH, 1);
+	if (pressure < 25)
+		input_report_key(input_dev, BTN_TOUCH, 0);
+
+	if (num_fingers > 0) {
+		input_report_abs(input_dev, ABS_X, x);
+		input_report_abs(input_dev, ABS_Y,
+				 YMAX_NOMINAL + YMIN_NOMINAL - y);
+	}
+
+	input_report_abs(input_dev, ABS_PRESSURE, pressure);
+	input_report_abs(input_dev, ABS_TOOL_WIDTH, tool_width);
+
+	input_report_key(input_dev, BTN_TOOL_FINGER, num_fingers == 1);
+	input_report_key(input_dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
+	input_report_key(input_dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
+
+	synusb_report_buttons(synusb);
+	if (synusb->flags & SYNUSB_AUXDISPLAY)
+		input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x08);
+
+	input_sync(input_dev);
+}
+
+static void synusb_irq(struct urb *urb)
+{
+	struct synusb *synusb = urb->context;
+	int error;
+
+	/* Check our status in case we need to bail out early. */
+	switch (urb->status) {
+	case 0:
+		usb_mark_last_busy(synusb->udev);
+		break;
+
+	/* Device went away so don't keep trying to read from it. */
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		goto resubmit;
+		break;
+	}
+
+	if (synusb->flags & SYNUSB_STICK)
+		synusb_report_stick(synusb);
+	else
+		synusb_report_touchpad(synusb);
+
+resubmit:
+	error = usb_submit_urb(urb, GFP_ATOMIC);
+	if (error && error != -EPERM)
+		dev_err(&synusb->intf->dev,
+			"%s - usb_submit_urb failed with result: %d",
+			__func__, error);
+}
+
+static struct usb_endpoint_descriptor *
+synusb_get_in_endpoint(struct usb_host_interface *iface)
+{
+
+	struct usb_endpoint_descriptor *endpoint;
+	int i;
+
+	for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+		endpoint = &iface->endpoint[i].desc;
+
+		if (usb_endpoint_is_int_in(endpoint)) {
+			/* we found our interrupt in endpoint */
+			return endpoint;
+		}
+	}
+
+	return NULL;
+}
+
+static int synusb_open(struct input_dev *dev)
+{
+	struct synusb *synusb = input_get_drvdata(dev);
+	int retval;
+
+	retval = usb_autopm_get_interface(synusb->intf);
+	if (retval) {
+		dev_err(&synusb->intf->dev,
+			"%s - usb_autopm_get_interface failed, error: %d\n",
+			__func__, retval);
+		return retval;
+	}
+
+	retval = usb_submit_urb(synusb->urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&synusb->intf->dev,
+			"%s - usb_submit_urb failed, error: %d\n",
+			__func__, retval);
+		retval = -EIO;
+		goto out;
+	}
+
+	synusb->intf->needs_remote_wakeup = 1;
+
+out:
+	usb_autopm_put_interface(synusb->intf);
+	return retval;
+}
+
+static void synusb_close(struct input_dev *dev)
+{
+	struct synusb *synusb = input_get_drvdata(dev);
+	int autopm_error;
+
+	autopm_error = usb_autopm_get_interface(synusb->intf);
+
+	usb_kill_urb(synusb->urb);
+	synusb->intf->needs_remote_wakeup = 0;
+
+	if (!autopm_error)
+		usb_autopm_put_interface(synusb->intf);
+}
+
+static int synusb_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *ep;
+	struct synusb *synusb;
+	struct input_dev *input_dev;
+	unsigned int intf_num = intf->cur_altsetting->desc.bInterfaceNumber;
+	unsigned int altsetting = min(intf->num_altsetting, 1U);
+	int error;
+
+	error = usb_set_interface(udev, intf_num, altsetting);
+	if (error) {
+		dev_err(&udev->dev,
+			"Can not set alternate setting to %i, error: %i",
+			altsetting, error);
+		return error;
+	}
+
+	ep = synusb_get_in_endpoint(intf->cur_altsetting);
+	if (!ep)
+		return -ENODEV;
+
+	synusb = kzalloc(sizeof(*synusb), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!synusb || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	synusb->udev = udev;
+	synusb->intf = intf;
+	synusb->input = input_dev;
+
+	synusb->flags = id->driver_info;
+	if (synusb->flags & SYNUSB_COMBO) {
+		/*
+		 * This is a combo device, we need to set proper
+		 * capability, depending on the interface.
