diff options
Diffstat (limited to 'drivers/gpu/drm/msm/dsi/pll')
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/pll/dsi_pll.c | 5 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 9 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 822 |
3 files changed, 835 insertions, 1 deletions
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c index bc289f5c9078..613e206fa4fc 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c @@ -166,6 +166,9 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev, case MSM_DSI_PHY_14NM: pll = msm_dsi_pll_14nm_init(pdev, id); break; + case MSM_DSI_PHY_10NM: + pll = msm_dsi_pll_10nm_init(pdev, id); + break; default: pll = ERR_PTR(-ENXIO); break; @@ -173,7 +176,7 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev, if (IS_ERR(pll)) { dev_err(dev, "%s: failed to init DSI PLL\n", __func__); - return NULL; + return pll; } pll->type = type; diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h index f63e7ada74a8..8b32271cbc24 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h @@ -115,5 +115,14 @@ msm_dsi_pll_14nm_init(struct platform_device *pdev, int id) return ERR_PTR(-ENODEV); } #endif +#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY +struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id); +#else +static inline struct msm_dsi_pll * +msm_dsi_pll_10nm_init(struct platform_device *pdev, int id) +{ + return ERR_PTR(-ENODEV); +} +#endif #endif /* __DSI_PLL_H__ */ diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c new file mode 100644 index 000000000000..c4c37a7df637 --- /dev/null +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c @@ -0,0 +1,822 @@ +/* + * SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2018, The Linux Foundation + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/iopoll.h> + +#include "dsi_pll.h" +#include "dsi.xml.h" + +/* + * DSI PLL 10nm - clock diagram (eg: DSI0): + * + * dsi0_pll_out_div_clk dsi0_pll_bit_clk + * | | + * | | + * +---------+ | +----------+ | +----+ + * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0pllbyte + * +---------+ | +----------+ | +----+ + * | | + * | | dsi0_pll_by_2_bit_clk + * | | | + * | | +----+ | |\ dsi0_pclk_mux + * | |--| /2 |--o--| \ | + * | | +----+ | \ | +---------+ + * | --------------| |--o--| div_7_4 |-- dsi0pll + * |------------------------------| / +---------+ + * | +-----+ | / + * -----------| /4? |--o----------|/ + * +-----+ | | + * | |dsiclk_sel + * | + * dsi0_pll_post_out_div_clk + */ + +#define DSI_BYTE_PLL_CLK 0 +#define DSI_PIXEL_PLL_CLK 1 +#define NUM_PROVIDED_CLKS 2 + +struct dsi_pll_regs { + u32 pll_prop_gain_rate; + u32 pll_lockdet_rate; + u32 decimal_div_start; + u32 frac_div_start_low; + u32 frac_div_start_mid; + u32 frac_div_start_high; + u32 pll_clock_inverters; + u32 ssc_stepsize_low; + u32 ssc_stepsize_high; + u32 ssc_div_per_low; + u32 ssc_div_per_high; + u32 ssc_adjper_low; + u32 ssc_adjper_high; + u32 ssc_control; +}; + +struct dsi_pll_config { + u32 ref_freq; + bool div_override; + u32 output_div; + bool ignore_frac; + bool disable_prescaler; + bool enable_ssc; + bool ssc_center; + u32 dec_bits; + u32 frac_bits; + u32 lock_timer; + u32 ssc_freq; + u32 ssc_offset; + u32 ssc_adj_per; + u32 thresh_cycles; + u32 refclk_cycles; +}; + +struct pll_10nm_cached_state { + unsigned long vco_rate; + u8 bit_clk_div; + u8 pix_clk_div; + u8 pll_out_div; + u8 pll_mux; +}; + +struct dsi_pll_10nm { + struct msm_dsi_pll base; + + int id; + struct platform_device *pdev; + + void __iomem *phy_cmn_mmio; + void __iomem *mmio; + + u64 vco_ref_clk_rate; + u64 vco_current_rate; + + /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */ + spinlock_t postdiv_lock; + + int vco_delay; + struct dsi_pll_config pll_configuration; + struct dsi_pll_regs reg_setup; + + /* private clocks: */ + struct clk_hw *hws[NUM_DSI_CLOCKS_MAX]; + u32 num_hws; + + /* clock-provider: */ + struct clk_hw_onecell_data *hw_data; + + struct pll_10nm_cached_state cached_state; + + enum msm_dsi_phy_usecase uc; + struct dsi_pll_10nm *slave; +}; + +#define to_pll_10nm(x) container_of(x, struct dsi_pll_10nm, base) + +/* + * Global list of private DSI PLL struct pointers. We need this for Dual DSI + * mode, where the master PLL's clk_ops needs access the slave's private data + */ +static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX]; + +static void dsi_pll_setup_config(struct dsi_pll_10nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + + config->ref_freq = pll->vco_ref_clk_rate; + config->output_div = 1; + config->dec_bits = 8; + config->frac_bits = 18; + config->lock_timer = 