diff options
Diffstat (limited to 'drivers/gpu/drm/i915/vlv_dsi.c')
| -rw-r--r-- | drivers/gpu/drm/i915/vlv_dsi.c | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c index bfe2891eac37..c94e58d0ce40 100644 --- a/drivers/gpu/drm/i915/vlv_dsi.c +++ b/drivers/gpu/drm/i915/vlv_dsi.c @@ -1669,6 +1669,174 @@ static void intel_dsi_add_properties(struct intel_connector *connector) } } +#define NS_KHZ_RATIO 1000000 + +#define PREPARE_CNT_MAX 0x3F +#define EXIT_ZERO_CNT_MAX 0x3F +#define CLK_ZERO_CNT_MAX 0xFF +#define TRAIL_CNT_MAX 0x1F + +static void vlv_dphy_param_init(struct intel_dsi *intel_dsi) +{ + struct drm_device *dev = intel_dsi->base.base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct mipi_config *mipi_config = dev_priv->vbt.dsi.config; + u32 tlpx_ns, extra_byte_count, tlpx_ui; + u32 ui_num, ui_den; + u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt; + u32 ths_prepare_ns, tclk_trail_ns; + u32 tclk_prepare_clkzero, ths_prepare_hszero; + u32 lp_to_hs_switch, hs_to_lp_switch; + u32 mul; + + tlpx_ns = intel_dsi_tlpx_ns(intel_dsi); + + switch (intel_dsi->lane_count) { + case 1: + case 2: + extra_byte_count = 2; + break; + case 3: + extra_byte_count = 4; + break; + case 4: + default: + extra_byte_count = 3; + break; + } + + /* in Kbps */ + ui_num = NS_KHZ_RATIO; + ui_den = intel_dsi_bitrate(intel_dsi); + + tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero; + ths_prepare_hszero = mipi_config->ths_prepare_hszero; + + /* + * B060 + * LP byte clock = TLPX/ (8UI) + */ + intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num); + + /* DDR clock period = 2 * UI + * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ) + * UI(nsec) = 10^6 / bitrate + * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate + * DDR clock count = ns_value / DDR clock period + * + * For GEMINILAKE dphy_param_reg will be programmed in terms of + * HS byte clock count for other platform in HS ddr clock count + */ + mul = IS_GEMINILAKE(dev_priv) ? 8 : 2; + ths_prepare_ns = max(mipi_config->ths_prepare, + mipi_config->tclk_prepare); + + /* prepare count */ + prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul); + + if (prepare_cnt > PREPARE_CNT_MAX) { + DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt); + prepare_cnt = PREPARE_CNT_MAX; + } + + /* exit zero count */ + exit_zero_cnt = DIV_ROUND_UP( + (ths_prepare_hszero - ths_prepare_ns) * ui_den, + ui_num * mul + ); + + /* + * Exit zero is unified val ths_zero and ths_exit + * minimum value for ths_exit = 110ns + * min (exit_zero_cnt * 2) = 110/UI + * exit_zero_cnt = 55/UI + */ + if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num) + exit_zero_cnt += 1; + + if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) { + DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt); + exit_zero_cnt = EXIT_ZERO_CNT_MAX; + } + + /* clk zero count */ + clk_zero_cnt = DIV_ROUND_UP( + (tclk_prepare_clkzero - ths_prepare_ns) + * ui_den, ui_num * mul); + + if (clk_zero_cnt > CLK_ZERO_CNT_MAX) { + DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt); + clk_zero_cnt = CLK_ZERO_CNT_MAX; + } + + /* trail count */ + tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail); + trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul); + + if (trail_cnt > TRAIL_CNT_MAX) { + DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt); + trail_cnt = TRAIL_CNT_MAX; + } + + /* B080 */ + intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 | + clk_zero_cnt << 8 | prepare_cnt; + + /* + * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT * + * mul + 10UI + Extra Byte Count + * + * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count + * Extra Byte Count is calculated according to number of lanes. + * High Low Switch Count is the Max of LP to HS and + * HS to LP switch count + * + */ + tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num); + + /* B044 */ + /* FIXME: + * The comment above does not match with the code */ + lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul + + exit_zero_cnt * mul + 10, 8); + + hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8); + + intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch); + intel_dsi->hs_to_lp_count += extra_byte_count; + + /* B088 */ + /* LP -> HS for clock lanes + * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero + + * extra byte count + * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt * + * 2(in UI) + extra byte count + * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) / + * 8 + extra byte count + */ + intel_dsi->clk_lp_to_hs_count = + DIV_ROUND_UP( + 4 * tlpx_ui + prepare_cnt * 2 + + clk_zero_cnt * 2, + 8); + + intel_dsi->clk_lp_to_hs_count += extra_byte_count; + + /* HS->LP for Clock Lanes + * Low Power clock synchronisations + 1Tx byteclk + tclk_trail + + * Extra byte count + * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count + * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 + + * Extra byte count + */ + intel_dsi->clk_hs_to_lp_count = + DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8, + 8); + intel_dsi->clk_hs_to_lp_count += extra_byte_count; + + intel_dsi_log_params(intel_dsi); +} + void vlv_dsi_init(struct drm_i915_private *dev_priv) { struct drm_device *dev = &dev_priv->drm; @@ -1758,6 +1926,8 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv) goto err; } + vlv_dphy_param_init(intel_dsi); + /* * In case of BYT with CRC PMIC, we need to use GPIO for * Panel control. |