summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig14
-rw-r--r--drivers/i2c/algos/Kconfig11
-rw-r--r--drivers/i2c/busses/i2c-acorn.c2
-rw-r--r--drivers/i2c/busses/i2c-amd756-s4882.c9
-rw-r--r--drivers/i2c/busses/i2c-at91.c7
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c35
-rw-r--r--drivers/i2c/busses/i2c-davinci.c5
-rw-r--r--drivers/i2c/busses/i2c-gpio.c9
-rw-r--r--drivers/i2c/busses/i2c-ixp2000.c4
-rw-r--r--drivers/i2c/busses/i2c-nforce2-s4985.c5
-rw-r--r--drivers/i2c/busses/i2c-pnx.c2
-rw-r--r--drivers/i2c/busses/i2c-pxa.c6
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c133
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c271
-rw-r--r--drivers/i2c/chips/Kconfig2
-rw-r--r--drivers/i2c/chips/at24.c8
-rw-r--r--drivers/i2c/chips/isp1301_omap.c6
-rw-r--r--drivers/i2c/chips/menelaus.c5
-rw-r--r--drivers/i2c/chips/tps65010.c2
-rw-r--r--drivers/i2c/i2c-core.c29
-rw-r--r--drivers/i2c/i2c-dev.c4
21 files changed, 428 insertions, 141 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 96867347bcbf..711ca08ab776 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -38,6 +38,20 @@ config I2C_CHARDEV
This support is also available as a module. If so, the module
will be called i2c-dev.
+config I2C_HELPER_AUTO
+ bool "Autoselect pertinent helper modules"
+ default y
+ help
+ Some I2C bus drivers require so-called "I2C algorithm" modules
+ to work. These are basically software-only abstractions of generic
+ I2C interfaces. This option will autoselect them so that you don't
+ have to care.
+
+ Unselect this only if you need to enable additional helper
+ modules, for example for use with external I2C bus drivers.
+
+ In doubt, say Y.
+
source drivers/i2c/algos/Kconfig
source drivers/i2c/busses/Kconfig
source drivers/i2c/chips/Kconfig
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 7137a17402fe..b788579b8227 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -2,15 +2,20 @@
# I2C algorithm drivers configuration
#
+menu "I2C Algorithms"
+ depends on !I2C_HELPER_AUTO
+
config I2C_ALGOBIT
- tristate
+ tristate "I2C bit-banging interfaces"
config I2C_ALGOPCF
- tristate
+ tristate "I2C PCF 8584 interfaces"
config I2C_ALGOPCA
- tristate
+ tristate "I2C PCA 9564 interfaces"
config I2C_ALGO_SGI
tristate
depends on SGI_IP22 || SGI_IP32 || X86_VISWS
+
+endmenu
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 7c2be3558a24..75089febbc13 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -16,7 +16,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/hardware/ioc.h>
#include <asm/system.h>
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 72872d1e63ef..8ba2bcf727d3 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -155,6 +155,9 @@ static int __init amd756_s4882_init(void)
int i, error;
union i2c_smbus_data ioconfig;
+ if (!amd756_smbus.dev.parent)
+ return -ENODEV;
+
/* Configure the PCA9556 multiplexer */
ioconfig.byte = 0x00; /* All I/O to output mode */
error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -168,11 +171,7 @@ static int __init amd756_s4882_init(void)
/* Unregister physical bus */
error = i2c_del_adapter(&amd756_smbus);
if (error) {
- if (error == -EINVAL)
- error = -ENODEV;
- else
- dev_err(&amd756_smbus.dev, "Physical bus removal "
- "failed\n");
+ dev_err(&amd756_smbus.dev, "Physical bus removal failed\n");
goto ERROR0;
}
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 73d61946a534..9efb02137254 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -14,7 +14,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -27,9 +26,9 @@
#include <asm/io.h>
-#include <asm/arch/at91_twi.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_twi.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 48d084bdf7c8..3c855ff2992f 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -49,6 +49,8 @@ struct bfin_twi_iface {
struct i2c_msg *pmsg;
int msg_num;
int cur_msg;
+ u16 saved_clkdiv;
+ u16 saved_control;
void __iomem *regs_base;
};
@@ -565,32 +567,43 @@ static u32 bfin_twi_functionality(struct i2c_adapter *adap)
I2C_FUNC_I2C;
}
-
static struct i2c_algorithm bfin_twi_algorithm = {
.master_xfer = bfin_twi_master_xfer,
.smbus_xfer = bfin_twi_smbus_xfer,
.functionality = bfin_twi_functionality,
};
-
-static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state)
+static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct bfin_twi_iface *iface = platform_get_drvdata(dev);
+ struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+
