diff options
Diffstat (limited to 'drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h')
| -rw-r--r-- | drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 2beb4f563892..d20746eb3d2d 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -43,6 +43,24 @@ enum st_lsm6dsx_hw_id { * ST_LSM6DSX_TAGGED_SAMPLE_SIZE) #define ST_LSM6DSX_SHIFT_VAL(val, mask) (((val) << __ffs(mask)) & (mask)) +#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \ +{ \ + .type = chan_type, \ + .address = addr, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = scan_idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + struct st_lsm6dsx_reg { u8 addr; u8 mask; @@ -50,6 +68,28 @@ struct st_lsm6dsx_reg { struct st_lsm6dsx_hw; +struct st_lsm6dsx_odr { + u16 hz; + u8 val; +}; + +#define ST_LSM6DSX_ODR_LIST_SIZE 6 +struct st_lsm6dsx_odr_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE]; +}; + +struct st_lsm6dsx_fs { + u32 gain; + u8 val; +}; + +#define ST_LSM6DSX_FS_LIST_SIZE 4 +struct st_lsm6dsx_fs_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE]; +}; + /** * struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings * @read_fifo: Read FIFO callback. @@ -85,6 +125,66 @@ struct st_lsm6dsx_hw_ts_settings { }; /** + * struct st_lsm6dsx_shub_settings - ST IMU hw i2c controller settings + * @page_mux: register page mux info (addr + mask). + * @master_en: master config register info (addr + mask). + * @pullup_en: i2c controller pull-up register info (addr + mask). + * @aux_sens: aux sensor register info (addr + mask). + * @shub_out: sensor hub first output register info. + * @slv0_addr: slave0 address in secondary page. + * @dw_slv0_addr: slave0 write register address in secondary page. + */ +struct st_lsm6dsx_shub_settings { + struct st_lsm6dsx_reg page_mux; + struct st_lsm6dsx_reg master_en; + struct st_lsm6dsx_reg pullup_en; + struct st_lsm6dsx_reg aux_sens; + u8 shub_out; + u8 slv0_addr; + u8 dw_slv0_addr; +}; + +enum st_lsm6dsx_ext_sensor_id { + ST_LSM6DSX_ID_MAGN, +}; + +/** + * struct st_lsm6dsx_ext_dev_settings - i2c controller slave settings + * @i2c_addr: I2c slave address list. + * @wai: Wai address info. + * @id: external sensor id. + * @odr: Output data rate of the sensor [Hz]. + * @gain: Configured sensor sensitivity. + * @temp_comp: Temperature compensation register info (addr + mask). + * @pwr_table: Power on register info (addr + mask). + * @off_canc: Offset cancellation register info (addr + mask). + * @bdu: Block data update register info (addr + mask). + * @out: Output register info. + */ +struct st_lsm6dsx_ext_dev_settings { + u8 i2c_addr[2]; + struct { + u8 addr; + u8 val; + } wai; + enum st_lsm6dsx_ext_sensor_id id; + struct st_lsm6dsx_odr_table_entry odr_table; + struct st_lsm6dsx_fs_table_entry fs_table; + struct st_lsm6dsx_reg temp_comp; + struct { + struct st_lsm6dsx_reg reg; + u8 off_val; + u8 on_val; + } pwr_table; + struct st_lsm6dsx_reg off_canc; + struct st_lsm6dsx_reg bdu; + struct { + u8 addr; + u8 len; + } out; +}; + +/** * struct st_lsm6dsx_settings - ST IMU sensor settings * @wai: Sensor WhoAmI default value. * @max_fifo_size: Sensor max fifo length in FIFO words. @@ -93,6 +193,7 @@ struct st_lsm6dsx_hw_ts_settings { * @batch: List of FIFO batching register info (addr + mask). * @fifo_ops: Sensor hw FIFO parameters. * @ts_settings: Hw timer related settings. + * @shub_settings: i2c controller related settings. */ struct st_lsm6dsx_settings { u8 wai; @@ -102,6 +203,7 @@ struct st_lsm6dsx_settings { struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID]; struct st_lsm6dsx_fifo_ops fifo_ops; struct st_lsm6dsx_hw_ts_settings ts_settings; + struct st_lsm6dsx_shub_settings shub_settings; }; enum st_lsm6dsx_sensor_id { @@ -129,6 +231,7 @@ enum st_lsm6dsx_fifo_mode { * @sip: Number of samples in a given pattern. * @decimator: FIFO decimation factor. * @ts_ref: Sensor timestamp reference for hw one. + * @ext_info: Sensor settings if it is connected to i2c controller */ struct st_lsm6dsx_sensor { char name[32]; @@ -142,6 +245,11 @@ struct st_lsm6dsx_sensor { u8 sip; u8 decimator; s64 ts_ref; + + struct { + const struct st_lsm6dsx_ext_dev_settings *settings; + u8 addr; + } ext_info; }; /** @@ -181,6 +289,7 @@ struct st_lsm6dsx_hw { const struct st_lsm6dsx_settings *settings; }; +static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; extern const struct dev_pm_ops st_lsm6dsx_pm_ops; int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, @@ -197,6 +306,9 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val); +int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name); +int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable); +int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable); static inline int st_lsm6dsx_update_bits_locked(struct st_lsm6dsx_hw *hw, unsigned int addr, |