diff options
Diffstat (limited to 'drivers/hwmon/lm77.c')
| -rw-r--r-- | drivers/hwmon/lm77.c | 173 |
1 files changed, 81 insertions, 92 deletions
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index 642216285814..4cd8a513c47b 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -57,36 +57,6 @@ struct lm77_data { u8 alarms; }; -static int lm77_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int lm77_detect(struct i2c_client *client, struct i2c_board_info *info); -static void lm77_init_client(struct i2c_client *client); -static int lm77_remove(struct i2c_client *client); -static u16 lm77_read_value(struct i2c_client *client, u8 reg); -static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value); - -static struct lm77_data *lm77_update_device(struct device *dev); - - -static const struct i2c_device_id lm77_id[] = { - { "lm77", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, lm77_id); - -/* This is the driver that will be inserted */ -static struct i2c_driver lm77_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "lm77", - }, - .probe = lm77_probe, - .remove = lm77_remove, - .id_table = lm77_id, - .detect = lm77_detect, - .address_list = normal_i2c, -}; - /* straight from the datasheet */ #define LM77_TEMP_MIN (-55000) #define LM77_TEMP_MAX 125000 @@ -106,6 +76,62 @@ static inline int LM77_TEMP_FROM_REG(s16 reg) return (reg / 8) * 500; } +/* + * All registers are word-sized, except for the configuration register. + * The LM77 uses the high-byte first convention. + */ +static u16 lm77_read_value(struct i2c_client *client, u8 reg) +{ + if (reg == LM77_REG_CONF) + return i2c_smbus_read_byte_data(client, reg); + else + return i2c_smbus_read_word_swapped(client, reg); +} + +static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if (reg == LM77_REG_CONF) + return i2c_smbus_write_byte_data(client, reg, value); + else + return i2c_smbus_write_word_swapped(client, reg, value); +} + +static struct lm77_data *lm77_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm77_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Starting lm77 update\n"); + data->temp_input = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP)); + data->temp_hyst = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP_HYST)); + data->temp_crit = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP_CRIT)); + data->temp_min = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP_MIN)); + data->temp_max = + LM77_TEMP_FROM_REG(lm77_read_value(client, + LM77_REG_TEMP_MAX)); + data->alarms = + lm77_read_value(client, LM77_REG_TEMP) & 0x0007; + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + /* sysfs stuff */ /* read routines for temperature limits */ @@ -333,6 +359,14 @@ static int lm77_detect(struct i2c_client *client, struct i2c_board_info *info) return 0; } +static void lm77_init_client(struct i2c_client *client) +{ + /* Initialize the LM77 chip - turn off shutdown mode */ + int conf = lm77_read_value(client, LM77_REG_CONF); + if (conf & 1) + lm77_write_value(client, LM77_REG_CONF, conf & 0xfe); +} + static int lm77_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; @@ -375,69 +409,24 @@ static int lm77_remove(struct i2c_client *client) return 0; } -/* - * All registers are word-sized, except for the configuration register. - * The LM77 uses the high-byte first convention. - */ -static u16 lm77_read_value(struct i2c_client *client, u8 reg) -{ - if (reg == LM77_REG_CONF) - return i2c_smbus_read_byte_data(client, reg); - else - return i2c_smbus_read_word_swapped(client, reg); -} - -static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if (reg == LM77_REG_CONF) - return i2c_smbus_write_byte_data(client, reg, value); - else - return i2c_smbus_write_word_swapped(client, reg, value); -} - -static void lm77_init_client(struct i2c_client *client) -{ - /* Initialize the LM77 chip - turn off shutdown mode */ - int conf = lm77_read_value(client, LM77_REG_CONF); - if (conf & 1) - lm77_write_value(client, LM77_REG_CONF, conf & 0xfe); -} - -static struct lm77_data *lm77_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm77_data *data = i2c_get_clientdata(client); - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - dev_dbg(&client->dev, "Starting lm77 update\n"); - data->temp_input = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP)); - data->temp_hyst = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP_HYST)); - data->temp_crit = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP_CRIT)); - data->temp_min = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP_MIN)); - data->temp_max = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP_MAX)); - data->alarms = - lm77_read_value(client, LM77_REG_TEMP) & 0x0007; - data->last_updated = jiffies; - data->valid = 1; - } - - mutex_unlock(&data->update_lock); +static const struct i2c_device_id lm77_id[] = { + { "lm77", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm77_id); - return data; -} +/* This is the driver that will be inserted */ +static struct i2c_driver lm77_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "lm77", + }, + .probe = lm77_probe, + .remove = lm77_remove, + .id_table = lm77_id, + .detect = lm77_detect, + .address_list = normal_i2c, +}; module_i2c_driver(lm77_driver); |