+ iface->saved_clkdiv = read_CLKDIV(iface);
+ iface->saved_control = read_CONTROL(iface);
+
+ free_irq(iface->irq, iface);
/* Disable TWI */
- write_CONTROL(iface, read_CONTROL(iface) & ~TWI_ENA);
- SSYNC();
+ write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
return 0;
}
-static int i2c_bfin_twi_resume(struct platform_device *dev)
+static int i2c_bfin_twi_resume(struct platform_device *pdev)
{
- struct bfin_twi_iface *iface = platform_get_drvdata(dev);
+ struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
- /* Enable TWI */
- write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
- SSYNC();
+ int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+ IRQF_DISABLED, pdev->name, iface);
+ if (rc) {
+ dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
+ return -ENODEV;
+ }
+
+ /* Resume TWI interface clock as specified */
+ write_CLKDIV(iface, iface->saved_clkdiv);
+
+ /* Resume TWI */
+ write_CONTROL(iface, iface->saved_control);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index af3846eda985..5d7789834b95 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,10 +36,9 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
-#include <asm/arch/i2c.h>
+#include <mach/i2c.h>
/* ----- global defines ----------------------------------------------- */
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 79b455a1f090..32104eac8d3d 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -77,7 +77,7 @@ static int i2c_gpio_getscl(void *data)
return gpio_get_value(pdata->scl_pin);
}
-static int __init i2c_gpio_probe(struct platform_device *pdev)
+static int __devinit i2c_gpio_probe(struct platform_device *pdev)
{
struct i2c_gpio_platform_data *pdata;
struct i2c_algo_bit_data *bit_data;
@@ -174,7 +174,7 @@ err_alloc_adap:
return ret;
}
-static int __exit i2c_gpio_remove(struct platform_device *pdev)
+static int __devexit i2c_gpio_remove(struct platform_device *pdev)
{
struct i2c_gpio_platform_data *pdata;
struct i2c_adapter *adap;
@@ -196,14 +196,15 @@ static struct platform_driver i2c_gpio_driver = {
.name = "i2c-gpio",
.owner = THIS_MODULE,
},
- .remove = __exit_p(i2c_gpio_remove),
+ .probe = i2c_gpio_probe,
+ .remove = __devexit_p(i2c_gpio_remove),
};
static int __init i2c_gpio_init(void)
{
int ret;
- ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
+ ret = platform_driver_register(&i2c_gpio_driver);
if (ret)
printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5af9e6521e6c..05d72e981353 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,8 +33,8 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <asm/hardware.h> /* Pick up IXP2000-specific bits */
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
+#include <mach/gpio.h>
static inline int ixp2000_scl_pin(void *data)
{
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index d1a4cbcf2aa4..29015eb9ca46 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -150,6 +150,9 @@ static int __init nforce2_s4985_init(void)
int i, error;
union i2c_smbus_data ioconfig;
+ if (!nforce2_smbus)
+ return -ENODEV;
+
/* Configure the PCA9556 multiplexer */
ioconfig.byte = 0x00; /* All I/O to output mode */
error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -161,8 +164,6 @@ static int __init nforce2_s4985_init(void)
}
/* Unregister physical bus */
- if (!nforce2_smbus)
- return -ENODEV;
error = i2c_del_adapter(nforce2_smbus);
if (error) {
dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n");
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 1ca21084ffcf..ec15cff556b9 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -19,7 +19,7 @@
#include <linux/completion.h>
#include <linux/platform_device.h>
#include <linux/i2c-pnx.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index af9e6034d7fb..44d838410f15 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,11 +34,11 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/i2c.h>
+#include <mach/pxa-regs.h>
struct pxa_i2c {
spinlock_t lock;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 007390ad9810..c772e02c2803 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -33,12 +33,13 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-iic.h>
#include <asm/plat-s3c/iic.h>
@@ -64,6 +65,7 @@ struct s3c24xx_i2c {
unsigned int tx_setup;
enum s3c24xx_i2c_state state;
+ unsigned long clkrate;
void __iomem *regs;
struct clk *clk;
@@ -71,6 +73,10 @@ struct s3c24xx_i2c {
struct resource *irq;
