diff options
Diffstat (limited to 'drivers/ide/ide-io.c')
| -rw-r--r-- | drivers/ide/ide-io.c | 856 |
1 files changed, 272 insertions, 584 deletions
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index cc35d6dbd410..cc163319dfbd 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -84,11 +84,11 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq, ide_dma_on(drive); } - if (!__blk_end_request(rq, error, nr_bytes)) { - if (dequeue) - HWGROUP(drive)->rq = NULL; + if (!blk_end_request(rq, error, nr_bytes)) ret = 0; - } + + if (ret == 0 && dequeue) + drive->hwif->rq = NULL; return ret; } @@ -107,16 +107,7 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq, int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) { unsigned int nr_bytes = nr_sectors << 9; - struct request *rq; - unsigned long flags; - int ret = 1; - - /* - * room for locking improvements here, the calls below don't - * need the queue lock held at all - */ - spin_lock_irqsave(&ide_lock, flags); - rq = HWGROUP(drive)->rq; + struct request *rq = drive->hwif->rq; if (!nr_bytes) { if (blk_pc_request(rq)) @@ -125,105 +116,10 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) nr_bytes = rq->hard_cur_sectors << 9; } - ret = __ide_end_request(drive, rq, uptodate, nr_bytes, 1); - - spin_unlock_irqrestore(&ide_lock, flags); - return ret; + return __ide_end_request(drive, rq, uptodate, nr_bytes, 1); } EXPORT_SYMBOL(ide_end_request); -static void ide_complete_power_step(ide_drive_t *drive, struct request *rq) -{ - struct request_pm_state *pm = rq->data; - -#ifdef DEBUG_PM - printk(KERN_INFO "%s: complete_power_step(step: %d)\n", - drive->name, pm->pm_step); -#endif - if (drive->media != ide_disk) - return; - - switch (pm->pm_step) { - case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ - if (pm->pm_state == PM_EVENT_FREEZE) - pm->pm_step = IDE_PM_COMPLETED; - else - pm->pm_step = IDE_PM_STANDBY; - break; - case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - pm->pm_step = IDE_PM_COMPLETED; - break; - case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ - pm->pm_step = IDE_PM_IDLE; - break; - case IDE_PM_IDLE: /* Resume step 2 (idle)*/ - pm->pm_step = IDE_PM_RESTORE_DMA; - break; - } -} - -static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) -{ - struct request_pm_state *pm = rq->data; - ide_task_t *args = rq->special; - - memset(args, 0, sizeof(*args)); - - switch (pm->pm_step) { - case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ - if (drive->media != ide_disk) - break; - /* Not supported? Switch to next step now. */ - if (ata_id_flush_enabled(drive->id) == 0 || - (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { - ide_complete_power_step(drive, rq); - return ide_stopped; - } - if (ata_id_flush_ext_enabled(drive->id)) - args->tf.command = ATA_CMD_FLUSH_EXT; - else - args->tf.command = ATA_CMD_FLUSH; - goto out_do_tf; - case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - args->tf.command = ATA_CMD_STANDBYNOW1; - goto out_do_tf; - case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ - ide_set_max_pio(drive); - /* - * skip IDE_PM_IDLE for ATAPI devices - */ - if (drive->media != ide_disk) - pm->pm_step = IDE_PM_RESTORE_DMA; - else - ide_complete_power_step(drive, rq); - return ide_stopped; - case IDE_PM_IDLE: /* Resume step 2 (idle) */ - args->tf.command = ATA_CMD_IDLEIMMEDIATE; - goto out_do_tf; - case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ - /* - * Right now, all we do is call ide_set_dma(drive), - * we could be smarter and check for current xfer_speed - * in struct drive etc... - */ - if (drive->hwif->dma_ops == NULL) - break; - /* - * TODO: respect IDE_DFLAG_USING_DMA - */ - ide_set_dma(drive); - break; - } - - pm->pm_step = IDE_PM_COMPLETED; - return ide_stopped; - -out_do_tf: - args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - args->data_phase = TASKFILE_NO_DATA; - return do_rw_taskfile(drive, args); -} - /** * ide_end_dequeued_request - complete an IDE I/O * @drive: IDE device for the I/O @@ -242,48 +138,12 @@ out_do_tf: int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq, int uptodate, int nr_sectors) { - unsigned long flags; - int ret; - - spin_lock_irqsave(&ide_lock, flags); BUG_ON(!blk_rq_started(rq)); - ret = __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0); - spin_unlock_irqrestore(&ide_lock, flags); - return ret; + return __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0); } EXPORT_SYMBOL_GPL(ide_end_dequeued_request); - -/** - * ide_complete_pm_request - end the current Power Management request - * @drive: target drive - * @rq: request - * - * This function cleans up the current PM request and stops the queue - * if necessary. - */ -static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq) -{ - unsigned long flags; - -#ifdef DEBUG_PM - printk("%s: completing PM request, %s\n", drive->name, - blk_pm_suspend_request(rq) ? "suspend" : "resume"); -#endif - spin_lock_irqsave(&ide_lock, flags); - if (blk_pm_suspend_request(rq)) { - blk_stop_queue(drive->queue); - } else { - drive->dev_flags &= ~IDE_DFLAG_BLOCKED; - blk_start_queue(drive->queue); - } - HWGROUP(drive)->rq = NULL; - if (__blk_end_request(rq, 0, 0)) - BUG(); - spin_unlock_irqrestore(&ide_lock, flags); -} - /** * ide_end_drive_cmd - end an explicit drive command * @drive: command @@ -300,19 +160,12 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq) void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) { - unsigned long flags; - struct request *rq; - - spin_lock_irqsave(&ide_lock, flags); - rq = HWGROUP(drive)->rq; - spin_unlock_irqrestore(&ide_lock, flags); + ide_hwif_t *hwif = drive->hwif; + struct request *rq = hwif->rq; if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { ide_task_t *task = (ide_task_t *)rq->special; - if (rq->errors == 0) - rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT); - if (task) { struct ide_taskfile *tf = &task->tf; @@ -333,23 +186,22 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) return; } - spin_lock_irqsave(&ide_lock, flags); - HWGROUP(drive)->rq = NULL; + hwif->rq = NULL; + rq->errors = err; - if (unlikely(__blk_end_request(rq, (rq->errors ? -EIO : 0), - blk_rq_bytes(rq)))) + + if (unlikely(blk_end_request(rq, (rq->errors ? -EIO : 0), + blk_rq_bytes(rq)))) BUG(); - spin_unlock_irqrestore(&ide_lock, flags); } - EXPORT_SYMBOL(ide_end_drive_cmd); static void ide_kill_rq(ide_drive_t *drive, struct request *rq) { if (rq->rq_disk) { - ide_driver_t *drv; + struct ide_driver *drv; - drv = *(ide_driver_t **)rq->rq_disk->private_data; + drv = *(struct ide_driver **)rq->rq_disk->private_data; drv->end_request(drive, 0, 0); } else ide_end_request(drive, 0, 0); @@ -439,7 +291,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u return ide_stopped; } -ide_startstop_t +static ide_startstop_t __ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) { if (drive->media == ide_disk) @@ -447,8 +299,6 @@ __ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) return ide_atapi_error(drive, rq, stat, err); } -EXPORT_SYMBOL_GPL(__ide_error); - /** * ide_error - handle an error on the IDE * @drive: drive the error occurred on @@ -469,7 +319,8 @@ ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat) err = ide_dump_status(drive, msg, stat); - if ((rq = HWGROUP(drive)->rq) == NULL) + rq = drive->hwif->rq; + if (rq == NULL) return ide_stopped; /* retry only "normal" I/O: */ @@ -479,15 +330,8 @@ ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat) return ide_stopped; } - if (rq->rq_disk) { - ide_driver_t *drv; - - drv = *(ide_driver_t **)rq->rq_disk->private_data; - return drv->error(drive, rq, stat, err); - } else - return __ide_error(drive, rq, stat, err); + return __ide_error(drive, rq, stat, err); } - EXPORT_SYMBOL_GPL(ide_error); static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) @@ -574,9 +418,6 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq) ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; - if (hwif->sg_mapped) /* needed by ide-scsi */ - return; - if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) { hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); } else { @@ -613,7 +454,7 @@ EXPORT_SYMBOL_GPL(ide_init_sg_cmd); static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, struct request *rq) { - ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *hwif = drive->hwif; ide_task_t *task = rq->special; if (task) { @@ -720,40 +561,6 @@ static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) } } -static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) -{ - struct request_pm_state *pm = rq->data; - - if (blk_pm_suspend_request(rq) && - pm->pm_step == IDE_PM_START_SUSPEND) - /* Mark drive blocked when starting the suspend sequence. */ - drive->dev_flags |= IDE_DFLAG_BLOCKED; - else if (blk_pm_resume_request(rq) && - pm->pm_step == IDE_PM_START_RESUME) { - /* - * The first thing we do on wakeup is to wait for BSY bit to - * go away (with a looong timeout) as a drive on this hwif may - * just be POSTing itself. - * We do that before even selecting as the "other" device on - * the bus may be broken enough to walk on our toes at this - * point. - */ - ide_hwif_t *hwif = drive->hwif; - int rc; -#ifdef DEBUG_PM - printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name); -#endif - rc = ide_wait_not_busy(hwif, 35000); - if (rc) - printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); - SELECT_DRIVE(drive); - hwif->tp_ops->set_irq(hwif, 1); - rc = ide_wait_not_busy(hwif, 100000); - if (rc) - printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); - } -} - /** * start_request - start of I/O and command issuing for IDE * @@ -771,7 +578,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) #ifdef DEBUG printk("%s: start_request: current=0x%08lx\n", - HWIF(drive)->name, (unsigned long) rq); + drive->hwif->name, (unsigned long) rq); #endif /* bail early if we've exceeded max_failures */ @@ -790,7 +597,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) return startstop; } if (!drive->special.all) { - ide_driver_t *drv; + struct ide_driver *drv; /* * We reset the drive so we need to issue a SETFEATURES. @@ -823,7 +630,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) */ return ide_special_rq(drive, rq); - drv = *(ide_driver_t **)rq->rq_disk->private_data; + drv = *(struct ide_driver **)rq->rq_disk->private_data; return drv->do_request(drive, rq, rq->sector); } @@ -839,7 +646,7 @@ kill_rq: * @timeout: time to stall for (jiffies) * * ide_stall_queue() can be used by a drive to give excess bandwidth back - * to the hwgroup by sleeping for timeout jiffies. + * to the port by sleeping for timeout jiffies. */ void ide_stall_queue (ide_drive_t *drive, unsigned long timeout) @@ -849,206 +656,117 @@ void ide_stall_queue (ide_drive_t *drive, unsigned long timeout) drive->sleep = timeout + jiffies; drive->dev_flags |= IDE_DFLAG_SLEEPING; } - EXPORT_SYMBOL(ide_stall_queue); -#define WAKEUP(drive) ((drive)->service_start + 2 * (drive)->service_time) +static inline int ide_lock_port(ide_hwif_t *hwif) +{ + if (hwif->busy) + return 1; -/** - * choose_drive - select a drive to service - * @hwgroup: hardware group to select on - * - * choose_drive() selects the next drive which will be serviced. - * This is necessary because the IDE layer can't issue commands - * to both drives on the same cable, unlike SCSI. - */ - -static inline ide_drive_t *choose_drive (ide_hwgroup_t *hwgroup) + hwif->busy = 1; + + return 0; +} + +static inline void ide_unlock_port(ide_hwif_t *hwif) +{ + hwif->busy = 0; +} + +static inline int ide_lock_host(struct ide_host *host, ide_hwif_t *hwif) { - ide_drive_t *drive, *best; + int rc = 0; -repeat: - best = NULL; - drive = hwgroup->drive; + if (host->host_flags & IDE_HFLAG_SERIALIZE) { + rc = test_and_set_bit_lock(IDE_HOST_BUSY, &host->host_busy); + if (rc == 0) { + /* for atari only */ + ide_get_lock(ide_intr, hwif); + } + } + return rc; +} + +static inline void ide_unlock_host(struct ide_host *host) +{ + if (host->host_flags & IDE_HFLAG_SERIALIZE) { + /* for atari only */ + ide_release_lock(); + clear_bit_unlock(IDE_HOST_BUSY, &host->host_busy); + } +} + +/* + * Issue a new request to a device. + */ +void do_ide_request(struct request_queue *q) +{ + ide_drive_t *drive = q->queuedata; + ide_hwif_t *hwif = drive->hwif; + struct ide_host *host = hwif->host; + struct request *rq = NULL; + ide_startstop_t startstop; /* * drive is doing pre-flush, ordered write, post-flush sequence. even * though that is 3 requests, it must be seen as a single transaction. * we must not preempt this drive until that is complete */ - if (blk_queue_flushing(drive->queue)) { + if (blk_queue_flushing(q)) /* * small race where queue could get replugged during * the 3-request flush cycle, just yank the plug since * we want it to finish asap */ - blk_remove_plug(drive->queue); - return