summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_display.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
-rw-r--r--drivers/gpu/drm/i915/intel_display.c78
1 files changed, 56 insertions, 22 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 14c45b1e8778..bdea9464b678 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -977,14 +977,54 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
return true;
}
-void
-intel_wait_for_vblank(struct drm_device *dev)
+/**
+ * intel_wait_for_vblank - wait for vblank on a given pipe
+ * @dev: drm device
+ * @pipe: pipe to wait for
+ *
+ * Wait for vblank to occur on a given pipe. Needed for various bits of
+ * mode setting code.
+ */
+void intel_wait_for_vblank(struct drm_device *dev, int pipe)
{
- /* Wait for 20ms, i.e. one cycle at 50hz. */
- if (in_dbg_master())
- mdelay(20); /* The kernel debugger cannot call msleep() */
- else
- msleep(20);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipestat_reg = (pipe == 0 ? PIPEASTAT : PIPEBSTAT);
+
+ /* Wait for vblank interrupt bit to set */
+ if (wait_for((I915_READ(pipestat_reg) &
+ PIPE_VBLANK_INTERRUPT_STATUS) == 0,
+ 50, 0))
+ DRM_DEBUG_KMS("vblank wait timed out\n");
+}
+
+/**
+ * intel_wait_for_vblank_off - wait for vblank after disabling a pipe
+ * @dev: drm device
+ * @pipe: pipe to wait for
+ *
+ * After disabling a pipe, we can't wait for vblank in the usual way,
+ * spinning on the vblank interrupt status bit, since we won't actually
+ * see an interrupt when the pipe is disabled.
+ *
+ * So this function waits for the display line value to settle (it
+ * usually ends up stopping at the start of the next frame).
+ */
+void intel_wait_for_vblank_off(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
+ unsigned long timeout = jiffies + msecs_to_jiffies(100);
+ u32 last_line;
+
+ /* Wait for the display line to settle */
+ do {
+ last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
+ mdelay(5);
+ } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
+ time_after(timeout, jiffies));
+
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("vblank wait timed out\n");
}
/* Parameters have changed, update FBC info */
@@ -1057,8 +1097,6 @@ void i8xx_disable_fbc(struct drm_device *dev)
return;
}
- intel_wait_for_vblank(dev);
-
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1115,7 +1153,6 @@ void g4x_disable_fbc(struct drm_device *dev)
dpfc_ctl = I915_READ(DPFC_CONTROL);
dpfc_ctl &= ~DPFC_CTL_EN;
I915_WRITE(DPFC_CONTROL, dpfc_ctl);
- intel_wait_for_vblank(dev);
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1176,7 +1213,6 @@ void ironlake_disable_fbc(struct drm_device *dev)
dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
dpfc_ctl &= ~DPFC_CTL_EN;
I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
- intel_wait_for_vblank(dev);
DRM_DEBUG_KMS("disabled FBC\n");
}
@@ -1475,7 +1511,7 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
if ((IS_I965G(dev) || plane == 0))
intel_update_fbc(crtc, &crtc->mode);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_increase_pllclock(crtc, true);
return 0;
@@ -1593,7 +1629,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
if ((IS_I965G(dev) || plane == 0))
intel_update_fbc(crtc, &crtc->mode);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
if (old_fb) {
intel_fb = to_intel_framebuffer(old_fb);
@@ -2343,10 +2379,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_READ(dspbase_reg);
}
- if (!IS_I9XX(dev)) {
- /* Wait for vblank for the disable to take effect */
- intel_wait_for_vblank(dev);
- }
+ /* Wait for vblank for the disable to take effect */
+ intel_wait_for_vblank_off(dev, pipe);
/* Don't disable pipe A or pipe A PLLs if needed */
if (pipeconf_reg == PIPEACONF &&
@@ -2361,7 +2395,7 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
}
/* Wait for vblank for the disable to take effect. */
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank_off(dev, pipe);
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) != 0) {
@@ -4096,7 +4130,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(pipeconf_reg, pipeconf);
I915_READ(pipeconf_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
if (IS_IRONLAKE(dev)) {
/* enable address swizzle for tiling buffer */
@@ -4508,7 +4542,7 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
encoder_funcs->commit(encoder);
}
/* let the connector get through one full cycle before testing */
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
return crtc;
}
@@ -4713,7 +4747,7 @@ static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule)
dpll &= ~DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
dpll = I915_READ(dpll_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
dpll = I915_READ(dpll_reg);
if (dpll & DISPLAY_RATE_SELECT_FPA1)
DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
@@ -4757,7 +4791,7 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc)
dpll |= DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
dpll = I915_READ(dpll_reg);
- intel_wait_for_vblank(dev);
+ intel_wait_for_vblank(dev, pipe);
dpll = I915_READ(dpll_reg);
if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 11:30:41 +0000