struct resource *ioarea;
struct i2c_adapter adap;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
};
/* default platform data to use if not supplied in the platform_device
@@ -501,6 +507,9 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
unsigned long timeout;
int ret;
+ if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)
+ return -EIO;
+
ret = s3c24xx_i2c_set_master(i2c);
if (ret != 0) {
dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
@@ -636,27 +645,28 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
return (diff >= -2 && diff <= 2);
}
-/* s3c24xx_i2c_getdivisor
+/* s3c24xx_i2c_clockrate
*
* work out a divisor for the user requested frequency setting,
* either by the requested frequency, or scanning the acceptable
* range of frequencies until something is found
*/
-static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
- struct s3c2410_platform_i2c *pdata,
- unsigned long *iicon,
- unsigned int *got)
+static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
{
+ struct s3c2410_platform_i2c *pdata;
unsigned long clkin = clk_get_rate(i2c->clk);
-
unsigned int divs, div1;
+ u32 iiccon;
int freq;
int start, end;
+ i2c->clkrate = clkin;
+
+ pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
clkin /= 1000; /* clkin now in KHz */
- dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
+ dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
if (pdata->bus_freq != 0) {
@@ -688,11 +698,79 @@ static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
found:
*got = freq;
- *iicon |= (divs-1);
- *iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0;
+
+ iiccon = readl(i2c->regs + S3C2410_IICCON);
+ iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
+ iiccon |= (divs-1);
+
+ if (div1 == 512)
+ iiccon |= S3C2410_IICCON_TXDIV_512;
+
+ writel(iiccon, i2c->regs + S3C2410_IICCON);
+
+ return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
+
+static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
+ unsigned long flags;
+ unsigned int got;
+ int delta_f;
+ int ret;
+
+ delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
+
+ /* if we're post-change and the input clock has slowed down
+ * or at pre-change and the clock is about to speed up, then
+ * adjust our clock rate. <0 is slow, >0 speedup.
+ */
+
+ if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
+ (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
+ spin_lock_irqsave(&i2c->lock, flags);
+ ret = s3c24xx_i2c_clockrate(i2c, &got);
+ spin_unlock_irqrestore(&i2c->lock, flags);
+
+ if (ret < 0)
+ dev_err(i2c->dev, "cannot find frequency\n");
+ else
+ dev_info(i2c->dev, "setting freq %d\n", got);
+ }
+
+ return 0;
+}
+
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
+ i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
+
+ return cpufreq_register_notifier(&i2c->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+ cpufreq_unregister_notifier(&i2c->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
return 0;
}
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
/* s3c24xx_i2c_init
*
* initialise the controller, set the IO lines and frequency
@@ -719,9 +797,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
+ writel(iicon, i2c->regs + S3C2410_IICCON);
+
/* we need to work out the divisors for the clock... */
- if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) {
+ if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
+ writel(0, i2c->regs + S3C2410_IICCON);
dev_err(i2c->dev, "cannot meet bus frequency required\n");
return -EINVAL;
}
@@ -730,8 +811,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
-
- writel(iicon, i2c->regs + S3C2410_IICCON);
/* check for s3c2440 i2c controller */
@@ -752,9 +831,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
+ struct s3c2410_platform_i2c *pdata;
struct resource *res;
int ret;
+ pdata = s3c24xx_i2c_get_platformdata(&pdev->dev);
+
/* find the clock and enable it */
i2c->dev = &pdev->dev;
@@ -832,17 +914,34 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
(unsigned long)res->start);
- ret = i2c_add_adapter(&i2c->adap);
+ ret = s3c24xx_i2c_register_cpufreq(i2c);
if (ret < 0) {
- dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
goto err_irq;
}
+ /* Note, previous versions of the driver used i2c_add_adapter()
+ * to add the bus at any number. We now pass the bus number via
+ * the platform data, so if unset it will now default to always
+ * being bus 0.
