diff options
Diffstat (limited to 'drivers/gpu')
| -rw-r--r-- | drivers/gpu/drm/Makefile | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_crtc_helper.c | 370 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_probe_helper.c | 426 |
3 files changed, 427 insertions, 371 deletions
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 9d25dbbe6771..48e38ba22783 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -23,7 +23,7 @@ drm-$(CONFIG_DRM_PANEL) += drm_panel.o drm-usb-y := drm_usb.o -drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o +drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_KMS_FB_HELPER) += drm_fb_helper.o drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index c43825e8f5c1..df281b54db01 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -72,147 +72,6 @@ void drm_helper_move_panel_connectors_to_head(struct drm_device *dev) } EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head); -static bool drm_kms_helper_poll = true; -module_param_named(poll, drm_kms_helper_poll, bool, 0600); - -static void drm_mode_validate_flag(struct drm_connector *connector, - int flags) -{ - struct drm_display_mode *mode; - - if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE | - DRM_MODE_FLAG_3D_MASK)) - return; - - list_for_each_entry(mode, &connector->modes, head) { - if ((mode->flags & DRM_MODE_FLAG_INTERLACE) && - !(flags & DRM_MODE_FLAG_INTERLACE)) - mode->status = MODE_NO_INTERLACE; - if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) && - !(flags & DRM_MODE_FLAG_DBLSCAN)) - mode->status = MODE_NO_DBLESCAN; - if ((mode->flags & DRM_MODE_FLAG_3D_MASK) && - !(flags & DRM_MODE_FLAG_3D_MASK)) - mode->status = MODE_NO_STEREO; - } - - return; -} - -/** - * drm_helper_probe_single_connector_modes - get complete set of display modes - * @connector: connector to probe - * @maxX: max width for modes - * @maxY: max height for modes - * - * Based on the helper callbacks implemented by @connector try to detect all - * valid modes. Modes will first be added to the connector's probed_modes list, - * then culled (based on validity and the @maxX, @maxY parameters) and put into - * the normal modes list. - * - * Intended to be use as a generic implementation of the ->fill_modes() - * @connector vfunc for drivers that use the crtc helpers for output mode - * filtering and detection. - * - * Returns: - * The number of modes found on @connector. - */ -int drm_helper_probe_single_connector_modes(struct drm_connector *connector, - uint32_t maxX, uint32_t maxY) -{ - struct drm_device *dev = connector->dev; - struct drm_display_mode *mode; - struct drm_connector_helper_funcs *connector_funcs = - connector->helper_private; - int count = 0; - int mode_flags = 0; - bool verbose_prune = true; - - WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, - drm_get_connector_name(connector)); - /* set all modes to the unverified state */ - list_for_each_entry(mode, &connector->modes, head) - mode->status = MODE_UNVERIFIED; - - if (connector->force) { - if (connector->force == DRM_FORCE_ON) - connector->status = connector_status_connected; - else - connector->status = connector_status_disconnected; - if (connector->funcs->force) - connector->funcs->force(connector); - } else { - connector->status = connector->funcs->detect(connector, true); - } - - /* Re-enable polling in case the global poll config changed. */ - if (drm_kms_helper_poll != dev->mode_config.poll_running) - drm_kms_helper_poll_enable(dev); - - dev->mode_config.poll_running = drm_kms_helper_poll; - - if (connector->status == connector_status_disconnected) { - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n", - connector->base.id, drm_get_connector_name(connector)); - drm_mode_connector_update_edid_property(connector, NULL); - verbose_prune = false; - goto prune; - } - -#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE - count = drm_load_edid_firmware(connector); - if (count == 0) -#endif - count = (*connector_funcs->get_modes)(connector); - - if (count == 0 && connector->status == connector_status_connected) - count = drm_add_modes_noedid(connector, 1024, 768); - if (count == 0) - goto prune; - - drm_mode_connector_list_update(connector); - - if (maxX && maxY) - drm_mode_validate_size(dev, &connector->modes, maxX, maxY); - - if (connector->interlace_allowed) - mode_flags |= DRM_MODE_FLAG_INTERLACE; - if (connector->doublescan_allowed) - mode_flags |= DRM_MODE_FLAG_DBLSCAN; - if (connector->stereo_allowed) - mode_flags |= DRM_MODE_FLAG_3D_MASK; - drm_mode_validate_flag(connector, mode_flags); - - list_for_each_entry(mode, &connector->modes, head) { - if (mode->status == MODE_OK) - mode->status = connector_funcs->mode_valid(connector, - mode); - } - -prune: - drm_mode_prune_invalid(dev, &connector->modes, verbose_prune); - - if (list_empty(&connector->modes)) - return 0; - - list_for_each_entry(mode, &connector->modes, head) - mode->vrefresh = drm_mode_vrefresh(mode); - - drm_mode_sort(&connector->modes); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id, - drm_get_connector_name(connector)); - list_for_each_entry(mode, &connector->modes, head) { - drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); - drm_mode_debug_printmodeline(mode); - } - - return count; -} -EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); - /** * drm_helper_encoder_in_use - check if a given encoder is in use * @encoder: encoder to check @@ -1020,232 +879,3 @@ void drm_helper_resume_force_mode(struct drm_device *dev) drm_modeset_unlock_all(dev); } EXPORT_SYMBOL(drm_helper_resume_force_mode); - -/** - * drm_kms_helper_hotplug_event - fire off KMS hotplug events - * @dev: drm_device whose connector state changed - * - * This function fires off the uevent for userspace and also calls the - * output_poll_changed function, which is most commonly used to inform the fbdev - * emulation code and allow it to update the fbcon output configuration. - * - * Drivers should call this from their hotplug handling code when a change is - * detected. Note that this function does not do any output detection of its - * own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the - * driver already. - * - * This function must be called from process context with no mode - * setting locks held. - */ -void drm_kms_helper_hotplug_event(struct drm_device *dev) -{ - /* send a uevent + call fbdev */ - drm_sysfs_hotplug_event(dev); - if (dev->mode_config.funcs->output_poll_changed) - dev->mode_config.funcs->output_poll_changed(dev); -} -EXPORT_SYMBOL(drm_kms_helper_hotplug_event); - -#define DRM_OUTPUT_POLL_PERIOD (10*HZ) -static void output_poll_execute(struct work_struct *work) -{ - struct delayed_work *delayed_work = to_delayed_work(work); - struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work); - struct drm_connector *connector; - enum drm_connector_status old_status; - bool repoll = false, changed = false; - - if (!drm_kms_helper_poll) - return; - - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - - /* Ignore forced connectors. */ - if (connector->force) - continue; - - /* Ignore HPD capable connectors and connectors where we don't - * want any hotplug detection at all for polling. */ - if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD) - continue; - - repoll = true; - - old_status = connector->status; - /* if we are connected and don't want to poll for disconnect - skip it */ - if (old_status == connector_status_connected && - !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT)) - continue; - - connector->status = connector->funcs->detect(connector, false); - if (old_status != connector->status) { - const char *old, *new; - - old = drm_get_connector_status_name(old_status); - new = drm_get_connector_status_name(connector->status); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] " - "status updated from %s to %s\n", - connector->base.id, - drm_get_connector_name(connector), - old, new); - - changed = true; - } - } - - mutex_unlock(&dev->mode_config.mutex); - - if (changed) - drm_kms_helper_hotplug_event(dev); - - if (repoll) - schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD); -} - -/** - * drm_kms_helper_poll_disable - disable output polling - * @dev: drm_device - * - * This function disables the output polling work. - * - * Drivers can call this helper from their device suspend implementation. It is - * not an error to call this even when output polling isn't enabled or arlready - * disabled. - */ -void drm_kms_helper_poll_disable(struct drm_device *dev) -{ - if (!dev->mode_config.poll_enabled) - return; - cancel_delayed_work_sync(&dev->mode_config.output_poll_work); -} -EXPORT_SYMBOL(drm_kms_helper_poll_disable); - -/** - * drm_kms_helper_poll_enable - re-enable output polling. - * @dev: drm_device - * - * This function re-enables the output polling work. - * - * Drivers can call this helper from their device resume implementation. It is - * an error to call this when the output polling support has not yet been set - * up. - */ -void drm_kms_helper_poll_enable(struct drm_device *dev) -{ - bool poll = false; - struct drm_connector *connector; - - if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll) - return; - - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT | - DRM_CONNECTOR_POLL_DISCONNECT)) - poll = true; - } - - if (poll) - schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD); -} -EXPORT_SYMBOL(drm_kms_helper_poll_enable); - -/** - * drm_kms_helper_poll_init - initialize and enable output polling - * @dev: drm_device - * - * This function intializes and then also enables output polling support for - * @dev. Drivers which do not have reliable hotplug support in hardware can use - * this helper infrastructure to regularly poll such connectors for changes in - * their connection state. - * - * Drivers can control which connectors are polled by setting the - * DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On - * connectors where probing live outputs can result in visual distortion drivers - * should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this. - * Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are - * completely ignored by the polling logic. - * - * Note that a connector can be both polled and probed from the hotplug handler, - * in case the hotplug interrupt is known to be unreliable. - */ -void drm_kms_helper_poll_init(struct drm_device *dev) -{ - INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute); - dev->mode_config.poll_enabled = true; - - drm_kms_helper_poll_enable(dev); -} -EXPORT_SYMBOL(drm_kms_helper_poll_init); - -/** - * drm_kms_helper_poll_fini - disable output polling and clean it up - * @dev: drm_device - */ -void drm_kms_helper_poll_fini(struct drm_device *dev) -{ - drm_kms_helper_poll_disable(dev); -} -EXPORT_SYMBOL(drm_kms_helper_poll_fini); - -/** - * drm_helper_hpd_irq_event - hotplug processing - * @dev: drm_device - * - * Drivers can use this helper function to run a detect cycle on all connectors - * which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All - * other connectors are ignored, which is useful to avoid reprobing fixed - * panels. - * - * This helper function is useful for drivers which can't or don't track hotplug - * interrupts for each connector. - * - * Drivers which support hotplug interrupts for each connector individually and - * which have a more fine-grained detect logic should bypass this code and - * directly call drm_kms_helper_hotplug_event() in case the connector state - * changed. - * - * This function must be called from process context with no mode - * setting locks held. - * - * Note that a connector can be both polled and probed from the hotplug handler, - * in case the hotplug interrupt is known to be unreliable. - */ -bool drm_helper_hpd_irq_event(struct drm_device *dev) -{ - struct drm_connector *connector; - enum drm_connector_status old_status; - bool changed = false; - - if (!dev->mode_config.poll_enabled) - return false; - - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - - /* Only handle HPD capable connectors. */ - if (!(connector->polled & DRM_CONNECTOR_POLL_HPD)) - continue; - - old_status = connector->status; - - connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", - connector->base.id, - drm_get_connector_name(connector), - drm_get_connector_status_name(old_status), - drm_get_connector_status_name(connector->status)); - if (old_status != connector->status) - changed = true; - } - - mutex_unlock(&dev->mode_config.mutex); - - if (changed) - drm_kms_helper_hotplug_event(dev); - - return changed; -} -EXPORT_SYMBOL(drm_helper_hpd_irq_event); diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c new file mode 100644 index 000000000000..e70f54d4a581 --- /dev/null +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -0,0 +1,426 @@ +/* + * Copyright (c) 2006-2008 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * + * DRM core CRTC related functions + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + * + * Authors: + * Keith Packard + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/export.h> +#include <linux/moduleparam.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_edid.h> + +/** + * DOC: output probing helper overview + * + * This library provides some helper code for output probing. It provides an + * implementation of the core connector->fill_modes interface with + * drm_helper_probe_single_connector_modes. + * + * It also provides support for polling connectors with a work item and for + * generic hotplug interrupt handling where the driver doesn't or cannot keep + * track of a per-connector hpd interrupt. + * + * This helper library can be used independently of the modeset helper library. + * Drivers can also overwrite different parts e.g. use their own hotplug + * handling code to avoid probing unrelated outputs. + */ + +static bool drm_kms_helper_poll = true; +module_param_named(poll, drm_kms_helper_poll, bool, 0600); + +static void drm_mode_validate_flag(struct drm_connector *connector, + int flags) +{ + struct drm_display_mode *mode; + + if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE | + DRM_MODE_FLAG_3D_MASK)) + return; + + list_for_each_entry(mode, &connector->modes, head) { + if ((mode->flags & DRM_MODE_FLAG_INTERLACE) && + !(flags & DRM_MODE_FLAG_INTERLACE)) + mode->status = MODE_NO_INTERLACE; + if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) && + !(flags & DRM_MODE_FLAG_DBLSCAN)) + mode->status = MODE_NO_DBLESCAN; + if ((mode->flags & DRM_MODE_FLAG_3D_MASK) && + !