1 files changed, 158 insertions, 82 deletions

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index b15cad58dc81..a8e9e8a69a52 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -39,17 +39,18 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
 	if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
 			 (progif & 5) != 5) {
 		if ((progif & 0xa) != 0xa) {
-			printk(KERN_INFO "%s: device not capable of full "
-				"native PCI mode\n", name);
+			printk(KERN_INFO "%s %s: device not capable of full "
+				"native PCI mode\n", name, pci_name(dev));
 			return -EOPNOTSUPP;
 		}
-		printk("%s: placing both ports into native PCI mode\n", name);
+		printk(KERN_INFO "%s %s: placing both ports into native PCI "
+			"mode\n", name, pci_name(dev));
 		(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
 		if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
 		    (progif & 5) != 5) {
-			printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted "
-				"0x%04x, got 0x%04x\n",
-				name, progif|5, progif);
+			printk(KERN_ERR "%s %s: rewrite of PROGIF failed, "
+				"wanted 0x%04x, got 0x%04x\n",
+				name, pci_name(dev), progif | 5, progif);
 			return -EOPNOTSUPP;
 		}
 	}
@@ -57,14 +58,14 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
+static int ide_pci_clear_simplex(unsigned long dma_base, const char *name)
 {
 	u8 dma_stat = inb(dma_base + 2);
 
 	outb(dma_stat & 0x60, dma_base + 2);
 	dma_stat = inb(dma_base + 2);
-	if (dma_stat & 0x80)
-		printk(KERN_INFO "%s: simplex device: DMA forced\n", name);
+
+	return (dma_stat & 0x80) ? 1 : 0;
 }
 
 /**
@@ -91,7 +92,8 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 		dma_base = pci_resource_start(dev, baridx);
 
 		if (dma_base == 0) {
-			printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
+			printk(KERN_ERR "%s %s: DMA base is invalid\n",
+				d->name, pci_name(dev));
 			return 0;
 		}
 	}
@@ -105,13 +107,16 @@ EXPORT_SYMBOL_GPL(ide_pci_dma_base);
 
 int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 dma_stat;
 
 	if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
 		goto out;
 
 	if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
-		ide_pci_clear_simplex(hwif->dma_base, d->name);
+		if (ide_pci_clear_simplex(hwif->dma_base, d->name))
+			printk(KERN_INFO "%s %s: simplex device: DMA forced\n",
+				d->name, pci_name(dev));
 		goto out;
 	}
 
@@ -127,7 +132,8 @@ int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
 	 */
 	dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
 	if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
-		printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
+		printk(KERN_INFO "%s %s: simplex device: DMA disabled\n",
+			d->name, pci_name(dev));
 		return -1;
 	}
 out:
@@ -149,8 +155,8 @@ int ide_pci_set_master(struct pci_dev *dev, const char *name)
 
 		if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
 		    (pcicmd & PCI_COMMAND_MASTER) == 0) {
-			printk(KERN_ERR "%s: error updating PCICMD on %s\n",
-					name, pci_name(dev));
+			printk(KERN_ERR "%s %s: error updating PCICMD\n",
+				name, pci_name(dev));
 			return -EIO;
 		}
 	}
@@ -162,9 +168,9 @@ EXPORT_SYMBOL_GPL(ide_pci_set_master);
 
 void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
 {
-	printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at "
-			 " PCI slot %s\n", d->name, dev->vendor, dev->device,
-			 dev->revision, pci_name(dev));
+	printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n",
+		d->name, pci_name(dev),
+		dev->vendor, dev->device, dev->revision);
 }
 EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
 
@@ -189,11 +195,12 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 	if (pci_enable_device(dev)) {
 		ret = pci_enable_device_io(dev);
 		if (ret < 0) {
-			printk(KERN_WARNING "%s: (ide_setup_pci_device:) "
-				"Could not enable device.\n", d->name);
+			printk(KERN_WARNING "%s %s: couldn't enable device\n",
+				d->name, pci_name(dev));
 			goto out;
 		}
-		printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name);
+		printk(KERN_WARNING "%s %s: BIOS configuration fixed\n",
+			d->name, pci_name(dev));
 	}
 
 	/*
@@ -203,7 +210,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 	 */
 	ret = pci_set_dma_mask(dev, DMA_32BIT_MASK);
 	if (ret < 0) {
-		printk(KERN_ERR "%s: can't set dma mask\n", d->name);
+		printk(KERN_ERR "%s %s: can't set DMA mask\n",
+			d->name, pci_name(dev));
 		goto out;
 	}
 