+ */
+
+ i2c->adap.nr = pdata->bus_num;
+
+ ret = i2c_add_numbered_adapter(&i2c->adap);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ goto err_cpufreq;
+ }
+
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
return 0;
+ err_cpufreq:
+ s3c24xx_i2c_deregister_cpufreq(i2c);
+
err_irq:
free_irq(i2c->irq->start, i2c);
@@ -870,6 +969,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
+ s3c24xx_i2c_deregister_cpufreq(i2c);
+
i2c_del_adapter(&i2c->adap);
free_irq(i2c->irq->start, i2c);
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 840e634fa31f..640cbb237328 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -31,13 +31,84 @@
#include <linux/clk.h>
#include <linux/io.h>
+/* Transmit operation: */
+/* */
+/* 0 byte transmit */
+/* BUS: S A8 ACK P */
+/* IRQ: DTE WAIT */
+/* ICIC: */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 */
+/* */
+/* 1 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK P */
+/* IRQ: DTE WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) */
+/* */
+/* 2 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) D8(2) */
+/* */
+/* 3 bytes or more, +---------+ gets repeated */
+/* */
+/* */
+/* Receive operation: */
+/* */
+/* 0 byte receive - not supported since slave may hold SDA low */
+/* */
+/* 1 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK P */
+/* IRQ: DTE WAIT | WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) */
+/* */
+/* 2 byte receive [TX]| [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) */
+/* */
+/* 3 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) D8(3) */
+/* */
+/* 4 bytes or more, this part is repeated +---------+ */
+/* */
+/* */
+/* Interrupt order and BUSY flag */
+/* ___ _ */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
+/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
+/* */
+/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
+/* ___ */
+/* WAIT IRQ ________________________________/ \___________ */
+/* TACK IRQ ____________________________________/ \_______ */
+/* DTE IRQ __________________________________________/ \_ */
+/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
+/* _______________________________________________ */
+/* BUSY __/ \_ */
+/* */
+
enum sh_mobile_i2c_op {
OP_START = 0,
- OP_TX_ONLY,
+ OP_TX_FIRST,
+ OP_TX,
OP_TX_STOP,
OP_TX_TO_RX,
- OP_RX_ONLY,
+ OP_RX,
OP_RX_STOP,
+ OP_RX_STOP_DATA,
};
struct sh_mobile_i2c_data {
@@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
spin_lock_irqsave(&pd->lock, flags);
switch (op) {
- case OP_START:
+ case OP_START: /* issue start and trigger DTE interrupt */
iowrite8(0x94, ICCR(pd));
break;
- case OP_TX_ONLY:
+ case OP_TX_FIRST: /* disable DTE interrupt and write data */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
iowrite8(data, ICDR(pd));
break;
- case OP_TX_STOP:
+ case OP_TX: /* write data */
iowrite8(data, ICDR(pd));
- iowrite8(0x90, ICCR(pd));
- iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
break;
- case OP_TX_TO_RX:
+ case OP_TX_STOP: /* write data and issue a stop afterwards */
iowrite8(data, ICDR(pd));
+ iowrite8(0x90, ICCR(pd));
+ break;
+ case OP_TX_TO_RX: /* select read mode */
iowrite8(0x81, ICCR(pd));
break;
- case OP_RX_ONLY:
+ case OP_RX: /* just read data */
ret = ioread8(ICDR(pd));
break;
- case OP_RX_STOP:
+ case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
+ iowrite8(0xc0, ICCR(pd));
+ break;
+ case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
ret = ioread8(ICDR(pd));
iowrite8(0xc0, ICCR(pd));
break;
@@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
return ret;
}
+static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == -1)
+ return 1;
+
+ return 0;
+}
+
+static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == (pd->msg->len - 1))
+ return 1;
+
+ return 0;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+ unsigned char *buf)
+{
+ switch (pd->pos) {
+ case -1:
+ *buf = (pd->msg->addr & 0x7f) << 1;
+ *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+ break;
+ default:
+ *buf = pd->msg->buf[pd->pos];
+ }
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+
+ if (pd->pos == pd->msg->len)
+ return 1;
+
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_last_byte(pd))
+ i2c_op(pd, OP_TX_STOP, data);
+ else if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+
+ pd->pos++;
+ return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+ int real_pos;
+
+ do {
+ if (pd->pos <= -1) {
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+ break;
+ }
+
+ if (pd->pos == 0) {
+ i2c_op(pd, OP_TX_TO_RX, 0);
+ break;
+ }
+
+ real_pos = pd->pos - 2;
+
+ if (pd->pos == pd->msg->len) {
+ if (real_pos < 0) {
+ i2c_op(pd, OP_RX_STOP, 0);
+ break;
+ }
+ data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+ } else
+ data = i2c_op(pd, OP_RX, 0);
+
+ pd->msg->buf[real_pos] = data;
+ } while (0);
+
+ pd->pos++;
