summaryrefslogtreecommitdiff
path: root/drivers/iio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/adc/mcp3422.c17
-rw-r--r--drivers/iio/adc/qcom-spmi-iadc.c3
-rw-r--r--drivers/iio/common/ssp_sensors/ssp_dev.c2
-rw-r--r--drivers/iio/dac/ad5686.c2
-rw-r--r--drivers/iio/humidity/dht11.c69
-rw-r--r--drivers/iio/humidity/si7020.c6
-rw-r--r--drivers/iio/imu/adis16400_core.c3
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c6
-rw-r--r--drivers/iio/light/Kconfig2
-rw-r--r--drivers/iio/magnetometer/Kconfig2
10 files changed, 64 insertions, 48 deletions
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 51672256072b..b96c636470ef 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -58,20 +58,11 @@
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
}
-/* LSB is in nV to eliminate floating point */
-static const u32 rates_to_lsb[] = {1000000, 250000, 62500, 15625};
-
-/*
- * scales calculated as:
- * rates_to_lsb[sample_rate] / (1 << pga);
- * pga is 1 for 0, 2
- */
-
static const int mcp3422_scales[4][4] = {
- { 1000000, 250000, 62500, 15625 },
- { 500000 , 125000, 31250, 7812 },
- { 250000 , 62500 , 15625, 3906 },
- { 125000 , 31250 , 7812 , 1953 } };
+ { 1000000, 500000, 250000, 125000 },
+ { 250000 , 125000, 62500 , 31250 },
+ { 62500 , 31250 , 15625 , 7812 },
+ { 15625 , 7812 , 3906 , 1953 } };
/* Constant msleep times for data acquisitions */
static const int mcp3422_read_times[4] = {
diff --git a/drivers/iio/adc/qcom-spmi-iadc.c b/drivers/iio/adc/qcom-spmi-iadc.c
index b9666f2f5e51..fabd24edc2a1 100644
--- a/drivers/iio/adc/qcom-spmi-iadc.c
+++ b/drivers/iio/adc/qcom-spmi-iadc.c
@@ -296,7 +296,8 @@ static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
if (iadc->poll_eoc) {
ret = iadc_poll_wait_eoc(iadc, wait);
} else {
- ret = wait_for_completion_timeout(&iadc->complete, wait);
+ ret = wait_for_completion_timeout(&iadc->complete,
+ usecs_to_jiffies(wait));
if (!ret)
ret = -ETIMEDOUT;
else
diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
index 52d70435f5a1..55a90082a29b 100644
--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -640,6 +640,7 @@ static int ssp_remove(struct spi_device *spi)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
static int ssp_suspend(struct device *dev)
{
int ret;
@@ -688,6 +689,7 @@ static int ssp_resume(struct device *dev)
return 0;
}
+#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops ssp_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ssp_suspend, ssp_resume)
diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index f57562aa396f..15c73e20272d 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -322,7 +322,7 @@ static int ad5686_probe(struct spi_device *spi)
st = iio_priv(indio_dev);
spi_set_drvdata(spi, indio_dev);
- st->reg = devm_regulator_get(&spi->dev, "vcc");
+ st->reg = devm_regulator_get_optional(&spi->dev, "vcc");
if (!IS_ERR(st->reg)) {
ret = regulator_enable(st->reg);
if (ret)
diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
index 623c145d8a97..7d79a1ac5f5f 100644
--- a/drivers/iio/humidity/dht11.c
+++ b/drivers/iio/humidity/dht11.c
@@ -29,6 +29,7 @@
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/completion.h>
+#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
@@ -39,8 +40,12 @@
#define DHT11_DATA_VALID_TIME 2000000000 /* 2s in ns */
-#define DHT11_EDGES_PREAMBLE 4
+#define DHT11_EDGES_PREAMBLE 2
#define DHT11_BITS_PER_READ 40
+/*
+ * Note that when reading the sensor actually 84 edges are detected, but
+ * since the last edge is not significant, we only store 83:
+ */
#define DHT11_EDGES_PER_READ (2*DHT11_BITS_PER_READ + DHT11_EDGES_PREAMBLE + 1)
/* Data transmission timing (nano seconds) */
@@ -57,6 +62,7 @@ struct dht11 {
int irq;
struct completion completion;
+ struct mutex lock;
s64 timestamp;
int temperature;
@@ -88,7 +94,7 @@ static int dht11_decode(struct dht11 *dht11, int offset)
unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum;
/* Calculate timestamp resolution */
- for (i = 0; i < dht11->num_edges; ++i) {
+ for (i = 1; i < dht11->num_edges; ++i) {
t = dht11->edges[i].ts - dht11->edges[i-1].ts;
if (t > 0 && t < timeres)
timeres = t;
@@ -138,6 +144,27 @@ static int dht11_decode(struct dht11 *dht11, int offset)
return 0;
}
+/*
+ * IRQ handler called on GPIO edges
+ */
+static irqreturn_t dht11_handle_irq(int irq, void *data)
+{
+ struct iio_dev *iio = data;
+ struct dht11 *dht11 = iio_priv(iio);
+
+ /* TODO: Consider making the handler safe for IRQ sharing */
+ if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
+ dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
+ dht11->edges[dht11->num_edges++].value =
+ gpio_get_value(dht11->gpio);
+
+ if (dht11->num_edges >= DHT11_EDGES_PER_READ)
+ complete(&dht11->completion);
+ }
+
+ return IRQ_HANDLED;
+}
+
static int dht11_read_raw(struct iio_dev *iio_dev,
const struct iio_chan_spec *chan,
int *val, int *val2, long m)
@@ -145,6 +172,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
struct dht11 *dht11 = iio_priv(iio_dev);