drive; - } + blk_remove_plug(q); - do { - u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING); - u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING)); - - if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) && - !elv_queue_empty(drive->queue)) { - if (best == NULL || - (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) || - (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) { - if (!blk_queue_plugged(drive->queue)) - best = drive; - } - } - } while ((drive = drive->next) != hwgroup->drive); + spin_unlock_irq(q->queue_lock); - if (best && (best->dev_flags & IDE_DFLAG_NICE1) && - (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 && - best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) { - long t = (signed long)(WAKEUP(best) - jiffies); - if (t >= WAIT_MIN_SLEEP) { - /* - * We *may* have some time to spare, but first let's see if - * someone can potentially benefit from our nice mood today.. - */ - drive = best->next; - do { - if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0 - && time_before(jiffies - best->service_time, WAKEUP(drive)) - && time_before(WAKEUP(drive), jiffies + t)) - { - ide_stall_queue(best, min_t(long, t, 10 * WAIT_MIN_SLEEP)); - goto repeat; - } - } while ((drive = drive->next) != best); - } - } - return best; -} + if (ide_lock_host(host, hwif)) + goto plug_device_2; -/* - * Issue a new request to a drive from hwgroup - * Caller must have already done spin_lock_irqsave(&ide_lock, ..); - * - * A hwgroup is a serialized group of IDE interfaces. Usually there is - * exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640) - * may have both interfaces in a single hwgroup to "serialize" access. - * Or possibly multiple ISA interfaces can share a common IRQ by being grouped - * together into one hwgroup for serialized access. - * - * Note also that several hwgroups can end up sharing a single IRQ, - * possibly along with many other devices. This is especially common in - * PCI-based systems with off-board IDE controller cards. - * - * The IDE driver uses the single global ide_lock spinlock to protect - * access to the request queues, and to protect the hwgroup->busy flag. - * - * The first thread into the driver for a particular hwgroup sets the - * hwgroup->busy flag to indicate that this hwgroup is now active, - * and then initiates processing of the top request from the request queue. - * - * Other threads attempting entry notice the busy setting, and will simply - * queue their new requests and exit immediately. Note that hwgroup->busy - * remains set even when the driver is merely awaiting the next interrupt. - * Thus, the meaning is "this hwgroup is busy processing a request". - * - * When processing of a request completes, the completing thread or IRQ-handler - * will start the next request from the queue. If no more work remains, - * the driver will clear the hwgroup->busy flag and exit. - * - * The ide_lock (spinlock) is used to protect all access to the - * hwgroup->busy flag, but is otherwise not needed for most processing in - * the driver. This makes the driver much more friendlier to shared IRQs - * than previous designs, while remaining 100% (?) SMP safe and capable. - */ -static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) -{ - ide_drive_t *drive; - ide_hwif_t *hwif; - struct request *rq; - ide_startstop_t startstop; - int loops = 0; + spin_lock_irq(&hwif->lock); - /* caller must own ide_lock */ - BUG_ON(!irqs_disabled()); + if (!ide_lock_port(hwif)) { + ide_hwif_t *prev_port; +repeat: + prev_port = hwif->host->cur_port; + hwif->rq = NULL; - while (!hwgroup->busy) { - hwgroup->busy = 1; - /* for atari only */ - ide_get_lock(ide_intr, hwgroup); - drive = choose_drive(hwgroup); - if (drive == NULL) { - int sleeping = 0; - unsigned long sleep = 0; /* shut up, gcc */ - hwgroup->rq = NULL; - drive = hwgroup->drive; - do { - if ((drive->dev_flags & IDE_DFLAG_SLEEPING) && - (sleeping == 0 || - time_before(drive->sleep, sleep))) { - sleeping = 1; - sleep = drive->sleep; - } - } while ((drive = drive->next) != hwgroup->drive); - if (sleeping) { - /* - * Take a short snooze, and then wake up this hwgroup again. - * This gives other hwgroups on the same a chance to - * play fairly with us, just in case there are big differences - * in relative