+ return pd->pos == (pd->msg->len + 2);
+}
+
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
{
struct platform_device *dev = dev_id;
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
- struct i2c_msg *msg = pd->msg;
- unsigned char data, sr;
- int wakeup = 0;
+ unsigned char sr;
+ int wakeup;
sr = ioread8(ICSR(pd));
- pd->sr |= sr;
+ pd->sr |= sr; /* remember state */
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
- (msg->flags & I2C_M_RD) ? "read" : "write",
- pd->pos, msg->len);
+ (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+ pd->pos, pd->msg->len);
if (sr & (ICSR_AL | ICSR_TACK)) {
- iowrite8(0, ICIC(pd)); /* disable interrupts */
- wakeup = 1;
- goto do_wakeup;
- }
+ /* don't interrupt transaction - continue to issue stop */
+ iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+ wakeup = 0;
+ } else if (pd->msg->flags & I2C_M_RD)
+ wakeup = sh_mobile_i2c_isr_rx(pd);
+ else
+ wakeup = sh_mobile_i2c_isr_tx(pd);
- if (pd->pos == msg->len) {
- i2c_op(pd, OP_RX_ONLY, 0);
- wakeup = 1;
- goto do_wakeup;
- }
+ if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+ iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
- if (pd->pos == -1) {
- data = (msg->addr & 0x7f) << 1;
- data |= (msg->flags & I2C_M_RD) ? 1 : 0;
- } else
- data = msg->buf[pd->pos];
-
- if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
- if (msg->flags & I2C_M_RD)
- i2c_op(pd, OP_TX_TO_RX, data);
- else if (pd->pos == (msg->len - 1)) {
- i2c_op(pd, OP_TX_STOP, data);
- wakeup = 1;
- } else
- i2c_op(pd, OP_TX_ONLY, data);
- } else {
- if (pd->pos == (msg->len - 1))
- data = i2c_op(pd, OP_RX_STOP, 0);
- else
- data = i2c_op(pd, OP_RX_ONLY, 0);
-
- msg->buf[pd->pos] = data;
- }
- pd->pos++;
-
- do_wakeup:
if (wakeup) {
pd->sr |= SW_DONE;
wake_up(&pd->wait);
@@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
{
+ if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+ dev_err(pd->dev, "Unsupported zero length i2c read\n");
+ return -EIO;
+ }
+
/* Initialize channel registers */
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
@@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
pd->pos = -1;
pd->sr = 0;
- /* Enable all interrupts except wait */
- iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
- ICIC(pd));
+ /* Enable all interrupts to begin with */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
return 0;
}
@@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
if (!k)
dev_err(pd->dev, "Transfer request timed out\n");
- retry_count = 10;
+ retry_count = 1000;
again:
val = ioread8(ICSR(pd));
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
- if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
- err = -EIO;
- break;
- }
-
/* the interrupt handler may wake us up before the
* transfer is finished, so poll the hardware
* until we're done.
*/
-
- if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
- (val & ICSR_SDAM))) {
- msleep(1);
+ if (val & ICSR_BUSY) {
+ udelay(10);
if (retry_count--)
goto again;
@@ -294,6 +433,12 @@ again:
dev_err(pd->dev, "Polling timed out\n");
break;
}
+
+ /* handle missing acknowledge and arbitration lost */
+ if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
+ err = -EIO;
+ break;
+ }
}
deactivate_ch(pd);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 50e0a4653741..a95cb9465d65 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,7 +126,7 @@ config ISP1301_OMAP
config TPS65010
tristate "TPS6501x Power Management chips"
- depends on HAVE_GPIO_LIB
+ depends on GPIOLIB
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes here you get support for the TPS6501x series of
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
index e764c94f3e3d..2a4acb269569 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/i2c/chips/at24.c
@@ -188,7 +188,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
count = I2C_SMBUS_BLOCK_MAX;
status = i2c_smbus_read_i2c_block_data(client, offset,
count, buf);
- dev_dbg(&client->dev, "smbus read %zd@%d --> %d\n",
+ dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
count, offset, status);
return (status < 0) ? -EIO : status;
}
@@ -214,7 +214,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
msg[1].len = count;
status = i2c_transfer(client->adapter, msg, 2);
- dev_dbg(&client->dev, "i2c read %zd@%d --> %d\n",
+ dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
count, offset, status);
if (status == 2)
@@ -334,7 +334,7 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
if (status == 1)
status = count;
}
- dev_dbg(&client->dev, "write %zd@%d --> %zd (%ld)\n",
+ dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
count, offset, status, jiffies);
if (status == count)
@@ -512,7 +512,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
i2c_set_clientdata(client, at24);
- dev_info(&client->dev, "%Zd byte %s EEPROM %s\n",
+ dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