64; + config->ssc_freq = 31500; + config->ssc_offset = 5000; + config->ssc_adj_per = 2; + config->thresh_cycles = 32; + config->refclk_cycles = 256; + + config->div_override = false; + config->ignore_frac = false; + config->disable_prescaler = false; + + config->enable_ssc = false; + config->ssc_center = 0; +} + +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + struct dsi_pll_regs *regs = &pll->reg_setup; + u64 fref = pll->vco_ref_clk_rate; + u64 pll_freq; + u64 divider; + u64 dec, dec_multiple; + u32 frac; + u64 multiplier; + + pll_freq = pll->vco_current_rate; + + if (config->disable_prescaler) + divider = fref; + else + divider = fref * 2; + + multiplier = 1 << config->frac_bits; + dec_multiple = div_u64(pll_freq * multiplier, divider); + div_u64_rem(dec_multiple, multiplier, &frac); + + dec = div_u64(dec_multiple, multiplier); + + if (pll_freq <= 1900000000UL) + regs->pll_prop_gain_rate = 8; + else if (pll_freq <= 3000000000UL) + regs->pll_prop_gain_rate = 10; + else + regs->pll_prop_gain_rate = 12; + if (pll_freq < 1100000000UL) + regs->pll_clock_inverters = 8; + else + regs->pll_clock_inverters = 0; + + regs->pll_lockdet_rate = config->lock_timer; + regs->decimal_div_start = dec; + regs->frac_div_start_low = (frac & 0xff); + regs->frac_div_start_mid = (frac & 0xff00) >> 8; + regs->frac_div_start_high = (frac & 0x30000) >> 16; +} + +#define SSC_CENTER BIT(0) +#define SSC_EN BIT(1) + +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + struct dsi_pll_regs *regs = &pll->reg_setup; + u32 ssc_per; + u32 ssc_mod; + u64 ssc_step_size; + u64 frac; + + if (!config->enable_ssc) { + DBG("SSC not enabled\n"); + return; + } + + ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); + ssc_per -= ssc_mod; + + frac = regs->frac_div_start_low | + (regs->frac_div_start_mid << 8) | + (regs->frac_div_start_high << 16); + ssc_step_size = regs->decimal_div_start; + ssc_step_size *= (1 << config->frac_bits); + ssc_step_size += frac; + ssc_step_size *= config->ssc_offset; + ssc_step_size *= (config->ssc_adj_per + 1); + ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); + ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); + + regs->ssc_div_per_low = ssc_per & 0xFF; + regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; + regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); + regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); + regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; + regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; + + regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + + pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", + regs->decimal_div_start, frac, config->frac_bits); + pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", + ssc_per, (u32)ssc_step_size, config->ssc_adj_per); +} + +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll) +{ + void __iomem *base = pll->mmio; + struct dsi_pll_regs *regs = &pll->reg_setup; + + if (pll->pll_configuration.enable_ssc) { + pr_debug("SSC is enabled\n"); + + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1, + regs->ssc_stepsize_low); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, + regs->ssc_stepsize_high); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1, + regs->ssc_div_per_low); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1, + regs->ssc_div_per_high); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1, + regs->ssc_adjper_low); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1, + regs->ssc_adjper_high); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL, + SSC_EN | regs->ssc_control); + } +} + +static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll) +{ + void __iomem *base = pll->mmio; + + pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE, 0x80); + pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03); + pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00); + pll_write(base + REG_DSI_10nm_PHY_PLL_DSM_DIVIDER, 0x00); + pll_write(base + REG_DSI_10nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e); + pll_write(base + REG_DSI_10nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40); + pll_write(base + REG_DSI_10nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE, + 0xba); + pll_write(base + REG_DSI_10nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c); + pll_write(base + REG_DSI_10nm_PHY_PLL_OUTDIV, 0x00); + pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_OVERRIDE, 0x00); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x08); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_BAND_SET_RATE_1, 