throughputs.. don't want to hog the cpu too much. - */ - if (time_before(sleep, jiffies + WAIT_MIN_SLEEP)) - sleep = jiffies + WAIT_MIN_SLEEP; -#if 1 - if (timer_pending(&hwgroup->timer)) - printk(KERN_CRIT "ide_set_handler: timer already active\n"); -#endif - /* so that ide_timer_expiry knows what to do */ - hwgroup->sleeping = 1; - hwgroup->req_gen_timer = hwgroup->req_gen; - mod_timer(&hwgroup->timer, sleep); - /* we purposely leave hwgroup->busy==1 - * while sleeping */ - } else { - /* Ugly, but how can we sleep for the lock - * otherwise? perhaps from tq_disk? - */ - - /* for atari only */ - ide_release_lock(); - hwgroup->busy = 0; + if (drive->dev_flags & IDE_DFLAG_SLEEPING) { + if (time_before(drive->sleep, jiffies)) { + ide_unlock_port(hwif); + goto plug_device; } - - /* no more work for this hwgroup (for now) */ - return; } - again: - hwif = HWIF(drive); - if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif) { + + if ((hwif->host->host_flags & IDE_HFLAG_SERIALIZE) && + hwif != prev_port) { /* - * set nIEN for previous hwif, drives in the + * set nIEN for previous port, drives in the * quirk_list may not like intr setups/cleanups */ - if (drive->quirk_list != 1) - hwif->tp_ops->set_irq(hwif, 0); - } - hwgroup->hwif = hwif; - hwgroup->drive = drive; - drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED); - drive->service_start = jiffies; + if (prev_port && prev_port->cur_dev->quirk_list == 0) + prev_port->tp_ops->set_irq(prev_port, 0); - if (blk_queue_plugged(drive->queue)) { - printk(KERN_ERR "ide: huh? queue was plugged!\n"); - break; + hwif->host->cur_port = hwif; } + hwif->cur_dev = drive; + drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED); + spin_unlock_irq(&hwif->lock); + spin_lock_irq(q->queue_lock); /* * we know that the queue isn't empty, but this can happen * if the q->prep_rq_fn() decides to kill a request */ rq = elv_next_request(drive->queue); + spin_unlock_irq(q->queue_lock); + spin_lock_irq(&hwif->lock); + if (!rq) { - hwgroup->busy = 0; - break; + ide_unlock_port(hwif); + goto out; } /* @@ -1063,63 +781,50 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) * though. I hope that doesn't happen too much, hopefully not * unless the subdriver triggers such a thing in its own PM * state machine. - * - * We count how many times we loop here to make sure we service - * all drives in the hwgroup without looping for ever */ if ((drive->dev_flags & IDE_DFLAG_BLOCKED) && blk_pm_request(rq) == 0 && (rq->cmd_flags & REQ_PREEMPT) == 0) { - drive = drive->next ? drive->next : hwgroup->drive; - if (loops++ < 4 && !blk_queue_plugged(drive->queue)) - goto again; - /* We clear busy, there should be no pending ATA command at this point. */ - hwgroup->busy = 0; - break; + /* there should be no pending command at this point */ + ide_unlock_port(hwif); + goto plug_device; } - hwgroup->rq = rq; + hwif->rq = rq; - /* - * Some systems have trouble with IDE IRQs arriving while - * the driver is still setting things up. So, here we disable - * the IRQ used by this interface while the request is being started. - * This may look bad at first, but pretty much the same thing - * happens anyway when any interrupt comes in, IDE or otherwise - * -- the kernel masks the IRQ while it is being handled. - */ - if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq) - disable_irq_nosync(hwif->irq); - spin_unlock(&ide_lock); - local_irq_enable_in_hardirq(); - /* allow other IRQs while we start this request */ + spin_unlock_irq(&hwif->lock); startstop = start_request(drive, rq); - spin_lock_irq(&ide_lock); - if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq) - enable_irq(hwif->irq); - if (startstop == ide_stopped) - hwgroup->busy = 0; - } -} + spin_lock_irq(&hwif->lock); -/* - * Passes the stuff to ide_do_request - */ -void do_ide_request(struct request_queue *q) -{ - ide_drive_t *drive = q->queuedata; - - ide_do_request(HWGROUP(drive), IDE_NO_IRQ); + if (startstop == ide_stopped) + goto repeat; + } else + goto plug_device; +out: + spin_unlock_irq(&hwif->lock); + if (rq == NULL) + ide_unlock_host(host); + spin_lock_irq(q->queue_lock); + return; + +plug_device: + spin_unlock_irq(&hwif->lock); + ide_unlock_host(host); +plug_device_2: + spin_lock_irq(q->queue_lock); + + if (!elv_queue_empty(q)) + blk_plug_device(q); } /* - * un-busy the hwgroup etc, and clear any pending DMA status. we want to + * un-busy the port etc, and clear any pending DMA status. we want to * retry the current request in pio mode instead of risking tossing it * all away */ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { - ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *hwif = drive->hwif; struct request *rq; ide_startstop_t ret = ide_stopped; @@ -1147,15 +852,14 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) ide_dma_off_quietly(drive); /* - * un-busy drive etc (hwgroup->busy is cleared on return) and - * make sure request is sane + * un-busy drive etc and make sure request is sane */ - rq = HWGROUP(drive)->rq; + rq = hwif->rq; if (!rq) goto out; - HWGROUP(drive)->rq = NULL; + hwif->rq = NULL; rq->errors = 0; @@ -1170,9 +874,20 @@ out: return ret; } +static void ide_plug_device(ide_drive_t *drive) +{ + struct request_queue *q = drive->queue; + unsigned long flags; + + spin_lock_irqsave(q->queue_lock, flags); + if (!elv_queue_empty(q)) + blk_plug_device(q); + spin_unlock_irqrestore(q->queue_lock, flags); +} + /** * ide_timer_expiry - handle lack of an IDE interrupt - * @data: timer callback magic (hwgroup) + * @data: timer callback magic (hwif) * * An IDE command has timed out before the expected drive return * occurred. At this point we attempt to clean up the current @@ -1186,93 +901,87 @@ out: void ide_timer_expiry (unsigned long data) { - ide_hwgroup_t *hwgroup = (ide_hwgroup_t *) data; + ide_hwif_t *hwif = (ide_hwif_t *)data; + ide_drive_t *uninitialized_var(drive); ide_handler_t *handler; - ide_expiry_t *expiry; unsigned long flags; unsigned long wait = -1; + int plug_device = 0; - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&hwif->lock, flags); - if (((handler = hwgroup->handler) == NULL) || - (hwgroup->req_gen != hwgroup->req_gen_timer)) { + handler = hwif->handler; + + if (handler == NULL || hwif->req_gen != hwif->req_gen_timer) { /* * Either a marginal timeout occurred * (got the interrupt just as timer expired), * or we were "sleeping" to give other devices a chance. * Either way, we don't really want to complain about anything. */ - if (hwgroup->sleeping) { - hwgroup->sleeping = 0; - hwgroup->busy = 0; - } } else { - ide_drive_t *drive = hwgroup->drive; - if (!drive) { - printk(KERN_ERR "ide_timer_expiry: hwgroup->drive was NULL\n"); - hwgroup->handler = NULL; - } else { - ide_hwif_t *hwif; - ide_startstop_t startstop = ide_stopped; - if (!hwgroup->busy) { - hwgroup->busy = 1; /* paranoia */ - printk(KERN_ERR "%s: ide_timer_expiry: hwgroup->busy was 0 ??\n", drive->name); - } - if ((expiry = hwgroup->expiry) != NULL) { - /* continue */ - if ((wait = expiry(drive)) > 0) { - /* reset timer */ - hwgroup->timer.expires = jiffies + wait; - hwgroup->req_gen_timer = hwgroup->req_gen; - add_timer(&hwgroup->timer); - spin_unlock_irqrestore(&ide_lock, flags); - return; - } + ide_expiry_t *expiry = hwif->expiry; + ide_startstop_t startstop = ide_stopped; + + drive = hwif->cur_dev; + + if (expiry) { + wait = expiry(drive); + if (wait > 0) { /* continue */ + /* reset timer */ + hwif->timer.expires = jiffies + wait; + hwif->req_gen_timer = hwif->req_gen; + add_timer(&hwif->timer); + spin_unlock_irqrestore(&hwif->lock, flags); + return; } - hwgroup->handler = NULL; - /* - * We need to simulate a real interrupt when invoking - * the handler() function, which means we need to - * globally mask the specific IRQ: - */ - spin_unlock(&ide_lock); - hwif = HWIF(drive); - /* disable_irq_nosync ?? */ - disable_irq(hwif->irq); - /* local CPU only, - * as if we were handling an interrupt */ - local_irq_disable(); - if (hwgroup->polling) { - startstop = handler(drive); - } else if (drive_is_ready(drive)) { - if (drive->waiting_for_dma) - hwif->dma_ops->dma_lost_irq(drive); - (void)ide_ack_intr(hwif); - printk(KERN_WARNING "%s: lost interrupt\n", drive->name); - startstop = handler(drive); - } else { - if (drive->waiting_for_dma) { - startstop = ide_dma_timeout_retry(drive, wait); - } else - startstop = - ide_error(drive, "irq timeout", - hwif->tp_ops->read_status(hwif)); - } - drive->service_time = jiffies - drive->service_start; - spin_lock_irq(&ide_lock); - enable_irq(hwif->irq); - if (startstop == ide_stopped) - hwgroup->busy = 0; } + hwif->handler = NULL; + /* + * We need to simulate a real interrupt when invoking + * the handler() function, which means we need to + * globally mask the specific IRQ: + */ + spin_unlock(&hwif->lock); + /* disable_irq_nosync ?? */ + disable_irq(hwif->irq); + /* local CPU only, as if we were handling an interrupt */ + local_irq_disable(); + if (hwif->polling) { + startstop = handler(drive); + } else if (drive_is_ready(drive)) { + if (drive->waiting_for_dma) + hwif->dma_ops->dma_lost_irq(drive); + (void)ide_ack_intr(hwif); + printk(KERN_WARNING "%s: lost interrupt\n", + drive->name); + startstop = handler(drive); + } else { + if (drive->waiting_for_dma) + startstop = ide_dma_timeout_retry(drive, wait); + else + startstop = ide_error(drive, "irq timeout", + hwif->tp_ops->read_status(hwif)); + } + spin_lock_irq(&hwif->lock); + enable_irq(hwif->irq); + if (startstop == ide_stopped) { + ide_unlock_port(hwif); + plug_device = 1; + } + } + spin_unlock_irqrestore(&hwif->lock, flags); + + if (plug_device) { + ide_unlock_host(hwif->host); + ide_plug_device(drive); } - ide_do_request(hwgroup, IDE_NO_IRQ); - spin_unlock_irqrestore(&ide_lock, flags); } /** * unexpected_intr - handle an unexpected IDE interrupt * @irq: interrupt line - * @hwgroup: hwgroup being processed + * @hwif: port being processed * * There's nothing really useful we can do with an unexpected interrupt, * other than reading the status register (to clear it), and logging it. @@ -1296,52 +1005,38 @@ void ide_timer_expiry (unsigned long data) * before completing the issuance of any new drive command, so we will not * be accidentally invoked as a result of any valid command completion * interrupt. - * - * Note that we must walk the entire hwgroup here. We know which hwif - * is doing the current command, but we don't know which hwif burped - * mysteriously. */ - -static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup) -{ - u8 stat; - ide_hwif_t *hwif = hwgroup->hwif; - /* - * handle the unexpected interrupt - */ - do { - if (hwif->irq == irq) { - stat = hwif->tp_ops->read_status(hwif); - - if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) { - /* Try to not flood the console with msgs */ - static unsigned long last_msgtime, count; - ++count; - if (time_after(jiffies, last_msgtime + HZ)) { - last_msgtime = jiffies; - printk(KERN_ERR "%s%s: unexpected interrupt, " - "status=0x%02x, count=%ld\n", - hwif->name, - (hwif->next==hwgroup->hwif) ? "" : "(?)", stat, count); - } - } +static void unexpected_intr(int irq, ide_hwif_t *hwif) +{ + u8 stat = hwif->tp_ops->read_status(hwif); + + if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) { + /* Try to not flood the console with msgs */ + static unsigned long last_msgtime, count; + ++count; + + if (time_after(jiffies, last_msgtime + HZ)) { + last_msgtime = jiffies; + printk(KERN_ERR "%s: unexpected interrupt, " + "status=0x%02x, count=%ld\n", + hwif->name, stat, count); } - } while ((hwif = hwif->next) != hwgroup->hwif); + } } /** * ide_intr - default IDE interrupt handler * @irq: interrupt number - * @dev_id: hwif group + * @dev_id: hwif * @regs: unused weirdness from the kernel irq layer * * This is the default IRQ handler for the IDE layer. You should * not need to override it. If you do be aware it is subtle in * places * - * hwgroup->hwif is the interface in the group currently performing - * a command. hwgroup->drive is the drive and hwgroup->handler is + * hwif is the interface in the group currently performing + * a command. hwif->cur_dev is the drive and hwif->handler is * the IRQ handler to call. As we issue a command the handlers * step through multiple states, reassigning the handler to the * next step in the process. Unlike a smart SCSI controller IDE @@ -1352,27 +1047,32 @@ static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup) * * The handler eventually returns ide_stopped to indicate the * request completed. At this point we issue the next request - * on the hwgroup and the process begins again. + * on the port and the process begins again. */ - + irqreturn_t ide_intr (int irq, void *dev_id) { - unsigned long flags; - ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id; - ide_hwif_t *hwif; - ide_drive_t *drive; + ide_hwif_t *hwif = (ide_hwif_t *)dev_id; + ide_drive_t *uninitialized_var(drive); ide_handler_t *handler; + unsigned long flags; ide_startstop_t startstop; + irqreturn_t irq_ret = IRQ_NONE; + int plug_device = 0; - spin_lock_irqsave(&ide_lock, flags); - hwif = hwgroup->hwif; - - if (!ide_ack_intr(hwif)) { - spin_unlock_irqrestore(&ide_lock, flags); - return IRQ_NONE; + if (hwif->host->host_flags & IDE_HFLAG_SERIALIZE) { + if (hwif != hwif->host->cur_port) + goto out_early; } - if ((handler = hwgroup->handler) == NULL || hwgroup->polling) { + spin_lock_irqsave(&hwif->lock, flags); + + if (!ide_ack_intr(hwif)) + goto out; + + handler = hwif->handler; + + if (handler == NULL || hwif->polling) { /* * Not expecting an interrupt from this drive. * That means this could be: @@ -1396,7 +1096,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) * Probably not a shared PCI interrupt, * so we can safely try to do something about it: */ - unexpected_intr(irq, hwgroup); + unexpected_intr(irq, hwif); #ifdef CONFIG_BLK_DEV_IDEPCI } else { /* @@ -1406,21 +1106,12 @@ irqreturn_t ide_intr (int irq, void *dev_id) (void)hwif->tp_ops->read_status(hwif); #endif /* CONFIG_BLK_DEV_IDEPCI */ } - spin_unlock_irqrestore(&ide_lock, flags); - return IRQ_NONE; - } - drive = hwgroup->drive; - if (!drive) { - /* - * This should NEVER happen, and there isn't much - * we could do about it here. - * - * [Note - this can occur if the drive is hot unplugged] - */ - spin_unlock_irqrestore(&ide_lock, flags); - return IRQ_HANDLED; + goto out; } - if (!drive_is_ready(drive)) { + + drive = hwif->cur_dev; + + if (!drive_is_ready(drive)) /* * This happens regularly when we share a PCI IRQ with * another device. Unfortunately, it can also happen @@ -1428,17 +1119,12 @@ irqreturn_t ide_intr (int irq, void *dev_id) * their status register is up to date. Hopefully we have * enough advance overhead that the latter isn't a problem. */ - spin_unlock_irqrestore(&ide_lock, flags); - return IRQ_NONE; - } - if (!hwgroup->busy) { - hwgroup->busy = 1; /* paranoia */ - printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name); - } - hwgroup->handler = NULL; - hwgroup->req_gen++; - del_timer(&hwgroup->timer); - spin_unlock(&ide_lock); + goto out; + + hwif->handler = NULL; + hwif->req_gen++; + del_timer(&hwif->timer); + spin_unlock(&hwif->lock); if (hwif->port_ops && hwif->port_ops->clear_irq) hwif->port_ops->clear_irq(drive); @@ -1449,7 +1135,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) /* service this interrupt, may set handler for next interrupt */ startstop = handler(drive); - spin_lock_irq(&ide_lock); + spin_lock_irq(&hwif->lock); /* * Note that handler() may have set things up for another * interrupt to occur soon, but it cannot happen until @@ -1457,18 +1143,21 @@ irqreturn_t ide_intr (int irq, void *dev_id) * same irq as is currently being serviced here, and Linux * won't allow another of the same (on any CPU) until we return. */ - drive->service_time = jiffies - drive->service_start; if (startstop == ide_stopped) { - if (hwgroup->handler == NULL) { /* paranoia */ - hwgroup->busy = 0; - ide_do_request(hwgroup, hwif->irq); - } else { - printk(KERN_ERR "%s: ide_intr: huh? expected NULL handler " - "on exit\n", drive->name); - } + BUG_ON(hwif->handler); + ide_unlock_port(hwif); + plug_device = 1; } - spin_unlock_irqrestore(&ide_lock, flags); - return IRQ_HANDLED; + irq_ret = IRQ_HANDLED; +out: + spin_unlock_irqrestore(&hwif->lock, flags); +out_early: + if (plug_device) { + ide_unlock_host(hwif->host); + ide_plug_device(drive); + } + + return irq_ret; } /** @@ -1488,16 +1177,15 @@ irqreturn_t ide_intr (int irq, void *dev_id) void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq) { + struct request_queue *q = drive->queue; unsigned long flags; - ide_hwgroup_t *hwgroup = HWGROUP(drive); - spin_lock_irqsave(&ide_lock, flags); - hwgroup->rq = NULL; - __elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); - blk_start_queueing(drive->queue); - spin_unlock_irqrestore(&ide_lock, flags); -} + drive->hwif->rq = NULL; + spin_lock_irqsave(q->queue_lock, flags); + __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0); + spin_unlock_irqrestore(q->queue_lock, flags); +} EXPORT_SYMBOL(ide_do_drive_cmd); void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma) |