@@ -221,7 +229,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 
 	ret = pci_request_selected_regions(dev, bars, d->name);
 	if (ret < 0)
-		printk(KERN_ERR "%s: can't reserve resources\n", d->name);
+		printk(KERN_ERR "%s %s: can't reserve resources\n",
+			d->name, pci_name(dev));
 out:
 	return ret;
 }
@@ -247,15 +256,18 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d)
 	 */
 	if (ide_setup_pci_baseregs(dev, d->name) ||
 	    pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) {
-		printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name);
+		printk(KERN_INFO "%s %s: device disabled (BIOS)\n",
+			d->name, pci_name(dev));
 		return -ENODEV;
 	}
 	if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
-		printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+		printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+			d->name, pci_name(dev));
 		return -EIO;
 	}
 	if (!(pcicmd & PCI_COMMAND_IO)) {
-		printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name);
+		printk(KERN_ERR "%s %s: unable to enable IDE controller\n",
+			d->name, pci_name(dev));
 		return -ENXIO;
 	}
 	return 0;
@@ -311,8 +323,9 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
 	if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
 		if (ide_pci_check_iomem(dev, d, 2 * port) ||
 		    ide_pci_check_iomem(dev, d, 2 * port + 1)) {
-			printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported "
-					"as MEM for port %d!\n", d->name, port);
+			printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are "
+				"reported as MEM for port %d!\n",
+				d->name, pci_name(dev), port);
 			return -EINVAL;
 		}
 
@@ -325,8 +338,8 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
 	}
 
 	if (!base || !ctl) {
-		printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
-				d->name, port);
+		printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n",
+			d->name, pci_name(dev), port);
 		return -EINVAL;
 	}
 
@@ -393,14 +406,14 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
  *	@dev: PCI device
  *	@d: IDE port info
  *	@noisy: verbose flag
- *	@config: returned as 1 if we configured the hardware
  *
  *	Set up the PCI and controller side of the IDE interface. This brings
  *	up the PCI side of the device, checks that the device is enabled
  *	and enables it if need be
  */
 
-static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_info *d, int noisy, int *config)
+static int ide_setup_pci_controller(struct pci_dev *dev,
+				    const struct ide_port_info *d, int noisy)
 {
 	int ret;
 	u16 pcicmd;
@@ -414,15 +427,16 @@ static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_i
 
 	ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
 	if (ret < 0) {
-		printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+		printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+			d->name, pci_name(dev));
 		goto out;
 	}
 	if (!(pcicmd & PCI_COMMAND_IO)) {	/* is device disabled? */
 		ret = ide_pci_configure(dev, d);
 		if (ret < 0)
 			goto out;
-		*config = 1;
-		printk(KERN_INFO "%s: device enabled (Linux)\n", d->name);
+		printk(KERN_INFO "%s %s: device enabled (Linux)\n",
+			d->name, pci_name(dev));
 	}
 
 out:
@@ -461,7 +475,8 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
 
 		if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
 		    (tmp & e->mask) != e->val)) {
-			printk(KERN_INFO "%s: IDE port disabled\n", d->name);
+			printk(KERN_INFO "%s %s: IDE port disabled\n",
+				d->name, pci_name(dev));
 			continue;	/* port not enabled */
 		}
 
@@ -487,51 +502,35 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 				   const struct ide_port_info *d,
 				   u8 noisy)
 {
-	int tried_config = 0;
 	int pciirq, ret;
 
-	ret = ide_setup_pci_controller(dev, d, noisy, &tried_config);
-	if (ret < 0)
-		goto out;
-
 	/*
 	 * Can we trust the reported IRQ?
 	 */
 	pciirq = dev->irq;
 
+	/*
+	 * This allows offboard ide-pci cards the enable a BIOS,
+	 * verify interrupt settings of split-mirror pci-config
+	 * space, place chipset into init-mode, and/or preserve
+	 * an interrupt if the card is not native ide support.
+	 */
+	ret = d->init_chipset ? d->init_chipset(dev) : 0;
+	if (ret < 0)
+		goto out;
+
 	/* Is it an "IDE storage" device in non-PCI mode? */
 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) {
 		if (noisy)
-			printk(KERN_INFO "%s: not 100%% native mode: "
-				"will probe irqs later\n", d->name);
-		/*
-		 * This allows offboard ide-pci cards the enable a BIOS,
-		 * verify interrupt settings of split-mirror pci-config
-		 * space, place chipset into init-mode, and/or preserve
-		 * an interrupt if the card is not native ide support.
-		 */
-		ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0;
-		if (ret < 0)
-			goto out;
+			printk(KERN_INFO "%s %s: not 100%% native mode: will "
+				"probe irqs later\n", d->name, pci_name(dev));
 		pciirq = ret;
-	} else if (tried_config) {
-		if (noisy)
-			printk(KERN_INFO "%s: will probe irqs later\n", d->name);
-		pciirq = 0;
-	} else if (!pciirq) {
-		if (noisy)
-			printk(KERN_WARNING "%s: bad irq (%d): will probe later\n",
-				d->name, pciirq);
-		pciirq = 0;
-	} else {
-		if (d->init_chipset) {
-			ret = d->init_chipset(dev, d->name);
-			if (ret < 0)
-				goto out;
-		}
-		if (noisy)
-			printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
-				d->name, pciirq);
+	} else if (!pciirq && noisy) {
+		printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n",
+			d->name, pci_name(dev), pciirq);
+	} else if (noisy) {
+		printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n",
+			d->name, pci_name(dev), pciirq);
 	}
 