+		 */
+		synusb->flags |= intf_num == 1 ?
+					SYNUSB_STICK : SYNUSB_TOUCHPAD;
+	}
+
+	synusb->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!synusb->urb) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	synusb->data = usb_alloc_coherent(udev, SYNUSB_RECV_SIZE, GFP_KERNEL,
+					  &synusb->urb->transfer_dma);
+	if (!synusb->data) {
+		error = -ENOMEM;
+		goto err_free_urb;
+	}
+
+	usb_fill_int_urb(synusb->urb, udev,
+			 usb_rcvintpipe(udev, ep->bEndpointAddress),
+			 synusb->data, SYNUSB_RECV_SIZE,
+			 synusb_irq, synusb,
+			 ep->bInterval);
+	synusb->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	if (udev->manufacturer)
+		strlcpy(synusb->name, udev->manufacturer,
+			sizeof(synusb->name));
+
+	if (udev->product) {
+		if (udev->manufacturer)
+			strlcat(synusb->name, " ", sizeof(synusb->name));
+		strlcat(synusb->name, udev->product, sizeof(synusb->name));
+	}
+
+	if (!strlen(synusb->name))
+		snprintf(synusb->name, sizeof(synusb->name),
+			 "USB Synaptics Device %04x:%04x",
+			 le16_to_cpu(udev->descriptor.idVendor),
+			 le16_to_cpu(udev->descriptor.idProduct));
+
+	if (synusb->flags & SYNUSB_STICK)
+		strlcat(synusb->name, " (Stick) ", sizeof(synusb->name));
+
+	usb_make_path(udev, synusb->phys, sizeof(synusb->phys));
+	strlcat(synusb->phys, "/input0", sizeof(synusb->phys));
+
+	input_dev->name = synusb->name;
+	input_dev->phys = synusb->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &synusb->intf->dev;
+
+	if (!(synusb->flags & SYNUSB_IO_ALWAYS)) {
+		input_dev->open = synusb_open;
+		input_dev->close = synusb_close;
+	}
+
+	input_set_drvdata(input_dev, synusb);
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	if (synusb->flags & SYNUSB_STICK) {
+		__set_bit(EV_REL, input_dev->evbit);
+		__set_bit(REL_X, input_dev->relbit);
+		__set_bit(REL_Y, input_dev->relbit);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 127, 0, 0);
+	} else {
+		input_set_abs_params(input_dev, ABS_X,
+				     XMIN_NOMINAL, XMAX_NOMINAL, 0, 0);
+		input_set_abs_params(input_dev, ABS_Y,
+				     YMIN_NOMINAL, YMAX_NOMINAL, 0, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+		input_set_abs_params(input_dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
+		__set_bit(BTN_TOUCH, input_dev->keybit);
+		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+		__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+		__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+	}
+
+	__set_bit(BTN_LEFT, input_dev->keybit);
+	__set_bit(BTN_RIGHT, input_dev->keybit);
+	__set_bit(BTN_MIDDLE, input_dev->keybit);
+
+	usb_set_intfdata(intf, synusb);
+
+	if (synusb->flags & SYNUSB_IO_ALWAYS) {
+		error = synusb_open(input_dev);
+		if (error)
+			goto err_free_dma;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&udev->dev,
+			"Failed to register input device, error %d\n",
+			error);
+		goto err_stop_io;
+	}
+
+	return 0;
+
+err_stop_io:
+	if (synusb->flags & SYNUSB_IO_ALWAYS)
+		synusb_close(synusb->input);
+err_free_dma:
+	usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data,
+			  synusb->urb->transfer_dma);
+err_free_urb:
+	usb_free_urb(synusb->urb);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(synusb);