int ret;
+ mutex_lock(&dht11->lock);
if (dht11->timestamp + DHT11_DATA_VALID_TIME < iio_get_time_ns()) {
reinit_completion(&dht11->completion);
@@ -157,8 +185,17 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
if (ret)
goto err;
+ ret = request_irq(dht11->irq, dht11_handle_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ iio_dev->name, iio_dev);
+ if (ret)
+ goto err;
+
ret = wait_for_completion_killable_timeout(&dht11->completion,
HZ);
+
+ free_irq(dht11->irq, iio_dev);
+
if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) {
dev_err(&iio_dev->dev,
"Only %d signal edges detected\n",
@@ -185,6 +222,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
ret = -EINVAL;
err:
dht11->num_edges = -1;
+ mutex_unlock(&dht11->lock);
return ret;
}
@@ -193,27 +231,6 @@ static const struct iio_info dht11_iio_info = {
.read_raw = dht11_read_raw,
};
-/*
- * IRQ handler called on GPIO edges
-*/
-static irqreturn_t dht11_handle_irq(int irq, void *data)
-{
- struct iio_dev *iio = data;
- struct dht11 *dht11 = iio_priv(iio);
-
- /* TODO: Consider making the handler safe for IRQ sharing */
- if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
- dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
- dht11->edges[dht11->num_edges++].value =
- gpio_get_value(dht11->gpio);
-
- if (dht11->num_edges >= DHT11_EDGES_PER_READ)
- complete(&dht11->completion);
- }
-
- return IRQ_HANDLED;
-}
-
static const struct iio_chan_spec dht11_chan_spec[] = {
{ .type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), },
@@ -256,11 +273,6 @@ static int dht11_probe(struct platform_device *pdev)
dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
return -EINVAL;
}
- ret = devm_request_irq(dev, dht11->irq, dht11_handle_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- pdev->name, iio);
- if (ret)
- return ret;
dht11->timestamp = iio_get_time_ns() - DHT11_DATA_VALID_TIME - 1;
dht11->num_edges = -1;
@@ -268,6 +280,7 @@ static int dht11_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, iio);
init_completion(&dht11->completion);
+ mutex_init(&dht11->lock);
iio->name = pdev->name;
iio->dev.parent = &pdev->dev;
iio->info = &dht11_iio_info;
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index b54164677b89..fa3b809aff5e 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -45,12 +45,12 @@ static int si7020_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
{
- struct i2c_client *client = iio_priv(indio_dev);
+ struct i2c_client **client = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
- ret = i2c_smbus_read_word_data(client,
+ ret = i2c_smbus_read_word_data(*client,
chan->type == IIO_TEMP ?
SI7020CMD_TEMP_HOLD :
SI7020CMD_RH_HOLD);
@@ -126,7 +126,7 @@ static int si7020_probe(struct i2c_client *client,
/* Wait the maximum power-up time after software reset. */
msleep(15);
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client));
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
diff --git a/drivers/iio/imu/adis16400_core.c b/drivers/iio/imu/adis16400_core.c
index b70873de04ea..fa795dcd5f75 100644
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -26,6 +26,7 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/debugfs.h>
+#include <linux/bitops.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -414,7 +415,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
mutex_unlock(&indio_dev->mlock);
if (ret)
return ret;
- val16 = ((val16 & 0xFFF) << 4) >> 4;
+ val16 = sign_extend32(val16, 11);
*val = val16;
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index f73e60b7a796..d8d5bed65e07 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -780,7 +780,11 @@ static int inv_mpu_probe(struct i2c_client *client,
i2c_set_clientdata(client, indio_dev);
indio_dev->dev.parent = &client->dev;
- indio_dev->name = id->name;
+ /* id will be NULL when enumerated via ACPI */
+ if (id)
+ indio_dev->name = (char *)id->name;
+ else
+ indio_dev->name = (char *)dev_name(&client->dev);
indio_dev->channels = inv_mpu_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index ae68c64bdad3..a224afd6380c 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -73,6 +73,7 @@ config CM36651
config GP2AP020A00F
tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
depends on I2C
+ select REGMAP_I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select IRQ_WORK
@@ -126,6 +127,7 @@ config HID_SENSOR_PROX
config JSA1212
tristate "JSA1212 ALS and proximity sensor driver"
depends on I2C
+ select REGMAP_I2C
help
Say Y here if you want to build a IIO driver for JSA1212
proximity & ALS sensor device.
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 4c7a4c52dd06..a5d6de72c523 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -18,6 +18,8 @@ config AK8975
config AK09911
tristate "Asahi Kasei AK09911 3-axis Compass"
+ depends on I2C
+ depends on GPIOLIB
select AK8975
help
Deprecated: AK09911 is now supported by AK8975 driver.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 10:08:01 +0000