diff options
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/algos/i2c-algo-bit.c | 55 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-designware-master.c | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-designware-platdrv.c | 7 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 9 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-sh_mobile.c | 15 | ||||
-rw-r--r-- | drivers/i2c/i2c-core-base.c | 11 |
6 files changed, 58 insertions, 40 deletions
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 6ec65adaba49..c33dcfb87993 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -110,8 +110,8 @@ static int sclhi(struct i2c_algo_bit_data *adap) } #ifdef DEBUG if (jiffies != start && i2c_debug >= 3) - pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go " - "high\n", jiffies - start); + pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go high\n", + jiffies - start); #endif done: @@ -171,8 +171,9 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c) setsda(adap, sb); udelay((adap->udelay + 1) / 2); if (sclhi(adap) < 0) { /* timed out */ - bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, " - "timeout at bit #%d\n", (int)c, i); + bit_dbg(1, &i2c_adap->dev, + "i2c_outb: 0x%02x, timeout at bit #%d\n", + (int)c, i); return -ETIMEDOUT; } /* FIXME do arbitration here: @@ -185,8 +186,8 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c) } sdahi(adap); if (sclhi(adap) < 0) { /* timeout */ - bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, " - "timeout at ack\n", (int)c); + bit_dbg(1, &i2c_adap->dev, + "i2c_outb: 0x%02x, timeout at ack\n", (int)c); return -ETIMEDOUT; } @@ -215,8 +216,9 @@ static int i2c_inb(struct i2c_adapter *i2c_adap) sdahi(adap); for (i = 0; i < 8; i++) { if (sclhi(adap) < 0) { /* timeout */ - bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit " - "#%d\n", 7 - i); + bit_dbg(1, &i2c_adap->dev, + "i2c_inb: timeout at bit #%d\n", + 7 - i); return -ETIMEDOUT; } indata *= 2; @@ -265,8 +267,9 @@ static int test_bus(struct i2c_adapter *i2c_adap) goto bailout; } if (!scl) { - printk(KERN_WARNING "%s: SCL unexpected low " - "while pulling SDA low!\n", name); + printk(KERN_WARNING + "%s: SCL unexpected low while pulling SDA low!\n", + name); goto bailout; } @@ -278,8 +281,9 @@ static int test_bus(struct i2c_adapter *i2c_adap) goto bailout; } if (!scl) { - printk(KERN_WARNING "%s: SCL unexpected low " - "while pulling SDA high!\n", name); + printk(KERN_WARNING + "%s: SCL unexpected low while pulling SDA high!\n", + name); goto bailout; } @@ -291,8 +295,9 @@ static int test_bus(struct i2c_adapter *i2c_adap) goto bailout; } if (!sda) { - printk(KERN_WARNING "%s: SDA unexpected low " - "while pulling SCL low!\n", name); + printk(KERN_WARNING + "%s: SDA unexpected low while pulling SCL low!\n", + name); goto bailout; } @@ -304,8 +309,9 @@ static int test_bus(struct i2c_adapter *i2c_adap) goto bailout; } if (!sda) { - printk(KERN_WARNING "%s: SDA unexpected low " - "while pulling SCL high!\n", name); + printk(KERN_WARNING + "%s: SDA unexpected low while pulling SCL high!\n", + name); goto bailout; } @@ -352,8 +358,8 @@ static int try_address(struct i2c_adapter *i2c_adap, i2c_start(adap); } if (i && ret) - bit_dbg(1, &i2c_adap->dev, "Used %d tries to %s client at " - "0x%02x: %s\n", i + 1, + bit_dbg(1, &i2c_adap->dev, + "Used %d tries to %s client at 0x%02x: %s\n", i + 1, addr & 1 ? "read from" : "write to", addr >> 1, ret == 1 ? "success" : "failed, timeout?"); return ret; @@ -442,8 +448,9 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) { if (!(flags & I2C_M_NO_RD_ACK)) acknak(i2c_adap, 0); - dev_err(&i2c_adap->dev, "readbytes: invalid " - "block length (%d)\n", inval); + dev_err(&i2c_adap->dev, + "readbytes: invalid block length (%d)\n", + inval); return -EPROTO; } /* The original count value accounts for the extra @@ -506,8 +513,8 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) return -ENXIO; } if (flags & I2C_M_RD) { - bit_dbg(3, &i2c_adap->dev, "emitting repeated " - "start condition\n"); + bit_dbg(3, &i2c_adap->dev, + "emitting repeated start condition\n"); i2c_repstart(adap); /* okay, now switch into reading mode */ addr |= 0x01; @@ -564,8 +571,8 @@ static int bit_xfer(struct i2c_adapter *i2c_adap, } ret = bit_doAddress(i2c_adap, pmsg); if ((ret != 0) && !nak_ok) { - bit_dbg(1, &i2c_adap->dev, "NAK from " - "device addr 0x%02x msg #%d\n", + bit_dbg(1, &i2c_adap->dev, + "NAK from device addr 0x%02x msg #%d\n", msgs[i].addr, i); goto