at24->bin.size, client->name,
writable ? "(writable)" : "(read-only)");
dev_dbg(&client->dev,
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 03a33f1b9cd3..4655b794ebe3 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -33,7 +33,7 @@
#include <linux/workqueue.h>
#include <asm/irq.h>
-#include <asm/arch/usb.h>
+#include <mach/usb.h>
#ifndef DEBUG
@@ -94,7 +94,7 @@ struct isp1301 {
/* board-specific PM hooks */
#include <asm/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
#include <asm/mach-types.h>
@@ -1593,7 +1593,7 @@ fail1:
if (machine_is_omap_h2()) {
/* full speed signaling by default */
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
- MC1_SPEED_REG);
+ MC1_SPEED);
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
MC2_SPD_SUSP_CTRL);
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index b36db1797c11..176126d3a01d 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -41,11 +41,10 @@
#include <linux/rtc.h>
#include <linux/bcd.h>
-#include <asm/mach-types.h>
#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
#define DRIVER_NAME "menelaus"
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 85949685191b..cf02e8fceb42 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -636,6 +636,8 @@ static int tps65010_probe(struct i2c_client *client,
tps->outmask = board->outmask;
tps->chip.label = client->name;
+ tps->chip.dev = &client->dev;
+ tps->chip.owner = THIS_MODULE;
tps->chip.set = tps65010_gpio_set;
tps->chip.direction_output = tps65010_output;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7bf38c418086..b346a687ab59 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -108,6 +108,9 @@ static int i2c_device_probe(struct device *dev)
if (!driver->probe || !driver->id_table)
return -ENODEV;
client->driver = driver;
+ if (!device_can_wakeup(&client->dev))
+ device_init_wakeup(&client->dev,
+ client->flags & I2C_CLIENT_WAKE);
dev_dbg(dev, "probe\n");
status = driver->probe(client, i2c_match_id(driver->id_table, client));
@@ -262,9 +265,8 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
client->adapter = adap;
client->dev.platform_data = info->platform_data;
- device_init_wakeup(&client->dev, info->flags & I2C_CLIENT_WAKE);
- client->flags = info->flags & ~I2C_CLIENT_WAKE;
+ client->flags = info->flags;
client->addr = info->addr;
client->irq = info->irq;
@@ -813,7 +815,12 @@ static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
int i2c_attach_client(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
- int res = 0;
+ int res;
+
+ /* Check for address business */
+ res = i2c_check_addr(adapter, client->addr);
+ if (res)
+ return res;
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
@@ -1183,8 +1190,8 @@ int i2c_probe(struct i2c_adapter *adapter,
&& address_data->normal_i2c[0] == I2C_CLIENT_END)
return 0;
- dev_warn(&adapter->dev, "SMBus Quick command not supported, "
- "can't probe for chips\n");
+ dev_dbg(&adapter->dev, "SMBus Quick command not supported, "
+ "can't probe for chips\n");
return -EOPNOTSUPP;
}
@@ -1345,6 +1352,10 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
}
}
+ /* Stop here if the classes do not match */
+ if (!(adapter->class & driver->class))
+ goto exit_free;
+
/* Stop here if we can't use SMBUS_QUICK */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
if (address_data->probe[0] == I2C_CLIENT_END
@@ -1357,10 +1368,6 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
goto exit_free;
}
- /* Stop here if the classes do not match */
- if (!(adapter->class & driver->class))
- goto exit_free;
-
/* Probe entries are done second, and are not affected by ignore
entries either */
for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
@@ -1451,9 +1458,11 @@ i2c_new_probed_device(struct i2c_adapter *adap,
if ((addr_list[i] & ~0x07) == 0x30
|| (addr_list[i] & ~0x0f) == 0x50
|| !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
+ union i2c_smbus_data data;
+
if (i2c_smbus_xfer(adap, addr_list[i], 0,
I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE, NULL) >= 0)
+ I2C_SMBUS_BYTE, &data) >= 0)
break;
} else {
if (i2c_smbus_xfer(adap, addr_list[i], 0,
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 9d55c6383b23..af4491fa7e34 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
if (tmp==NULL)
return -ENOMEM;
- pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n",
+ pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n",
iminor(file->f_path.dentry->d_inode), count);
ret = i2c_master_recv(client,tmp,count);
@@ -175,7 +175,7 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c
return -EFAULT;
}
- pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n",
+ pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
iminor(file->f_path.dentry->d_inode), count);
ret = i2c_master_send(client,tmp,count);
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-25 07:26:57 +0000