0xc0); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0xfa); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1, + 0x4c); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80); + pll_write(base + REG_DSI_10nm_PHY_PLL_PFILT, 0x29); + pll_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f); +} + +static void dsi_pll_commit(struct dsi_pll_10nm *pll) +{ + void __iomem *base = pll->mmio; + struct dsi_pll_regs *reg = &pll->reg_setup; + + pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); + pll_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1, + reg->decimal_div_start); + pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1, + reg->frac_div_start_low); + pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1, + reg->frac_div_start_mid); + pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1, + reg->frac_div_start_high); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); + pll_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10); + pll_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS, + reg->pll_clock_inverters); +} + +static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + + DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->id, rate, + parent_rate); + + pll_10nm->vco_current_rate = rate; + pll_10nm->vco_ref_clk_rate = parent_rate; + + dsi_pll_setup_config(pll_10nm); + + dsi_pll_calc_dec_frac(pll_10nm); + + dsi_pll_calc_ssc(pll_10nm); + + dsi_pll_commit(pll_10nm); + + dsi_pll_config_hzindep_reg(pll_10nm); + + dsi_pll_ssc_commit(pll_10nm); + + /* flush, ensure all register writes are done*/ + wmb(); + + return 0; +} + +static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll) +{ + int rc; + u32 status = 0; + u32 const delay_us = 100; + u32 const timeout_us = 5000; + + rc = readl_poll_timeout_atomic(pll->mmio + + REG_DSI_10nm_PHY_PLL_COMMON_STATUS_ONE, + status, + ((status & BIT(0)) > 0), + delay_us, + timeout_us); + if (rc) + pr_err("DSI PLL(%d) lock failed, status=0x%08x\n", + pll->id, status); + + return rc; +} + +static void dsi_pll_disable_pll_bias(struct dsi_pll_10nm *pll) +{ + u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0); + + pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0); + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0, + data & ~BIT(5)); + ndelay(250); +} + +static void dsi_pll_enable_pll_bias(struct dsi_pll_10nm *pll) +{ + u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0); + + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0, + data | BIT(5)); + pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0xc0); + ndelay(250); +} + +static void dsi_pll_disable_global_clk(struct dsi_pll_10nm *pll) +{ + u32 data; + + data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1); + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1, + data & ~BIT(5)); +} + +static void dsi_pll_enable_global_clk(struct dsi_pll_10nm *pll) +{ + u32 data; + + data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1); + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1, + data | BIT(5)); +} + +static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + int rc; + + dsi_pll_enable_pll_bias(pll_10nm); + if (pll_10nm->slave) + dsi_pll_enable_pll_bias(pll_10nm->slave); + + /* Start PLL */ + pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, + 0x01); + + /* + * ensure all PLL configurations are written prior to checking + * for PLL lock. + */ + wmb(); + + /* Check for PLL lock */ + rc = dsi_pll_10nm_lock_status(pll_10nm); + if (rc) { + pr_err("PLL(%d) lock failed\n", pll_10nm->id); + goto error; + } + + pll->pll_on = true; + + dsi_pll_enable_global_clk(pll_10nm); + if (pll_10nm->slave) + dsi_pll_enable_global_clk(pll_10nm->slave); + + pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, + 0x01); + if (pll_10nm->slave) + pll_write(pll_10nm->slave->phy_cmn_mmio + + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x01); + +error: + return rc; +} + +static void dsi_pll_disable_sub(struct dsi_pll_10nm *pll) +{ + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0); + dsi_pll_disable_pll_bias(pll); +} + +static void dsi_pll_10nm_vco_unprepare(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + + /* + * To avoid any stray glitches while abruptly powering down the PLL + * make sure to gate the clock using the clock enable bit before + * powering down the PLL + */ + dsi_pll_disable_global_clk(pll_10nm); + pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0); + dsi_pll_disable_sub(pll_10nm); + if (pll_10nm->slave) { + dsi_pll_disable_global_clk(pll_10nm->slave); + dsi_pll_disable_sub(pll_10nm->slave); + } + /* flush, ensure all register writes are done */ + wmb(); + pll->pll_on = false; +} + +static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + void __iomem *base = pll_10nm->mmio; + u64 ref_clk = pll_10nm->vco_ref_clk_rate; + u64 vco_rate = 0x0; + u64 multiplier; + u32 frac; + u32 dec; + u64 pll_freq, tmp64; + + dec = pll_read(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1); + dec &= 0xff; + + frac = pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1); + frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1) & + 0xff) << 8); + frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1) & + 0x3) << 16); + + /* + * TODO: + * 1. Assumes prescaler is disabled + * 2. Multiplier is 2^18. it should be 2^(num_of_frac_bits) + */ + multiplier = 1 << 18; + pll_freq = dec * (ref_clk * 2); + tmp64 = (ref_clk * 2 * frac); + pll_freq += div_u64(tmp64, multiplier); + + vco_rate = pll_freq; + + DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x", + pll_10nm->id, (unsigned long)vco_rate, dec, frac); + + return (unsigned long)vco_rate; +} + +static const struct clk_ops clk_ops_dsi_pll_10nm_vco = { + .round_rate = msm_dsi_pll_helper_clk_round_rate, + .set_rate = dsi_pll_10nm_vco_set_rate, + .recalc_rate = dsi_pll_10nm_vco_recalc_rate, + .prepare = dsi_pll_10nm_vco_prepare, + .unprepare = dsi_pll_10nm_vco_unprepare, +}; + +/* + * PLL Callbacks + */ + +static void dsi_pll_10nm_save_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct pll_10nm_cached_state *cached = &pll_10nm->cached_state; + void __iomem *phy_base = pll_10nm->phy_cmn_mmio; + u32 cmn_clk_cfg0, cmn_clk_cfg1; + + cached->pll_out_div = pll_read(pll_10nm->mmio + + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE); + cached->pll_out_div &= 0x3; + + cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0); + cached->bit_clk_div = cmn_clk_cfg0 & 0xf; + cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4; + + cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1); + cached->pll_mux = cmn_clk_cfg1 & 0x3; + + DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x", + pll_10nm->id, cached->pll_out_div, cached->bit_clk_div, + cached->pix_clk_div, cached->pll_mux); +} + +static int dsi_pll_10nm_restore_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct pll_10nm_cached_state *cached = &pll_10nm->cached_state; + void __iomem *phy_base = pll_10nm->phy_cmn_mmio; + u32 val; + + val = pll_read(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE); + val &= ~0x3; + val |= cached->pll_out_div; + pll_write(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, val); + + pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0, + cached->bit_clk_div | (cached->pix_clk_div << 4)); + + val = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1); + val &= ~0x3; + val |= cached->pll_mux; + pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val); + + DBG("DSI PLL%d", pll_10nm->id); + + return 0; +} + +static int dsi_pll_10nm_set_usecase(struct msm_dsi_pll *pll, + enum msm_dsi_phy_usecase uc) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + void __iomem *base = pll_10nm->phy_cmn_mmio; + u32 data = 0x0; /* internal PLL */ + + DBG("DSI PLL%d", pll_10nm->id); + + switch (uc) { + case MSM_DSI_PHY_STANDALONE: + break; + case MSM_DSI_PHY_MASTER: + pll_10nm->slave = pll_10nm_list[(pll_10nm->id + 1) % DSI_MAX]; + break; + case MSM_DSI_PHY_SLAVE: + data = 0x1; /* external PLL */ + break; + default: + return -EINVAL; + } + + /* set PLL src */ + pll_write(base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, (data << 2)); + + pll_10nm->uc = uc; + + return 0; +} + +static int dsi_pll_10nm_get_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct clk_hw_onecell_data *hw_data = pll_10nm->hw_data; + + DBG("DSI PLL%d", pll_10nm->id); + + if (byte_clk_provider) + *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk; + if (pixel_clk_provider) + *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk; + + return 0; +} + +static void dsi_pll_10nm_destroy(struct msm_dsi_pll *pll) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + + DBG("DSI PLL%d", pll_10nm->id); +} + +/* + * The post dividers and mux clocks are created using the standard divider and + * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux + * state to follow the master PLL's divider/mux state. Therefore, we don't + * require special clock ops that also configure the slave PLL registers + */ +static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm) +{ + char clk_name[32], parent[32], vco_name[32]; + char parent2[32], parent3[32], parent4[32]; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .name = vco_name, + .flags = CLK_IGNORE_UNUSED, + .ops = &clk_ops_dsi_pll_10nm_vco, + }; + struct device *dev = &pll_10nm->pdev->dev; + struct clk_hw **hws = pll_10nm->hws; + struct clk_hw_onecell_data *hw_data; + struct clk_hw *hw; + int num = 0; + int ret; + + DBG("DSI%d", pll_10nm->id); + + hw_data = devm_kzalloc(dev, sizeof(*hw_data) + + NUM_PROVIDED_CLKS * sizeof(struct clk_hw *), + GFP_KERNEL); + if (!hw_data) + return -ENOMEM; + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_10nm->id); + pll_10nm->base.clk_hw.init = &vco_init; + + ret = clk_hw_register(dev, &pll_10nm->base.clk_hw); + if (ret) + return ret; + + hws[num++] = &pll_10nm->base.clk_hw; + + snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); + snprintf(parent, 32, "dsi%dvco_clk", pll_10nm->id); + + hw = clk_hw_register_divider(dev, clk_name, + parent, CLK_SET_RATE_PARENT, + pll_10nm->mmio + + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, + 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + + snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); + + /* BIT CLK: DIV_CTRL_3_0 */ + hw = clk_hw_register_divider(dev, clk_name, parent, + CLK_SET_RATE_PARENT, + pll_10nm->phy_cmn_mmio + + REG_DSI_10nm_PHY_CMN_CLK_CFG0, + 0, 4, CLK_DIVIDER_ONE_BASED, + &pll_10nm->postdiv_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + + snprintf(clk_name, 32, "dsi%dpllbyte", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); + + /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */ + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + CLK_SET_RATE_PARENT, 1, 8); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + hw_data->hws[DSI_BYTE_PLL_CLK] = hw; + + snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); + + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + 0, 1, 2); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + + snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); + + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + 0, 1, 4); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + + snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); + snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id); + snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); + snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id); + + hw = clk_hw_register_mux(dev, clk_name, + (const char *[]){ + parent, parent2, parent3, parent4 + }, 4, 0, pll_10nm->phy_cmn_mmio + + REG_DSI_10nm_PHY_CMN_CLK_CFG1, + 0, 2, 0, NULL); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + + snprintf(clk_name, 32, "dsi%dpll", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pclk_mux", pll_10nm->id); + + /* PIX CLK DIV : DIV_CTRL_7_4*/ + hw = clk_hw_register_divider(dev, clk_name, parent, + 0, pll_10nm->phy_cmn_mmio + + REG_DSI_10nm_PHY_CMN_CLK_CFG0, + 4, 4, CLK_DIVIDER_ONE_BASED, + &pll_10nm->postdiv_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + hw_data->hws[DSI_PIXEL_PLL_CLK] = hw; + + pll_10nm->num_hws = num; + + hw_data->num = NUM_PROVIDED_CLKS; + pll_10nm->hw_data = hw_data; + + ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, + pll_10nm->hw_data); + if (ret) { + dev_err(dev, "failed to register clk provider: %d\n", ret); + return ret; + } + + return 0; +} + +struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id) +{ + struct dsi_pll_10nm *pll_10nm; + struct msm_dsi_pll *pll; + int ret; + + if (!pdev) + return ERR_PTR(-ENODEV); + + pll_10nm = devm_kzalloc(&pdev->dev, sizeof(*pll_10nm), GFP_KERNEL); + if (!pll_10nm) + return ERR_PTR(-ENOMEM); + + DBG("DSI PLL%d", id); + + pll_10nm->pdev = pdev; + pll_10nm->id = id; + pll_10nm_list[id] = pll_10nm; + + pll_10nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); + if (IS_ERR_OR_NULL(pll_10nm->phy_cmn_mmio)) { + dev_err(&pdev->dev, "failed to map CMN PHY base\n"); + return ERR_PTR(-ENOMEM); + } + + pll_10nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); + if (IS_ERR_OR_NULL(pll_10nm->mmio)) { + dev_err(&pdev->dev, "failed to map PLL base\n"); + return ERR_PTR(-ENOMEM); + } + + pll = &pll_10nm->base; + pll->min_rate = 1000000000UL; + pll->max_rate = 3500000000UL; + pll->get_provider = dsi_pll_10nm_get_provider; + pll->destroy = dsi_pll_10nm_destroy; + pll->save_state = dsi_pll_10nm_save_state; + pll->restore_state = dsi_pll_10nm_restore_state; + pll->set_usecase = dsi_pll_10nm_set_usecase; + + pll_10nm->vco_delay = 1; + + ret = pll_10nm_register(pll_10nm); + if (ret) { + dev_err(&pdev->dev, "failed to register PLL: %d\n", ret); + return ERR_PTR(ret); + } + + /* TODO: Remove this when we have proper display handover support */ + msm_dsi_pll_save_state(pll); + + return pll; +} |