diff options
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/Kconfig | 11 | ||||
-rw-r--r-- | drivers/gpio/gpio-adp5520.c | 12 | ||||
-rw-r--r-- | drivers/gpio/gpio-adp5588.c | 5 | ||||
-rw-r--r-- | drivers/gpio/gpio-bt8xx.c | 3 | ||||
-rw-r--r-- | drivers/gpio/gpio-cs5535.c | 14 | ||||
-rw-r--r-- | drivers/gpio/gpio-da9052.c | 12 | ||||
-rw-r--r-- | drivers/gpio/gpio-generic.c | 12 | ||||
-rw-r--r-- | drivers/gpio/gpio-janz-ttl.c | 15 | ||||
-rw-r--r-- | drivers/gpio/gpio-nomadik.c | 4 | ||||
-rw-r--r-- | drivers/gpio/gpio-pcf857x.c | 5 | ||||
-rw-r--r-- | drivers/gpio/gpio-pch.c | 7 | ||||
-rw-r--r-- | drivers/gpio/gpio-rdc321x.c | 13 | ||||
-rw-r--r-- | drivers/gpio/gpio-samsung.c | 31 | ||||
-rw-r--r-- | drivers/gpio/gpio-sch.c | 13 | ||||
-rw-r--r-- | drivers/gpio/gpio-timberdale.c | 13 | ||||
-rw-r--r-- | drivers/gpio/gpio-ucb1400.c | 13 | ||||
-rw-r--r-- | drivers/gpio/gpio-vr41xx.c | 13 | ||||
-rw-r--r-- | drivers/gpio/gpio-vx855.c | 12 | ||||
-rw-r--r-- | drivers/gpio/gpio-wm8994.c | 79 | ||||
-rw-r--r-- | drivers/gpio/gpio-xilinx.c | 1 | ||||
-rw-r--r-- | drivers/gpio/gpiolib.c | 6 |
21 files changed, 128 insertions, 166 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 8482a23887dc..4e04157a3683 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -387,7 +387,7 @@ config GPIO_LANGWELL Say Y here to support Intel Langwell/Penwell GPIO. config GPIO_PCH - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO" + tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" depends on PCI && X86 select GENERIC_IRQ_CHIP help @@ -395,11 +395,12 @@ config GPIO_PCH which is an IOH(Input/Output Hub) for x86 embedded processor. This driver can access PCH GPIO device. - This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7223. + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7223 and ML7831. ML7223 IOH is for MP(Media Phone) use. - ML7223 is companion chip for Intel Atom E6xx series. - ML7223 is completely compatible for Intel EG20T PCH. + ML7831 IOH is for general purpose use. + ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7223/ML7831 is completely compatible for Intel EG20T PCH. config GPIO_ML_IOH tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" diff --git a/drivers/gpio/gpio-adp5520.c b/drivers/gpio/gpio-adp5520.c index 9f2781537001..2f263cc32561 100644 --- a/drivers/gpio/gpio-adp5520.c +++ b/drivers/gpio/gpio-adp5520.c @@ -193,17 +193,7 @@ static struct platform_driver adp5520_gpio_driver = { .remove = __devexit_p(adp5520_gpio_remove), }; -static int __init adp5520_gpio_init(void) -{ - return platform_driver_register(&adp5520_gpio_driver); -} -module_init(adp5520_gpio_init); - -static void __exit adp5520_gpio_exit(void) -{ - platform_driver_unregister(&adp5520_gpio_driver); -} -module_exit(adp5520_gpio_exit); +module_platform_driver(adp5520_gpio_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("GPIO ADP5520 Driver"); diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c index 3525ad918771..9ad1703d1408 100644 --- a/drivers/gpio/gpio-adp5588.c +++ b/drivers/gpio/gpio-adp5588.c @@ -418,9 +418,8 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client, if (ret) goto err_irq; - dev_info(&client->dev, "gpios %d..