(flags & DRM_MODE_FLAG_3D_MASK)) + mode->status = MODE_NO_STEREO; + } + + return; +} + +/** + * drm_helper_probe_single_connector_modes - get complete set of display modes + * @connector: connector to probe + * @maxX: max width for modes + * @maxY: max height for modes + * + * Based on the helper callbacks implemented by @connector try to detect all + * valid modes. Modes will first be added to the connector's probed_modes list, + * then culled (based on validity and the @maxX, @maxY parameters) and put into + * the normal modes list. + * + * Intended to be use as a generic implementation of the ->fill_modes() + * @connector vfunc for drivers that use the crtc helpers for output mode + * filtering and detection. + * + * Returns: + * The number of modes found on @connector. + */ +int drm_helper_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + struct drm_device *dev = connector->dev; + struct drm_display_mode *mode; + struct drm_connector_helper_funcs *connector_funcs = + connector->helper_private; + int count = 0; + int mode_flags = 0; + bool verbose_prune = true; + + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, + drm_get_connector_name(connector)); + /* set all modes to the unverified state */ + list_for_each_entry(mode, &connector->modes, head) + mode->status = MODE_UNVERIFIED; + + if (connector->force) { + if (connector->force == DRM_FORCE_ON) + connector->status = connector_status_connected; + else + connector->status = connector_status_disconnected; + if (connector->funcs->force) + connector->funcs->force(connector); + } else { + connector->status = connector->funcs->detect(connector, true); + } + + /* Re-enable polling in case the global poll config changed. */ + if (drm_kms_helper_poll != dev->mode_config.poll_running) + drm_kms_helper_poll_enable(dev); + + dev->mode_config.poll_running = drm_kms_helper_poll; + + if (connector->status == connector_status_disconnected) { + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n", + connector->base.id, drm_get_connector_name(connector)); + drm_mode_connector_update_edid_property(connector, NULL); + verbose_prune = false; + goto prune; + } + +#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE + count = drm_load_edid_firmware(connector); + if (count == 0) +#endif + count = (*connector_funcs->get_modes)(connector); + + if (count == 0 && connector->status == connector_status_connected) + count = drm_add_modes_noedid(connector, 1024, 768); + if (count == 0) + goto prune; + + drm_mode_connector_list_update(connector); + + if (maxX && maxY) + drm_mode_validate_size(dev, &connector->modes, maxX, maxY); + + if (connector->interlace_allowed) + mode_flags |= DRM_MODE_FLAG_INTERLACE; + if (connector->doublescan_allowed) + mode_flags |= DRM_MODE_FLAG_DBLSCAN; + if (connector->stereo_allowed) + mode_flags |= DRM_MODE_FLAG_3D_MASK; + drm_mode_validate_flag(connector, mode_flags); + + list_for_each_entry(mode, &connector->modes, head) { + if (mode->status == MODE_OK) + mode->status = connector_funcs->mode_valid(connector, + mode); + } + +prune: + drm_mode_prune_invalid(dev, &connector->modes, verbose_prune); + + if (list_empty(&connector->modes)) + return 0; + + list_for_each_entry(mode, &connector->modes, head) + mode->vrefresh = drm_mode_vrefresh(mode); + + drm_mode_sort(&connector->modes); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id, + drm_get_connector_name(connector)); + list_for_each_entry(mode, &connector->modes, head) { + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); + drm_mode_debug_printmodeline(mode); + } + + return count; +} +EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); + +/** + * drm_kms_helper_hotplug_event - fire off KMS hotplug events + * @dev: drm_device whose connector state changed + * + * This function fires off the uevent for userspace and also calls the + * output_poll_changed function, which is most commonly used to inform the fbdev + * emulation code and allow it to update the fbcon output configuration. + * + * Drivers should call this from their hotplug handling code when a change is + * detected. Note that this function does not do any output detection of its + * own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the + * driver already. + * + * This function must be called from process context with no mode + * setting locks held. + */ +void drm_kms_helper_hotplug_event(struct drm_device *dev) +{ + /* send a uevent + call fbdev */ + drm_sysfs_hotplug_event(dev); + if (dev->mode_config.funcs->output_poll_changed) + dev->mode_config.funcs->output_poll_changed(dev); +} +EXPORT_SYMBOL(drm_kms_helper_hotplug_event); + +#define DRM_OUTPUT_POLL_PERIOD (10*HZ) +static void output_poll_execute(struct work_struct *work) +{ + struct delayed_work *delayed_work = to_delayed_work(work); + struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work); + struct drm_connector *connector; + enum drm_connector_status old_status; + bool repoll = false, changed = false; + + if (!drm_kms_helper_poll) + return; + + mutex_lock(&dev->mode_config.mutex); + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + + /* Ignore forced connectors. */ + if (connector->force) + continue; + + /* Ignore HPD capable connectors and connectors where we don't + * want any hotplug detection at all for polling. */ + if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD) + continue; + + repoll = true; + + old_status = connector->status; + /* if we are connected and don't want to poll for disconnect + skip it */ + if (old_status == connector_status_connected && + !