 	ret = pciirq;
@@ -539,32 +538,77 @@ out:
 	return ret;
 }
 
-int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
+int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
+		     void *priv)
 {
+	struct ide_host *host;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 	int ret;
 
-	ret = do_ide_setup_pci_device(dev, d, 1);
+	ret = ide_setup_pci_controller(dev, d, 1);
+	if (ret < 0)
+		goto out;
 
-	if (ret >= 0) {
-		/* FIXME: silent failure can happen */
-		ide_pci_setup_ports(dev, d, ret, &hw[0], &hws[0]);
+	ide_pci_setup_ports(dev, d, 0, &hw[0], &hws[0]);
 
-		ret = ide_host_add(d, hws, NULL);
+	host = ide_host_alloc(d, hws);
+	if (host == NULL) {
+		ret = -ENOMEM;
+		goto out;
 	}
 
+	host->dev[0] = &dev->dev;
+
+	host->host_priv = priv;
+
+	pci_set_drvdata(dev, host);
+
+	ret = do_ide_setup_pci_device(dev, d, 1);
+	if (ret < 0)
+		goto out;
+
+	/* fixup IRQ */
+	hw[1].irq = hw[0].irq = ret;
+
+	ret = ide_host_register(host, d, hws);
+	if (ret)
+		ide_host_free(host);
+out:
 	return ret;
 }
-EXPORT_SYMBOL_GPL(ide_setup_pci_device);
+EXPORT_SYMBOL_GPL(ide_pci_init_one);
 
-int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
-			  const struct ide_port_info *d)
+int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
+		     const struct ide_port_info *d, void *priv)
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
+	struct ide_host *host;
 	int ret, i;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
 	for (i = 0; i < 2; i++) {
+		ret = ide_setup_pci_controller(pdev[i], d, !i);
+		if (ret < 0)
+			goto out;
+
+		ide_pci_setup_ports(pdev[i], d, 0, &hw[i*2], &hws[i*2]);
+	}
+
+	host = ide_host_alloc(d, hws);
+	if (host == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	host->dev[0] = &dev1->dev;
+	host->dev[1] = &dev2->dev;
+
+	host->host_priv = priv;
+
+	pci_set_drvdata(pdev[0], host);
+	pci_set_drvdata(pdev[1], host);
+
+	for (i = 0; i < 2; i++) {
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
 		/*
@@ -574,12 +618,44 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 		if (ret < 0)
 			goto out;
 
-		/* FIXME: silent failure can happen */
-		ide_pci_setup_ports(pdev[i], d, ret, &hw[i*2], &hws[i*2]);
+		/* fixup IRQ */
+		hw[i*2 + 1].irq = hw[i*2].irq = ret;
 	}
 
-	ret = ide_host_add(d, hws, NULL);
+	ret = ide_host_register(host, d, hws);
+	if (ret)
+		ide_host_free(host);
 out:
 	return ret;
 }
-EXPORT_SYMBOL_GPL(ide_setup_pci_devices);
+EXPORT_SYMBOL_GPL(ide_pci_init_two);
+
+void ide_pci_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+	int bars;
+
+	if (host->host_flags & IDE_HFLAG_SINGLE)
+		bars = (1 << 2) - 1;
+	else
+		bars = (1 << 4) - 1;
+
+	if ((host->host_flags & IDE_HFLAG_NO_DMA) == 0) {
+		if (host->host_flags & IDE_HFLAG_CS5520)
+			bars |= (1 << 2);
+		else
+			bars |= (1 << 4);
+	}
+
+	ide_host_remove(host);
+
+	if (dev2)
+		pci_release_selected_regions(dev2, bars);
+	pci_release_selected_regions(dev, bars);
+
+	if (dev2)
+		pci_disable_device(dev2);
+	pci_disable_device(dev);
+}
+EXPORT_SYMBOL_GPL(ide_pci_remove);