%d (IRQ Base %d) on a %s Rev. %d\n", - gc->base, gc->base + gc->ngpio - 1, - pdata->irq_base, client->name, revid); + dev_info(&client->dev, "IRQ Base: %d Rev.: %d\n", + pdata->irq_base, revid); if (pdata->setup) { ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context); diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c index ec57936aef62..5ca4098ba092 100644 --- a/drivers/gpio/gpio-bt8xx.c +++ b/drivers/gpio/gpio-bt8xx.c @@ -223,9 +223,6 @@ static int bt8xxgpio_probe(struct pci_dev *dev, goto err_release_mem; } - printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n", - bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1); - return 0; err_release_mem: diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c index 6e16cba56ad2..19eda1bbe343 100644 --- a/drivers/gpio/gpio-cs5535.c +++ b/drivers/gpio/gpio-cs5535.c @@ -347,7 +347,6 @@ static int __devinit cs5535_gpio_probe(struct platform_device *pdev) if (err) goto release_region; - dev_info(&pdev->dev, "GPIO support successfully loaded.\n"); return 0; release_region: @@ -382,18 +381,7 @@ static struct platform_driver cs5535_gpio_driver = { .remove = __devexit_p(cs5535_gpio_remove), }; -static int __init cs5535_gpio_init(void) -{ - return platform_driver_register(&cs5535_gpio_driver); -} - -static void __exit cs5535_gpio_exit(void) -{ - platform_driver_unregister(&cs5535_gpio_driver); -} - -module_init(cs5535_gpio_init); -module_exit(cs5535_gpio_exit); +module_platform_driver(cs5535_gpio_driver); MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>"); MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver"); diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c index f8ce29ef9f88..56dd047d5844 100644 --- a/drivers/gpio/gpio-da9052.c +++ b/drivers/gpio/gpio-da9052.c @@ -254,17 +254,7 @@ static struct platform_driver da9052_gpio_driver = { }, }; -static int __init da9052_gpio_init(void) -{ - return platform_driver_register(&da9052_gpio_driver); -} -module_init(da9052_gpio_init); - -static void __exit da9052_gpio_exit(void) -{ - return platform_driver_unregister(&da9052_gpio_driver); -} -module_exit(da9052_gpio_exit); +module_platform_driver(da9052_gpio_driver); MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); MODULE_DESCRIPTION("DA9052 GPIO Device Driver"); diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c index 4e24436b0f82..e38dd0c31973 100644 --- a/drivers/gpio/gpio-generic.c +++ b/drivers/gpio/gpio-generic.c @@ -524,17 +524,7 @@ static struct platform_driver bgpio_driver = { .remove = __devexit_p(bgpio_pdev_remove), }; -static int __init bgpio_platform_init(void) -{ - return platform_driver_register(&bgpio_driver); -} -module_init(bgpio_platform_init); - -static void __exit bgpio_platform_exit(void) -{ - platform_driver_unregister(&bgpio_driver); -} -module_exit(bgpio_platform_exit); +module_platform_driver(bgpio_driver); #endif /* CONFIG_GPIO_GENERIC_PLATFORM */ diff --git a/drivers/gpio/gpio-janz-ttl.c b/drivers/gpio/gpio-janz-ttl.c index 813ac077e5d7..f2f000dd70b3 100644 --- a/drivers/gpio/gpio-janz-ttl.c +++ b/drivers/gpio/gpio-janz-ttl.c @@ -201,8 +201,6 @@ static int __devinit ttl_probe(struct platform_device *pdev) goto out_iounmap_regs; } - dev_info(&pdev->dev, "module %d: registered GPIO device\n", - pdata->modno); return 0; out_iounmap_regs: @@ -239,20 +237,9 @@ static struct platform_driver ttl_driver = { .remove = __devexit_p(ttl_remove), }; -static int __init ttl_init(void) -{ - return platform_driver_register(&ttl_driver); -} - -static void __exit ttl_exit(void) -{ - platform_driver_unregister(&ttl_driver); -} +module_platform_driver(ttl_driver); MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>"); MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:janz-ttl"); - -module_init(ttl_init); -module_exit(ttl_exit); diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c index 1ebedfb6d46d..839624f9fe6a 