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT)) + continue; + + connector->status = connector->funcs->detect(connector, false); + if (old_status != connector->status) { + const char *old, *new; + + old = drm_get_connector_status_name(old_status); + new = drm_get_connector_status_name(connector->status); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] " + "status updated from %s to %s\n", + connector->base.id, + drm_get_connector_name(connector), + old, new); + + changed = true; + } + } + + mutex_unlock(&dev->mode_config.mutex); + + if (changed) + drm_kms_helper_hotplug_event(dev); + + if (repoll) + schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD); +} + +/** + * drm_kms_helper_poll_disable - disable output polling + * @dev: drm_device + * + * This function disables the output polling work. + * + * Drivers can call this helper from their device suspend implementation. It is + * not an error to call this even when output polling isn't enabled or arlready + * disabled. + */ +void drm_kms_helper_poll_disable(struct drm_device *dev) +{ + if (!dev->mode_config.poll_enabled) + return; + cancel_delayed_work_sync(&dev->mode_config.output_poll_work); +} +EXPORT_SYMBOL(drm_kms_helper_poll_disable); + +/** + * drm_kms_helper_poll_enable - re-enable output polling. + * @dev: drm_device + * + * This function re-enables the output polling work. + * + * Drivers can call this helper from their device resume implementation. It is + * an error to call this when the output polling support has not yet been set + * up. + */ +void drm_kms_helper_poll_enable(struct drm_device *dev) +{ + bool poll = false; + struct drm_connector *connector; + + if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll) + return; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT)) + poll = true; + } + + if (poll) + schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD); +} +EXPORT_SYMBOL(drm_kms_helper_poll_enable); + +/** + * drm_kms_helper_poll_init - initialize and enable output polling + * @dev: drm_device + * + * This function intializes and then also enables output polling support for + * @dev. Drivers which do not have reliable hotplug support in hardware can use + * this helper infrastructure to regularly poll such connectors for changes in + * their connection state. + * + * Drivers can control which connectors are polled by setting the + * DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On + * connectors where probing live outputs can result in visual distortion drivers + * should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this. + * Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are + * completely ignored by the polling logic. + * + * Note that a connector can be both polled and probed from the hotplug handler, + * in case the hotplug interrupt is known to be unreliable. + */ +void drm_kms_helper_poll_init(struct drm_device *dev) +{ + INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute); + dev->mode_config.poll_enabled = true; + + drm_kms_helper_poll_enable(dev); +} +EXPORT_SYMBOL(drm_kms_helper_poll_init); + +/** + * drm_kms_helper_poll_fini - disable output polling and clean it up + * @dev: drm_device + */ +void drm_kms_helper_poll_fini(struct drm_device *dev) +{ + drm_kms_helper_poll_disable(dev); +} +EXPORT_SYMBOL(drm_kms_helper_poll_fini); + +/** + * drm_helper_hpd_irq_event - hotplug processing + * @dev: drm_device + * + * Drivers can use this helper function to run a detect cycle on all connectors + * which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All + * other connectors are ignored, which is useful to avoid reprobing fixed + * panels. + * + * This helper function is useful for drivers which can't or don't track hotplug + * interrupts for each connector. + * + * Drivers which support hotplug interrupts for each connector individually and + * which have a more fine-grained detect logic should bypass this code and + * directly call drm_kms_helper_hotplug_event() in case the connector state + * changed. + * + * This function must be called from process context with no mode + * setting locks held. + * + * Note that a connector can be both polled and probed from the hotplug handler, + * in case the hotplug interrupt is known to be unreliable. + */ +bool drm_helper_hpd_irq_event(struct drm_device *dev) +{ + struct drm_connector *connector; + enum drm_connector_status old_status; + bool changed = false; + + if (!dev->mode_config.poll_enabled) + return false; + + mutex_lock(&dev->mode_config.mutex); + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + + /* Only handle HPD capable connectors. */ + if (!(connector->polled & DRM_CONNECTOR_POLL_HPD)) + continue; + + old_status = connector->status; + + connector->status = connector->funcs->detect(connector, false); + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", + connector->base.id, + drm_get_connector_name(connector), + drm_get_connector_status_name(old_status), + drm_get_connector_status_name(connector->status)); + if (old_status != connector->status) + changed = true; + } + + mutex_unlock(&dev->mode_config.mutex); + + if (changed) + drm_kms_helper_hotplug_event(dev); + + return changed; +} +EXPORT_SYMBOL(drm_helper_hpd_irq_event); |