bailout; } diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index e18442b9973a..94d94b4a9a0d 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -708,7 +708,6 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) i2c_set_adapdata(adap, dev); if (dev->pm_disabled) { - dev_pm_syscore_device(dev->dev, true); irq_flags = IRQF_NO_SUSPEND; } else { irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 1a8d2da5b000..b5750fd85125 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -434,6 +434,9 @@ static int dw_i2c_plat_suspend(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); + if (i_dev->pm_disabled) + return 0; + i_dev->disable(i_dev); i2c_dw_prepare_clk(i_dev, false); @@ -444,7 +447,9 @@ static int dw_i2c_plat_resume(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - i2c_dw_prepare_clk(i_dev, true); + if (!i_dev->pm_disabled) + i2c_dw_prepare_clk(i_dev, true); + i_dev->init(i_dev); return 0; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 941c223f6491..04b60a349d7e 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1415,6 +1415,13 @@ static void i801_add_tco(struct i801_priv *priv) } #ifdef CONFIG_ACPI +static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv, + acpi_physical_address address) +{ + return address >= priv->smba && + address <= pci_resource_end(priv->pci_dev, SMBBAR); +} + static acpi_status i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, u64 *value, void *handler_context, void *region_context) @@ -1430,7 +1437,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, */ mutex_lock(&priv->acpi_lock); - if (!priv->acpi_reserved) { + if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) { priv->acpi_reserved = true; dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n"); diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 439e8778f849..818cab14e87c 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -507,8 +507,6 @@ static void sh_mobile_i2c_dma_callback(void *data) pd->pos = pd->msg->len; pd->stop_after_dma = true; - i2c_release_dma_safe_msg_buf(pd->msg, pd->dma_buf); - iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE); } @@ -602,8 +600,8 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd) dma_async_issue_pending(chan); } -static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg, - bool do_init) +static void start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg, + bool do_init) { if (do_init) { /* Initialize channel registers */ @@ -627,7 +625,6 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg, /* Enable all interrupts to begin with */ iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); - return 0; } static int poll_dte(struct sh_mobile_i2c_data *pd) @@ -698,9 +695,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP; pd->stop_after_dma = false; - err = start_ch(pd, msg, do_start); - if (err) - break; + start_ch(pd, msg, do_start); if (do_start) i2c_op(pd, OP_START, 0); @@ -709,6 +704,10 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, timeout = wait_event_timeout(pd->wait, pd->sr & (ICSR_TACK | SW_DONE), adapter->timeout); + + /* 'stop_after_dma' tells if DMA transfer was complete */ + i2c_put_dma_safe_msg_buf(pd->dma_buf, pd->msg, pd->stop_after_dma); + if (!timeout) { dev_err(pd->dev, "Transfer request timed out\n"); if (pd->dma_direction != DMA_NONE) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index f15737763608..9ee9a15e7134 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -2293,21 +2293,22 @@ u8 *i2c_get_dma_safe_msg_buf(struct i2c_msg *msg, unsigned int threshold) EXPORT_SYMBOL_GPL(i2c_get_dma_safe_msg_buf); /** - * i2c_release_dma_safe_msg_buf - release DMA safe buffer and sync with i2c_msg - * @msg: the message to be synced with + * i2c_put_dma_safe_msg_buf - release DMA safe buffer and sync with i2c_msg * @buf: the buffer obtained from i2c_get_dma_safe_msg_buf(). May be NULL. + * @msg: the message which the buffer corresponds to + * @xferred: bool saying if the message was transferred */ -void i2c_release_dma_safe_msg_buf(struct i2c_msg *msg, u8 *buf) +void i2c_put_dma_safe_msg_buf(u8 *buf, struct i2c_msg *msg, bool xferred) { if (!buf || buf == msg->buf) return; - if (msg->flags & I2C_M_RD) + if (xferred && msg->flags & I2C_M_RD) memcpy(msg->buf, buf, msg->len); kfree(buf); } -EXPORT_SYMBOL_GPL(i2c_release_dma_safe_msg_buf); +EXPORT_SYMBOL_GPL(i2c_put_dma_safe_msg_buf); MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>"); MODULE_DESCRIPTION("I2C-Bus main module"); |