100644 --- a/drivers/gpio/gpio-nomadik.c +++ b/drivers/gpio/gpio-nomadik.c @@ -1150,8 +1150,8 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) nmk_gpio_init_irq(nmk_chip); - dev_info(&dev->dev, "Bits %i-%i at address %p\n", - nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); + dev_info(&dev->dev, "at address %p\n", + nmk_chip->addr); return 0; out_free: diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c index 3e1f1ecd07be..2d1de9e7e9bd 100644 --- a/drivers/gpio/gpio-pcf857x.c +++ b/drivers/gpio/gpio-pcf857x.c @@ -290,10 +290,7 @@ static int pcf857x_probe(struct i2c_client *client, * methods can't be called from sleeping contexts. */ - dev_info(&client->dev, "gpios %d..%d on a %s%s\n", - gpio->chip.base, - gpio->chip.base + gpio->chip.ngpio - 1, - client->name, + dev_info(&client->dev, "%s\n", client->irq ? " (irq ignored)" : ""); /* Let platform code set up the GPIOs and their users. diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c index a6008e123d04..f0603297f829 100644 --- a/drivers/gpio/gpio-pch.c +++ b/drivers/gpio/gpio-pch.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -49,8 +49,8 @@ struct pch_regs { enum pch_type_t { INTEL_EG20T_PCH, - OKISEMI_ML7223m_IOH, /* OKISEMI ML7223 IOH PCIe Bus-m */ - OKISEMI_ML7223n_IOH /* OKISEMI ML7223 IOH PCIe Bus-n */ + OKISEMI_ML7223m_IOH, /* LAPIS Semiconductor ML7223 IOH PCIe Bus-m */ + OKISEMI_ML7223n_IOH /* LAPIS Semiconductor ML7223 IOH PCIe Bus-n */ }; /* Specifies number of GPIO PINS */ @@ -524,6 +524,7 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) }, { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) }, { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) }, + { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8803) }, { 0, } }; MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id); diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c index 2762698e0204..e97016af6443 100644 --- a/drivers/gpio/gpio-rdc321x.c +++ b/drivers/gpio/gpio-rdc321x.c @@ -227,18 +227,7 @@ static struct platform_driver rdc321x_gpio_driver = { .remove = __devexit_p(rdc321x_gpio_remove), }; -static int __init rdc321x_gpio_init(void) -{ - return platform_driver_register(&rdc321x_gpio_driver); -} - -static void __exit rdc321x_gpio_exit(void) -{ - platform_driver_unregister(&rdc321x_gpio_driver); -} - -module_init(rdc321x_gpio_init); -module_exit(rdc321x_gpio_exit); +module_platform_driver(rdc321x_gpio_driver); MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); MODULE_DESCRIPTION("RDC321x GPIO driver"); diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index dcbe4541fe49..ab098ba9f1dd 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -230,7 +230,7 @@ static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip, * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * - * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg + * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which * could be directly passed back to samsung_gpio_setcfg_2bit(), from the * S3C_GPIO_SPECIAL() macro. */ @@ -467,33 +467,42 @@ static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = { #endif static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { - { + [0] = { .cfg_eint = 0x0, - }, { + }, + [1] = { .cfg_eint = 0x3, - }, { + }, + [2] = { .cfg_eint = 0x7, - }, { + }, + [3] = { .cfg_eint = 0xF, - }, { + }, + [4] = { .cfg_eint = 0x0, .set_config = samsung_gpio_setcfg_2bit, .get_config = samsung_gpio_getcfg_2bit, - }, { + }, + [5] = { .cfg_eint = 0x2, .set_config = samsung_gpio_setcfg_2bit, .get_config = samsung_gpio_getcfg_2bit, - }, { + }, + [6] = { .cfg_eint = 0x3, .set_config = samsung_gpio_setcfg_2bit, .get_config = samsung_gpio_getcfg_2bit, - }, { + }, + [7] = { .set_config = samsung_gpio_setcfg_2bit, .get_config = samsung_gpio_getcfg_2bit, - }, { + }, + [8] = { .set_pull = exynos4_gpio_setpull, .get_pull = exynos4_gpio_getpull, - }, { + }, + [9] = { .cfg_eint = 0x3, .set_pull = exynos4_gpio_setpull, .get_pull = exynos4_gpio_getpull, diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index 163515845494..8cadf4d683a8 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -297,18 +297,7 @@ static struct platform_driver sch_gpio_driver = { .remove = __devexit_p(sch_gpio_remove), }; -static int __init sch_gpio_init(void) -{ - return platform_driver_register(&sch_gpio_driver); -} - -static void __exit sch_gpio_exit(void) -{ - platform_driver_unregister(&sch_gpio_driver); -} - -module_init(sch_gpio_init); -module_exit(sch_gpio_exit); +module_platform_driver(sch_gpio_driver); MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH"); diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c index c593bd46bfb6..031c6adf5b65 100644 --- a/drivers/gpio/gpio-timberdale.c +++ b/drivers/gpio/gpio-timberdale.c @@ -359,18 +359,7 @@ static struct platform_driver timbgpio_platform_driver = { /*--------------------------------------------------------------------------*/ -static int __init timbgpio_init(void) -{ - return platform_driver_register(&timbgpio_platform_driver); -} - -static void __exit timbgpio_exit(void) -{ - platform_driver_unregister(&timbgpio_platform_driver); -} - -module_init(timbgpio_init); -module_exit(timbgpio_exit); +module_platform_driver(timbgpio_platform_driver); MODULE_DESCRIPTION("Timberdale GPIO driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c index 50e6bd1392ce..26405efe0f9f 100644 --- a/drivers/gpio/gpio-ucb1400.c +++ b/drivers/gpio/gpio-ucb1400.c @@ -103,23 +103,12 @@ static struct platform_driver ucb1400_gpio_driver = { }, }; -static int __init ucb1400_gpio_init(void) -{ - return platform_driver_register(&ucb1400_gpio_driver); -} - -static void __exit ucb1400_gpio_exit(void) -{ - platform_driver_unregister(&ucb1400_gpio_driver); -} - void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) { ucbdata = data; } -module_init(ucb1400_gpio_init); -module_exit(ucb1400_gpio_exit); +module_platform_driver(ucb1400_gpio_driver); MODULE_DESCRIPTION("Philips UCB1400 GPIO driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c index 98723cb9ac68..82d5c20ad3cb 100644 --- a/drivers/gpio/gpio-vr41xx.c +++ b/drivers/gpio/gpio-vr41xx.c @@ -571,15 +571,4 @@ static struct platform_driver giu_device_driver = { }, }; -static int __init vr41xx_giu_init(void) -{ - return platform_driver_register(&giu_device_driver); -} - -static void __exit vr41xx_giu_exit(void) -{ - platform_driver_unregister(&giu_device_driver); -} - -module_init(vr41xx_giu_init); -module_exit(vr41xx_giu_exit); +module_platform_driver(giu_device_driver); diff --git a/drivers/gpio/gpio-vx855.c b/drivers/gpio/gpio-vx855.c index ef5aabd8b8b7..76ebfe5ff702 100644 --- a/drivers/gpio/gpio-vx855.c +++ b/drivers/gpio/gpio-vx855.c @@ -315,17 +315,7 @@ static struct platform_driver vx855gpio_driver = { .remove = __devexit_p(vx855gpio_remove), }; -static int vx855gpio_init(void) -{ - return platform_driver_register(&vx855gpio_driver); -} -module_init(vx855gpio_init); - -static void vx855gpio_exit(void) -{ - platform_driver_unregister(&vx855gpio_driver); -} -module_exit(vx855gpio_exit); +module_platform_driver(vx855gpio_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>"); diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c index 96198f3fab73..92ea5350dfe9 100644 --- a/drivers/gpio/gpio-wm8994.c +++ b/drivers/gpio/gpio-wm8994.c @@ -117,6 +117,60 @@ static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset) #ifdef CONFIG_DEBUG_FS +static const char *wm8994_gpio_fn(u16 fn) +{ + switch (fn) { + case WM8994_GP_FN_PIN_SPECIFIC: + return "pin-specific"; + case WM8994_GP_FN_GPIO: + return "GPIO"; + case WM8994_GP_FN_SDOUT: + return "SDOUT"; + case WM8994_GP_FN_IRQ: + return "IRQ"; + case WM8994_GP_FN_TEMPERATURE: + return "Temperature"; + case WM8994_GP_FN_MICBIAS1_DET: + return "MICBIAS1 detect"; + case WM8994_GP_FN_MICBIAS1_SHORT: + return "MICBIAS1 short"; + case WM8994_GP_FN_MICBIAS2_DET: + return "MICBIAS2 detect"; + case WM8994_GP_FN_MICBIAS2_SHORT: + return "MICBIAS2 short"; + case WM8994_GP_FN_FLL1_LOCK: + return "FLL1 lock"; + case WM8994_GP_FN_FLL2_LOCK: + return "FLL2 lock"; + case WM8994_GP_FN_SRC1_LOCK: + return "SRC1 lock"; + case WM8994_GP_FN_SRC2_LOCK: + return "SRC2 lock"; + case WM8994_GP_FN_DRC1_ACT: + return "DRC1 activity"; + case WM8994_GP_FN_DRC2_ACT: + return "DRC2 activity"; + case WM8994_GP_FN_DRC3_ACT: + return "DRC3 activity"; + case WM8994_GP_FN_WSEQ_STATUS: + return "Write sequencer"; + case WM8994_GP_FN_FIFO_ERROR: + return "FIFO error"; + case WM8994_GP_FN_OPCLK: + return "OPCLK"; + case WM8994_GP_FN_THW: + return "Thermal warning"; + case WM8994_GP_FN_DCS_DONE: + return "DC servo"; + case WM8994_GP_FN_FLL1_OUT: + return "FLL1 output"; + case WM8994_GP_FN_FLL2_OUT: + return "FLL1 output"; + default: + return "Unknown"; + } +} + static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) { struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip); @@ -148,8 +202,29 @@ static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) continue; } - /* No decode yet; note that GPIO2 is special */ - seq_printf(s, "(%x)\n", reg); + if (reg & WM8994_GPN_DIR) + seq_printf(s, "in "); + else + seq_printf(s, "out "); + + if (reg & WM8994_GPN_PU) + seq_printf(s, "pull up "); + + if (reg & WM8994_GPN_PD) + seq_printf(s, "pull down "); + + if (reg & WM8994_GPN_POL) + seq_printf(s, "inverted "); + else + seq_printf(s, "noninverted "); + + if (reg & WM8994_GPN_OP_CFG) + seq_printf(s, "open drain "); + else + seq_printf(s, "CMOS "); + + seq_printf(s, "%s (%x)\n", + wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg); } } #else diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c index 0ce6ac9898b1..79b0fe8a7253 100644 --- a/drivers/gpio/gpio-xilinx.c +++ b/drivers/gpio/gpio-xilinx.c @@ -206,7 +206,6 @@ static int __devinit xgpio_of_probe(struct device_node *np) np->full_name, status); return status; } - pr_info("XGpio: %s: registered\n", np->full_name); return 0; } diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index a971e3d043ba..17fdf4b6af93 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -114,7 +114,7 @@ static int gpio_ensure_requested(struct gpio_desc *desc, unsigned offset) } /* caller holds gpio_lock *OR* gpio is marked as requested */ -static inline struct gpio_chip *gpio_to_chip(unsigned gpio) +struct gpio_chip *gpio_to_chip(unsigned gpio) { return gpio_desc[gpio].chip; } @@ -1089,6 +1089,10 @@ unlock: if (status) goto fail; + pr_info("gpiochip_add: registered GPIOs %d to %d on device: %s\n", + chip->base, chip->base + chip->ngpio - 1, + chip->label ? : "generic"); + return 0; fail: /* failures here can mean systems won't boot... */ |