diff options
Diffstat (limited to 'drivers/iio/proximity')
| -rw-r--r-- | drivers/iio/proximity/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/iio/proximity/Makefile | 2 | ||||
| -rw-r--r-- | drivers/iio/proximity/vl53l0x-i2c.c | 164 |
3 files changed, 177 insertions, 0 deletions
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig index 388ef70c11d2..b99367a89f81 100644 --- a/drivers/iio/proximity/Kconfig +++ b/drivers/iio/proximity/Kconfig @@ -92,4 +92,15 @@ config SRF08 To compile this driver as a module, choose M here: the module will be called srf08. +config VL53L0X_I2C + tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)" + depends on I2C + help + Say Y here to build a driver for STMicroelectronics VL53L0X + ToF ranger sensors with i2c interface. + This driver can be used to measure the distance of objects. + + To compile this driver as a module, choose M here: the + module will be called vl53l0x-i2c. + endmenu diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile index cac3d7d3325e..6d031f903c4c 100644 --- a/drivers/iio/proximity/Makefile +++ b/drivers/iio/proximity/Makefile @@ -11,3 +11,5 @@ obj-$(CONFIG_RFD77402) += rfd77402.o obj-$(CONFIG_SRF04) += srf04.o obj-$(CONFIG_SRF08) += srf08.o obj-$(CONFIG_SX9500) += sx9500.o +obj-$(CONFIG_VL53L0X_I2C) += vl53l0x-i2c.o + diff --git a/drivers/iio/proximity/vl53l0x-i2c.c b/drivers/iio/proximity/vl53l0x-i2c.c new file mode 100644 index 000000000000..b48216cc1858 --- /dev/null +++ b/drivers/iio/proximity/vl53l0x-i2c.c @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for ST VL53L0X FlightSense ToF Ranging Sensor on a i2c bus. + * + * Copyright (C) 2016 STMicroelectronics Imaging Division. + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com> + * + * Datasheet available at + * <https://www.st.com/resource/en/datasheet/vl53l0x.pdf> + * + * Default 7-bit i2c slave address 0x29. + * + * TODO: FIFO buffer, continuous mode, interrupts, range selection, + * sensor ID check. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/module.h> + +#include <linux/iio/iio.h> + +#define VL_REG_SYSRANGE_START 0x00 + +#define VL_REG_SYSRANGE_MODE_MASK GENMASK(3, 0) +#define VL_REG_SYSRANGE_MODE_SINGLESHOT 0x00 +#define VL_REG_SYSRANGE_MODE_START_STOP BIT(0) +#define VL_REG_SYSRANGE_MODE_BACKTOBACK BIT(1) +#define VL_REG_SYSRANGE_MODE_TIMED BIT(2) +#define VL_REG_SYSRANGE_MODE_HISTOGRAM BIT(3) + +#define VL_REG_RESULT_INT_STATUS 0x13 +#define VL_REG_RESULT_RANGE_STATUS 0x14 +#define VL_REG_RESULT_RANGE_STATUS_COMPLETE BIT(0) + +struct vl53l0x_data { + struct i2c_client *client; +}; + +static int vl53l0x_read_proximity(struct vl53l0x_data *data, + const struct iio_chan_spec *chan, + int *val) +{ + struct i2c_client *client = data->client; + u16 tries = 20; + u8 buffer[12]; + int ret; + + ret = i2c_smbus_write_byte_data(client, VL_REG_SYSRANGE_START, 1); + if (ret < 0) + return ret; + + do { + ret = i2c_smbus_read_byte_data(client, + VL_REG_RESULT_RANGE_STATUS); + if (ret < 0) + return ret; + + if (ret & VL_REG_RESULT_RANGE_STATUS_COMPLETE) + break; + + usleep_range(1000, 5000); + } while (--tries); + if (!tries) + return -ETIMEDOUT; + + ret = i2c_smbus_read_i2c_block_data(client, VL_REG_RESULT_RANGE_STATUS, + 12, buffer); + if (ret < 0) + return ret; + else if (ret != 12) + return -EREMOTEIO; + + /* Values should be between 30~1200 in millimeters. */ + *val = (buffer[10] << 8) + buffer[11]; + + return 0; +} + +static const struct iio_chan_spec vl53l0x_channels[] = { + { + .type = IIO_DISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static int vl53l0x_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct vl53l0x_data *data = iio_priv(indio_dev); + int ret; + + if (chan->type != IIO_DISTANCE) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = vl53l0x_read_proximity(data, chan, val); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 1000; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_info vl53l0x_info = { + .read_raw = vl53l0x_read_raw, +}; + +static int vl53l0x_probe(struct i2c_client *client) +{ + struct vl53l0x_data *data; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + i2c_set_clientdata(client, indio_dev); + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK | + I2C_FUNC_SMBUS_BYTE_DATA)) + return -EOPNOTSUPP; + + indio_dev->dev.parent = &client->dev; + indio_dev->name = "vl53l0x"; + indio_dev->info = &vl53l0x_info; + indio_dev->channels = vl53l0x_channels; + indio_dev->num_channels = ARRAY_SIZE(vl53l0x_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct of_device_id st_vl53l0x_dt_match[] = { + { .compatible = "st,vl53l0x", }, + { } +}; +MODULE_DEVICE_TABLE(of, st_vl53l0x_dt_match); + +static struct i2c_driver vl53l0x_driver = { + .driver = { + .name = "vl53l0x-i2c", + .of_match_table = st_vl53l0x_dt_match, + }, + .probe_new = vl53l0x_probe, +}; +module_i2c_driver(vl53l0x_driver); + +MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>"); +MODULE_DESCRIPTION("ST vl53l0x ToF ranging sensor driver"); +MODULE_LICENSE("GPL v2"); |