7 files changed, 54 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 1ca70f9abc8d..714b2bc96f23 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4923,6 +4923,13 @@ intel_ddi_max_lanes(struct intel_digital_port *dig_port)
 	return max_lanes;
 }
 
+static bool hti_uses_phy(struct drm_i915_private *i915, enum phy phy)
+{
+	return i915->hti_state & HDPORT_ENABLED &&
+		(i915->hti_state & HDPORT_PHY_USED_DP(phy) ||
+		 i915->hti_state & HDPORT_PHY_USED_HDMI(phy));
+}
+
 void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 {
 	struct intel_digital_port *dig_port;
@@ -4930,6 +4937,18 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	bool init_hdmi, init_dp, init_lspcon = false;
 	enum phy phy = intel_port_to_phy(dev_priv, port);
 
+	/*
+	 * On platforms with HTI (aka HDPORT), if it's enabled at boot it may
+	 * have taken over some of the PHYs and made them unavailable to the
+	 * driver.  In that case we should skip initializing the corresponding
+	 * outputs.
+	 */
+	if (hti_uses_phy(dev_priv, phy)) {
+		drm_dbg_kms(&dev_priv->drm, "PORT %c / PHY %c reserved by HTI\n",
+			    port_name(port), phy_name(phy));
+		return;
+	}
+
 	init_hdmi = intel_bios_port_supports_dvi(dev_priv, port) ||
 		intel_bios_port_supports_hdmi(dev_priv, port);
 	init_dp = intel_bios_port_supports_dp(dev_priv, port);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 6cb66580ad2c..db2a5a1a9b35 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -47,6 +47,7 @@
 #include "display/intel_ddi.h"
 #include "display/intel_dp.h"
 #include "display/intel_dp_mst.h"
+#include "display/intel_dpll_mgr.h"
 #include "display/intel_dsi.h"
 #include "display/intel_dvo.h"
 #include "display/intel_gmbus.h"
@@ -17903,6 +17904,13 @@ int intel_modeset_init(struct drm_i915_private *i915)
 	if (i915->max_cdclk_freq == 0)
 		intel_update_max_cdclk(i915);
 
+	/*
+	 * If the platform has HTI, we need to find out whether it has reserved
+	 * any display resources before we create our display outputs.
+	 */
+	if (INTEL_INFO(i915)->display.has_hti)
+		i915->hti_state = intel_de_read(i915, HDPORT_STATE);
+
 	/* Just disable it once at startup */
 	intel_vga_disable(i915);
 	intel_setup_outputs(i915);
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 134c2ecf4c80..81ab975fe4f0 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3475,6 +3475,14 @@ static void icl_update_active_dpll(struct intel_atomic_state *state,
 	icl_set_active_port_dpll(crtc_state, port_dpll_id);
 }
 
+static u32 intel_get_hti_plls(struct drm_i915_private *i915)
+{
+	if (!(i915->hti_state & HDPORT_ENABLED))
+		return 0;
+
+	return REG_FIELD_GET(HDPORT_DPLL_USED_MASK, i915->hti_state);
+}
+
 static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
 				   struct intel_crtc *crtc,
 				   struct intel_encoder *encoder)
@@ -3518,6 +3526,9 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
 		dpll_mask = BIT(DPLL_ID_ICL_DPLL1) | BIT(DPLL_ID_ICL_DPLL0);
 	}
 
+	/* Eliminate DPLLs from consideration if reserved by HTI */
+	dpll_mask &= ~intel_get_hti_plls(dev_priv);
+
 	port_dpll->pll = intel_find_shared_dpll(state, crtc,
 						&port_dpll->hw_state,
 						dpll_mask);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e4f7f6518945..56dfc6d98caa 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1045,6 +1045,14 @@ struct drm_i915_private {
 	struct intel_l3_parity l3_parity;
 
 	/*
+	 * HTI (aka HDPORT) state read during initial hw readout.  Most
+	 * platforms don't have HTI, so this will just stay 0.  Those that do
+	 * will use this later to figure out which PLLs and PHYs are unavailable
+	 * for driver usage.
+	 */
+	u32 hti_state;
+
+	/*
 	 * edram size in MB.
 	 * Cannot be determined by PCIID. You must always read a register.
 	 */
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 2338f92ce490..366ddfc8df6b 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -890,6 +890,7 @@ static const struct intel_device_info rkl_info = {
 	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) |
 		BIT(TRANSCODER_C),
 	.require_force_probe = 1,
+	.display.has_hti = 1,
 	.display.has_psr_hw_tracking = 0,
 	.platform_engine_mask =
 		BIT(RCS0) | BIT(BCS0) | BIT(VECS0) | BIT(VCS0),
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index bfdb6d23b5d8..89a9f2d8110e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2921,6 +2921,12 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define MBUS_BBOX_CTL_S1		_MMIO(0x45040)
 #define MBUS_BBOX_CTL_S2		_MMIO(0x45044)
 
+#define HDPORT_STATE			_MMIO(0x45050)
+#define   HDPORT_DPLL_USED_MASK		REG_GENMASK(14, 12)
+#define   HDPORT_PHY_USED_DP(phy)	REG_BIT(2 * (phy) + 2)
+#define   HDPORT_PHY_USED_HDMI(phy)	REG_BIT(2 * (phy) + 1)
+#define   HDPORT_ENABLED		REG_BIT(0)
+
 /* Make render/texture TLB fetches lower priorty than associated data
  *   fetches. This is not turned on by default
  */
diff --git a/drivers/gpu/drm/i915/intel_device_info.h b/drivers/gpu/drm/i915/intel_device_info.h
index fd2385457ab6..6a3d607218aa 100644
--- a/drivers/gpu/drm/i915/intel_device_info.h
+++ b/drivers/gpu/drm/i915/intel_device_info.h
@@ -146,6 +146,7 @@ enum intel_ppgtt_type {
 	func(has_gmch); \
 	func(has_hdcp); \
 	func(has_hotplug); \
+	func(has_hti); \
 	func(has_ipc); \
 	func(has_modular_fia); \
 	func(has_overlay); \