+	usb_set_intfdata(intf, NULL);
+
+	return error;
+}
+
+static void synusb_disconnect(struct usb_interface *intf)
+{
+	struct synusb *synusb = usb_get_intfdata(intf);
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	if (synusb->flags & SYNUSB_IO_ALWAYS)
+		synusb_close(synusb->input);
+
+	input_unregister_device(synusb->input);
+
+	usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data,
+			  synusb->urb->transfer_dma);
+	usb_free_urb(synusb->urb);
+	kfree(synusb);
+
+	usb_set_intfdata(intf, NULL);
+}
+
+static int synusb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct synusb *synusb = usb_get_intfdata(intf);
+	struct input_dev *input_dev = synusb->input;
+
+	mutex_lock(&input_dev->mutex);
+	usb_kill_urb(synusb->urb);
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int synusb_resume(struct usb_interface *intf)
+{
+	struct synusb *synusb = usb_get_intfdata(intf);
+	struct input_dev *input_dev = synusb->input;
+	int retval = 0;
+
+	mutex_lock(&input_dev->mutex);
+
+	if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) &&
+	    usb_submit_urb(synusb->urb, GFP_NOIO) < 0) {
+		retval = -EIO;
+	}
+
+	mutex_unlock(&input_dev->mutex);
+
+	return retval;
+}
+
+static int synusb_pre_reset(struct usb_interface *intf)
+{
+	struct synusb *synusb = usb_get_intfdata(intf);
+	struct input_dev *input_dev = synusb->input;
+
+	mutex_lock(&input_dev->mutex);
+	usb_kill_urb(synusb->urb);
+
+	return 0;
+}
+
+static int synusb_post_reset(struct usb_interface *intf)
+{
+	struct synusb *synusb = usb_get_intfdata(intf);
+	struct input_dev *input_dev = synusb->input;
+	int retval = 0;
+
+	if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) &&
+	    usb_submit_urb(synusb->urb, GFP_NOIO) < 0) {
+		retval = -EIO;
+	}
+
+	mutex_unlock(&input_dev->mutex);
+
+	return retval;
+}
+
+static int synusb_reset_resume(struct usb_interface *intf)
+{
+	return synusb_resume(intf);
+}
+
+static struct usb_device_id synusb_idtable[] = {
+	{ USB_DEVICE_SYNAPTICS(TP, SYNUSB_TOUCHPAD) },
+	{ USB_DEVICE_SYNAPTICS(INT_TP, SYNUSB_TOUCHPAD) },
+	{ USB_DEVICE_SYNAPTICS(CPAD,
+		SYNUSB_TOUCHPAD | SYNUSB_AUXDISPLAY | SYNUSB_IO_ALWAYS) },
+	{ USB_DEVICE_SYNAPTICS(TS, SYNUSB_TOUCHSCREEN) },
+	{ USB_DEVICE_SYNAPTICS(STICK, SYNUSB_STICK) },
+	{ USB_DEVICE_SYNAPTICS(WP, SYNUSB_TOUCHPAD) },
+	{ USB_DEVICE_SYNAPTICS(COMP_TP, SYNUSB_COMBO) },
+	{ USB_DEVICE_SYNAPTICS(WTP, SYNUSB_TOUCHPAD) },
+	{ USB_DEVICE_SYNAPTICS(DPAD, SYNUSB_TOUCHPAD) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, synusb_idtable);
+
+static struct usb_driver synusb_driver = {
+	.name		= "synaptics_usb",
+	.probe		= synusb_probe,
+	.disconnect	= synusb_disconnect,
+	.id_table	= synusb_idtable,
+	.suspend	= synusb_suspend,
+	.resume		= synusb_resume,
+	.pre_reset	= synusb_pre_reset,
+	.post_reset	= synusb_post_reset,
+	.reset_resume	= synusb_reset_resume,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(synusb_driver);
+
+MODULE_AUTHOR("Rob Miller <rob@inpharmatica.co.uk>, "
+              "Ron Lee <ron@debian.org>, "
+              "Jan Steinhoff <cpad@jan-steinhoff.de>");
+MODULE_DESCRIPTION("Synaptics USB device driver");
+MODULE_LICENSE("GPL");